| | |
|---|
| 2020 | Impact of precrystallized NaYSi4O12 powders in the synthesis of sodium conducting solid electrolytes
Wagner, Dörte; Schilm, Jochen; Lee, Chang Woo; Kusnezoff, Mihails | Journal Article |
| 2020 | Intense pulsed light in back end processing of solar cells with passivating contacts based on amorphous or polycrystalline silicon layers
Schube, J.; Tutsch, L.; Fellmeth, T.; Feldmann, F.; Weil, M.; Harter, A.; Polzin, J.-I.; Bivour, M.; Keding, R.; Glunz, S.W. | Journal Article |
| 2019 | Impact of sintering temperature on permeation and long-term development of support structure and stability for asymmetric oxygen transporting BSCF membranes
Hoffmann, Robert; Pippardt, Ute; Kriegel, Ralf | Journal Article |
| 2019 | The influence on sintering and properties of sodium niobate (NaNbO3) ceramics by "non-stoichiometric" precursor compositions
Ruf, Thomas; Mauck, Markus; Megnin, Christof; Winkler, Markus; Hillebrecht, Harald; Hanemann, Thomas | Journal Article |
| 2019 | Intense Pulsed Light Meets the Metallization of Silicon Heterojunction Solar Cells
Schube, J.; Weil, M.; Fellmeth, T.; Keding, R.; Glunz, S.W. | Presentation |
| 2019 | Interaction of fiber matrix bonding in SiC/SiC ceramic matrix composites
Schönfeld, Katrin; Klemm, Hagen | Journal Article |
| 2018 | Additive Manufacturing of Stainless Steel/Zirconia Ceramic Composite Parts by Fused Filament Fabrication and Sintering
Godlinski, Dirk; Müller, Y.; Hein, Sebastian Boris | Conference Paper |
| 2018 | Applicability of photonic sintering and autoclaving as alternative contact formation methods for silicon solar cells with passivating contacts
Schube, J.; Fellmeth, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W. | Conference Paper |
| 2018 | A continuum model for sintering processes incorporating elasticity effects
Stark, Sebastian; Neumeister, Peter | Journal Article |
| 2018 | Low-Resistivity Screen-Printed Contacts on Indium Tin Oxide Layers for Silicon Solar Cells with Passivating Contacts
Schube, J.; Tutsch, L.; Fellmeth, T.; Bivour, M.; Feldmann, F.; Hatt, T.; Maier, F.; Keding, R.; Clement, F.; Glunz, S.W. | Journal Article |
| 2018 | Power Interconnect Trends - Cost Savings for PCB Power Electronics by Enabling Wear Out
Schletz, Andreas | Presentation |
| 2018 | Studying the progress of sintering in ferrous powder compacts by in-situ measuring the thermal conductivity
Danninger, Herbert; Leitner, Gert; Gierl-Mayer, Christian | Journal Article |
| 2018 | Thermal behaviour of cermets and hardmetals during debinding and sintering
Gestrich, Tim; Kaiser, Arno; Pötschke, Johannes; Meinl, Juliane; Höhn, Sören | Journal Article |
| 2017 | Highest UV-vis transparency of MgAl2O4 spinel ceramics prepared by hot pressing with LiF
Wätzig, Katja; Hutzler, Thomas | Journal Article |
| 2017 | Implementierung eines Sintermodells in ANSYS
Stark, Sebastian; Neumeister, Peter | Presentation |
| 2017 | Laser-based functionalization of electronic multi-material-layers for embedded sensors
Vedder, Christian; Wollgarten, Susanne; Gradmann, Rena; Stollenwerk, Jochen Hugo; Wissenbach, Konrad; Eberstein, Markus | Journal Article |
| 2017 | Microstructural evolution during sintering of cermets studied using interrupted sintering experiments and novel 2D and 3D FESEM based techniques
Pötschke, Johannes; Höhn, Sören; Richter, Volkmar; Mayer, Markus | Journal Article |
| 2017 | Pressureless sintering of ZrC with variable stoichiometry
Schönfeld, Katrin; Martin, Hans-Peter; Michaelis, Alexander | Journal Article |
