Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.
2018Werkzeug- und Formenbau mittels additiver Fertigung
Müller, Bernhard; Gebauer, Mathias
Conference Paper
2017Silver/diamond composite material - powder metallurgical route and thermo-physical properties
Hutsch, T.; Schubert, T.; Weißgärber, T.; Kieback, B.
Conference Paper
2017Sintering nickel and iron: Are there indications for defect-activated sintering?
Staab, Torsten E.M.; Helm, R.; Diegeler, Andreas
Conference Paper
2017TFP reinforced metal - one way to increase the specific strength
Hutsch, T.; Aßmann, F.; Weißgärber, T.; Kieback, B.
Conference Paper
2016Transparent MgAl2O4/LiF ceramics by hot-pressing: Host-additive interaction mechanisms issue revisited
Goldstein, Adrian; Räthel, Jan; Katz, Michael; Berlin, Mila; Galun, Ehud
Journal Article
2015Thermo-optical-measurement device for sintering of pm products under atmospheric control
Staab, Torsten E.M.; Diegeler, Andreas
Conference Paper
2014Mechanical performance of structurally optimized AlSi7 aluminum foams – an experimental study
Lehmhus, Dirk; Busse, Matthias
Journal Article
2013Eröffnungsvortrag Pulvermetallurgie - Potenziale in der Medizintechnik
Schneider, Urs
Presentation
2012Neue Entwicklungen bei CVD-Verschleißschutzschichten für Hartmetallwerkzeuge
Endler, I.
Conference Paper
2009Advanced copper-PCM composites for thermal management applications
Weidmüller, H.; Kalinichenka, S.; Weißgärber, T.; Kieback, B.
Conference Paper
2009Mechanical behavior of nickel base foams for diesel particle filter applications
Duchamp, M.; Bartout, J.-D.; Forest, S.; Bienvenu, Y.; Walther, G.; Saberi, S.; Boehm, A.
Conference Paper
2009Optimierung tribologischer und mechanischer Eigenschaften von PM-Verbundwerkstoffen auf Aluminiumbasis
Walther, G.; Schubert, T.
Conference Paper
2009Progress in processing of shaped closed cell iron foam parts
Stöbener, K.; Rausch, G.; Busse, M.; Caballero, P.; Coleto, J.; Dorlencourt, S.; Macke-Bart, C.; Gavois, M.S.
Conference Paper
2009Pulvermetallurgische Technologien zur Herstellung nanostrukturierter Werkstoffe
Weißgärber, T.
Journal Article
2008Advanced copper-based composites filled with phase-change materials for new thermal-management applications
Weißgärber, T.; Weidmüller, H.; Kalinichenka, S.; Kieback, B.
Conference Paper
2008Aluminide protective coatings on steels by sintering of powder filled pastes
Veltl, G.; Drescher, C.; Petzoldt, F.; Busse, M.
Conference Paper
2008Dimensional behaviour of aluminium sintered in different atmospheres
Pieczonka, T.; Schubert, T.; Baunack, S.; Kieback, B.
Journal Article
2008Fatigue design
Lipp, K.
Conference Paper
2008Hochtemperaturbeständige Schäume auf Nickel-Basis für die Abgasnachbehandlung
Walther, G.; Klöden, B.; Büttner, T.; Weißgärber, T.; Kieback, B.; Böhm, A.; Stender, I.; Naumann, D.
Journal Article
2008Influence of carbide content and morphology on machinability of hardened PM high speed steels
Klocke, F.; Arntz, K.; Thejomurtula, R.
Conference Paper
2008Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Ciupinski, L.; Zielinski, W.; Michalski, A.; Weißgärber, T.; Kieback, B.
Journal Article
2008Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Trindade, B.; Weißgärber, T.; Kieback, B.
Conference Paper, Journal Article
2008Ionenstrahlpräparation - ein treffliches Werkzeug zur Charakterisierung der Zwischenprodukte des schmelzpulvermetallurgischen Aluminiumschäumverfahrens
Hohlfeld, J.; Lies, C.; Höhn, S.; Obenaus, P.
Journal Article
2008Micro metal injection moulding for thermal management applications using ultrafine powders
Schmidt, H.; Rota, A.C.; Imgrund, P.; Leers, M.
Conference Paper
2008Nanostructured high strength aluminium for automotive applications
Hummert, K; Schattevoy, R.; Broda, M.; Knappe, M.; Müller, R.; Beiss, P.; Klubberg, F.; Schubert, T.; Weißgärber, T.
Conference Paper
2008Neuartige Kupfer-PCM-Verbundwerkstoffe für Anwendungen im Bereich des thermischen Managements
Kalinichenka, S.; Weidmüller, H.; Weißgärber, T.; Kieback, B.
