Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Active flow control in wind turbines - integration technologies and assessment of economic effects
Schüller, Martin; Lipowski, Mathias; Weigel, Perez; Symmank, Christina; Meynerts, Lilly; Walther, Marco; Dziuba, Franz; Otto, Thomas; Götze, Uwe; Kroll, Lothar
Conference Paper
2018Load reducing control for wind turbines
Shan, Martin
: Hoffmann, C.; Bottasso, C.L.
Dissertation
2018The methods for controlled thermal deformations in machine tools
Kuznetsov, Alexandr P.; Koriath, Hans-Joachim; Dorozhko, Alexey O.
Conference Paper
2017Comparison of control approaches for variable speed air source heat pumps considering time variable electricity prices and PV
Fischer, D.; Bernhardt, J.; Madani, H.; Wittwer, C.
Journal Article
2017Describing HVAC controls in IFC - method and application
Benndorf, G.; Réhault, N.; Clairembault, M.; Rist, T.
Journal Article, Conference Paper
2016Closed-loop control of product properties in metal forming
Allwood, J.M.; Duncan, S.R.; Cao, J.; Groche, Peter; Hirt, Gerhard; Kinsey, B.; Kuboki, T.; Liewald, Mathias; Sterzing, Andreas; Tekkaya, A. Erman
Journal Article, Conference Paper
2016Force control of cable-driven parallel robots
Kraus, Werner
: Pott, Andreas (Hauptberichter); Eberhard, Peter (Mitberichter)
Dissertation
2016Photoakustischer Low-Cost CO2-Sensor für Automobilanwendungen
Huber, Jochen; Enriquez, Juan Antonio; Escobar, Antonio; Kolb, Stefan; Dehé, Alfons; Jost, Franz; Wöllenstein, Jürgen
Conference Paper
2016Wind turbine loads reduction using feedforward feedback collective pitch control based on the estimated effective wind speed
Meng, Fanzhong; Wenske, Jan; Gambier, Adrian
Conference Paper
2015New concepts for distributed actuators and their control
Drossel, Welf-Guntram; Schlegel, Holger; Walther, Michael; Zimmermann, Philipp; Bucht, Andre
Book Article
2015Performance improvement of a point absorber wave energy converter by application of an observer-based control: Results from wave tank testing
Kracht, Peter; Perez-Becker, Sebastian; Richard, Jean-Baptiste; Fischer, Boris
Journal Article
2014Adaptronic form honing - Manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Conference Paper
2014Analysis process for different polymere electrolyte fuel cell stacks to derive a control strategy based on impedance data
Keller, S.; Popenheim, A.; Hempel, M.; Gläsker, K.; Manoli, Y.
Journal Article
2014Design of a multiagent-based voltage control system in peer-to-peer networks for smart grids
Rohbogner, G.; Fey, S.; Benoit, P.; Wittwer, C.; Christ, A.
Journal Article
2014Integrated solutions for noise and vibration control in vehicles
Mayer, Dirk; Millitzer, Jonathan; Bein, Thilo
Journal Article
2014Mechanically coupled high dynamic linear motors - a new design approach and its control strategy
Rehm, Matthias; Ihlenfeldt, Steffen; Schlegel, Holger; Drossel, Welf-Guntram
Journal Article, Conference Paper
2014Micro-cracks in silicon wafers and solar cells: Detection and rating of mechanical strength and electrical quality
Demant, M.; Oswald, M.; Welschehold, T.; Nold, S.; Bartsch, S.; Schoenfelder, S.; Rein, S.
Conference Paper
2014New concepts for distributed actuators and their control
Drossel, Welf-Guntram; Bucht, Andre
Conference Paper
2014Ein Performanceindex für den Drehzahlregler von Servoantrieben
Quellmalz, Johannes; Rehm, Matthias; Schlegel, Holger; Drossel, Welf-Guntram
Conference Paper
2014Remote control of distributed energy resources using IEC 61850 as application-layer protocol standard
Feuerhahn, S.; Kohrs, R.; Wittwer, C.