| 2016 | The effect of sodium on the structure-activity relationships of cobalt-modified Cu/ZnO/Al2O3 catalysts applied in the hydrogenation of carbon monoxide to higher alcohols
Anton, Johan; Nebel, Janine; Song, Huiqing; Froese, Christian; Weide, Philipp; Ruland, Holger; Muhler, Martin; Kaluza, Stefan | Journal Article |
| 2016 | Formation of secondary borides in liquid phase-sintered B6O materials
Thiele, Maik; Herrmann, Mathias; Müller, Christin; Michaelis, Alexander | Journal Article |
| 2015 | Fundamentals of sintering nanoscaled binderless hardmetals
Pötschke, Johannes; Richter, Volkmar; Michaelis, Alexander | Journal Article, Conference Paper |
| 2014 | Grain growth during sintering of tungsten carbide ceramics
Poetschke, Johannes; Richter, Volkmar; Gestrich, Tim; Michaelis, Alexander | Journal Article |
| 2014 | Nanometallic silver inks for metallization of ITO-coated silicon solar cells. Influence of organic components
Gautrein, A.; Schmiga, C.; Glatthaar, M.; Tremel, W.; Glunz, S.W. | Conference Paper |
| 2014 | Non-destructive evaluation of 3D microstructure evolution during sintering of strontium titanate
Gumbsch, P.; Syha, M.; Lödermann, B.; Trenkle, A.; Graff, A. | Conference Paper, Journal Article |
| 2013 | Anisotropy and inhomogeneity measurement of the transport properties of spark plasma sintered thermoelectric materials
Jacquot, A.; Rull, M.; Moure, A.; Fernandez-Lozano, J.F.; Martin-Gonzalez, M.; Saleemi, M.; Toprak, M.S.; Muhammed, M.; Jaegle, M. | Journal Article, Conference Paper |
| 2013 | Comparative study of the sintering kinetic of alumina by kinetic field of response, master curve and thermokinetic
Neher, R.; Gestrich, T.; Klimke, J.; Herrmann, M. | Journal Article |
| 2013 | Correlation between microstructure and electrical resistivity of hexagonal boron nitride ceramics
Steinborn, C.; Herrmann, M.; Keitel, U.; Schönecker, A.; Räthel, J.; Rafaja, D.; Eichler, J. | Journal Article |
| 2013 | Development of thermal spray coating solution for ceramic substrates
Toma, Filofteia-Laura; Berger, Lutz-Michael; Hoffmann, Thomas; Scheitz, Stefan; Thiele, Sven; Fries, Manfred | Conference Paper |
| 2013 | Discrete element method sintering simulation
Wonisch, A.; Rasp, T.; Kraft, T.; Riedel, H. | Book Article |
| 2013 | Discrete element study on the influence of initial coordination numbers on sintering behaviour
Rasp, T.; Kraft, T.; Riedel, H. | Journal Article |
| 2013 | FAST/SPS - principle, possibilities and applications
Räthel, Jan; Herrmann, Mathias; Beckert, Wieland; Schöne, Jakob | Presentation |
| 2013 | Influences of cation disorder in commercial spinel powders studied by 27Al MAS NMR on the sintering of transparent MgAl2O4 ceramics
Krell, Andreas; Brendler, Erica | Journal Article |
| 2013 | Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS)
Qiao, Z.; Räthel, J.; Berger, L.-M.; Herrmann, M. | Journal Article |
| 2013 | Liquid phase formation in the system AlN-Al2O3-Y2O3. Pt.I: Experimental investigations
Neher, R.; Herrmann, M.; Fabrichnaya, O.; Pavlyuchkov, D.; Seifert, H.J. | Journal Article |
| 2013 | Three dimensional X-ray diffraction contrast tomography reconstruction of polycrystalline strontium titanate during sintering and electron backscatter diffraction validation
Syha, M.; Reinheimer, W.; Loedermann, B.; Graff, A.; Trenkle, A.; Baeuer, M.; Weygand, D.; Ludwig, W.; Gumbsch, P. | Conference Paper |
| 2012 | Densification and properties of superhard B6O materials with cobalt additions
Johnson, O.T.; Sigalas, I.; Herrmann, M.; Kleebe, H.J. | Journal Article |
| 2012 | Diamond-ceramics composites - New materials for a wide range of challenging applications
