Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2019Simulation of Sintering across Scales
Raether, Friedrich; Seifert, Gerhard; Ziebold, Heiko
Journal Article
2018Modeling inherently homogeneous sintering processes
Raether, Friedrich; Seifert, Gerhard
Journal Article
2017Generative Fertigung von Sinterglaskörpern für Glasdurchführungen durch 3D-Drucken
Nicolai, Katja
: Rädlein, Edda (Akademischer Betreuer); Michaelis, Alexander (Gutachter); Bergmann, Jean Pierre (Gutachter)
Dissertation
2017The influence of sintering additives on the microstructure and material properties of silicon nitride ceramics investigated by advanced simulation tools
Brockmann, Dorothea E.R.; Staab, Torsten E.M.; Raether, Friedrich
Journal Article
2017Sintering nickel and iron: Are there indications for defect-activated sintering?
Staab, Torsten E.M.; Helm, R.; Diegeler, Andreas
Conference Paper
2016Energieeffiziente Herstellung von C/C-SiC-Bauteilen mittels induktiv beheiztem modularem Schnellsintersystem
Konschak, Alexander; Mahr, J.; Schulte, Rüdiger; Schmidt, Jens
Journal Article
2016Equipment, material and processes for UV-DLP-based additive manufacturing of two-component ceramic green bodies and dense structures
Springer, Patrick; Schwarzer, Eric; Refle, Oliver; Richter, Hans-Jürgen
Conference Paper
2016FAST/Flash eröffnet neue Perspektiven für die industrielle Anwendung des feldunterstützten Sinterns
Hennicke, Jürgen; Herrmann, Mathias; Kessel, Tobias; Räthel, Jan
Journal Article
2016Gefügeausbildung und Eigenschaften von nanoskaligen binderfreien Hartmetallen
Pötschke, Johannes
: Michaelis, Alexander (Hrsg.)
Dissertation
2016Herstellung, Modifizierung und Charakterisierung von borcarbidbasierten Keramiken als Thermoelektrikum
Feng, Bing
: Michaelis, Alexander (Gutachter); Lippmann, Wolfgang (Gutachter); Kieback, Bernd
Dissertation
2016Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten
Rasp, Tobias
Dissertation
2016Predictive numerical simulation of the sintering behavior of ceramic components based on kinetic field and FE methods
Ziebold, Heiko
Abstract
2015Correlation between anisotropic green microstructure of spherical-shaped alumina particles and their shrinkage behavior
Fu, Z.W.; Polfer, P.; Kraft, T.; Roosen, A.
Journal Article, Conference Paper
2015Herstellung und Eigenschaften niedriglegierter Mn, Si, Cr Sinterstähle
Marquardt, Axel
: Kieback, Bernd (Gutachter); Weiß, Andreas (Gutachter); Leyens, Christoph (Betreuer)
Dissertation
2015Thermo-optical-measurement device for sintering of pm products under atmospheric control
Staab, Torsten E.M.; Diegeler, Andreas
Conference Paper
2014Effect of cobalt doping on the sintering mechanisms of the lead-free piezoceramic (Bi0.5Na0.5)TiO3
Schmitt, Veronika; Raether, Friedrich
Journal Article
2014Effect of dopants on the local atomic structure and sintering behavior of bismuth sodium titanate
Schmitt, Veronika
Dissertation
2013Energieeffizienz bei der Keramikherstellung
Raether, Friedrich; Kuballa, Susanne
Report
2013Generative Fertigung mit Kunststoffen
: Breuninger, Jannis (Mitarb.); Becker, Ralf (Mitarb.); Wolf, Andreas (Mitarb.); Rommel, Steve (Mitarb.); Verl, Alexander (Mitarb.)
Book
2012Correct constructional design - methods and rules
Breuninger, Jannis
Conference Paper
2011Controlling crystallization and sintering of alpha-Al2O3-YAG fibers by atmospheric conditions
Krüger, R.; Löbmann, P.
Journal Article
2010Cosintering of powder injection molding parts made from ultrafine WC-Co and 316L stainless steel powders for fabrication of novel composite structures
Simchi, A.; Petzoldt, F.