Journal Article
2014Struktur und Regelung mechanisch gekoppelter Vorschubantriebe
Rehm, Matthias; Quellmalz, Johannes; Schlegel, Holger; Drossel, Welf-Guntram
Conference Paper
2013Anti-reflection-coating thickness measurements on textured silicon surfaces: Evaluation and accuracy of different measurement techniques
Krieg, A.; Greulich, J.; Tondorf, M.; Rein, S.
Conference Paper
2013BonFIRE: The clouds and services testbed
Kavoussanakis, Konstantinos; Hume, Alastair; Martrat, Josep; Ragusa, Carmelo; Gienger, Michael; Campowsky, Konrad; Seghbroeck, Gregory; Vázquez, Constantino; Velayos, Celia; Gittler, Frédéric; Inglesant, Philip; Carella, Giuseppe; Engen, Vegard; Giertych, Michal; Landi, Giada; Margery, David
Conference Paper
2013Evaluation and improvement of a feature-based classification framework to rate the quality of multicrystalline silicon wafers
Demant, M.; Höffler, H.; Schwaderer, D.; Seidl, A.; Haunschild, J.; Rein, S.
Conference Paper
2013Multi-agent systems' asset for smart grid applications
Rohbogner, G.; Hahnel, U.J.J.; Benoit, P.; Fey, S.
Journal Article
2013A survey on control methods for the mitigation of tower loads
Fischer, Boris; Shan, Martin
Report
2012Adaptronic form honing - manufacturing methods for compensating cylinder bore distortions
Neugebauer, Reimund; Hochmuth, Carsten; Schneider, Rene
Presentation
2012Adaptronic tools for superfinishing of cylinder bores
Roscher, H.-J.; Hochmuth, C.; Hoffmann, M.; Praedicow, M.
Conference Paper
2012Design- and control-concept for compliant machine tools based on controller integrated models
Uhlmann, E.; Eßmann, J.; Wintering, J.-H.
Journal Article
2012Online-algorithm using adaptive filters for short-term wave prediction and its implementation
Fischer, B.; Kracht, P.; Perez-Becker, S.
Presentation
2011Foresighted control of active foot prostheses
Kleiner, Bernhard; Cesmeci, Denis; Schneider, Urs
Conference Paper
2010Addressing input saturation and kinematic constraints of overactuated undercarriages by predictive potential fields
Connette, Christian P.; Pott, Andreas; Hägele, Martin
Conference Paper
2010Control design and experimental validation of an adaptive spindle support for enhanced cutting processes
Neugebauer, Reimund; Drossel, W.-G.; Bucht, A.; Kranz, B.; Pagel, K.
Conference Paper, Journal Article
2010Development of a shape memory based drive and control concept for a hand prosthesis
Bucht, A.; Rotsch, C.; Pagel, K.; Jung, J.; Kunze, H.
Conference Paper
2010Fault tolerant sequential control
Neugebauer, Reimund; Barthel, S.; Richter, M.
Conference Paper
2010Numerical simulation of the activation behavior of thermal shape memory alloys
Neugebauer, Reimund; Bucht, A.; Pagel, K.; Jung, J.
Conference Paper
2009Demystifying self-awareness of autonomic systems
Smirnov, M.; Tiemann, J.; Chaparadza, R.; Rebahi, Y. et al.
Conference Paper
2009NDT based process monitoring and control
Wolter, B.; Dobmann, G.; Boller, C.
Conference Paper
2008Integrative Betrachtung bei der Gefahrstofflagerung
Müller, T.
Journal Article
2007Life cycle cost controlling in industrial manufacturing
Niemann, Jörg
Conference Paper
2005Smart structures and materials 2005 - Smart structures and integrated systems
Melz, T.; Matthias, M.
: Flatau, A.B.
Conference Proceedings
2003Evolved neurodynamics for robot control
Pasemann, F.; Hülse, M.; Zahedi, K.