Herrmann, M.; Matthey, B.; Höhn, S.; Kinski, I.; Rafaja, D.; Michaelis, A. | Journal Article |
| 2012 | FAST/SPS temperature distribution during heating ramp
Räthel, J.; Beckert, W.; Herrmann, M. | Presentation |
| 2012 | Influence of the structure of MgO·nAl2O3 spinel lattices on transparent ceramics processing and properties
Krell, Andreas; Waetzig, Katja; Klimke, Jens | Journal Article, Conference Paper |
| 2012 | Kinetics of rare earth incorporation and its role in densification and microstructure formation of alpha-Sialon
Herrmann, M.; Höhn, S.; Bales, A. | Conference Paper, Journal Article |
| 2012 | Material- und Energieeffizienz in der Porzellanindustrie - Grundlage für die Wettbewerbsfähigkeit der Branche
Rösler, G.; Rösler, J.; Schirmer, P.; Häusler, A.; Fischer, G. | Journal Article |
| 2012 | Pressure-assisted sintering of WC ceramics
Poetschke, J.; Richter, V.; Michaelis, A. | Abstract |
| 2012 | Silver processing in thick film technology for power electronics
Eberstein, M.; Feller, C.; Seuthe, T.; Ihle, M.; Ziesche, S.; Gora, F. | Conference Paper |
| 2012 | Towards highly conductive silver pastes for LTCC power electronics
Eberstein, M.; Kretzschmar, C.; Seuthe, T.; Marcinkowski, M.; Ihle, M.; Ziesche, S.; Partsch, U.; Gora, F. | Conference Paper |
| 2011 | Characterization of the materials synthesized by high pressure-high temperature treatment of a polymer derived t-BC2N ceramic
Matizamhuka, Wallace R.; Sigalas, Iakovos; Herrmann, Mathias; Dubronvinsky, Leonid; Dubrovinskaia, Natalia; Miyajima, Nobuyoshi; Mera, Gabriela; Riedel, Ralf | Journal Article |
| 2011 | Temperature distribution during FAST/SPS densification
Räthel, J.; Herrmann, M. | Presentation |
| 2010 | Micro-segregations in liquid phase sintered silicon carbide ceramics
Herrmann, M.; Neher, R.; Brandt, K.; Hoehn, S. | Journal Article |
| 2010 | Sintering and mechanical properties of AlMgB14 composite materials
Herrmann, Mathias; Bodkin, R.; Coville, N.J.; Sigalas, I.; Thiele, M. | Journal Article |
| 2009 | Liquid phase assisted densification of superhard B6O materials
Herrmann, M.; Raethel, J.; Bales, A.; Sempf, K.; Sigalas, I.; Hoehn, M. | Journal Article |
| 2009 | Robust LTCC/PZT sensor-actuator-module for aluminium die casting
Flössel, M.; Scheithauer, U.; Gebhardt, S.; Schönecker, A.; Michaelis, A. | Conference Paper |
| 2009 | Temperature distribution for electrically conductive and non-conductive materials during Field Assisted Sintering (FAST)
Räthel, J.; Herrmann, M.; Beckert, W. | Journal Article |
| 2009 | The wetting behaviour and reaction kinetics in diamond-silicon carbide systems
Mlungwane, K.; Sigalas, I.; Herrmann, M.; Rodriguez, M. | Journal Article |
| 2008 | "Snow flake" structures in silicon nitride ceramics - Reasons for large scale optical inhomogeneities
Herrmann, M.; Schulz, I.; Bales, A.; Sempf, K.; Hoehn, S. | Journal Article |
| 2008 | Discrete element simulations of constrained ceramic powder sintering
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H. | Journal Article |
| 2008 | Liquid phase assisted hot pressing of boron suboxide-materials
Andrews, A.; Herrmann, M.; Shabalala, T.C.; Sigalas, I. | Journal Article |
| 2008 | A new oxidation protection strategy for silicon carbide foams
Martin, H.-P.; Standke, G.; Adler, J. | Journal Article |
| 2007 | The AC conductivity of liquid-phase-sintered silicon carbide
Sauti, G.; Can, A.; McLachlan, D.S.; Herrmann, M. | Journal Article |
| 2007 | Discrete element modeling of anisotropy development during constrained sintering of alumina
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H. | Conference Paper |