Journal Article
2010Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites
Uddin, Sheikh Minhaz; Mahmud, Tanvir; Wolf, Christoph; Glanz, Carsten; Kolaric, Ivica; Volkmer, Christoph; Höller, Helmut; Wienecke, Ulrich; Roth, Siegmar; Fecht, Hans-Jörg
Journal Article
2010Metal matrix composites with CNTs - processing, challenges and possibilities
Addinall, Raphael; Glanz, Carsten; Mahmud, Tanvir; Kolaric, Ivica
Conference Paper
2010Power semiconductor joining through sintering of Ag-nanoparticles: Analysis of suitability of different powders using DSC and TGA measurements
Knörr, M.; Schletz, A.; Oertel, S.; Jank, M.
Conference Paper
2010Power semiconductor joining through sintering of silver nanoparticles: Evaluation of influence of parameters time, temperature and pressure on density, strength and reliability
Knörr, M.; Schletz, A.
Conference Paper
2009Kupfer-PCM-Verbundwerkstoffe für Anwendungen im Bereich des thermischen Managements
Kalinichenka, S.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Nickel-based foams for exhaust after treatment components
Walther, G.; Klöden, B.; Büttner, T.; Kieback, B.; Weißgärber, T.; Böhm, A.; Stender, I.; Naumann, D.
Conference Paper
2009Optimierung tribologischer und mechanischer Eigenschaften von PM-Verbundwerkstoffen auf Aluminiumbasis
Walther, G.; Schubert, T.
Conference Paper
2008Advanced copper-based composites filled with phase-change materials for new thermal-management applications
Weißgärber, T.; Weidmüller, H.; Kalinichenka, S.; Kieback, B.
Conference Paper
2008Computertomografie zur Qualitätssicherung im Produktentstehungsprozess
Kroll, Julia; Refle, Oliver; Becker, Ralf
Conference Paper
2008Innovativer Regionaler Wachstumskern InnoZellMet
Kostmann, C.
Report
2008InnoZellMet - Verbundprojekt 3 - CASMEDUM - Chemisch aktive Strukturen für die Medizin- und Umwelttechnik, Teilprojekt: "Entwicklung von Sintermethoden für Faserstrukturen und Verfahren der Oberflächenbehandlung"
Kieback, B.; Morgenthal, I.
Report
2008Laser assisted machining of aluminium composite reinforced by SiC particle
Kawalec, M.; Przestacki, D.; Bartkowiak, K.; Jankowiak, M.
Conference Paper
2008Liquid phase assisted hot pressing of boron suboxide-materials
Andrews, A.; Herrmann, M.; Shabalala, T.C.; Sigalas, I.
Journal Article
2007Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P.; Levy, G.; Klocke, F.; Childs, T.H.C.
Conference Paper
2007Development and investigation of SiC-based thermal spray powders with alumina-yttria binder matrix
Wielage, B.; Grund, T.; Nebelung, M.; Thiele, S.; Wank, A.; Schwenk, A.
Conference Paper
2007Extrusion of copper based MIM-feedstocks for miniature heat pipes
Aumund-Kopp, C.; Petzoldt, F.; Schlitt, R.
Conference Paper
2007Laser sintering of alumina slurries
Klocke, F.; Derichs, C.; Ader, C.
Conference Paper
2007Manufacturing of ceramic-metal composites using multi-component injection moulding
Baumann, A.; Moritz, T.; Lenk, R.
Conference Paper
2007Net-shape processing of NiTi alloys by micro metal injection moulding (micro-MIM)
Imgrund, P.; Rota, A.; Schmidt, H.; Capretti, G.
Conference Paper
2007Processing, properties and coating of micro-porous syntactic foams
Weise, Jörg; Zanetti-Bueckmann, Vitor; Yezerska, Olga; Schneider, Michael; Haesche, Marco
Journal Article
2007Stahl-Keramik-Verbunde über Mehrkomponentenpulverspritzguss
Baumann, A.; Moritz, T.; Lenk, R.
Journal Article
2007Steel-ceramic compounds by multi-component injection moulding
Baumann, A.; Moritz, T.; Lenk, R.
Journal Article
2007Synthesis and properties of open-celled metal foams
Quadbeck, P.; Stephani, G.; Kümmel, K.; Adler, J.; Standke, G.
Conference Paper
2007Transparent armour ceramics: Spinel vs. Sub-µm Al2O3
Krell, A.; Hutzler, T.; Klimke, J.