Journal Article
2008A new class of high temperature and corrosion resistant nickel-based open-cell foams
Walther, G.; Klöden, B.; Weißgärber, T.; Kieback, B.; Böhm, A.; Naumann, D.; Saberi, S.; Timberg, L.
Conference Paper
2008Production of titanium matrix composites reinforced with SiC particles
Poletti, C.; Balog, M.; Schubert, T.; Liedtke, V.; Edtmaier, C.
Journal Article
2008Rapid Manufacturing - Am Markt umgesetzte Verfahren und Prozessketten
Petzoldt, F.; Aumund-Kopp, C.; Uckelmann, I.
Conference Paper
2007Carbide formation in copper-carbon composites and its effect on thermal conductivity
Schubert, T.; Weidmueller, H.; Weißgärber, T.; Kieback, B.
Conference Paper
2007Evaluation of the fatigue behaviour of new PM-materials for highly loaded gears
Lipp, K.; Bender, H.J.; Baumgaertner, F.; Castro Pinto, F.; Sonsino, C.M.
Conference Paper
2007Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications
Schubert, T.; Brendel, A.; Schmid, K.; Koeck, T.; Ciupinski, L.; Zielinski, W.; Weißgärber, T.; Kieback, B.
Journal Article
2007Manufacturing of multi-functional micro parts by two-component metal injection moulding
Imgrund, P.; Rota, A.; Petzoldt, F.; Simchi, A.
Journal Article
2007Pulvermetallurgie
Reschke, S.
Journal Article
2007Pulvermetallurgie
Reschke, S.
Journal Article
2007Synthesis and properties of open-celled metal foams
Quadbeck, P.; Stephani, G.; Kümmel, K.; Adler, J.; Standke, G.
Conference Paper
2006Cu-based composites prepared by powder metallurgy for thermal management of electronic devices
Schubert, T.; Weißgärber, T.
Conference Paper
2006Herstellung und Anwendung von Metallschaumteilen im Fahrzeugbau
Baumeister, J.; Stöbener, K.; Rausch, G.
Conference Paper
2006Production of composite parts of H13 and 316L by two components injection molding
Carvalho, M.A.; Wendhausen, P.A.P.; Hartwig, T.
Conference Paper
2005Fatigue design of PM-gears under consideration of herzian pressure with sliding and tooth bending
Sonsino, C.; Lipp, K.
Conference Proceedings
2005Möglichkeit der Verarbeitung von Feinstpulvern
Nebelung, M.
Conference Paper
2005Thermal analysis of materials, components and processes with a high capacity macro-thermobalance
Gestrich, T.; Jaenicke-Rößler, K.; Leitner, G.; Peschka, C.
Conference Paper
2005Warmkompaktieren von Aluminiumpulvern - Mechanismen und Einfluss auf die Eigenschaften
Veltl, G.; Petzold, F.; Simchi, A.; Sonsino, C.M; Lipp, K.; Eksi, A.
Conference Paper
2005Werkstofftrends: Pulvermetallurgie
Reschke, S.; Kohlhoff, J.; Notthoff, C.; Kretschmer, T.
Journal Article
2004Direct typing - a new method for the production of cellular P/M parts
Andersen, O.; Studnitzky, T.; Bauer, J.
Conference Paper
2004Fatigue design principles for sintered steel components
Sonsino, C.M.
Conference Paper
2004Sintern von Hartmetallen - Thermoanalytische Simulation
Leitner, G.; Gestrich, T.; Jaenicke-Rößler, K.
Conference Paper
2004Von der Simulation zum Bauteilverhalten am Beispiel eines PM-Zahnrades
Lipp, K.; Sonsino, C.; Kraft, T.
Conference Paper
2003Design for roling contact fatigue
Lipp, K.; Hoffmann, G.
Journal Article
2003Fatigue design concepts for P/M parts and required material data
Sonsino, C.M.
Book
2003Parameters influencing the fatigue strength of PM Steel components
Sonsino, C.M.
Conference Proceedings
2003Processing techniques for functionally graded materials
Kieback, B.; Neubrand, A.; Riedel, H.
Journal Article
2003Untersuchung der Bildung und des Kollapses von Metallschäumen
Stanzick, H.
Dissertation
2003Untersuchungen zum selektiven Lasersintern von Metallen
Wagner, Christian Alois
Dissertation
2001Pulvermetallurgische Verfahrensentwicklung für miniaturisierte und mikrostrukturierte Bauteile
Rota, A.
Dissertation
2000Hochfeste Sinterstähle
Lipp, Klaus; Sonsino, Cetin Morris
Report
2000Novel metallic hollow sphere structures
Andersen, O.; Waag, U.; Schneider, L.; Stephani, G.; Kieback, B.
