| | |
|---|
| 2013 | Micro-EDM milling of electrically nonconducting zirconia ceramics
Schubert, Andreas; Zeidler, Henning; Hahn, M.; Hackert-Oschätzchen, Matthias; Schneider, Jörg | Conference Paper, Journal Article |
| 2012 | Die-attach technologies for ultraviolet LED multi-chip module based on ceramic substrate
Burkhardt, Thomas; Hornaff, Marcel; Acker, Anne; Peschel, Thomas; Beckert, Erik; Suphan, Karl-Heinz; Mesel, Karsten; Jirak, Stephan; Eberhardt, Ramona; Tünnermann, Andreas | Journal Article |
| 2012 | Material- und Energieeffizienz in der Porzellanindustrie - Grundlage für die Wettbewerbsfähigkeit der Branche
Rösler, G.; Rösler, J.; Schirmer, P.; Häusler, A.; Fischer, G. | Journal Article |
| 2012 | Selective laser sintering as additive manufacturing method for producing ceramic components
Ahlhelm, Matthias; Richter, Hans-Jürgen | Presentation |
| 2011 | Micro electro discharge machining of electrically nonconductive ceramics
Schubert, A.; Zeidler, H.; Wolf, N.; Hackert, M. | Conference Paper |
| 2010 | Implementation of micro-EDM for machining of nonconductive ceramics
Schubert, A.; Zeidler, H. | Conference Paper |
| 2010 | Nano-processing for larger fine-grained windows of transparent spinel
Krell, A.; Hutzler, T.; Klimke, J.; Potthoff, A. | Conference Paper, Journal Article |
| 2010 | Piezoresistive effect in SiOC ceramics for integrated pressure sensors
Riedel, R.; Toma, L.; Janssen, E.; Nuffer, J.; Melz, T.; Hanselka, H. | Journal Article |
| 2010 | Shot peening of brittle materials - status and outlook
Pfeiffer, W.; Wenzel, J. | Conference Paper |
| 2010 | The water vapour hot gas corrosion of ceramic materials
Fritsch, M.; Klemm, H.; Herrmann, M.; Michaelis, A.; Schenk, B. | Journal Article |
| 2009 | The behavior of silicon nitride tools in hot rolling copper wire
Khader, I.; Fünfschilling, S.; Kailer, A.; Oberacker, R. | Conference Paper |
| 2009 | Grain growth anomaly in strontium titanate
Bräuer, M.; Weygand, D.; Gumbsch, P.; Hoffmann, M.J. | Journal Article |
| 2009 | Machining of nonconductive ZrO2 ceramics with micro-EDM
Schubert, A.; Zeidler, H. | Conference Paper |
| 2009 | Multi component powder injection moulding of metal-ceramic-composites
Baumann, A.; Moritz, T.; Lenk, R. | Conference Paper |
| 2009 | Silicon nitride wire-rolling tools: A failure-mode analysis and correlation with rolling-contact fatigue
Khader, I.; Kailer, A. | Conference Paper |
| 2009 | Testing the feasibility of new ceramic cutting tools - a case study on experimental and numerical evaluation of geometry and machining techniques
Renz, A.; Kailer, A.; Koplin, C. | Conference Paper |
| 2008 | "Snow flake" structures in silicon nitride ceramics - Reasons for large scale optical inhomogeneities
Herrmann, M.; Schulz, I.; Bales, A.; Sempf, K.; Hoehn, S. | Journal Article |
| 2008 | 3D characterisation and modelling of foam structures
Redenbach, C.; Sych, T.; Schladitz, K.; Godehardt, M.; Wirjadi, O.; Spies, M. | Poster |
| 2008 | Bearbeitung von Keramik durch Mikro-EDM
Altenburger, H. | Thesis |
| 2008 | Ceramic rolling tools for enhanced lifetime and product quality
Kailer, A.; Mauk, P.-J.; Eckardt, C.; Berroth, K.; Kozlowski, J.; Wageman, A. | Conference Paper |
| 2008 | Materials for transparent ceramics: Physical issues and technological solutions
Krell, A.; Klimke, J.; Hutzler, T. | Conference Paper |
| 2007 | Ab initio study of electronic densities of states at copper-alumina interfaces
Hashibon, A.; Elsässer, C.; Rühle, M. | Journal Article |
| 2007 | The AC conductivity of liquid-phase-sintered silicon carbide
Sauti, G.; Can, A.; McLachlan, D.S.; Herrmann, M. | Journal Article |
