Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2021Adiabatic Blanking: Influence of Clearance, Impact Energy, and Velocity on the Blanked Surface
Winter, Sven; Nestler, Matthias; Galiev, Elmar; Hartmann, Felix; Psyk, Verena; Kräusel, Verena; Dix, Martin
Journal Article
2021Erfassung physiologischer Parameter im Kontext zur Erkennung von Stressreaktionen und Stressursachen von Pflegekräften in der Palliativmedizin
Jähnig, Alina
: Schulz, Stefan M. (Erstprüfer); Chodan, Wencke (Zweitprüferin)
Master Thesis
2021IC package related stress effects on the characteristics of ring oscillator circuits
Schlipf, Simon; Sander, Christoph; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried
Conference Paper
2021Piezoresistive characteristics of MOSFET channels determined with indentation
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried
Journal Article
2021Stress-induced transistor degradation studied by an indentation approach
Schlipf, Simon; Clausner, André; Paul, Jens; Capecchi, Simone; Wambera, Laura; Meier, Karsten; Zschech, Ehrenfried
Journal Article
2021Zusammenhang von Resilienz und Selbstmitgefühl mit Stresserleben und körperlichen Stresssymptomen
Alonzo, Jennifer
Study
2020Experimental and numerical investigation on the influence of thermally induced stress gradients on fatigue life of the nickel-base alloy MAR-M247
Thiele, M.; Eckmann, S.; Huang, M.; Gampe, U.; Fischer, K.A.; Schlesinger, M.
Journal Article
2020FEM-study for solder model comparison on solder joints stress-strain effects
Schwerz, Robert; Metasch, René; Röllig, Mike; Meier, Karsten
Conference Paper
2020More Realistic Consideration of Backsheets Coefficient of Thermal Expansion on Thermomechanics of PV Modules
Romer, P.; Oreski, G.; Beinert, A.J.; Neuhaus, H.; Mittag, M.
Conference Paper
2020Probabilistic fracture mechanics framework including crack nucleation of rotor forging flaws
Radaelli, F.; Kadau, K.; Amann, C.; Gumbsch, P.
Conference Paper
2019Accelerated TC Test in Comparison with Standard TC Test for PV Modules with Ribbon, Wire and Shingle Interconnection
Schiller, C.; Rendler, L.C.; Eberlein, D.; Mülhöfer, G.; Kraft, A.; Neuhaus, D.-H.
Conference Paper
2019The Acousto-elastic Effect and its Use in NDE
Herzer, Hans-Rüdiger; Becker, Michael Mathias; Schneider, Eckhardt
Book Article
2019Identification of Soft Failure Mechanisms Triggered by ESD Stress on a Powered USB 3.0 Interface
Koch, Sebastian; Orr, Benjamin J.; Gossner, H.; Gieser, Horst A.; Maurer, Linus
Journal Article
2019Thermochemical Stress in Solar Cells: Contact Pad Modeling and Reliability Analysis
Rendler, L.; Romer, P.; Beinert, A.; Stecklum, S.; Kraft, A.; Eitner, U.; Wiese, S.
Journal Article
2019Thermomechanical Evaluation of New PV Module Designs by FEM Simulations
Beinert, A.; Romer, P.; Heinrich, M.; Mittag, M.; Aktaa, J.; Neuhaus, D.H.
Conference Paper
2018The acousto-elastic effect and its use in NDE
Herzer, Hans-Rüdiger; Becker, Michael Mathias; Schneider, Eckhardt
Book Article
2018EEG-based mental workload and stress monitoring of crew members in maritime virtual simulator
Lim, Wei Lun; Liu, Yisi; Subramaniam, Salem Chandrasekaran Harihara; Liew, Serene Hui Ping; Krishnan, Gopala; Sourina, Olga; Konovessis, Dimitrios; Ang, Hock Eng; Wang, Lipo
Conference Paper
2018Laser Speckle Photometry for Stress Measuring at Industrial Components
Chen, Lili; Cikalova, Ulana; Münch, Stefan; Röllig, Mike; Bendjus, Beatrice
Conference Paper
2018Mechanical and electrical properties of wave-shaped wires for low-stress interconnection of solar cells
Rendler, L.; Walter, J.; Goldenberg, S.; Beinert, A.J.; Wiese, S.; Eitner, U.