Journal Article
1999Betriebsbelastungen und Beanspruchungen für ein Auslegungskonzept neuer pulvermetallurgisch hergestellter Getriebekomponenten
Rupp, A.; Sonsino, C.M.
Conference Paper
1999Herstellung von Eisenschaum nach dem pulvermetallurgischen Treibmittelverfahren
Knüwer, M.
Dissertation
1999Kostenreduzierung durch nickelfreie Sinterstähle
Lipp, K.; Baum, U.
Conference Paper
1999Rolling contact fatigue properties of selected PM-materials for gear-box applications
Sonsino, C.M.; Lipp, K.
Report
1999Rolling contact fatigue. Component design and testing for P/M applications
Hoffmann, G.; Sonsino, C.M.; Michaelis, K.
Report
1998Development of corrosion. Fatigue resistant diffusion. Bonded pump impellers from stainless PM steels
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Sandritter, H.H.; Gonia, D.
Conference Paper
1998Development of diffusion - bonded pump impellers made from a corrosion - fatigue resistant PM' steel
Sonsino, C.M.; Zieschang, R.; Hofmann, B.; Molinari, A.; Sandritter, K.H.; Persson, M.
Report
1998Fatigue behaviour of sintered materials and components under operational service
Sonsino, C.M.
Conference Paper
1998Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1998Materials technology drives impeller design
Sonsino, C.M.
Journal Article
1998Molten Metal Atomization by Inert Gases
Brenn, G.; Raimann, J.; Wolf, G.; Domnick, J.; Durst, F.
Conference Paper
1998PM looks forward to pump impeller role
Sonsino, C.M.; Zieschang, R.; Arnhold, V.; Hofmann, B.; Gonia, D.; Sandritter, K.H.
Journal Article
1997Analyse der Prozeßkette Pulverspritzgießen
Merz, P.; Spur, G.
Dissertation
1997Competitive advantages by near-net-shape manufacturing. Papers presented at the Conference NNS '97
: Kunze, H.-D.
Conference Proceedings
1997Fatigue design. Testing, quality reliability and safety on the example of automotive PM' components
Sonsino, C.M.
Conference Paper
1997Oberflächenzerrüttung von Sinterstählen unter konstanter und veränderlicher Hertzscher Pressung mit überlagerter Reibung (Schlupf)
Lipp, Klaus
Dissertation
1997Simultaneous Engineering am Beispiel der Entwicklung von gesinterten Fahrzeugpleueln
Sonsino, C.M.; Hoffmann, E.; Arnhold, V.
Conference Paper
1997Untersuchungen zur Entwicklung eines Polymerbinders für das Pulverspritzgußverfahren und dessen Extraktion mit überkritischem Kohlendioxid
Merz, L.
Dissertation
1996Development of high-strength P/M steels with optimized microstructure by new alloying and sintering techniques
Brandt, U.; Sonsino, C.M.; Engström, U.; Ernst, E.; Hoffmann, E.
Conference Paper
1996Fatigue design of high loaded PM parts. Part 1
Sonsino, C.M.
Journal Article
1996Fatigue design of high loaded PM parts. Part 2
Sonsino, C.M.
Journal Article
1996How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Book Article
1996Numerische Simulation des Pressens und Sinterns in der Pulvertechnologie
Riedel, H.; Coube, O.; Gaebel, R.; Sun, D.-Z.
Conference Paper
1996Pressing and sintering in powder technology
Riedel, H.
Conference Paper
1995Binder design and process control for high performance MIM-materials
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Challenges for metal injection molding technology
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Dissolution processes and grain growth behaviour in a supersaturated nanocrystalline Ag-Cu alloy
Shen, H.; Günther, B.; Schäfer, H.; Li, Z.; Qi, Z.
Journal Article
1995Effect of compaction pressure on the microstructure of mechanically alloyed Ag37Cu63 alloy
Li, Z.Q.; Shen, H.; Li, Y.; Günther, B.
Journal Article
1995Grundlagen der Umformung kompressibler Werkstoffe
Lorenz, B.; Frobin, R.
Conference Paper
1995Influence of powder consolidation methods on the structural and thermal properties of a nanophase Cu-50wt%Ag alloy
Shen, H.; Li, Z.; Günther, B.; Korznikov, A.V.; Valiev, R.Z.
Journal Article
1995Neuere Entwicklungen beim Metallpulverspritzguß
Petzoldt, F.; Eifert, H.; Hartwig, T.; Veltl, G.
Conference Paper
1995Ultrafeine Pulver - Herstellung, Verarbeitung und Anwendungen
Günther, B.; König, T.; Meisel, R.L.
Conference Paper
1995Verfahren und Prozeßketten zur Fertigung metallischer Bauteile und Werkzeuge
Klocke, F.; Nöken, S.