| 2007 | Electrochemical corrosion of solid and liquid phase sintered silicon carbide in acidic and alkaline environments
Andrews, A.; Herrmann, M.; Sephton, M.; Machio, C.; Michaelis, A. | Journal Article |
| 2007 | PZT thick films for sensor and actuator applications
Gebhardt, S.; Seffner, L.; Schlenkrich, F.; Schönecker, A. | Journal Article, Conference Paper |
| 2007 | Simulations of the influence of rearrangement during sintering
Henrich, B.; Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H. | Journal Article |
| 2007 | Stress-induced anisotropy of sintering alumina: Discrete element modelling and experiments
Wonisch, A.; Guillon, O.; Kraft, T.; Moseler, M.; Riedel, H.; Rödel, J. | Journal Article |
| 2006 | Anisotropic liquid phase sintering investigated by means of micromechanical and discrete element modeling
Wonisch, A.; Korn, K.; Kraft, T.; Riedel, H. | Conference Paper |
| 2006 | Densification of liquid phase sintered silicon carbide
Can, A.; Herrmann, M.; McLachlan, D.S.; Sigalas, I.; Adler, J. | Journal Article |
| 2006 | Effects of the homogeneity of particle coordination on solid-state sintering of transparent alumina
Krell, A.; Klimke, J. | Journal Article |
| 2006 | The influence of porosity on the electrical properties of liquid-phase sintered silicon carbide
Ihle, J.; Martin, H.-P.; Herrmann, M.; Obenaus, P.; Adler, J.; Hermel, W.; Michaelis, A. | Journal Article |
| 2006 | Multi-scale simulations of rearrangement effects and anisotropic behavior during sintering
Wonisch, A.; Kraft, T.; Riedel, H. | Conference Paper |
| 2005 | Alloying and sintering behaviour of selected iron-graphite-master alloy powder mixtures
Castro Pinto, F.; Sarasola, M.; Baumgaertner, F.; Dougan, M.; Mitchell, S.; Lipp, K.; Bender, H.; Coffin, C.; Dunkley, J. | Conference Paper |
| 2005 | Computer simulation as a tool in PM material science and technology
Kraft, T.; Riedel, H.; Gumbsch, P. | Conference Paper |
| 2005 | Modelling and simulation of processing steps in powder technology using particle dynamics
Kraft, T.; Henrich, B.; Bierwisch, C.; Moseler, M.; Riedel, H. | Conference Paper |
| 2004 | Comments on "Spark Plasma Sintering of Ceramics"
Krell, A.; Bruggen, M.P.B. van | Journal Article |
| 2004 | Finite element simulation of cold isostatic pressing and sintering of SiC components
Reiterer, M.; Kraft, T.; Janosovits, U.; Riedel, H. | Journal Article |
| 2004 | Manufacturing of a gear wheel made from reaction bonded alumina - numerical simulation of the sinterforming process
Reiterer, M.; Kraft, T.; Riedel, H. | Conference Paper, Journal Article |
| 2004 | Numerical simulation of solid state sintering
Kraft, T.; Riedl, H. | Journal Article |
| 2003 | Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H. | Journal Article |
| 2003 | Transparent sintered sub-mum Al2O3 with IR transmissivity equal to sapphire
Krell, A.; Baur, G.M.; Dähne, C. | Conference Paper |
| 2002 | Numerical simulation of die compaction and sintering
Kraft, T.; Riedel, H. | Journal Article |
| 2001 | Colour of gas-pressure-sintered silicon nitride ceramics. Part 1 : Experimental data
Herrmann, M.; Goeb, O. | Journal Article |
| 2001 | Colour of gas-pressure-sintered silicon nitride ceramics. Part 2 : Thermodynamic considerations
Herrmann, M.; Goeb, O. | Journal Article |
| 2001 | Processes during the Heat Treatment (Sintering) of WC-Co Compacts
Gestrich, T.; Leitner, G.; Jaenicke-Rößler, K. | Conference Paper |
| 2001 | Some new aspects of microstructural design of Beta-Si3N4 ceramics
Herrmann, M.; Schulz, I.; Hermel, W.; Schubert, C.; Wendt, A. | Journal Article |