Journal Article
2018Sputum proteomics and airway cell transcripts of current and ex-smokers with severe asthma in U-BIOPRED: An exploratory analysis
Takahashi, Kentaro; Pavlidis, Stelios; Ng Kee Kwong, Francois; Hoda, Uruj; Rossios, Christos; Sun, Kai; Loza, Matthew; Baribaud, Fred; Chanez, Pascal; Fowler, Steve J.; Horvath, Ildiko; Montuschi, Paolo; Singer, Florian; Musial, Jacek; Dahlén, Barbro; Dahlén, Sven-Erik; Krug, Norbert; Sandström, Thomas; Shaw, Dominick E.; Lutter, René; Bakke, Per; Fleming, Louise J.; Howarth, Peter H.; Caruso, Massimo; Sousa, Ana R.; Corfield, Julie; Auffray, Charles; Meulder, Bertrand de; Lefaudeux, Diane; Djukanovic, Ratko; Sterk, Peter J.; Guo, Yike; Adcock, Ian M.; Chung, Kian Fan
Journal Article
2018Stress mapping by confocal raman spectroscopy on solar cells and modules
Beinert, Andreas J.; Büchler, A.; Romer, P.; Heinrich, M.; Schubert, M.C.; Aktaa, J.; Eitner, U.
Conference Paper
2018Wave-Shaped Wires Soldered on the Finger Grid of Solar Cells: Solder Joint Stability under Thermal Cycling
Rendler, L.; Haryantho, A.P.; Walter, J.; Huyeng, J.; Kraft, A.; Wiese, S.; Eitner, U.
Conference Paper
2017Carrier mobility shift in advanced silicon nodes due to chip-package interaction
Sukharev, Valeriy; Choy, Jun-Ho; Kteyan, Armen; Hovsepyan, Henrik; Nakamoto, Mark; Zhao, Wei; Radojcic, Riko; Mühle, Uwe; Zschech, Ehrenfried
Journal Article
2017Design blueprint for stress-sensitive adaptive enterprise systems
Adam, Marc T.P.; Gimpel, Henner; Mädche, Alexander; Riedl, René
Journal Article
2017FEM-based development of novel back-contact PV modules with ultra-thin solar cells
Beinert, Andreas; Leidl, Roman; Sommeling, Paul; Eitner, Ulrich; Aktaa, Jarir
Conference Paper
2017Human factors evaluation in maritime virtual simulators using mobile EEG-based neuroimaging
Liu, Yisi; Sourina, Olga; Liew, Hui Ping; Salem Chandrasekaran, Harihara Subramaniam; Konovessis, Dimitrios; Krishnan, Gopala; Ang, Hock Eng
Conference Paper
2017Ultra-soft wires for direct soldering on finger grids of solar cells
Rendler, L.C.; Walter, J.; Kraft, A.; Ebert, C.; Wiese, S.; Eitner, U.
Journal Article
2016Investigation of Thermomechanical Stress in Solar Cells with Multi Busbar Interconnection by Finite Element Modeling
Rendler, L.C.; Kraft, A.; Ebert, C.; Wiese, S.; Eitner, U.
Conference Paper
2016Neuroscience based design: Fundamentals and applications
Sourina, Olga; Liu, Yisi; Hou, Xiyuan; Lim, Wei Lun; Müller-Wittig, Wolfgang K.; Wang, Lipo; Konovessis, Dimitrios; Chen, Chun-Hsien; Ang, Wei Tech
Conference Paper
2016Post drain-stress behavior of AlGaN/GaN-on-Si MIS-HEMTs
Jauss, S.A.; Kilian, S.; Schwaiger, S.; Noll, S.; Daves, W.; Ambacher, O.
