Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Fatigue life curve - a continuous Wöhler curve from LCF to VHCF
Wagener, Rainer; Melz, Tobias
Journal Article
2011Accuracy of the modified Wöhler Curve Method applied along with the r ref = 1 mm concept in estimating lifetime of welded joints subjected to multiaxial fatigue loading
Sonsino, C.M.; Susmel, L.; Tovo, R.
Journal Article
2011Accuracy of the modified Wöhler curve method applied along with the r ref=1 mm concept in estimating lifetime of welded joints subjected to multiaxial fatigue loading
Sonsino, Cetin Morris; Susmel, Luca; Tovo, R.
Journal Article
2010On the use of the modified Wöhler Curve Method applied along with the Reference Radius Concept to perform the multiaxial fatigue assessment of welded joint
Sonsino, C.M.; Susmel, L.; Tovo, R.
Conference Paper
2007Course of SN-curves especially in the high-cycle fatigue regime with regard to component design and safety
Sonsino, C.M.
Journal Article
2006Fatigue design related aspects of the woehler-Linie according to the state of the art
Sonsino, C.M.
Conference Paper
2006Usage related design and validation of wheelset axles
Grubisic, V.; Fischer, G.
Conference Paper
2005High-strength steels in welded state for light-weight constructions under high and variable stress peaks
Kaufmann, H.; Sonsino, C.M; Demofonti, G.; Riscifuli, S.
Conference Paper
2001Fatigue Design, Testing and Relability of Ceramic Components by the Example of Intake and Exhaust Valves
Sonsino, C.M.
Conference Paper
2001Fatigue validation of safety components
Fischer, G.; Wessling, U.; Grubisic, V.
Conference Paper
2001Influence of notches on fatigue strength of high performance PM materials
Engström, U.; Lipp, K.; Sonsino, C.M.
Conference Paper
2000Cost reduction by using new Ni-free PM steels
Lipp, K.; Bas, J.; Blanchard, C.; Johansson, M.; Baum, U.
Conference Paper
2000Fatigue design with cast magnesium alloys
Sonsino, C.M.; Dieterich, K.; Wenk, L.
Conference Paper
1999Bruchverhalten von angerissenen Bauteilen unter schlagartiger und schwingender Belastung
Fischer, G.; Sonsino, C.M.
Book
1999Data for the design of welded aluminum sheet suspension components
Fischer, G.; Grubisic, V.
Report
1999Einfluss der Schweissnahtgeometrie auf die Schwingfestigkeit von Aluminiumschweissverbindungen am Beispiel der Knetlegierung AlMg 4.5 Mn (AA5083)
Sonsino, C.M.; Brandt, U.
Book
1999Entwicklung von breiten und leichten Radialventilatoren mit geschweißten Hybrid-Laufschaufeln
Keiper, R.; Sonsino, C.M.
Conference Paper
1999Fatigue assessment of aluminium weldments by different stress concentration
Brandt, U.; Lawrence, F.V.; Sonsino, C.M.
Conference Paper
1999Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1999Fatigue Behaviour of Welded Medium and High Strength Steels
Sonsino, C.M.; Kaufmann, H.; Budano, S.; Demfonti, G.; Hanus, F.; Wegmann, H.; Sedlacek, G.; Müller, C.
Book
1999Fatigue design using ceramics
Sonsino, C.M.
Conference Paper
1999Interim fatigue design recommendations of fillet welded joints under complex loading
Maddox, S.J.; Razmjoo, G.; Sonsino, C.M.
Book
1999Keramik- und Stahlventile des PKW-Motorenbaus im Vergleich
Brandt, U.; Reinheimer, G.; Mörgenthaler, K.
Conference Paper
1999Kostenreduzierung durch nickelfreie Sinterstähle
Lipp, K.; Baum, U.
Conference Paper
1999Materialermüdung. Modellbildungen zur Ermittlung der Betriebsfestigkeit technischer Konstruktionen
Seeger, T.; Sonsino, C.M.; Vormwald, M.; Amstutz, H.
Journal Article
1999Rolling contact fatigue. Component design and testing for P/M applications
Hoffmann, G.; Sonsino, C.M.; Michaelis, K.
Report
1999Theoretische und experimentelle Untersuchungen für eine Bemessung und serienreife Entwicklung von Ein- und Auslassventilen aus Siliziumnitrid
Sonsino, C.M.; Brandt, U.; Stoerzel, K.
Conference Paper
1998Bemessung eines Nutzfahrzeugachsenschenkels mit Hilfe der FKM-Richtlinie. Vergleich, Berechnung, Experiment
Oppermann, H.; Sonsino, C.M.