Conference Paper
2007Werkstofftrends: Spark Plasma Sintering
Reschke, S.; Kohlhoff, J.; Notthoff, C.
Journal Article
2006Herstellung von partikelverstärkten Verbundwerkstoffen mit Titan- Matrix durch Kurzzeitsinterung
Schmidt, J.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2006Laser- und Plasma-Pulver-Auftragschweißen zur Erzeugung hartmetallähnlicher Schichten auf TiC-Basis
Techel, A.; Berger, L.-M.; Bretschneider, J.
Journal Article
2006Simulation von Prozessfolgen mit der Diskrete-Elemente-Methode
Riedel, H.; Wonisch, A.; Bierwisch, C.; Kraft, T.; Moseler, M.
Conference Paper
2005Novel methods for in-situ characterisation and simulation of processes during sintering of hardmetals
Gestrich, T.; Leitner, G.; Jaenicke-Rößler, K.
Conference Paper
2005Simulation von Rissbildung und Verzug in der Mikroelektronik
Kraft, T.; Riedel, H.; Schwanke, D.; Müller, E.
Journal Article
2005Thermal analysis of materials, components and processes with a high capacity macro-thermobalance
Gestrich, T.; Jaenicke-Rößler, K.; Leitner, G.; Peschka, C.
Conference Paper
2004Direct typing - a new method for the production of cellular P/M parts
Andersen, O.; Studnitzky, T.; Bauer, J.
Conference Paper
2004Exceeding the limitations in E-Manufacturing
Tolksdorf, D.; Köhnlein, M.
Conference Paper
2004Möglichkeiten und Grenzen thermodynamischer Modellierung von Nichtoxidkeramiken
Herrmann, M.; Can, A.; Ihle, J.; Hermel, W.
Conference Paper
2004Properties of binderless hardmetal densified by SinterHIP, hot pressing and SPS
Richter, V.; Holke, R.; Ruthendorf, M. von; Schmidt, J.; Grin, Y.
Conference Paper
2004Sintern
Riedel, H.
Journal Article
2004Sintern von Hartmetallen - Thermoanalytische Simulation
Leitner, G.; Gestrich, T.; Jaenicke-Rößler, K.
Conference Paper
2003Design for roling contact fatigue
Lipp, K.; Hoffmann, G.
Journal Article
2003Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H.
Journal Article
2000Hochfeste Sinterstähle
Lipp, Klaus; Sonsino, Cetin Morris
Report
2000Lasersintern von Korund-Beschichtungen auf Stahl
Krell, A.; Ma, H.-W.; Exner, H.; Nagel, A.-M.; Nieher, M.
Conference Paper
1999Direktes selektives Laser Sintern einkomponentiger metallischer Werkstoffe
Meiners, W.
Dissertation
1999Phasengleichgewichte und Korngrenzenphasen für Siliciumnitrid-Keramiken im System Nd-Si-Al-O-N
Kaiser, A.; Telle, R.; Herrmann, M.; Richter, H.J.; Hermel, W.
Conference Paper
1998Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D.
Conference Paper
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Grain shape in sintered submicrometre alumina
Krell, A.; Obenaus, P.
Journal Article
1998Materials technology drives impeller design
Sonsino, C.M.
Journal Article
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Journal Article
1997A liquid phase sintering model
McHugh, P.E.; Riedel, H.
Journal Article
1997Structural development and properties of Si3N4-SiC composites from amorphous Si-C-N powder precursors
Tschernikova, E.; Neumann, A.; Boden, G.
Conference Paper
1997Technologie des selektiven Lasersinterns von Thermoplasten
Nöken, S.
: Klocke, F. (Prüfer)
Dissertation
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Conference Paper
1996Formgenaue und rißfreie Teile aus Hartmetall, Keramik und Sintermetall durch rechnerisch optimiertes Pressen und Sintern
Riedel, H.; Coube, O.; Gaebel, R.; McHugh, P.E.; Sun, D.-Z.; Svoboda, J.
Conference Paper
1996Grain size dependent residual microstresses in submicron Al2O3 and ZrO2
Krell, A.; Teresiak, A.; Schläfer, D.
Journal Article
1996The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina
Krell, A.; Blank, P.
