Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Strain rate dependent in-situ micro damage analysis
Lienhard, J.; Huberth, F.
Conference Paper
2018Detailed characterisation of focused ion beam induced lateral damage on silicon carbide samples by electrical scanning probe microscopy and transmission electron microscopy
Stumpf, Florian; Abu Quba, A.A.; Singer, Philip; Rumler, Maximilian; Cherkashin, Nikolay; Schamm-Chardon, Sylvie; Cours, Robin; Rommel, Mathias
Journal Article
2018Modeling of anisotropic behavior of aluminum profile for damage prediction
Andrieux, F.; Sun, D.-Z.
Conference Paper
2017Challenge and procedure in joining process simulation of high-speed solid self-piercing riveting with LS-DYNA
Jesche, Fred; Kraus, Christian; Hensel, Sebastian
Conference Paper
2017Damage modelling of an aluminum cast alloy accounting for pore morphology
Andrieux, F.; Sun, D.-Z.; Burblies, A.
Conference Paper
2017Qualitative pivot damage analysis in aluminum printed pantographic sheets: Numerics and experiments
Spagnuolo, M.; Barcz, K.; Pfaff, Aron; dell'Isola, F.; Franciosi, P.
Journal Article
2016Efficient simulation of the crash behaviour of the dual phase steel HCT980X
Trondl, A.; Sun, D.-Z.; Andrieux, F.
Journal Article
2016XFEM modeling of interface failure in adhesively bonded fiber-reinforced polymers
Kästner, Markus; Müller, Sebastian; Hirsch, Franz; Pap, Jozsef-Sebastian; Jansen, Irene; Ulbricht, Volker
Journal Article
2014Modeling of the performance reduction of macro fiber composites for use in numerical forming simulation of piezoceramic-metal-compounds
Hensel, Sebastian; Drossel, Welf-Guntram; Nestler, Matthias; Müller, Roland
Journal Article
2014Prediction of damage in cold bulk forming processes
Zapara, M.; Augenstein, E.; Helm, D.
Conference Paper, Journal Article
2013Edge on Impact Simulations and Experiments
Leavy, R.; Clayton, J.; Strack, O.; Brannon, R.; Straßburger, E.
Conference Paper, Journal Article
2013Numerical simulation of organic binder decomposition during thermal debinding
Kraft, T.; Schmidt, I.; Riedel, H.; Svoboda, J.; Kestler, H.; Wagner, J.
Conference Paper
2012FE-Simulation beschichteter Umformwerkzeuge für hochfeste Aluminiumlegierungen
Neugebauer, Reimund; Schmidt, Gerhard; Oppermann, Christian; Wielage, Bernhard; Lampke, Thomas; Nehrkorn, Sissy
Journal Article
2011Ermittlung von Parametern ausgewählter Dünnschichtsysteme für die Simulation mit Hilfe der Nanoindentation
Wielage, B.; Lampke, T.; Rupprecht, C.; Nehrkorn, S.; Neugebauer, Reimund; Schmidt, G.; Oppermann, C.
Conference Paper
2011Mechanical joining with self piercing solid-rivets at elevated tool velocities
Neugebauer, Reimund; Jesche, F.; Kraus, C.; Hensel, S.
Conference Paper
2010Shot peening of brittle materials - status and outlook
Pfeiffer, W.; Wenzel, J.
Conference Paper
2009Silicon nitride wire-rolling tools: A failure-mode analysis and correlation with rolling-contact fatigue
Khader, I.; Kailer, A.
Conference Paper
2009Why is it important to avoid safely a water column separation after shutting down the power unit (e.g. vertical Kaplan unit for medium & high head) from normal over-speed condition and from runaway conditions?
Dudlik, A.
Conference Paper
2006Characterization and evaluation of composite laminates by nonlinear ultrasonic transmission measurements
Hirsekorn, S.; Rabe, U.; Arnold, W.
Conference Paper
2006Some remarks for improving the assessment of multiaxial stress state and multiaxial spectrum loading in the IIW-fatigue design recommendation
Sonsino, C.M.; Fricke, W.
Report
2005Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading
Sonsino, C.
Journal Article, Conference Paper
2004Cumulative damage of laserbeam welded thin automotive hollow structures of steel and aluminium
Sonsino, C.M.