| 2007 | Damage mechanisms of silicon nitride rolls in hot rolling of copper wire
Khader, I.; Gumbsch, P.; Kailer, A. | Conference Paper |
| 2007 | Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments
Andrews, A.; Herrmann, M.; Sephton, M.; Machio, C.; Michaelis, A. | Journal Article |
| 2007 | Keramische Walzensysteme aus Siliciumnitrid
Khader, I.; Gumbsch, P.; Kailer, A. | Conference Paper |
| 2007 | Tribological behaviour of sub-micron cutting-ceramics in contact with wood-based materials
Beer, P.; Gogolewski, P.; Klimke, J.; Krell, A. | Journal Article |
| 2007 | Werkstofftrends: Biowerkstoffe
Reschke, S.; Kohlhoff, J.; Grüne, M.; Notthoff, C. | Journal Article |
| 2006 | Advanced ceramic oxides for electronics
Michaelis, A. | Habilitation |
| 2006 | Densification of liquid phase sintered silicon carbide
Can, A.; Herrmann, M.; McLachlan, D.S.; Sigalas, I.; Adler, J. | Journal Article |
| 2006 | The influence of porosity on the electrical properties of liquid-phase sintered silicon carbide
Ihle, J.; Martin, H.-P.; Herrmann, M.; Obenaus, P.; Adler, J.; Hermel, W.; Michaelis, A. | Journal Article |
| 2006 | Investigation of ceramics and ferroelectric materials by atomic force acoustic microscopy
Arnold, W. | Conference Paper |
| 2006 | Strengthening of silicon nitride ceramics by shot peening
Pfeiffer, W.; Gumbsch, P. | Journal Article |
| 2005 | Advances in shot peening of silicon nitride ceramics
Pfeiffer, W.; Frey, T. | Conference Paper |
| 2005 | Ceramic diesel particulate filters
Adler, J. | Journal Article |
| 2005 | Ceramic rolls for wires
Kailer, A.; Hollstein, T. | Conference Paper |
| 2005 | Modular micro reaction system including ceramic components
Moritz, T.; Lenk, R.; Adler, J.; Zins, M. | Journal Article |
| 2005 | Preventing contact loading induced surface failure of ceramic components by a shot peening treatment
Pfeiffer, W.; Frey, T. | Conference Paper |
| 2005 | Structure at abrupt copper-alumina interfaces: An ab-initio study
Hashibon, A.; Elsässer, C.; Rühle, M. | Journal Article |
| 2004 | Comments on "Spark Plasma Sintering of Ceramics"
Krell, A.; Bruggen, M.P.B. van | Journal Article |
| 2004 | Corrosion behaviour of different technical ceramics in acids, basic solutions and under hydrothermal conditions
Herrmann, M.; Schilm, J.; Michael, G. | Conference Paper |
| 2004 | Einsatz keramischer Schneidstoffe in der Stanztechnik
Schober, R.; Loibl, D. | Journal Article |
| 2004 | Increasing the static, cyclic and rolling load capacity of silicon nitride by shot peening
Frey, T.; Pfeiffer, W. | Conference Paper |
| 2004 | Strengthening of ceramics by shot peening
Pfeiffer, W.; Frey, T. | Conference Paper, Journal Article |
| 2004 | Werkstofftrends: Hochleistungskeramiken
Kohlhoff, J.; Reschke, S.; Kretschmer, T.; Notthoff, C. | Journal Article |
| 2004 | Werkstofftrends: Hochtemperaturfeste Werkstoffe
Kohlhoff, J.; Reschke, S.; Kretschmer, T.; Notthoff, C. | Journal Article |
| 2003 | Direct laser sintering of ceramic materials
Klocke, F.; Ader, C. | Conference Paper |
| 2003 | Direct laser sintering of ceramics
Klocke, F.; Ader, C. | Conference Paper |
| 2003 | Shot peening of ceramics: Damage or benefit?
Frey, T.; Pfeiffer, W. | Conference Paper |
| 2003 | Tribologisches Verhalten von keramischen Gleitringdichtungen
Kailer, A.; Hollstein, T.; Nosowicz, J.; Schiebel, H.; Merchke, F.; Schwetz, K.A.; Lesniak, C. | Journal Article |
| 2002 | Flexural vibration behavior of piezoelectric heterogeneous bimorph beams
Hirsekorn, S. | Journal Article |
| 2002 | Shot peening of ceramics: Damage or benefit?