Journal Article
1996A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R.
Journal Article
1996Numerische Simulation des Pressens und Sinterns in der Pulvertechnologie
Riedel, H.; Coube, O.; Gaebel, R.; Sun, D.-Z.
Conference Paper
1996Pressing and sintering in powder technology
Riedel, H.
Conference Paper
1996Selektives Lasersintern metallischer Werkstoffe. Verfahrensentwicklung zur Herstellung metallischer Prototypen
Song, Y.-A.
Dissertation
1995Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995The differnt roles of substoichiometry and transient liquid phase on sintering of ZrO2/TiC with TiH2
Krell, A.; Blank, P.
Conference Paper
1995Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas
Book Article
1995Mechanisches Verhalten beim Sintern - Diffusionsmodelle und Verifikation an ZrO2
Zipse, H.
Book
1995Sintered alumina - hard and strong like hot-pressed Al2O3/TiC-composites
Krell, A.; Blank, P.
Conference Paper
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 1. Computation of equilibrium surfaces
Svoboda, J.; Riedel, H.; Zipse, H.
Journal Article
1994Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 2. Diffusional densification and creep
Riedel, H.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Conference Paper
1994Sintering and microstructure of Si3N4-materials
Hermel, W.; Herrmann, M.; Schulz, I.
Conference Paper
1993Constitutive equations for the mechanical behavior of powder compacts during sintering
Riedel, H.; Svoboda, J.; Zipse, H.; Gäbel, R.
Conference Paper
1993Densification microstructure and properties of Si3N4-TI-C,N-composites
Herrmann, M.; Balzer, B.; Schubert, C.; Hermel, W.
Journal Article
1993Densification, microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Millers, T.; Rendtel, A.; Reich, T.; Boden, G.; Schubert, C.
Conference Paper
1993Have the limits of the development of Beta-Si3N4-materials already been reached?
Hermel, W.; Herrmann, M.; Schubert, C.
Conference Paper
1993Microstructure, mechanical properties and wear of Si3N4/TiN composites
Herrmann, M.; Beger, A.; Schubert, C.; Hermel, W.; Meißner, E.; Ziegler, G.
Conference Paper
1993Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Conference Paper
1993Pore formation during reactive sintering of extruded titanium - aluminium powder mixtures
Dahms, M.; Leitner, G.; Poeßnecker, W.; Schultrich, S.; Schmelzer, F.
Journal Article
1993Redistribution of the liquid phase during sintering of silicon nitride
Herrmann, M.; Boberski, C.; Michael, G.; Putzky, G.; Hermel, W.
Journal Article
1993A theoretical study of grain growth in porous solids during sintering
Riedel, H.; Svoboda, J.
Journal Article
1993TiC-strengthened Al2O3 by powder tailoring and doping procedures
Krell, A.; Blank, P.
Journal Article
1993Wieder- und Weiterverwertung
Steinhilper, R.
Book Article
1992Einfluß von Zersetzungsreaktionen auf die Verdichtung von Si3N4
Herrmann, M.; Putzky, G.; Siegel, S.; Hermel, W.
Journal Article
1992Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R.
Conference Paper
1992Pore-boundary interactions and evolution equations for the porosity and the grain size during sintering
Svoboda, J.; Riedel, H.
Journal Article
1992Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z.
Conference Paper
1991Nanokristalline Materialien
Kunze, H.-D.
Journal Article
1991Simulation of pressing and sintering of powders.
Sun, D.-Z.; Hennies, M.; Riedel, H.
Conference Proceedings
1990A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H.
Conference Paper
1990Schwingfestigkeit von Verschraubungen aus Sinterwerkstoffen mit unterschiedlicher Bruchfestigkeit und Wärmebehandlung
Lipp, K.; Sonsino, C.M.
Report
1989Einfluß sintertechnischer Grenzen für die Herstellung von schwingbeanspruchten Bauteilen aus Sinterstahl
Sonsino, C.M.
Report
1985Mechanik von Schwingbruechen an gegossenen und gesinterten Konstruktionswerkstoffen unter mehrachsiger Beanspruchung
Grubisic, V.; Sonsino, C.M.
Journal Article
1984Optimierung von Fertigungsprozessen und Fertigungsfolgen
 
Journal Article