Journal Article
2015Charakterisierung und Modellierung freistehender Silizium Membranen auf SOI-Basis für Drucksensor-Anwendungen
Goehlich, Andreas; Jupe, Andreas; Stühlmeyer, Martin; Celik, Yusuf; Schmidt, Alexander; Vogt, Holger
Conference Paper
2015Non-destructive stress determination of steel elements in pre-stressed constructions using micromagnetic and ultrasound methods
Kurz, Jochen Horst; Szielasko, Klaus; Tschuncky, Ralf
Conference Paper
2014Towards efficient integrated piezoelectric transducers for sensing, actuation and SHM
Neumeister, Peter; Flössel, Markus; Eßlinger, Sophia; Gebhardt, Sylvia; Schönecker, Andreas
Conference Paper
2013Abscisic acid-dependent regulation of small rubber particle protein gene expression in taraxacum brevicorniculatum is mediated by TbbZIP1
Fricke, Julia; Hillebrand, Andrea; Twyman, Richard M.; Prüfer, Dirk; Schulze Gronover, Christian
Journal Article
2013Coating processes for plastic optics
Schulz, Ulrike
Journal Article
2013Fatigue assessment of welded thin joints by a stress averaging and critical distance approach
Baumgartner, Jörg; Schmidt, Halvar; Ince, Erdeniz; Melz, Tobias; Dilger, Klaus
Conference Paper
2013Influence of a defined pre-load on the stress state in the precision cutting process
Neugebauer, Reimund; Kräusel, Verena; Barthel, Tom; Jesche, Fred; Schönherr, Julia
Journal Article
2013Numerical simulation of organic binder decomposition during thermal debinding
Kraft, T.; Schmidt, I.; Riedel, H.; Svoboda, J.; Kestler, H.; Wagner, J.
Conference Paper
2012Doping induced lattice misfit in 4H-SiC homoepitaxy
Kallinger, Birgit; Berwian, Patrick; Friedrich, Jochen; Müller, Georg; Weber, Arnd-Dietrich; Volz, Eduard; Trachta, Gerd; Spiecker, Erdmann; Thomas, Bernd
Journal Article
2012Evaluation on AIN material properties through vibration analysis of thin membranes
Lebedev, V.; Knöbber, F.; Heidrich, N.; Sah, R.E.; Pletschen, W.; Cimalla, V.; Ambacher, O.
Journal Article
2012Guidelines for the use and interpretation of assays for monitoring autophagy
Klionsky, D.J.; Abdalla, F.C.; Abeliovich, H.; Abraham, R.T.; Acevedo-Arozena, A.; Adeli, K.; Agholme, L.; Agnello, M.; Agostinis, P.; Aguirre-Ghiso, J.A.; Ahn, H.J.; Ait-Mohamed, O.; Ait-Si-Ali, S.; Akematsu, T.; Akira, S.; Al-Younes, H.M.; Al-Zeer, M.A.; Albert, M.L.; Albin, R.L.; Alegre-Abarrategui, J.; Aleo, M.F.; Alirezaei, M.; Almasan, A.; Almonte-Becerril, M.; Amano, A.; Amaravadi, R.; Amarnath, S.; Amer, A.O.; Andrieu-Abadie, N.; Anantharam, V.; Ann, D.K.; Anoopkumar-Dukie, S.; Aoki, H.; Apostolova, N.; Arancia, G.; Aris, J.P.; Asanuma, K.; Asare, N.Y.O.; Ashida, H.; Askanas, V.; Askew, D.S.; Auberger, P.; Baba, M.; Backues, S.K.; Baehrecke, E.H.; Bahr, B.A.; Bai, X.-Y.; Bailly, Y.; Baiocchi, R.; Baldini, G.; Balduini, W.; Ballabio, A.; Bamber, B.A.; Bampton, E.T.W.; Bánhegyi, G.; Bartholomew, C.R.; Bassham, D.C.; Bast Jr., R.C.; Batoko, H.; Bay, B.-H.; Beau, I.; Béchet, D.M.; Begley, T.J.; Behl, C.; Behrends, C.; Bekri, S.; Bellaire, B.; Bendall, L.J.; Benetti, L.; Berliocchi, L.; Bernardi,
Journal Article
2011Electromagnetism as a means for understanding materials mechanics phenomena in magnetic materials
Boller, Christian; Altpeter, Iris; Dobmann, Gerd; Rabung, Madalina; Schreiber, J.; Szielasko, Klaus; Tschuncky, Ralf
Journal Article
2011Homoepitaxial growth and defect characterization of 4H-SiC epilayers
Kallinger, Birgit; Thomas, Bernd; Berwian, Patrick; Friedrich, Jochen; Weber, Arnd-Dietrich; Volz, Eduard; Trachta, Gerd; Spiecker, Erdmann
Presentation
2011Stress potential analysis of solar wafer and cells during conveyor belt handling
Wertz, Roland; Böttinger, Fabian; Fischmann, Christian; Konstandin, Marcel; Verl, Alexander
Conference Paper
2010Fatigue behaviour of welded joints from magnesium alloy (AZ31) according to the local strain concept
Karakas, Ö.; Gülsöz, A.; Sonsino, C.M.; Kaufmann, H.