| 1999 | Application of thermal analysis to material science
Leitner, G. | Journal Article |
| 1999 | Debinding and sintering of ceramics. Optimisation through thermoanalytical simulation
Leitner, G.; Jaenicke-Rößler, K.; Gestrich, T.; Breuning, T. | Journal Article |
| 1999 | Distortions and cracking of graded components during sintering
Riedel, H.; Kraft, T. | Conference Paper |
| 1999 | A new 0.4 mu m WC powder as well as powder-related properties and sintering behaviour of 0.6 to 30 mu m WC-Co hardmetals
Gille, G.; Szesny, B.; Leitner, G. | Journal Article |
| 1998 | Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D. | Conference Paper |
| 1998 | Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M. | Conference Paper |
| 1998 | Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M. | Conference Paper |
| 1998 | Grain shape in sintered submicrometre alumina
Krell, A.; Obenaus, P. | Journal Article |
| 1998 | Materials technology drives impeller design
Sonsino, C.M. | Journal Article |
| 1998 | PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H. | Journal Article |
| 1997 | Explosive Compaction of Nanosized TiN-Powders
Rabe, T.; Wäsche, R.; Prümmer, R. | Journal Article |
| 1997 | A liquid phase sintering model
McHugh, P.E.; Riedel, H. | Journal Article |
| 1996 | Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E. | Conference Paper |
| 1996 | The influence of shaping method on the grain size dependence of strength in dense submicrometre alumina
Krell, A.; Blank, P. | Journal Article |
| 1996 | A model for liquid phase sintering
Svoboda, J.; Riedel, H.; Gaebel, R. | Journal Article |
| 1996 | Pressing and sintering in powder technology
Riedel, H. | Conference Paper |
| 1995 | Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G. | Conference Paper |
| 1995 | The differnt roles of substoichiometry and transient liquid phase on sintering of ZrO2/TiC with TiH2
Krell, A.; Blank, P. | Conference Paper |
| 1995 | Fortschritte für Hochleistungs-Aluminiumoxid
Krell, Andreas | Book Article |
| 1995 | New in situ measuring methods for the optimization of sintering processes
Raether, F.; Müller, G. | Conference Paper |
| 1995 | New in situ measuring methods for the optimization of sintering processes
Raether, F.; Müller, G. | Journal Article |
| 1995 | Prediction of shape distortions of hard metal parts by numerical simulation of pressing and sintering
Sun, D.-Z.; Riedel, H. | Conference Paper |
| 1995 | Preparation and ferroelectric behaviour of PZT-fibres
Watzka, W.; Sporn, D.; Franke, K.; Scholz, H. | Conference Paper |
| 1995 | Sintered alumina - hard and strong like hot-pressed Al2O3/TiC-composites
Krell, A.; Blank, P. | Conference Paper |
| 1995 | Sintering ZrO2/TiC composites with TiH2. The role of transient liquid phase and of substoichiometry
Krell, A.; Blank, P.; Pippel, E.; Woltersdorf, J. | Journal Article |
| 1995 | Synthesis of Intermetallic Aluminides by Explosive Reaction Pressing
Prümmer, R.; Kochsiek, D.; Brunold, A. | Journal Article |
| 1994 | Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 1. Computation of equilibrium surfaces
Svoboda, J.; Riedel, H.; Zipse, H. | Journal Article |
| 1994 | Equilibrium pore surfaces, sintering stresses and constitutive equations for the intermediate and late stages of sintering. Part 2. Diffusional densification and creep
Riedel, H.; Svoboda, J.; Zipse, H. | Journal Article |
| 1994 | Microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Klemm, H.; Schubert, C.; Hermel, W.; Millers, T.; Rendtel, A. | Book Article |
| 1994 | Neue Keramische Werkstoffe
Krell, A.; Pippel, E.; Reetz, T.; Sorge, G.; Woltersdorf, J.
