Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Effects of TiO2 doping on Li+-stabilized Na-β"-alumina for energy storage applications
Dirksen, Cornelius; Skadell, Karl; Schulz, Matthias; Stelter, Michael
Journal Article
2018Additive Manufacturing of ceramic heat exchanger. Opportunities and limits of the Lithography-based Ceramic Manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Moritz, Tassilo; Michaelis, Alexander
Journal Article
2017Ceramics with high electrical conductivity at room temperature
Martin, Hans-Peter; Feng, Bing; Michaelis, Alexander
Presentation
2017Crack detection of ceramics based on laser speckle photometry
Bendjus, Beatrice; Cikalova, Ulana; Chen, Lili
Journal Article
2017Different encapsulation strategies for implanted electronics
Winkler, Sebastian; Edelmann, Jan; Ruff, Roman; Welsch, Christine
Conference Paper
2017SiC-bonded diamond materials produced by pressureless silicon infiltration
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander
Journal Article
2016Direct laser interference patterning and ultrafast laser-induced micro/nano structuring of current collectors for lithium-ion batteries
Zheng, Y.; An, Z.; Smyrek, Peter; Seifert, H.J.; Kunze, Tim; Lang, Valentin; Lasagni, Andrés-Fabián; Pfleging, Wilhelm
Conference Paper
2016The effect of composition on the optical properties and hardness of transparent Al-rich MgO·nAl2O3 spinel ceramics
Wätzig, Katja; Krell, Andreas
Journal Article
2016Highly efficient and long-term stable micro fuel cell system based on ceramic multilayer technology
Goldberg, Adrian; Röntzsch, Lars; Pohlmann, Carsten; Freytag, Christian; Tagne Saha, Ariel Thierry; Ziesche, Steffen; Partsch, Uwe
Conference Paper
2016Micro-Reactors made by lithography-based ceramic manufacturing (LCM)
Scheithauer, Uwe; Schwarzer, Eric; Ganzer, Gregor; Körnig, André; Beckert, Wieland; Reichelt, Erik; Jahn, Matthias; Härtel, Anja; Richter, Hans-Jürgen; Moritz, Tassilo; Michaelis, Alexander
Conference Paper
2016Nondestructive cell evaluation techniques in SOFC stack manufacturing
Wunderlich, Christian
Conference Paper
2016On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics
Kailer, A.; Stephan, M.
Journal Article
2016Self-calibrating approach for terahertz thickness measurements of ceramic coatings
Krimi, Soufiene; Klier, Jens; Jonuscheit, Joachim; Freymann, Georg von; Urbansky, Ralph; Beigang, René
Conference Paper
2016Study of quantification methods in self-healing ceramics, polymers and concrete: A route towards standardization
Lucas, Sandra S.; Tapavicza, Max von; Schmidt, Annette M.; Bertling, Jürgen; Nellesen, Anke
Journal Article
2015High-performance ceramics for power, chemical, machine and plant engineering
Voigtsberger, Bärbel; Rossner, W.; Stelter, Michael; Topfer, J.; Eichler, J.; Voigt, Ingolf; Voss, H.
Journal Article
2015Peen forming of ceramics - A new chipless shaping technique
Pfeiffer, W.; Höpfel, H.
Conference Paper
2015ZERODUR®: New stress corrosion data improve strength fatigue prediction
Hartmann, P.; Kleer, G.; Rist, T.
Conference Paper
2014Comparison of thermo-mechanical characteristics of non-doped and 3 mol% B-site Zr-doped Ba0.5Sr0.5Co0.8Fe0.2O3-sigma
Pecanac, G.; Kiesel, L.; Kriegel, R.; Malzbender, J.
Journal Article
2014Manufacture and testing of thermoelectric modules consisting of BxC and TiOx elements
Feng, Bing; Martin, Hans-Peter; Börner, Floriana-Dana; Lippmann, Wolfgang; Schreier, Max; Vogel, Karin; Lenk, Andreas; Veremchuk, Igor; Dannowski, Marcel; Richter, Christin; Pfeiffer, Peter; Zikoridse, Gennadi; Lichte, Hannes; Grin, Juri; Hurtado, Antonio; Michaelis, Alexander
Journal Article
2014Order of influences on the ballistic resistance of armor ceramics and single crystals
Krell, Andreas; Strassburger, Elmar
Journal Article
2014Shaping of ceramics using residual stresses
Höpfel, H.; Pfeiffer, W.