Journal Article
2010Non-destructive evaluation of reinforced concrete structures. Vol.1: Deterioration processes and standard test methods
: Maierhofer, C.; Reinhardt, H.-W.; Dobmann, G.
Scientific Anthology
2010Relevance of highly stressed volume for the fatigue design of sintered components
Lipp, K.; Beiss, P.; Hofferberth, D.; Zafari, A.
Conference Paper
2010Review of stress effects on dopant solubility in silicon and silicon-germanium layers
Bennett, N.S.; Ahn, C.; Cowern, N.E.B.; Pichler, P.
Conference Paper
2009The correlation between mechanical stress, thermal shift and refractive index in HfO2, Nb2O5, Ta2O5 and SiO2 layers and its relation to the layer porosity
Stenzel, O.; Wilbrandt, S.; Kaiser, N.; Vinnichenko, M.; Munnik, F.; Kolitsch, A.; Chuvilin, A.; Kaiser, U.; Ebert, J.; Jakobs, S.; Kaless, A.; Wuethrich, S.; Treichel, O.; Wunderlich, B.; Bitzer, M.; Grössl, M.
Journal Article
2009Magnetic Barkhausen noise analysis in the audio frequency range
Szielasko, K.; Altpeter, I.; Rabung, M.
Conference Paper
2009Microstructure effect on EM-induced degradations in dual inlaid copper interconnects
Sukharev, Valeriy; Kteyan, Armen; Zschech, Ehrenfried; Nix, W.D.
Journal Article
2009Packaging influence on laser bars of different dimensions
Westphalen, T.; Leers, M.; Werner, M.; Traub, M.; Hoffmann, H.-D.; Ostendorf, R.
Conference Paper
2009Performance modification of SiC MEMS
Niebelschütz, F.; Brueckner, K.; Cimalla, V.; Hein, M.A.; Pezoldt, J.
Conference Paper
2009Testing the feasibility of new ceramic cutting tools - a case study on experimental and numerical evaluation of geometry and machining techniques
Renz, A.; Kailer, A.; Koplin, C.
Conference Paper
2008Cyclic parameters for non-compatible material behaviour
Dsoki, C. el; Landersheim, V.; Hanselka, H.; Nieslony, A.; Kaufmann, H.; Krug, P.
Conference Paper
2008Helium and radiation defect accumulation in metals under stress
Dobmann, G.; Korshunov, S.N.; Kröning, M.; Martynenko, Y.V.; Skorlupkin, I.D.; Surkov, A.S.
Journal Article
2008High-strength steels in welded state for light-weight constructions under high and variable stress peaks
Kaufmann, H.; Sonsino, C.M.; Demofonti, G.; Riscifuli, S.
Journal Article
2008The structure of Mo/Si multilayers prepared in the conditions of ionic assistance
Zubarev, E.N.; Kondratenko, V.V.; Sevryukova, V.A.; Yulin, S.A.; Feigl, T.; Kaiser, N.
Journal Article
2007Grundlagen für die praktische Anwendung des Kerbspannungskonzeptes zur Schwingfestigkeitsbewertung von geschweißten Bauteilen aus Magnesiumknetlegierungen
Karakas, Ö.; Morgenstern, C.; Sonsino, C.M.; Hanselka, H.; Vogt, M.; Dilger, K.