Conference Paper
2002International Colloquium on Autonomous and Mobile Systems 2002. Proceedings
: Schmucker, U.
Conference Proceedings
2002Überwachung und Steuerung von Lackierprozessen - Flüssiglackbeschichtung - KTL
Baumgärtner, O.
Conference Paper
2001Minimum Forms of Control in Prokaryotes and their Computational Meaning
DiPrimio, F.; Kilian, A.E.
Conference Paper
2001System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G.
Report
2001System Dynamics as an Enabling Technology for Learning in Software Organisations
Pfahl, D.; Ruhe, G.
Conference Paper
2000IQ2000
Hägele, M.; Traub, A.
Book Article
2000Mechatronic System Techniques for Robots for Service Application Systems
Schraft, R.D.; Hägele, M.; Heni, M.; Seid, R.
Book Article
1999Das Informationstechnik-Konzept der Flexiblen Fab
Mönch, G.; Schmalfuß, V.; Frauenhoffer, F.; Sturm, R.; Aron, J.
Conference Paper
1999Die Organisation der Flexiblen Fab
Frauenhoffer, F.; Mönch, G.; Schmalfuß, V.; Silvi, T.; Sturm, R.; Podewils, M. von
Conference Paper
1999Single chip video converter for multimedia displays: The "HiCon" video chip
Hahn, M.; Huck, C.; Rummler, K.; Talmi, M.; Wolf, S.
Conference Paper
1999Stochastic resource prediction and admission for interactive sessions on multimedia servers
Friedrich, M.; Hollfelder, S.; Aberer, K.
Report
1998Armaturen optimal einsetzen. Diagnose von Druckstößen und Kavitationsschlägen in Rohrleitungssystemen
Dudlik, A.; Schlüter, S.
Journal Article
1998Druckstösse und Kavitationsschläge infolge schnell schliessender Armaturen
Dudlik, A.; Schlüter, S.
Journal Article
1998Implementation of a mass customization system for clock production
Tseng, M.M.; Geisel, T.; Fischer, D.
Conference Paper
1998Überwachung und Steuerung von Lackierprozessen - Flüssiglacke - Vorbehandlung, KTL, Ultrafiltration
Baumgärtner, O.
Conference Paper
1997Planning of multi-site production
Bullinger, H.-J.; Fähnrich, K.-P.; Laubscher, H.-P.
Journal Article
1997Prozeßüberwachung und -regelung beim Laserstrahl-Hochgeschwindigkeitsschneiden
Schneider, F.; Bingener, F.D.; Riehn, H.-D.
Journal Article
199614 bit Sigma Delta modulator with multi bit feedback
Mödl, S.; Hauer, H.; Mertens, A.; Eckardt, D.
Conference Paper
1996Leitfaden Erfolgskontrolle bei der Bodenreinigung
Kördel, W.; Müller-Wegener, U.; Neumaier, H.; Trenk, K.T.
Book
1996Model-based Planning and Control of Distributed Business Processes in Manufacturing Networks
Pirron, J.; Braun, J.; Gehr, F.
Conference Paper
1995Automatic synthesis of control programs by combination of learning and problem solving methods
Müller, W.; Wysotzki, F.
Conference Paper
1995Steuerungsintegration von Überwachungsverfahren
Spur, G.; Krüger, J.; Suwalski, I.
Journal Article
1994Closed-loop control in power operated thee-jaw chucks
Spur, G.; Stelzer, C.
Conference Paper
1994Fehlgerüche in der Papier- und Kartonindustrie
Lustenberger, M.; Ziegleder, G.; Betz, G.
Conference Paper
1994Parallel-FUCS. Einsatzsystem zur On-line- und Real-time-Fuzzy-Klassifikation
Franke, H.
Journal Article
1994Wavelength manager covering the EDFA-band and capable of controlling hundreds of transmitters
Kruger, U.; Kruger, K.; Batchellor, C.R.; Fischer, U.; Helmolt, C. von; Nagengast, U.
