| | |
|---|
| 2020 | High-throughput direct laser interference patterning: New configurations and applications
Lang, Valentin; Madelung, Aleksander; Alamri, Sabri; Steege, Tobias; Krupop, Benjamin; Aguilar Morales, Alfredo Ismael; Kunze, Tim; Lasagni, Andrés-Fabián | Conference Paper |
| 2020 | Technology Development for Forming and Joining of Lightweight Components
Psyk, Verena; Schönherr, Julia; Trân, Ricardo; Nestler, Matthias | Presentation |
| 2019 | Adhesion Improvement for Solder Interconnection of Wet Chemically Coated Aluminum Surfaces
Rose, A. de; Kamp, M.; Mikolasch, G.; Kraft, A.; Nowottnick, M. | Conference Paper |
| 2019 | Aluminum acceptor activation and charge compensation in implanted p-type 4H-SiC
Weiße, J.; Hauck, M.; Krieger, M.; Bauer, A.J.; Erlbacher, T. | Journal Article |
| 2019 | Channeling in 4H-SiC from an Application Point of View
Pichler, Peter; Sledziewski, Tomasz; Häublein, Volker; Bauer, Anton J.; Erlbacher, Tobias | Conference Paper |
| 2019 | Development of Steps in an Automated Process Chain for Piezoceramic-Metal Compound Production
Drossel, Welf-Guntram; Nestler, Matthias; Hensel, Sebastian | Journal Article |
| 2019 | Hybrid joints of die-casted aluminum/magnesium by ultrasound enhanced friction stir welding (USE-FSW)
Gester, Andreas; Thomä, Marco; Wagner, Guntram; Straß, Benjamin; Wolter, Bernd; Benfer, Sigrid; Fürbeth, Wolfram | Journal Article |
| 2019 | Influence of growth conditions and film thickness on the anodization behavior of sputtered aluminum films and the fabrication of nanorod arrays
Barth, Stephan; Derenko, Susan; Bartzsch, Hagen; Zywitzki, Olaf; Modes, Thomas; Patrovsky, Fabian; Fiehler, Vera; Uhlig, Tino; Frach, P.; Eng, L.M. | Journal Article |
| 2019 | Influence of rolling texture on near-threshold crack extension behavior in aluminum alloy EN AW-6082
Wicke, Marcel; Brückner-Foit, Angelika; Kirsten, Tina; Zimmermann, Martina; Bülbül, Fatih; Christ, Hans-Jürgen | Journal Article |
| 2019 | Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
Heinen, Paul; Eichler, Florian; Häusler, André; Olowinsky, Alexander; Aden, Mirko; Gillner, Arnold; Poprawe, Reinhart | Journal Article |
| 2019 | New core technology for light metal casting
Weise, Jörg; Hilbers, Jennifer; Handels, Farina; Lehmhus, Dirk; Busse, Matthias; Heuser, Michael | Journal Article |
| 2019 | A novel hybrid clamping system for sheet metals and thin walled structures
Teicher, Uwe; Pirl, Sebastian; Nestler, Andreas; Hellmich, Arvid; Ihlenfeldt, Steffen | Journal Article, Conference Paper |
| 2019 | On a Novel Source Technology for Deep Aluminum Diffusion for Silicon Power Electronics
Rattmann, Gudrun; Pichler, Peter; Erlbacher, Tobias | Journal Article |
| 2019 | Realization of a LIBS-based, temporally and spatially resolved welding control
Neumann, Max; Baselt, Tobias; Kabardiadi-Virkovski, Alexander; Winkler, Yves; Hartmann, Peter | Conference Paper |
| 2019 | Surface Roughness and its Prediction in High Speed Milling of Aluminum Alloys with PCD and Cemented Carbide Tools
Teicher, Uwe; Hellmich, Arvid; Ihlenfeldt, Steffen; Pirl, Sebastian; Nestler, Andreas | Journal Article, Conference Paper |
| 2019 | Ultrasonic torsion welding of ageing-resistant Al/CFRP joints: Properties, microstructure and joint formation
Staab, Florian; Balle, Frank | Journal Article |
| 2018 | Alterung und Lebensdauer - Lebensdauerberechnung von Aluminium-Radialverdichterrädern unter Berücksichtigung der Werkstoffalterung
