| | |
|---|
| 2012 | High speed cutting and high-performance cutting for improving resource and energy efficiency
Drossel, Welf-Guntram; Neugebauer, Reimund; Wertheim, Rafael | Conference Paper |
| 2012 | Influence of cutting technology on properties of Ni-Mn-Ga single crystalline actuator elements
Böhm, Andrea; Groß, Stefan; Schneider, Jörg; Drossel, Welf-Guntram; Pagounis, E.; Laufenberg, M. | Conference Paper |
| 2012 | Influencing the residual stresses in the surface layer by use of appropriate cutting parameters and tool geometries in turning of aluminium matrix composites
Schubert, Andreas; Nestler, A.; Mehner, T. | Journal Article |
| 2012 | Micro structured surfaces for thermodynamic applications
Schubert, Andreas; Edelmann, Jan; Zinecker, Mike; Hackert-Oschätzchen, Matthias; Zeidler, Henning | Poster |
| 2011 | Automatic construction of statistical shape models for vertebrae
Becker, Meike; Kirschner, Matthias; Fuhrmann, Simon; Wesarg, Stefan | Conference Paper |
| 2011 | Energy efficient process planning based on numerical simulations
Neugebauer, Reimund; Hochmuth, C.; Schmidt, G.; Dix, M. | Conference Paper |
| 2011 | Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017
Schubert, Andreas; Nestler, Andreas; Pinternagel, Stefan; Zeidler, Henning | Journal Article, Conference Paper |
| 2011 | Influences on occurrence of magnetism during cutting processes
Bähre, D.; Trapp, K.; Tschuncky, R. | Journal Article, Conference Paper |
| 2011 | Konsistente Parametrisierung von Flächen vom Geschlecht 1 zur Bildung eines statistischen Formmodells des Wirbels
Becker, Meike; Kirschner, Matthias; Wesarg, Stefan | Conference Paper |
| 2010 | Analysis of influences on occurrence of magnetism during cutting processes
Bähre, D.; Becker, D.; Tschuncky, R. | Conference Paper |
| 2010 | Approaches to enhance surface integrity in turning of aluminium matrix composites
Schubert, A.; Nestler, A. | Conference Paper |
| 2010 | Challenges for the metall cutting industryversus shortage of ressources
Neugebauer, Reimund; Wertheim, R.; Harzbecker, C.; Hochmuth, C.; Schubert, A.; Ihlenfeldt, S. | Conference Paper |
| 2010 | Einfluss von Werkzeugschneidengeometrie und Prozessparametern auf die Oberflächenfeingestalt beim Drehfräsen von Aluminiummatrix-Verbundwerkstoffen
Schubert, A.; Nestler, A.; Funke, R. | Journal Article, Conference Paper |
| 2010 | Elektromagnetische Felder ersetzen Schneidstempel
Kräusel, V.; Engelbrecht, L.; Schäfer, R. | Journal Article |
| 2010 | Ermittlung der Einsatzpotenziale und -grenzen des adiabatischen Trennens für Schneid- und Lochoperationen
: Neugebauer, Reimund (Mitarb.); Weigel, Patricia (Projektleiter); Westkämper, Engelbert (Mitarb.); Verl, Alexander (Mitarb.); Eicher, Frank (Projektleiter); Salomon, Rainer (Mitarb.) | Research Report |
| 2010 | Parametrisierung und Rekonstruktion einer Fläche vom Geschlecht 1 im Rahmen der Segmentierung mit statistischen Formmodellen
Becker, Meike
: Kirschner, Matthias (Betreuer) | Master Thesis |
| 2010 | Size effects in drilling burr formation
Neugebauer, Reimund; Schmidt, G.; Dix, M. | Conference Paper |
| 2009 | Schneiden mit elektromagnetischen Feldern
Kräusel, V.; Lieber, T. | Journal Article |
| 2008 | Hochgeschwindigkeitsscherschneiden hält Einzug in die Blechbearbeitung
Neugebauer, Reimund; Kräusel, V.; Weigel, P. | Journal Article |
| 2008 | Microtribological/mechanical testing in 0, 1 and 2 dimensions
Schiffmann, K.I. | Journal Article |
| 2007 | Laser beam application with high power fiber lasers
Beyer, E.; Brenner, B.; Morgenthal, L. | Conference Paper |
| 2007 | Modelling, simulations and experimental verification of size effects in burr formation
Dix, M.; Leopold, J.; Neugebauer, Reimund | Conference Paper |
| 2007 | New aspects of tool materials and coating in sheet metal cutting technologies
Neugebauer, Reimund; Bräunlich, H.; Kräusel, V.; Weigel, P. | Conference Paper |
| 2007 | Werkzeuge für die Hochgeschwindigkeitsbearbeitung
Leopold, J.; Schmidt, G. | Conference Paper |
| 2006 | Interaktives hybrides Rendering mit Schnittoperationen
Balwierz, M.