Conference Paper
2004Strengthening of ceramics by shot peening
Pfeiffer, W.; Frey, T.
Conference Paper, Journal Article
2003Structural durability of cast aluminium gearbox housings of underground railway vehicles under variable amplitude loading
Sonsino, C.
Conference Paper
2001Concepts and Required Materials Data for Fatigue Design of PM Components
Sonsino, C.M.
Conference Paper
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
2001Multiaxial fatigue of welded joints under constant and variable amplitude loadings
Sonsino, C.M.; Küppers, M.
Journal Article
1999Materialermüdung. Modellbildungen zur Ermittlung der Betriebsfestigkeit technischer Konstruktionen
Seeger, T.; Sonsino, C.M.; Vormwald, M.; Amstutz, H.
Journal Article
1998Bemessung von Fahrzeugkomponenten auf Basis abgeleiteter Lastzeitfunktionen mittels numerischer Simulation
Wessling, U.; Rupp, A.
Conference Paper
1998Comparison of procedures for experimental and theoretical durability approval of a truck axle
Dini, A.; Rupp, A.
Report
1997Assessment and monitoring the environment of cultural property (AMECP Project)
Leissner, J.; Beuschlein, S.; Pilz, M.; Martin, G.; Blades, N.; Redol, P.
Journal Article
1997Hypervelocity Impact on Cylindrical Pressure Vessels - Experimental Results and Damage Classification
Schäfer, F.; Schneider, E.; Lambert, M.
Conference Paper
1997Nondestructive characterization of materials. A growing demand for describing damage and service-life-relevant aging processes in plant components
Dobmann, G.; Meyendorf, N.; Schneider, E.
Journal Article
1995Korrosionsschwingfestigkeit von punktgeschweißten, verzinkten Feinblechen des Fahrzeugbaus
Dietrich, K.; Sonsino, C.M.
Conference Paper
1995Übertragbarkeit von Werkstoffkennwerten am Beispiel eines betriebsfest auszulegenden geschmiedeten Nutzfahrzeug-Achsschenkels
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Journal Article
1994Bearbeitung und Charakterisierung von Bauteilen aus Hochleistungskeramik
Reiter, H.; Netzelmann, U.; Wagemann, A.; Verlemann, E.; Hollstein, T.; Pfeiffer, W.
Conference Paper
1994Charakterisierung von bearbeiteten Keramikoberflächen mittels akustischer Rastermikroskopie.
Pangraz, S.; Arnold, W.; Weides, G.
Conference Paper
1993Correlation between material properties and damage tolerance behaviour of composite structures
Gerharz, J.J.; Schöpfel, A.; Cvitkovich, M.; Huth, H.; Lang, R.W.
Conference Paper
1992Früherkennung von Kriechschäden - Zum Stand fortschrittlicher Zerstörungsfreier Prüfverfahren
Dobmann, G.; Koble, T.D.; Kröning, M.; Willems, H.
Conference Paper
1992Investigation of the reason for the softening behaviour of solid propellants.
Aksel, N.; Hübner, C.
Journal Article
1992Investigation of the softening behaviour of filled polymers
Aksel, N.; Hübner, C.
Conference Paper
1991The German experience with damage to materials associated with air pollution
Ziegahn, K.-F.
Conference Paper
1991Influence of grinding on near-surface regions of high-strength ceramics. Characterization by X-ray diffraction and effect on strength.
Pfeiffer, W.
Book Article
1991Mehrfachrisse in versteiften Hautfeldern
Schöpfel, A.
Conference Paper
1991Polymeralterung durch Luftschadstoffe
Krause, H.H.; Schmitt, D.; Ziegahn, K.-F.
Conference Paper
1990Influence of machining-induced residual stresses on the strength of ceramics
Pfeiffer, W.
Conference Paper
1990A method to predict residual strength and fatigue life of impact damaged carbon/epoxy laminates
Gerharz, J.J.; Idelberger, H.
Conference Paper
1989Critical levels for effects of air pollution on materials
Knotkova, D.; Ziegahn, K.-F.
Conference Paper
1989Origin and penetration depth of thermal degradation in InP
Sartorius, B.; Pfanner, K.
Journal Article