Rockenhäuser, C.; Hartrott, P. von; Metzger, M.; Karlin, J.; Skrotzki, B.; Schweizer, C. | Report |
| 2018 | Anodization of aluminum in highly viscous phosphoric acid. PART 2: Investigation of anodic oxide formation and dissolution rates
Berndt, Lissy; Kleemeier, Malte; Thiel, Karsten; Burchardt, Malte; Hartwig, Andreas | Journal Article |
| 2018 | Creep forming of very thin AlMgSc sheets for aeronautical applications
Zimmermann, Frieder; Brosius, Alexander; Beyer, Eckhard; Standfuß, Jens; Jahn, Axel; Banke, David | Journal Article, Conference Paper |
| 2018 | Defining regional recycling indicators for metals
Tercero Espinoza, Luis A.; Soulier, Marcel | Journal Article |
| 2018 | Impact of Al-ion implantation on the formation of deep defects in n-type 4H-SiC
Weiße, Julietta; Hauck, Martin; Krieger, Michael; Erlekampf, Jürgen; Mitlehner, Heinz; Bauer, Anton J.; Rommel, Mathias; Häublein, Volker; Erlbacher, Tobias; Csato, Constantin; Rüb, Michael; Akhmadaliev, Shavkat; Frey, Lothar | Conference Paper |
| 2018 | Mechanical characterization of integral aluminum-FRP-structures produced by high pressure die-casting
Clausen, Jan; Kelch,Milan; Woestmann, Franz-Josef; Busse, Matthias | Journal Article |
| 2018 | Solder joint analysis on coated aluminum for silicon solar cell interconnection
De Rose, A.; Kraft, A.; Eitner, U.; Nowottnick, M. | Conference Paper |
| 2017 | Investigations of burning phenomena during the hard anodising of aluminium by local in-operando temperature measurements
Lämmel, Christoph; Heubner, Christian; Schneider, Michael; Michaelis, Alexander | Journal Article |
| 2017 | Laser beam welding of atmosphere aluminum die cast material using high frequency beam oscillation and brilliant beam sources
Dittrich, Dirk; Jahn, Axel; Standfuß, Jens; Beyer, Eckhard | Journal Article |
| 2017 | Manufacturing of hybrid aluminum copper joints by electromagnetic pulse welding - identification of quantitative process windows
Psyk, Verena; Scheffler, Christian; Linnemann, Maik; Landgrebe, Dirk | Conference Paper |
| 2017 | Qualitative pivot damage analysis in aluminum printed pantographic sheets: Numerics and experiments
Spagnuolo, M.; Barcz, K.; Pfaff, Aron; dell'Isola, F.; Franciosi, P. | Journal Article |
| 2016 | Adhesion quality of evaporated aluminum layers on passivation layers for rear metallization of silicon solar cells
Kumm, J.; Hartmann, P.; Eberlein, D.; Wolf, A. | Journal Article |
| 2016 | Direct metallization of PMMA with aluminum films using HIPIMS
Bandorf, R.; Waschke, S.; Carreri, F.C.; Vergöhl, M.; Grundmeier, G.; Bräuer, G. | Journal Article, Conference Paper |
| 2016 | TEM investigation of barrier-like anodic oxide films on aluminum
Schneider, Michael; Lämmel, Christoph; Hübner, Ralf; Gierth, Uta; Michaelis, Alexander | Journal Article, Conference Paper |
| 2016 | Workpiece positioning during magnetic pulse welding of aluminum-steel joints
Lorenz, Amanda Leigh; Lueg-Althoff, Jörn; Bellmann, Jörg; Göbel, Gunther; Gies, Soeren; Weddeling, Christian; Beyer, Eckhard; Tekkaya, A. Erman | Journal Article |
| 2015 | Gradation Extrusion - Integration of Severe Plastic Deformation into Impact Extrusion Process
Bergmann, Markus; Oliveira, Raoni B. de; Rautenstrauch, Anja; Selbmann, Rene; Landgrebe, Dirk; Coelho, Rodrigo S. | Presentation |
| 2015 | Large area surface structuring by direct laser interference patterning for adhesive bonding applications