Journal Article
1994Einfluß der Sinterzeit und -temperatur auf das Schwingfestigkeitsverhalten des diffusionslegierten Sinterstahls Fe-4.0 Prozent Ni-1.5 Prozent Cu-0.5 Prozent Mo plus 0.6 Prozent C.
Lindner, K.-H.; Sonsino, C.M.
Journal Article
1994Fatigue design for PM components. Manual for design and production engineers.
Esper, F.J.; Sonsino, C.M.
Book
1994Finite Element Simulation für HIP-Bauteile
Petzoldt, F.; Khazami-Zahdeh, M.
Book Article
1994Highly porous materials and parts by P/M technology
Kunze, H.D.; Hartwig, T.; Veltl, G.
Conference Paper
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Journal Article
1994How sintering time and temperature influence fatigue
Lindner, K.-H.; Sonsino, C.M.
Conference Paper
1994Investigation of binders for MIM of titanium
Kunze, H.-D.; Hartwig, T.; Veltl, G.
Conference Paper
1994New products made from ultrafine metal powders
Eifert, H.; Günther, B.
Conference Paper
1994Numerical simulation of die pressing and sintering - development of constitutive equations
Riedel, H.; Meyer, D.; Svoboda, J.; Zipse, H.
Journal Article
1994Numerical simulation of die pressing and sintering-development of constitutive equations
Riedel, H.; Svoboda, J.; Zipse, H.
Conference Paper
1994Schwingfestigkeit des diffusionslegierten Sinterstahls Fe-4.0%Ni-1.5%Cu-0.5%Mo+0.6%C in Abhängigkeit von der Sinterzeit und -Temperatur.
Sonsino, C.M.
Book
1993Mechanical alloying reduces wear of self-lubricating materials
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K.
Journal Article
1993Powder metallurgy on its way to nanocrystalline structures
Günther, B.; Kunze, H.-D.; Scholz, B.
Journal Article
1993Preparation and thermal stability of nanocrystalline Cu alloys
Günther, B.; Veltl, G.; Kunze, H.-D.
Journal Article
1993Preparation of nanocrystalline materials by PM methods
Günther, B.; Weiss, H.
Journal Article
1993Preparation of nanostructured materials by PM methods
Günther, B.
Conference Paper
1993Preparation of self-lubricating wear resistant materials by mechanical alloying
Günther, B.; Kunze, H.-D.; Veltl, G.; Takahashi, K.
Conference Paper
1993Preparation of wear resistant materials in the alloy system Ti-Al-B via the mechanical alloying technique
Günther, B.; Kunze, H.-D.; Veltl, G.; Yamada, Y.
Journal Article
1993Thermal stability of ultrafine grained and nanocrystalline metals
Kumpmann, A.; Günther, B.; Kunze, H.-D.
Conference Paper
1992Improvement of mechanical properties of diffusion- and prealloyed sintered steels by heat treatments.
Sonsino, C.M.; Schlieper, G.
Journal Article
1992Investigations of different stainless steel MIM feedstocks with a novel binder system
Petzoldt, F.; Veltl, G.; Kunze, H.-D.; Seidel, R.
Conference Paper
1991Mechanisches Verhalten von pulvermetallurgisch hergestellten Dampfleistungskomponenten aus 9-12% Cr-Stählen
Schumacher, G.; Franklin, C.J.; Torssell, K.; Hollstein, T.
Conference Paper
1991Nanokristalline Materialien
Kunze, H.-D.
Journal Article
1991Present level of knowledge on fatigue strength of sintered steels
Sonsino, C.M.
Conference Paper
1991Schwingfestigkeit von Verschraubungen aus Sinterwerkstoffen
Lipp, K.
Book
1990Development of sintered con-rods for automotive engines
Richter, K.; Lawcock, R.; Whittaker, D.; Schlieper, G.; Tengzelius, J.; Lipp, K.; Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Conference Paper
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1990Fatigue design for powder metallurgy
Sonsino, C.M.
Journal Article
1988Fatigue design of sintered connecting rods
Sonsino, C.M.
Journal Article
1988Herstellung amorpher Ni-Nb-Pulver durch mechanisches Legieren
Petzoldt, F.
Journal Article
1985Design criteria for PM parts submitted to fatigue
Sonsino, C.M.; Esper, F.J.; Leuze, G.
Book Article
1985Fatigue design of PM-automotive components.
Sonsino, C.M.; Huppmann, W.J.
Journal Article
1984Influence of homogeneity on the fatigue properties of sintered steels
Sonsino, C.M.; Schlieper, G.; Huppmann, W.J.
Journal Article
1984Methods to determine relevant material properties for the fatigue of powder metallurgy parts
Sonsino, C.M.
Journal Article
1982Dynamic compaction of powders
Pruemmer, R.
Book Article