Conference Paper
2014Steady-state creep of porous and an extended analysis on the creep of dense BSCFZ perovskite
Pećanac, Goran; Kiesel, Lutz; Malzbender, Jürgen
Journal Article
2013Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H.
Journal Article
2013Edge on Impact Simulations and Experiments
Leavy, R.; Clayton, J.; Strack, O.; Brannon, R.; Straßburger, E.
Conference Paper, Journal Article
2013Electrochemical corrosion of liquid phase sintered silicon carbide ceramics
Sydow, U.; Sempf, K.; Herrmann, M.; Schneider, M.; Kleebe, H.-J.; Michaelis, A.
Journal Article
2013Enhancing micro-EDM using ultrasonic vibration and approaches for machining of nonconducting ceramics
Schubert, Andreas; Zeidler, Henning; Hackert-Oschätzchen, Matthias; Schneider, Jörg; Hahn, Martin
Journal Article
2012Fabrication and evaluation of SixNy coatings for total joint replacements
Olofsson, J.; Pettersson, M.; Teuscher, N.; Heilmann, A.; Larsson, K.; Grandfield, K.; Persson, C.; Jacobson, S.; Engqvist, H.
Journal Article
2012Ultraviolet LED multi-chip module based on ceramic substrate
Burkhardt, Thomas; Hornaff, Marcel; Acker, Anne; Peschel, Thomas; Becker, Erik; Suphan, Karl-Heinz; Mensel, Karsten; Jirak, Stephan; Eberhardt, Ramona; Tünnermann, Andreas
Conference Paper
2011Ultrasonic assistance and nonconductive materials: Shifting the boundaries of micro-EDM
Schubert, Andreas; Zeidler, Henning; Hackert-Oschätzchen, Matthias; Schneider, Jörg
Conference Paper
2009Actuators to be integrated in low temperature cofired ceramics (LTCC) microfluidic systems
Klumbies, H.; Partsch, U.; Goldberg, A.; Gebhardt, S.; Keitel, U.; Neubert, H.
Conference Paper
2009Intelligent materials
Hanselka, Holger; Nuffer, J.
Book Article
2009Werkstofftrends: Werkstoffe der Mikrosystemtechnik
Weimert, B.; Reschke, S.; Kohlhoff, J.; Grüne, M.
Journal Article
2008A new oxidation protection strategy for silicon carbide foams
Martin, H.-P.; Standke, G.; Adler, J.
Journal Article
2008Valve metal, Si and ceramic oxides as dielectric films for passive and active electronic devices
Michaelis, A.
Book Article
2007Corrosion of Si3N4-ceramics in aqueous solutions. Part 2: Corrosion mechanisms in acids as a function of concentration, temperature and composition
Schilm, J.; Herrmann, M.; Michael, G.
Journal Article
2006Corrosion of selected ceramic materials in hot gas environment
Fritsch, M.; Klemm, H.; Herrmann, M.; Schenk, B.
Journal Article
2006Corrosion of Si3N4-ceramics in aqueous solutions Part I: Characterisation of starting materials and corrosion in 1 NH2SO4
Schilm, J.; Gruner, W.; Herrmann, M.; Michael, G.
Journal Article
2006Freeze casting of ceramic components using ice cores and ice moulds
Moritz, T.; Richter, H.-J.
Conference Paper
2002Heißgießen von Keramik
Lenk, R.
Book Article
2002Modelling of chemical processes in the dynamic expansion for pulsed laser deposition
Kreutz, E.W.; Aden, M.; Niessen, M.; Husmann, A.; Poprawe, R.
Conference Paper
2001Fatigue Design, Testing and Relability of Ceramic Components by the Example of Intake and Exhaust Valves
Sonsino, C.M.
Conference Paper
2001Gesicherte Interpretationen der FTIR-Reflexionsspektren SiC-CVD-Schichten durch Spektrensimulation
Grählert, W.; Hopfe, V.
Journal Article
2001Laser-assisted turning of components made of silicon-nitride ceramics
Klocke, F.; Bausch, S.
Conference Paper
2001Referenzproben für Härteprüfung an Hochleistungskeramiken
Reich, T.; Ullner, C.; Polzin, T.
Journal Article
1999Auftragsschweissen mit dem Hochleistungs-Diodenlaser
Richter, A.; Nowotny, S.; Naumann, T.; Beyer, E.
Journal Article
1999Debinding and sintering of ceramics. Optimisation through thermoanalytical simulation
Leitner, G.; Jaenicke-Rößler, K.; Gestrich, T.; Breuning, T.