Schiefer, Tom; Jansen, Irene; Bieda, Matthias; Pap, Jozsef-Sebastian; Lasagni, Andrés-Fabián | Journal Article, Conference Paper |
| 2015 | New development of aluminum forging and use of physical and numerical process simulation
Jensrud, Ola; Tomovic-Petrovic, Stanka; Osthus, Rune; Steger, Jürgen | Conference Paper |
| 2014 | Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
Schwankl, M.; Rübner, M.; Flössel, M.; Gebhardt, S.; Michaelis, A.; Singer, R.F.; Koerner, C. | Journal Article |
| 2014 | Development of a double beam process for joining aluminum and steel
Frank, S. | Conference Paper |
| 2014 | The effect of specimen size on residual stresses in friction stir welded aluminum components
Pfeiffer, W.; Reisacher, E.; Windisch, M.; Kahnert, M. | Conference Paper |
| 2014 | Effective photodarkening suppression in Yb-doped fiber lasers by visible light injection
Piccoli, Riccardo; Robin, Thierry; Brand, Thomas; Klotzbach, Udo; Taccheo, Stefano | Journal Article |
| 2013 | High power supercap electrodes based on vertical aligned carbon nanotubes on aluminum
Dörfler, S.; Felhösi, I.; Marek, T.; Thieme, S.; Althues, H.; Nyikos, L.; Kaskel, S. | Journal Article |
| 2013 | In situ temperature measurement on the metal/oxide/electrolyte interface during the anodizing of aluminum
Schneider, M.; Lämmel, C.; Heubner, C.; Michaelis, A. | Journal Article |
| 2013 | Predicting dimensional accuracy of laser welded aluminum add-on body parts
Neugebauer, Reimund; Wahl, Martin; Schulz, Frank; Schützle, Wilhelm; Werner, Stephan; Bernhardi, Otto Ernst; Mauermann, Reinhard | Conference Paper |
| 2012 | Local severe plastic deformation by modified impact extrusion process
Neugebauer, Reimund; Bergmann, Markus | Conference Paper |
| 2012 | Short-time corrosion test for the evaluation of corrosion sensitivity of aluminum alloys for the automotive industry
Troßmann, Torsten; Yu, Liuhao; Bauer, Kathrin; Kaufmann, Heinz; Grimm, Jochen | Conference Paper |
| 2011 | Closed-loop control of laser power using the full penetration hole image feature in aluminum welding processes
Blug, A.; Carl, D.; Höfler, H.; Abt, F.; Heider, A.; Weber, R.; Nicolosi, L.; Tetzlaff, R. | Conference Paper, Journal Article |
| 2011 | In-Line High-Rate Deposition of Aluminum Onto RISE Solar Cells by Electron Beam Technology
Heinß, J.P.; Mader, C.; Merkle, A.; Brendemühl, T.; Brendel, R.; Ehlers, L.; Meyer, R. | Conference Paper |
| 2011 | Overload effects on a ferritic-baintic steel and a cast aluminium alloy: Two very different behaviours
Sonsino, Cetin Morris; Kaufmann, Heinz; Palin-Luc, T.; Saintier, N.; Dsoki, Chalid el; Dumas, Christian; Völlmecke, F.J. | Conference Paper |
| 2010 | Influence of annealing parameters on surface roughness, mobility, and contact resistance of aluminum implanted 4H SiC
Schmitt, H.; Häublein, V.; Bauer, A.J.; Frey, L. | Poster |
| 2009 | Hydro forming at elevated temperatures
Neugebauer, Reimund; Schieck, F. | Conference Paper |
| 2009 | Identifikation schichtbestimmender Prozesskenngrößen bei der Verbundbildung in Aluminium-Magnesiumproben
Kunce, S. | Thesis |
| 2009 | Mechanical properties and microstructure of heavy aluminum bonding wires for power applications
Dresbach, D.; Mittag, M.; Petzold, M.; Milke, M.; Müller, T. | Conference Paper |
| 2007 | Flat-clinch connection - a new connection with plane surface of die side
Riedel, F.; Todtermuschke, M.; Awiszus, B.; Beyer, U. | Conference Paper |