Pfeiffer, W.; Frey, T. | Journal Article |
| 2002 | Strengthening of ceramics by shot peening
Pfeiffer, W.; Frey, T. | Conference Paper, Journal Article |
| 2001 | Laser-assisted turning of silicon-nitride ceramics
Klocke, F.; Bausch, S.; Bergs, T. | Journal Article, Conference Paper |
| 2001 | Machining components made of advanced ceramics: Prospects and trends
Bausch, S.; Schmidt, C.; Sinnhoff, V: | Journal Article |
| 2000 | Direct manufacturing of ceramic investment casting shells using SLS
Klocke, F.; Freyer, C. | Journal Article |
| 2000 | Investment casting shells in 1 day using Selective Laser Sintering (SLS)
Klocke, F.; Wirtz, H.; Freyer, C. | Journal Article |
| 2000 | Selective Laser Sintering of Zirconium Silicate Shells for Investment Casting
Klocke, F.; Wirtz, H.; Freyer, C. | Journal Article |
| 1999 | Direct manufacturing of ceramic investment casting shells using selective laser sintering
Klocke, F.; Freyer, C. | Journal Article |
| 1999 | Direct manufacturing of investment shells
Klocke, F.; Wirtz, H.; Freyer, C. | Journal Article |
| 1999 | Direct production of investment casting shells using SLS
Klocke, F.; Freyer, C. | Conference Paper |
| 1999 | Investment casting shells in 1 day using Selective Laser Sintering (SLS)
Klocke, F.; Wirtz, H.; Freyer, C. | Conference Paper |
| 1999 | Modeling of Graded 1-3 Composite Piezoelectric Transducers
Hirsekorn, S.; Gebhardt, E.; Arnold, W. | Conference Paper |
| 1997 | Druckgießen tonmineralfreier Suspensionen am Beispiel von Siliciumnitrid
Richter, H.-J. | Journal Article |
| 1997 | High-Frequency Ultrasound Detection of Samll Defects in Si3N4 Ceramic
Hennicke, J.; Netzelmann, U.; Shi, Y. | Journal Article |
| 1997 | Large area pulsed laser deposition of ceramic films
Kreutz, E.W.; Backes, G.; Mertin, M. | Journal Article |
| 1997 | Laser induced creep and fracture in ceramics
Pompe, W.; Bahr, H.-A.; Pflugbeil, I.; Kirchhoff, G.; Langmeier, P.; Weiss, H.-J. | Journal Article |
| 1997 | Surface modification and processing of silicon nitride
Breuning, U.; Richter, H.-J. | Conference Paper |
| 1997 | Zerstörungsfreie Prüfung zur Qualitätssicherung keramischer Bauteile
Reiter, H. | Book Article |
| 1996 | Laserultraschall-Materialcharakterisierung im Höchsttemperaturbereich
Paul, M.; Haberer, B.; Hoffmann, A. | Conference Paper |
| 1996 | Zerstörungsfreie Materialcharakterisierung als Beitrag zur Werkstoff- und Verfahrensentwicklung von Konstruktionskeramik
Netzelmann, U.; Kröning, M. | Conference Paper |
| 1996 | Zerstörungsfreie Prüfung zur Qualitätssicherung keramischer Bauteile
Reiter, H. | Conference Paper |
| 1995 | Characterization of thermal shock and thermal fatigue behaviour of ceramics by means of laser irradiation
Kirchhoff, G.; Weiß, H.-J.; Holzherr, M.; Bahr, H.-A.; Pflugbeil, I.; Pompe, W. | Conference Paper |
| 1995 | A comparative study of ORMOCER and PARALOID B72 for conservation of outdoor glazed ceramics
Pilz, M.; McCarthy, B. | Conference Paper |
| 1995 | Heißgießen von drucklos gesintertem Siliziumcarbid. Herstellung der Heißgießschlicker
Lenk, R.; Kriwoschepow, A.F.; Grosse, K. | Journal Article |
| 1995 | Heißgießen von Keramik
Lenk, R. | Book Article |
| 1995 | Honbearbeitung kermischer Werkstoffe
Spur, G.; Weigmann, U.-P. | Conference Paper |
| 1995 | Hot moulding - an interesting forming process
Lenk, R. | Journal Article |
| 1995 | Hot moulding of ceramics
Lenk, R. | Conference Paper |
| 1995 | Influence of forming technique on the SiC-platelet orientation in a liquid phase sintered SiC-matrix
Lenk, R.; Adler, J. | Conference Paper |
| 1995 | Laser radiation. A tool for generation of defined thin film properties for application