Conference Paper
1998Bemessung von Fahrzeugkomponenten auf Basis abgeleiteter Lastzeitfunktionen mittels numerischer Simulation
Wessling, U.; Rupp, A.
Conference Paper
1998Betriebsbeanspruchung und Festigkeitsnachweis von Schienenfahrzeugrädern
Fischer, G.; Grubisic, V.
Journal Article
1998Bruchmechanische Beschreibung der Wöhlerlinien geometrisch ähnlicher Schweißproben aus Aluminium
Lehrke, H.-P.; Brandt, U.; Sonsino, C.M.
Journal Article
1998Fatigue assessment of welded joints by local approaches
Radaj, D.; Sonsino, C.M.
Book
1998Fatigue assessment of welded joints in AlMg4.5Mn aluminium alloy by local approaches
Sonsino, C.M.; Radaj, U.; Brandt, U.; Lehrke, H.P.
Book
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design and testing of components
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Materials technology drives impeller design
Sonsino, C.M.
Journal Article
1998Optimization of process parameters for induction heat treating by means of numerical simulation
Schöpfel, A.; Störzel, K.
Conference Paper
1998Prediction of service fatigue strength of awelded tubular joint on the basis of the notch strain approach
Radaj, D.; Sonsino, C.M.; Flade, D.
Journal Article
1998Schwingfestigkeit wetterfester Stähle nach 10- bis 20-jähriger Bewitterung
Sonsino, C.M.; Müller, F.
Report
1997Betriebsfestigkeit von Schweißverbindungen unter mehrachsigen Spannungen mit variablen Amplituden
Sonsino, C.M.; Küppers, M.
Conference Paper
1997Charakterisierung von lasergeschweißten Verbindungen aus der Sicht der Betriebsfestigkeit
Sonsino, C.M.; Kaufmann, H.; Behler, K.; Erhardt, A.
Conference Paper
1997Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1997Methodik zur effektiven Dimensionierung und Bewertung der Betriebsfestigkeit von Fahrwerkskomponenten
Wessling, U.; Fischer, G.; Grubisic, V.
Conference Paper
1997Methodology for effective design evaluation and durability approval of car suspension components
Grubisic, V.; Fischer, G.
Report
1997On the use of the weight function approach to study fatigue crack growth in cast iron components
Fontanari, V.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1997Schwingfestigkeit wetterfester Baustähle nach langjähriger Bewitterung
Floßdorf, F.-J.; Ehl, J.; Müller, F.; Pircher, H.; Schmidt-Zinges, J.; Schriever, U.; Sonsino, C.M.
Journal Article
1997Vorhersage der Betriebsfestigkeit eines geschweißten Rohrknotens auf Basis lokaler Konzepte
Radaj, D.; Sonsino, C.M.; Flade, D.
Conference Paper
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Conference Paper
1996Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M.
Journal Article
1996Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M.
Journal Article
1996Inverse hardness distribution and its influence on mechanical properties
Liscic, B.; Grubisic, V.; Totten, G.E.
Conference Paper
1995Anwendung von Faserverbundkunststoffen im Schiffbau
Gerharz, J.J.; Huth, H.; Nowack, H.
Conference Paper
1995Betriebsfestigkeit von torsionsbelasteten Wellen für Automatgetriebe
Foth, J.; Jauch, F.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1995Evoluzione storica dei criteri di progettazione, le necessita attuali, le prospettive future
Grubisic, V.
Journal Article
1995Fatigue behaviour of aluminium castings. Effect of porosity on design
Sonsino, C.M.
Conference Paper
1995Korrosionsschwingfestigkeit von punktgeschweißten, verzinkten Feinblechen des Fahrzeugbaus
Dietrich, K.; Sonsino, C.M.
Conference Paper
1992Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G.
Journal Article
1992Schwingfeste Bauteilbemessung mit höherfesten Stählen. Tl.1. Hinweise zu Konstruktion und Bemessung
Hanewinckel, D.; Sonsino, C.M.
Journal Article
1992Schwingfeste Bauteilbemessung mit höherfesten Stählen. Tl.2. Schwingfestigkeitskennwerte
Hanewinckel, D.; Sonsino, C.M.
Journal Article
1991Mehrachsig schwingbeanspruchte Schweißverbindungen. Hypothesen - Regelwerke - Experimentelle Untersuchungen
Sonsino, C.M.
Conference Paper
1991Present level of knowledge on fatigue strength of sintered steels
Sonsino, C.M.
Conference Paper
1990Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1990Fatigue strength of materials and structures under operational stresses
Grubisic, V.
Conference Paper
1990Schwingfestigkeit wetterfester Baustähle
Müller, F.; Sonsino, C.M.
Book