Report
2006Fatigue design of aluminium welded joints by the local stress concept with the fictious notch radius of r(f)=1 mm
Morgenstern, C.; Sonsino, C.M.; Hobbacher, A.; Sorbo, F.
Journal Article
2006Fatigue design with cast magnesium alloys under constant and variable amplitude loading
Sonsino, C.M.; Dieterich, K.
Journal Article
2006Spatially resolved X-ray diffraction measurements on (Al,Ga)N/GaN/4H-SiC heterostructures for electronic devices
Kirste, L.; Müller, S.; Kiefer, R.; Quay, R.; Köhler, K.; Herres, N.
Conference Paper
2005Durability transfer concept for the monitoring of load and stress conditions on vehicles
Rupp, A.; Masieri, A.; Dornbusch, T.
Conference Paper
2005Fatigue behaviour of short fiber reinforced polyamide under multiaxial loading with constant and changing principal stress directions - consideration of the lightly anisotropic material property
Bolender, K.; Büter, A.; Gerharz, J.; Moosbrugger, E.
Conference Paper
2005Passivation of III-V-based compound semiconductor devices using high-density plasma deposited silicon nitride films
Sah, R.E.; Mikulla, M.; Schneider, H.; Benkhelifa, F.; Dammann, M.; Quay, R.; Fleißner, J.; Walther, M.; Weimann, G.
Conference Paper
2004Evaluation of stress states and mechanical properties of rolled products using electromagnetic and ultrasonic methods
Schneider, E.
Journal Article
2003Fatigue life assessment
Sonsino, C.M.; Bruder, T.
Conference Paper
2002Experimental and numerical methods for the specification of loads, stresses and strains for fatigue strength investigations
Kieninger, M.; Klätschke, H.
Conference Proceedings
2001Comparison of strain/stress measurements on free form surfaces using ESPI and strain gauge technique
Lemos, J. de; Mischo, H.; Pfeifer, T.
Conference Paper
2001Concepts and Required Materials Data for Fatigue Design of PM Components
Sonsino, C.M.
Conference Paper
2001Effect of deposition parameters on optical and mechanical properties of MF- and DC-sputtered Nb2O5-films
Hunsche, B.; Vergöhl, M.; Neuhäuser, H.; Klose, F.; Szyszka, B.; Matthee, T.
Journal Article
2001Fatigue Behaviour of Welded Aluminium under Multiaxial Loading
Sonsino, C.M.; Küppers, M.
Conference Paper
2001Fatigue crack initiation and growth in AlMg4.5Mn butt weldments
Sonsino, C.M.; Brandt, U.; Lawrence, F.
Journal Article
2001Fatigue Design, Testing and Relability of Ceramic Components by the Example of Intake and Exhaust Valves
Sonsino, C.M.
Conference Paper
2001High-strength steels in welded state for lightweight constructions under high and variable stress peaks
Demofonti, G.; Riscifuli, S.; Sonsino, C.M.; Kaufmann, H.; Sedlacek, G.; Müller, C.; Hanus, F.; Wegmann, H.G.
Book
2001Multiaxial fatigue of welded joints under constant and variable amplitude loadings
Sonsino, C.M.; Küppers, M.
Journal Article
2001Multiaxial fatigue of welded structures - Problems and present solutions
Sonsino, C.M.; Maddox, S.J.
Conference Paper
2001Simulation of the experimental proof out of wheels and hubs
Rupp, A.; Heinrietz, A.; Ehl, O.
Conference Paper
2001Theoretical fatigue. Effective notch stresses at spot welds
Radaj, D.; Lehrke, H.-P.; Greuling, S.
Journal Article
2000Analysis of HBT behavior after strong electrothermal stress
Palankovski, V.; Selberherr, S.; Quay, R.; Schultheis, R.
Conference Paper
2000Service Load and Stress Distribution for P/M Gear Components
Rupp, A.; Sonsino, C.M.; Radereau, D.
Report
1999Berechnung von Formzahlen für Schweißverbindungen
Lehrke, H.P.