Kreutz, E.W.; Alunovic, M.; Klotzbücher, T.; Mertin, M.; Wesner, D.A.; Pfleging, W. | Journal Article |
| 1995 | Laser-based thermal shock testing of ceramics - from material characterization to component qualification
Bast, U.; Steiner, D.; Höpken, J.; Balke, H.; Kirchhoff, G. | Conference Paper |
| 1995 | Powderless processing of ceramic fibers
Glaubitt, W.; Jahn, R.; Essl, F.; Winter, V.; Sporn, D. | Conference Paper |
| 1995 | Ranking Methods of Ceramics and Experimental Optimization of a Laminated Target with Ceramics
Hohler, V.; Stilp, A.J.; Weber, K. | Conference Paper |
| 1995 | SiC-platelet orientation in a liquid phase sintered silicon carbide composite formed by thermoplastic forming techniques
Lenk, R.; Adler, J. | Conference Paper |
| 1995 | Thermal shock behavior of boron nitride/boron carbide composite ceramics
Pompe, W.; Bahr, H.-A.; Kirchhoff, G.; Holzherr, M.; Ruh, R.; Zangvil, A. | Conference Paper |
| 1995 | Ultraschall- und Durchstrahlungsprüfung keramischer Bauteile
Maisl, M.; Buck, J.; Müller, W.; Netzelmann, U. | Conference Paper |
| 1994 | Bearbeitung und Charakterisierung von Bauteilen aus Hochleistungskeramik
Reiter, H.; Netzelmann, U.; Wagemann, A.; Verlemann, E.; Hollstein, T.; Pfeiffer, W. | Conference Paper |
| 1994 | Charakterisierung von bearbeiteten Keramikoberflächen mittels akustischer Rastermikroskopie.
Pangraz, S.; Arnold, W.; Weides, G. | Conference Paper |
| 1994 | Fatigue design criteria for ceramic components under cyclic loading
Buxbaum, O.; Sonsino, C.M.; Esper, F.J. | Journal Article |
| 1994 | Flüssigphasengesintertes Siliciumcarbid und Siliciumcarbi-Composite
Adler, J.; Lenk, R.; Teichgräber, M. | Conference Paper |
| 1994 | Fracture mechanical characterization of thermal damage of ceramics by means of laser irradiation
Kirchhoff, G.; Holzherr, M.; Pflugbeil, I.; Weiss, H.-J.; Bahr, H.-A. | Conference Paper |
| 1994 | Liquid phase sintered silicon carbide composites
Adler, J.; Lenk, R.; Teichgräber, M. | Conference Paper |
| 1994 | Materials characterization and nondestructive testing by acoustic imaging techniques
Hirsekorn, S.; Weides, G.; Pangraz, S.; Arnold, W.; Bernauer, W. | Journal Article |
| 1994 | Materials Characterization with the Acoustic Microscopy
Hirsekorn, S.; Pangraz, S. | Journal Article |
| 1994 | Prototyping in der Ingenieurkeramik - Randbedingungen und Realisierung
Schubert, C.; Richter, C. | Conference Paper |
| 1994 | Siliciumnitridwerkstoffe. Abschnitt 4.2.4.1
| Book Article |
| 1994 | Stand und Entwicklungstendenzen bei keramischen Hochleistungswerkstoffen -Strukturkeramik-
Hermel, W.; Schubert, C. | Conference Paper |
| 1993 | Defect sizing in ceramic materials by high-frequency ultrasound techniques
Netzelmann, U.; Stolz, H.; Arnold, W.; Giunta, G. | Conference Paper |
| 1993 | Determination of the dynamic material properties of shock-loaded silicon-nitride
Nahme, H.; Hohler, V.; Stilp, A.J. | Conference Paper |
| 1993 | Dielectric properties of load perovskites as a function of processing and precursors
Reichert, K.; Schlenkrich, F. | Conference Paper |
| 1993 | Einfluß von Instoechiometrien auf die dielektrischen Eigenschaften von Blei-Barium-Magnesium-Niobat-Keramiken
Seffner, L.; Schlenkrich, F. | Conference Paper |
| 1993 | Einflußgrößen für die schwingfeste Bemessung von keramischen Bauteilen aus Al2O3 und Si3N4 im Temperaturbereich zwischen 20 und 1200 Grad Celsius
Sonsino, C.M.; Meyer, S.; Lindemann, G. | Conference Paper |
| 1993 | Fatigue design criteria for ceramic components under cyclic loading
Buxbaum, O.; Sonsino, C.M. | Conference Paper |
| 1993 | Fraunhofer-Institut für Betriebsfestigkeit. Tätigkeitsbericht 1992