| 2006 | Grundlagenuntersuchungen zum neuen Fügeverfahren matrizenloses Nietclinchen mit überlagerter Bewegung
Neugebauer, Reimund; Dietrich, S. | Report |
| 2006 | Nietclinchen - ein neues Fügeverfahren für die Karosseriefertigung
Neugebauer, Reimund; Dietrich, S.; Mauermann, R. | Conference Paper |
| 2005 | Chances and challenges in joining by forming with a flat counter tool
Neugebauer, Reimund; Dietrich, S.; Mauermann, R. | Conference Paper |
| 2005 | Joining by forming - state of the art and new developments
Neugebauer, Reimund; Kraus, C.; Dietrich, S. | Presentation |
| 2004 | Clinchnieten und Nietclinchen
Haller, J.; Dietrich, S. | Conference Paper |
| 2004 | Multiaxial fatigue behaviour of laser beam welded thin steel sheets for automotive applications
Sonsino, C.M.; Küppers, M.; Eibl, M.; Zhang, G. | Conference Paper |
| 2003 | Entwicklungsfortschritte beim matrizenlosen Clinchen und Nietclinchen
Mauermann, R.; Dietrich, S. | Conference Paper |
| 2003 | Spot-joining - new technologies in the field of joining by forming
Neugebauer, Reimund; Mauermann, R.; Dietrich, S. | Journal Article |
| 2003 | Weniger ist oft mehr - Clinchen ohne Matrize
Voelkner, W.; Dietrich, S.; Mauermann, R. | Journal Article |
| 2002 | Einsatzmöglichkeiten mechanischer Fügeverfahren mit partiellem Umformen
Dietrich, S. | Conference Paper |
| 2002 | Spot-joining - new technologies in the field of joining by forming
Neugebauer, Reimund; Dietrich, S.; Mauermann, R. | Conference Paper |
| 2002 | Welded steel and aluminum joints under multiaxial and random loading
Sonsino, C.M.; Küppers, M. | Conference Paper |
| 2001 | Erweitertes Anwendungsspektrum des Laserstrahlschweißens durch Laser-MIG-Hybridtechnik
Petring, D.; Kaierle, S.; Dahmen, M.; Kasimir, M.; Cottone, F.; Maier, C. | Journal Article |
| 1999 | Light turbocharger compressor wheels from aluminum and magnesium investment casting
Sonsino, C.M.; Kaufmann, H.; Keiper, R. | Report |
| 1999 | Mit Sicherheit schnell. Neue Entwicklungen zum Laserstrahlschneiden von Fein- und Feinstblechen
Petring, D.; Schneider, F.; Thelen, C.; Poprawe, R. | Journal Article |
| 1998 | Bruchmechanische Beschreibung der Wöhlerlinien geometrisch ähnlicher Schweißproben aus Aluminium
Lehrke, H.-P.; Brandt, U.; Sonsino, C.M. | Journal Article |
| 1998 | Design criteria and durability approval of wheel hubs
Fischer, G.; Grubisic, V. | Report |
| 1998 | Influence of Polymer Film Surfaces on Adhesion and Permeation Properties of Vacuum Web Coated High Barrier Films and Laminates. Results of a Cooperative Research Project
Bichler, C.; Mayer, K.; Langowski, H.-C.; Moosheimer, U. | Conference Paper |
| 1997 | Adhesion Mechanism of Aluminum, Aluminum Oxide, and Silicon Oxide on Biaxially Oriented Polypropylene (BOPP), Poly(ethyleneterephthalate) (PET), and Poly(vinyl Chloride) (PVC)
Bichler, C.; Langowski, H.-C.; Moosheimer, U.; Seifert, B. | Journal Article |
| 1997 | Charakterisierung von lasergeschweißten Verbindungen aus der Sicht der Betriebsfestigkeit
Sonsino, C.M.; Kaufmann, H.; Behler, K.; Erhardt, A. | Conference Paper |
| 1997 | Three-dimensional simulation of contact hole metallization using aluminum sputter deposition at elevated temperatures
Bär, E.; Lorenz, J.; Ryssel, H. | Conference Paper |
| 1995 | Shielding against Space Debris. A Comparison between Different Shields: The Effect of Materials on their Performances
Lambert, M.; Schneider, E. | Conference Paper |