Journal Article
1999Chemical vapour deposition of polycrystalline diamond films on high-speed steel
Schäfer, L.; Fryda, M.; Stolley, T.; Xiang, L.; Klages, C.-P.
Journal Article
1999Data for the design of welded aluminum sheet suspension components
Fischer, G.; Grubisic, V.
Report
1999Effect of aging on stress in silicon nitride films deposited by electron cyclotron resonance plasma-enhanced chemical vapor deposition technique
Sah, R.E.; Baumann, H.; Serries, D.; Kiefer, R.; Braunstein, J.
Conference Paper
1999Elastische und mechanische Eigenschaften von CVD-Diamant
Pleuler, E.
Thesis
1999Interim fatigue design recommendations of fillet welded joints under complex loading
Maddox, S.J.; Razmjoo, G.; Sonsino, C.M.
Book
1999Kostenreduzierung durch nickelfreie Sinterstähle
Lipp, K.; Baum, U.
Conference Paper
1999Mechanical stress in fluoride coatings
Ullmann, J.; Keck, H.G.; Thielsch, R.; Uhlig, H.; Kaiser, N.
Conference Paper
1999Overview of the state of the art on multiaxial fatigue of welds
Sonsino, C.M.
Conference Paper
1999Schwingfestigkeit induktionsgehärteter Bauteile aus AFP-Stählen
Kaufmann, H.; Sonsino, C.M.
Journal Article
1999Strain/stress measurements using combined ESPI contouring and deformation measurements
Pfeifer, T.; Mischo, H.; Lemos, J. de; Wegner, R.
Conference Paper
1998Betriebsfestigkeitsverhalten einer Auswahl von nichtrostenden Stählen für den Anlagen- und Waggonbau. Abschlußbericht
Müller, F.; Sonsino, C.M.
Book
1998Comparison of procedures for experimental and theoretical durability approval of a truck axle
Dini, A.; Rupp, A.
Report
1998Design criteria and durability approval of wheel hubs
Fischer, G.; Grubisic, V.
Report
1998Durability approval of leaf springs under operational loading
Fischer, G.; Streicher, M.; Grubisic, V.
Report
1998Fatigue assessment of welded joints in AlMg4.5Mn aluminium alloy by local approaches
Sonsino, C.M.; Radaj, U.; Brandt, U.; Lehrke, H.P.
Book
1998Rolling contact fatigue behaviour of sintered steels. Endurable Hertzian pressures and damage mechanisms
Lipp, K.; Sonsino, C.M.; Pohl, D.; Hock, S.
Conference Paper
1998Strain/stress measurements using electronic speckle pattern interferometry
Pfeifer, T.; Mischo, H.; Ettemeyer, A.; Wang, Z.; Wegner, R.
Conference Paper
1997Bemessungskriterien zum Leichtbau von Rädern
Grubisic, V.; Fischer, G.
Book Article
1997Betriebsfestigkeit von Schweißverbindungen unter mehrachsigen Spannungen mit variablen Amplituden
Sonsino, C.M.; Küppers, M.
Conference Paper
1997Charakterisierung von lasergeschweißten Verbindungen aus der Sicht der Betriebsfestigkeit
Sonsino, C.M.; Kaufmann, H.; Behler, K.; Erhardt, A.
Conference Paper
1997An Experimental Study to Investigate Hypervelocity Impacts on Pressure Vessels
Schäfer, F.; Schneider, E.; Lambert, M.
Conference Paper
1997Fatigue strength of driving shafts of automatic transmission gearboxes unter operational torques
Sonsino, C.M.; Kaufmann, H.; Foth, J.; Jauch, F.
Journal Article
1997Innere Spannungen und Relaxionseffekte in metallischen Leitbahnen mikroelektronischer Bauelemente
Schreiber, J.; Köhler, B.; Meissner, O.; Melov, V.G.
Conference Paper
1997Methodik zur effektiven Dimensionierung und Bewertung der Betriebsfestigkeit von Fahrwerkskomponenten
Wessling, U.; Fischer, G.; Grubisic, V.
Conference Paper
1997Methodology for effective design evaluation and durability approval of car suspension components
Grubisic, V.; Fischer, G.