Conference Paper
1993Akzeleratorunterstützte Fuzzy-Klassifikation zur Echtzeit-Prozeßüberwachung
Priber, U.; Franke, H.; Ruhnau, G.; Müller, D.; Eichhorn, K.; Schlegel, P.
Conference Paper
1993The fractal company - the revolution in enterprise structuring
Warnecke, H.-J.; Hüser, M.; Kirchhoff, M.
Journal Article
1993MAX - modular assembly example
Schweizer, M.; Grau, R.
Conference Paper
1993Objektorientierte Prozeßleittechnik
Steusloff, H.
Conference Paper
1993Results of the concerted action on power conditioning and control
Jantsch, M.; Schmidt, H.; Schmid, J.
Conference Paper
1992Cybernetic control model from ethology for adaptive coordination of robot behaviors
Schlüter, B.
Conference Paper
1992DSC-Messung des Temperiergrades fließfähiger vorkristallisierter Schokolademassen unter Produktionsbedingungen
Schuster-Salas, C.; Ziegleder, G.
Journal Article
1992FMS-scheduling using branch-and-bound with heuristics
Herrmann, F.; Müller, K.; Engell, S.
Conference Paper
1992Instrumentation for measuring and monitoring cleanroom suitability of equipment
Kahlden, T. von
Conference Paper
1992MAX - modular assembly example
Grau, R.; Schweizer, M.; Schraft, R.D.
Conference Paper
1992MAX - modular assembly example
Grau, R.; Schweizer, M.; Schraft, R.D.
Conference Paper
1992Mögliche gegenläufige Auswirkungen durch Ausblendung erfahrungsgeleiteter Arbeit hinsichtlich Leistungsfähigkeit der Mitarbeiter und Steuerungsfähigkeit der Arbeitsvollzüge
Lay, G.; Schneider, R.
Book Article
1992Prozeßbeeinflussung beim Lichtbogenschweißen durch adaptive Steuerung von Schweißparametern.
Lübbert, U.
Journal Article
1991Automatisierungsstrategie für die flexible Montage
Warnecke, H.-J.; Schweizer, M.
Conference Paper
1991Design, programming and control of automation and robotics systems
Duelen, G.; Münch, H.
Conference Paper
1991Efficient modeling and simulation of logistic processes with an object-oriented system
Becker, B.-D.; Noyes, E.L.; Walderich, W.
Conference Paper
1991Entwicklung und Erprobung der Sensortechnik zur Erfassung von Klebstoffauftragsmengen bei der Papiersackherstellung. Tl.2. Mikrowellenabsorption
Korn, M.; Pfeiffer, T.
Journal Article
1991Factory of the future.
Warnecke, H.-J.
Book Article
1991An integrated software system for efficient production and material flow control
Meinberg, U.
Conference Paper
1991Nachbildung von Steuerungen mit Hilfe von Entscheidungstabellen
Becker, B.-D.
Conference Paper
1991Qualitätssicherung und Kostenreduzierung durch Steuerung und Überwachung automatisierter Spritz-Lackierprozesse
Svejda, P.
Conference Paper
1990Control and hardware for flexible assembly cells - structures of the future
Grau, R.; Schweizer, M.; Weisener, T.
Conference Paper
1990Lager-Steuerungssysteme - Effektiv planen und entwerfen
Stoffels, D.
Journal Article
1990Process monitoring and process control of laser beam welding
Gatzweiler, W.; Maischner, D.; Faber, F.J.; Juchem, S.; Beyer, E.
Conference Paper
1988Modelldesign und Software-Ergonomie in Simulationsverfahren der Fertigungstechnik
Becker, B.-D.
Conference Paper
1988On the application of a new method for fast and robust position control of industrial robots
Arber, C.; Hirsch, U.; Jacubasch, A.; Kuntze, H.-B.; Richalet, J.
Conference Paper
1985EDV-unterstützte Instandhaltung - EDV-Einsatz führt zur systematischen Arbeitsplanung und Auftragsbearbeitung
Greiner, T.
Journal Article