| Annual Report |
| 1993 | Hot moulding of sintered silicon carbide
Lenk, R.; Kriwoschepow, A.F. | Conference Paper |
| 1993 | Materials characterization at high temperatures using laser ultrasound
Paul, M.; Arnold, W.; Haberer, B. | Journal Article |
| 1993 | Methoden zur Optimierung von Festigkeit und Lebensdauer thermisch gespritzter Werkstoffverbunde
Pantucek, P. | Conference Paper |
| 1993 | Das Plastifizierverhalten von Aluminiumnitrid bei der Herstellung von Spritzgießmassen
Lenk, R. | Conference Paper |
| 1993 | Rheological properties of silicon carbide hot-moulding slips
Lenk, R. | Conference Paper |
| 1993 | A theoretical study of grain growth in porous solids during sintering
Riedel, H.; Svoboda, J. | Journal Article |
| 1993 | Thermal shock fracture by laser irradiation.
Kirchhoff, G. | Book Article |
| 1993 | Thermoplastische Bindemittel für das Heißgießen von Keramik
Reinhard, L.; Neubauer, R.; Thamm, A. | Conference Proceedings |
| 1993 | Time-resolved diagnosis of processes in PLD of ceramics
Voss, A.; Kreutz, E.W.; Funken, J.; Alunovic, M.; Sung, H. | Journal Article |
| 1993 | Untersuchungen zum Einfluß der Ausgangssubstanzen und Syntheseverfahren auf die dielektrischen Eigenschaften komplexer Bleiperowskite
Schlenkrich, F.; Reichert, K. | Conference Paper |
| 1993 | Untersuchungen zum Einfluß technologischer Parameter auf die dielektrischen Eigenschaften komplexer Bleiperowskite
Schlenkrich, F.; Reichert, K. | Conference Paper |
| 1993 | Zur Anwendbarkeit des Spaltzugversuchs für die Ermittlung von Zugfestigkeiten
Bernauer, G.; Soltesz, U.; Kienzler, R.; Schäfer, R. | Book Article |
| 1992 | Deposition of ceramics by LPVD
Funken, J.; Kreutz, E.W.; Krösche, M.; Sung, H.; Voss, A.; Erkens, G.; Lemmer, O.; Leyendecker, T. | Journal Article |
| 1992 | Erhöhung der Bruchzähigkeit durch Plättchen ohne Bindung und Reibung
Weiß, H.-J. | Book Article |
| 1992 | Heißgießen von SiC
Lenk, R. | Journal Article |
| 1992 | Laser-assisted physical vapour deposition of ceramics
Funken, J.; Kreutz, E.W.; Krösche, M.; Sung, H.; Voss, A.; Erkens, G.; Lemmer, O.; Leyendecker, T. | Conference Paper |
| 1992 | Non-frictional jamming of inclusions - an ignored toughening effect
Weiß, H.-J. | Journal Article |
| 1992 | Preparation and processing of metal-ceramic composite materials
Petrullat, J.; Ray, S.; Guldner, G.; Breitscheidel, B.; Egger, C.; Schubert, U. | Journal Article |
| 1992 | Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z. | Conference Paper |
| 1992 | Sinterwerkstoffe - Einfluß von Versatz- und Formgebungsparametern auf die Eigenschaften von spritzgegossenem SSiC
Lenk, R.; Däberitz, K.; Adler, J. | Conference Paper |
| 1992 | Umfassende rheologische Charakterisierung von keramischen Spritzgießmassen
Lenk, R. | Conference Paper |
| 1992 | The use of carbon black in silicon carbide hot moulding formulations
Lenk, R. | Conference Paper |
| 1991 | Durch Druckspannungen hervorgerufene makro- und mikro-mechanische Phänomene in planar beaufschlagtem TiB2
Stilp, A.J.; Winkler, W.-D. | Conference Proceedings |
| 1991 | Festigkeit und Zuverlässigkeit technischer Keramiken unter mehrachsigen Belastungen
Stiebler, K.; Staskewitsch, E.; Arone, R.; Fridmann, G.; Oshrat, Y. | Conference Paper |
| 1991 | First evidence of the preformation of an inorganic network in sol-gel processing of lead zirconate titanate, obtained by EXAFS spectroscopy
Ahlfänger, R.; Bertagnolli, H.; Ertel, T.; Kolb, U.; Peter, D.; Naß, R.; Schmidt, H. | Journal Article |
| 1991 | Influence of grinding on near-surface regions of high-strength ceramics. Characterization by X-ray diffraction and effect on strength.