: Sakas, G. (Prüfer) | Bachelor Thesis |
| 2005 | Advanced cutting technology in process chains for high strength steels
Kräusel, V.; Neugebauer, Reimund; Bräunlich, H. | Conference Paper |
| 2005 | Simulation des thermischen Bauteilverhaltens bei der Trockenbearbeitung
Dürr, H.; Hoyer, K.; Hanke, M. | Journal Article |
| 2003 | Application of new diode laser tools for cutting and welding
Benter, C.; Seme, B.; Petring, D.; Poprawe, R. | Conference Paper |
| 2003 | Identification of dimension in phase space for cutting
Schulz, W.; Eppelt, U.; Heesen, H.; Kostrykin, V.; Michel, J.; Niessen, M. | Conference Paper |
| 2001 | Modeling, monitoring and control in high quality laser cutting
Poprawe, R. | Journal Article |
| 2000 | Manufacturing with novel high-power diode lasers
Schulz, W.; Poprawe, R. | Journal Article |
| 2000 | Online process control for laser beam materials processing
Kratsch, C.; Abels, P.; Kaierle, S.; Poprawe, R.; Schulz, W. | Conference Paper |
| 1999 | Laser-Konturschneiden von Elektroblechsegmenten
Morgenthal, L.; Pfeiffer, E.; Beyer, E. | Journal Article |
| 1998 | Specification of the CIP3 Print Production Format (Version 3.0)
Daun, S.; Lucas, G.; Schönhut, J. | Book |
| 1997 | Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K. | Conference Paper |
| 1997 | Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.; Straehler, B. | Conference Paper |
| 1997 | Prozeßüberwachung und -regelung beim Laserstrahl-Hochgeschwindigkeitsschneiden
Schneider, F.; Bingener, F.D.; Riehn, H.-D. | Journal Article |
| 1997 | Specification of the CIP3 Print Production Format (Version 2.1)
Daun, S.; Lucas, G.; Schönhut, J. | Technical Report |
| 1996 | Specification of the CIP3 Print Production Format (Version 2.0)
Daun, S.; Lucas, G.; Schönhut, J. | Technical Report |
| 1995 | CIP3. Print production format
Daun, S. | Technical Report |
| 1995 | CIP3. Print production format
Daun, S. | Technical Report |
| 1995 | Determination of stress, deformation and temperature in the marginal zone of machined workpieces by means of 3D-finite element analysis
Spur, G.; Gerloff, S. | Conference Paper |
| 1995 | Specification of the CIP3 Print Production Format
Daun, S.; Lucas, G.; Schönhut, J. | Technical Report |
| 1994 | Dehnungsanalyse zur Sensorentwicklung.
Spur, G.; Thiel, R. | Journal Article |
| 1994 | Messen von Kräften beim Beschneiden tiefgezogener Blechwerkstücke
Spur, G.; Pöllmann, A.; Thiel, R. | Journal Article |
| 1993 | Laser beam characterization and measurement techniques
Du, K.-M.; Maier, C.; Märten, O.; Scholl, M. | Conference Paper |
| 1991 | New devices for on-line process diagnostics during laser machining
Bayer, E.; Abels, P.; Drenker, A.; Maischner, D. | Conference Paper |
| 1991 | Recent developments in laser technology
Beyer, E.; Herziger, G. | Conference Paper |
| 1991 | Sensor-aided programming and movement. Adaptation for robot-guided deburring of castings
Hsieh, L.-H.; Seliger, G. | Journal Article |
| 1990 | Comparison of high power Nd-YAG and CO2-lasers in materials processing.
Alunovic, M.; Herziger, G.; Treusch, H.G. | Book Article |
| 1989 | Absorption distribution on idealized cutting front geometries and its significance for laser beam cutting
Petring, D.; Abels, P.; Beyer, E. | Conference Paper |
| 1989 | Cutting with the excimer laser, effects of pulse width and repetition rate on cutting edge quality of fibre-reinforced polymers and alumina ceramics.
Wehner, M.; Poprawe, R.; Trasser, F.-J. | Conference Paper |
| 1989 | On laser fusion cutting - the self-adjusting cutting kerf width
Schulz, W.; Becker, D. | Conference Paper |
| 1988 | CO2-lasers for industrial materials processing
Herziger, G. | Conference Paper |
| 1987 | On laser fusion cutting of metals
Schulz, W.; Simon, G.; Urbassek, H.M.; Decker, I. | Journal Article |