Journal Article
1999Fatigue design using ceramics
Sonsino, C.M.
Conference Paper
1999Green machining of advanced ceramics
Klocke, F.; Gerent, O.; Schippers, C.
Book Article
1999High-accuracy micromachining of ceramics by frequency-tripled Nd:YAG-lasers
Hellrung, D.; Yeh, L.-Y.; Depiereux, F.; Gillner, A.; Poprawe, R.
Conference Paper
1999Keramik- und Stahlventile des PKW-Motorenbaus im Vergleich
Brandt, U.; Reinheimer, G.; Mörgenthaler, K.
Conference Paper
1999Optical modelling vs. FTIR reflectance microscopy. Characterization of laser treated ceramic fibres
Grählert, W.; Leupolt, B.; Hopfe, V.
Journal Article
1999Theoretische und experimentelle Untersuchungen für eine Bemessung und serienreife Entwicklung von Ein- und Auslassventilen aus Siliziumnitrid
Sonsino, C.M.; Brandt, U.; Stoerzel, K.
Conference Paper
1998High pressure (explosive) consolidation of n-Al2O3-ceramics
Prümmer, R.; Weimar, P.; Knitter, R.
Conference Paper
1998New ceramic materials derived from biogenic raw materials
Kleber, S.
Conference Paper
1998A new look at the influences of load, grain size, and grain boundaries on the room temperature hardness of ceramics
Krell, A.
Journal Article
1998Pulsed laser deposition of ceramics
Kreutz, E.W.
Journal Article
1997Bemessung von Keramikventilen für eine Serienfertigung
Sonsino, C.M.; Brandt, U.; Störzel, K.
Conference Paper
1997Continuous coating of ceramic fibres by industrial-scale laser driven CVD. Process characterization
Hopfe, V.; Dresler, B.; Schönfeld, K.; Jäckel, R.; Throl, O.
Conference Paper
1997Laser surface cladding of aluminium with oxide ceramics
Nowotny, S.; Müller, A.; Techel, A.; Franz, U.
Conference Paper
1997Processing and properties of AIN matrix composite ceramics containing dispersed hard materials
Burkardt, S.; Riedel, R.; Müller, G.
Journal Article
1997Tribological properties of silicon nitride ceramics modified by titanium and subsequent oxygen implantation
Brenscheidt, F.; Mändl, S.; Günzel, R.; Wieser, E.; Möller, W.; Fischer, W.; Herrmann, M.
Journal Article
1996Fluxless flip chip bonding on flexible substrates
Zakel, E.; Aschenbrenner, R.; Azdasht, G.; Klöser, J.; Reichl, H.
Journal Article
1996Laser induced thermal shock characterization of high-temperature ceramics
Kirchhoff, G.; Weiss, H.-J.; Bahr, H.-A.; Pflugbeil, I.; Langmeier, P.
Conference Paper
19953D-Finite-Elemente-Analyse zur Lokalisierung des Bruchursprungs in Spaltzugversuch
Schäfer, R.; Soltesz, U.; Bernauer, G.
Book
1995Applicability of the diametral compression test for strength measurements of ceramics
Bernauer, G.; Soltesz, U.; Schäfer, R.
Conference Paper
1995Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H.
Conference Paper
1995Si-N-C-Verbundwerkstoffe unter Verwendung von Recyclingprodukten
Boden, G.; Hermel, W.; Michael, G.
Conference Paper
1995Thermoschockprüfung mittels Leistungslaser
Kirchhoff, G.
Conference Paper
1995Ultrafeine Pulver - Herstellung, Verarbeitung und Anwendungen
Günther, B.; König, T.; Meisel, R.L.
Conference Paper
1994Anwendungsmöglichkeiten und Grenzen thermodynamischer Berechnungen zur Interpretation und Voraussage von Korrosionsprozessen
Richter, H.J.; Kaiser, A.; Traut, C.; Herrmann, M.
Conference Paper
1994Hypervelocity Penetration of Tungsten Sinter-Alloy Rods into Alumina
Hohler, V.; Stilp, A.J.; Weber, K.
Conference Paper
1991Materialforschung und Werkstofftechnik auf dem Wege vom Konstruktions- zum Funktionswerkstoff
Kunze, H.-D.
Conference Paper
1991Röntgen-Computer-Tomographie in der Werkstoffprüfung
Maisl, M.
Conference Paper