Report
1997Overview of the state of the art on multiaxial fatigue of welds
Sonsino, C.M.
Conference Paper
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Journal Article
1997Transferability of material data for the example of a randomly loaded forged truck stub axle
Sonsino, C.M.; Kaufmann, H.; Grubisic, V.
Report
1996Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M.
Journal Article
1996Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M.
Journal Article
1996Fatigue life of welded stainless steels
Sonsino, C.M.; Müller, F.; Hölscher, M.; Krautschick, J.; Schmitz, K.; Uhlig, G.; Behr, F.; Körber, C.
Conference Paper
1996Grundlagen für die Dimensionierung von schrumpfgeklebten Welle-Nabe-Verbindungen
Tersch, H.
Report
1996Requirements for operational fatigue strength of high quality cast components
Sonsino, C.M.; Grubisic, V.
Journal Article
1995Auswahl von Materialgesetzen und Parameteridentifikation für nichtlinear-elastische Werkstoffe
Görke, U.-J.; Günther, H.; Schöpfel, A.
Journal Article
1995Bemessungskriterien zum Leichtbau von Rädern
Grubisic, V.; Fischer, G.
Conference Paper
1995Betriebsfeste Bemessung von Stahlkonstruktionen im Anlagenbau
Grubisic, V.; Sonsino, C.M.
Journal Article
1995Betriebsfestigkeit von torsionsbelasteten Wellen für Automatgetriebe
Foth, J.; Jauch, F.; Sonsino, C.M.; Kaufmann, H.
Conference Paper
1995Hochwertige Gußbauteile - Forderungen zur Betriebsfestigkeit
Sonsino, C.M.; Grubisic, V.
Conference Paper
1995Hochwertige Gußbauteile - Forderungen zur Betriebsfestigkeit
Sonsino, C.M.; Grubisic, V.
Journal Article
1995Simulation and measurement of complex, multi-axial, dynamic stress states on vehicle axle components
Müller, A.; Grubisic, V.
Journal Article
1995Das Simultanverfahren zur Extrapolation und Raffung von mehraxialen Belastungs-Zeitfunktionen für Schwingfestigkeitsversuche
Klätschke, H.; Schütz, D.
Journal Article
1995Verfahren zur Festigkeitsbeurteilung von mehrachsig stochastisch beanspruchtem Sphäroguß und Temperguß
Müller, A.
Journal Article
1994Ermittlung ertragbarer Beanspruchungen am Schweißpunkt auf Basis der übertragenen Schnittgrößen
Rupp, A.; Grubisic, V.; Dilthey, U.; Marek, U.; Graffe, M.; Graf, G.; Dittmann, K.-J.
Book
1994Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M.
Book
1994Standardisiert korrodierende Gläser als Sensoren für den Denkmalschutz
Fuchs, D.R.
Journal Article
1994Ultrasonic characterization of stress states in rims of railroad wheels
Schneider, E.; Herzer, H.-R.; Hintze, H.; Rode, W.
Conference Paper
1993Preparation, properties and structure of metal containing amorphous hydrogenated carbon films
Grischke, M.; Bewilogua, K.; Dimigen, H.
Journal Article
1993Residual stress during local SIMOX process - Raman measurement and simulation
Seidl, A.; Takai, M.; Sayama, H.; Haramura, K.; Ryssel, H.; Schork, R.; Kato, K.
Journal Article
1993Verschleiß durch kombinierte Scher- und Druckbeanspruchung.
Geißler, A.
Conference Paper
1992Betriebsfestigkeit. Sichere und wirtschaftliche Bemessung schwingbruchgefährdeter Bauteile. 2.erw.Aufl.
Buxbaum, O.
Book
1992Diamond membrane based X-ray masks
Löchel, B.; Huber, H.-L.; Klages, C.-P.; Schäfer, L.; Bluhm, A.
Journal Article
1992Effect of process parameters on the residual stresses and the wear behavior of aluminium nitride physical vapor deposition coatings.
Kleer, G.; Kassner, R.; Meyer, E.-M.; Schinker, M.G.; Döll, W.