: Michalowsky, L.; Herrmann, M. | Book |
| 1994 | Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H. | Journal Article |
| 1994 | Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H. | Conference Paper |
| 1994 | Siliciumnitridwerkstoffe. Abschnitt 4.2.4.1
| Book Article |
| 1994 | Sintering and microstructure of Si3N4-materials
Hermel, W.; Herrmann, M.; Schulz, I. | Conference Paper |
| 1993 | Al2O3 and ZrO2 composites with high TiC contents fabricated by tailoring oxide powders.
Krell, A.; Blank, P. | Book Article |
| 1993 | Constitutive equations for the mechanical behavior of powder compacts during sintering
Riedel, H.; Svoboda, J.; Zipse, H.; Gäbel, R. | Conference Paper |
| 1993 | Densification microstructure and properties of Si3N4-TI-C,N-composites
Herrmann, M.; Balzer, B.; Schubert, C.; Hermel, W. | Journal Article |
| 1993 | Densification, microstructure and properties of SiCN-nanocomposites
Herrmann, M.; Millers, T.; Rendtel, A.; Reich, T.; Boden, G.; Schubert, C. | Conference Paper |
| 1993 | Have the limits of the development of Beta-Si3N4-materials already been reached?
Hermel, W.; Herrmann, M.; Schubert, C. | Conference Paper |
| 1993 | Microstructure, mechanical properties and wear of Si3N4/TiN composites
Herrmann, M.; Beger, A.; Schubert, C.; Hermel, W.; Meißner, E.; Ziegler, G. | Conference Paper |
| 1993 | Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H. | Conference Paper |
| 1993 | Redistribution of the liquid phase during sintering of silicon nitride
Herrmann, M.; Boberski, C.; Michael, G.; Putzky, G.; Hermel, W. | Journal Article |
| 1993 | A theoretical study of grain growth in porous solids during sintering
Riedel, H.; Svoboda, J. | Journal Article |
| 1993 | TiC-strengthened Al2O3 by powder tailoring and doping procedures
Krell, A.; Blank, P. | Journal Article |
| 1992 | Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R. | Conference Paper |
| 1992 | Pore-boundary interactions and evolution equations for the porosity and the grain size during sintering
Svoboda, J.; Riedel, H. | Journal Article |
| 1992 | Simulation of die pressing and sintering of powder metals, hard metals and ceramics
Riedel, H.; Sun, D.-Z. | Conference Paper |
| 1991 | AES and XPS investigations for the topochemical characterization of dope elements on WC powders
Baalmann, A.; Schlett, V. | Journal Article |
| 1991 | Simulation of pressing and sintering of powders.
Sun, D.-Z.; Hennies, M.; Riedel, H. | Conference Proceedings |
| 1990 | A constitutive model for the finite-element simulation of sintering - distortions and internal stresses.
Riedel, H. | Conference Paper |
| 1990 | Evaluation of different heat treatment methods for fatigue design of notched and differently loaded PM' parts
Esper, F.J.; Sonsino, C.M. | Conference Paper |
| 1990 | Fatigue design of sintered con-rods
Sonsino, C.M. | Report |
| 1990 | Influence of As-sintered material strength on the improvement of fatigue behaviour by surface rolling
Tengzelius, J.; Schlieper, G.; Sonsino, C.M. | Conference Paper |