Pfeiffer, W. | Book Article |
| 1991 | NDE of structural ceramics and the need for standardization
Reiter, H. | Conference Paper |
| 1991 | ORMOCERs - new perspectives in the field of hard coatings for automotive glazing
Schottner, G.; Amberg-Schwab, S. | Conference Proceedings |
| 1991 | Röntgen-Computer-Tomographie in der Werkstoffprüfung
Maisl, M. | Conference Paper |
| 1991 | Schwingfestigkeit der keramikverstärkten Kolbengußlegierung GP-AlSi 12 CuMgNi bei erhöhten Temperaturen
Backer, E.; Sonsino, C.M. | Journal Article |
| 1991 | Sonderprüfverfahren zur Charakterisierung technischer Keramiken
Staskewitsch, E.; Stiebler, K. | Book Article |
| 1991 | Spallationsverhalten von planar beaufschlagtem TiB2, SiC und B4C
Stilp, A.J.; Winkler, W.-D. | Conference Proceedings |
| 1991 | Verfahren zur Prüfung technischer Keramiken unter zweiachsiger Belastung
Burblies, A.; Staskewitsch, E.; Stiebler, K. | Book Article |
| 1990 | Cadmium - Anwendung, Recycling und Ersatzprodukte
Tötsch, W. | Journal Article |
| 1990 | Entwicklung von Prooftest-Konzepten für Hüftgelenks-Kugelköpfe aus Keramik
Schäfer, R.; Siegele, D.; Soltesz, U. | Book |
| 1990 | High resolution X-ray and ultrasonic methods for the non-destructive evaluation of modern ceramics
Arnold, W.; Maisl, M.; Pangraz, S.; Reiter, H. | Conference Paper |
| 1990 | Influence of machining-induced residual stresses on the strength of ceramics
Pfeiffer, W. | Conference Paper |
| 1990 | Non-destructive evaluation of engineering ceramics by high-frequency acoustic techniques
Arnold, W.; Herzer, R.; Pangraz, S.; Simon, H. | Conference Paper |
| 1990 | Nondestructive evaluation of ceramics by x-ray computed tomography
Maisl, M.; Reiter, H.; Scherer, T. | Conference Paper |
| 1990 | Observation of stable crack growth in AL203-ceramics by acoustic microscopy and acoustic emission
Arnold, W.; Quinten, A.; Sklarczyk, C. | Conference Paper |
| 1990 | Überblick und Haupttrends im Bereich Keramiken
Kohlhoff, J. | Book |
| 1989 | Micro-radiography and tomography for high resolution NDT of advanced materials and microstructural components
Höller, P.; Maisl, M.; Reiter, H. | Journal Article |
| 1989 | Nondestructive investigation on new materials and electronics by microfocal radiography and high resolution X-ray computed tomography
Maisl, M.; Reiter, H. | Conference Paper |
| 1989 | PVDF-transducers and their use in NDE of engineering ceramics
Arnold, W.; Pangraz, S. | Conference Paper |
| 1989 | Qualitätssicherung von Komponenten aus keramischen Werkstoffen
Arnold, W.; Pangraz, S.; Reiter, H. | Conference Paper |
| 1989 | Signal processing in acoustic microscopy with applications to nondestructive evaluation
Arnold, W.; Morsch, A. | Conference Paper |
| 1989 | Status of and prospects for cadmium substitution. Product-related protection against emissions
Böhm, E.; Tötsch, W. | Book |
| 1988 | Impact loading and dynamic behaviour of materials. Vol.2
: Meyer, L.W.; Kunze, H.-D.; Chiem, C.Y. | Conference Proceedings |
| 1987 | Crack propagation and strength properties of technical alumina
Kleer, G.; Andritschky, M.; Döll, W. | Conference Paper |
| 1986 | Non-destructive evaluation of ceramic components for engines
Goebbels, K. | Conference Paper |