Journal Article
1992Entwicklung neuartiger Umhüllmassen für die Mikroelektronik
Gesang, T.; Hennemann, O.-D.
Journal Article
1992Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G.
Journal Article
1992Measurement of mechanical properties of thin solid films -hardness, elasticity, stress-
Taube, K.
Conference Paper
1992Preparation of c-BN containing films by reactive r.f. sputtering
Bewilogua, K.; Buth, J.; Hübsch, H.; Grischke, M.
Journal Article
1992Stress compensation techniques in thin layers applied to silicon micromachining
Mück, G.; Bausells, J.; Csepregi, L.; Moldovan, N.; Suski, J.; Lang, W.
Conference Proceedings
1992Structures designed for operational loadings
Buxbaum, O.
Book Article
1992Time-dependent stress and strain distribution in blastloaded steelplates.
Gürke, G.
Conference Paper
1991Anrissermittlung mit dem Gleichstrom-Potentialsonden-Verfahren
Müller, F.
Book
1991Durch Druckspannungen hervorgerufene makro- und mikro-mechanische Phänomene in planar beaufschlagtem TiB2
Stilp, A.J.; Winkler, W.-D.
Conference Proceedings
1991Fatigue life prediction for large size components
Sonsino, C.M.
Conference Paper
1991Spallationsverhalten von planar beaufschlagtem TiB2, SiC und B4C
Stilp, A.J.; Winkler, W.-D.
Conference Proceedings
1990Constitutive equations for dynamically loaded polymer solids and their application in a finite element program
Geißler, E.; Weber, H.
Conference Paper
1990Dynamic material properties of a closed-cell polyethylene foam
Geißler, A.; Weber, H.
Conference Paper
1990Dynamic material properties of a closed-cell polyethylene foam
Weber, H.; Geißler, A.
Conference Paper
1990The relation of amyloidosis to social stress induced by crowding in the Syrian hamster (Mesocricetus auratus)
Germann, P.-G.; Kohler, M.; Ernst, H.; Baumgart, H.; Mohr, U.
Journal Article
1990Zum Einfluß mechanischer Belastungen auf die Dichtigkeit von metallisierten Kunststoffolien und Aluminiumfolienverbunden mit Kuststoffen. Eine vergleichende Studie
Probst, C.; Schricker, G.; Teichmann, W.
Journal Article
1989Determination of stresses, strains, and crack characterizing parameters.
Schmitt, W.; Kordisch, H.
Conference Paper
1989Development of a tilt measuring device for planar impact experiments
Winkler, W.-D.
Conference Proceedings
1989Dynamic material properties of a closed-cell polyethylene foamed plastic
Weber, H.; Geißler, A.
Conference Paper
1989Micromechanics of fracture under static and fatigue loading. Optical interferometry of crack tip craze zones
Könczöl, L.; Döll, W.
Book Article
1988Characterization of hardening depth by Barkhausen noise measurement
Bach, G.; Goebbels, K.; Theiner, W.A.
Journal Article
1988Implementation of models for stress-reduced oxidation into 2-D simulator
Seidl, A.; Huber, V.; Rudan, M.; Selberherr, S.; Stippel, H.; Strasser, E.; Lorenz, E.
Conference Paper
1986Schadfaktor und Stress? Elektromagnetischer Smog. Frequenzganganalyse am Koniferen-Nadelkollektiv
Hommel, H.
Journal Article
1985Elektromagnetischer SMOG - Schadfaktor oder Stress? Hochfrequenz-Messverfahren zur Frueherkennung von Waldschaeden
Hommel, H.
Book Article
1985Elektromagnetischer SMOG - Schadfaktor und Streß? Frequenzganganalyse am Koniferen-Nadelkollektiv
Hommel, H.
Journal Article
1985EMV von Biosystemen - Mensch, Tier, Pflanze. Überlegungen zur elektromagnetischen Verträglichkeit, EMV
Hommel, H.
Journal Article
1982Hydrogen content and mechanical stress in glow discharge amorphous silicon
Paduschek, P.; Eichinger, P.; Kristen, G.; Mitlehner, H.
Journal Article