| | |
|---|
| 2021 | Quantification of the carbon bonding state in amorphous carbon materials: A comparison between EELS and NEXAFS measurements
Mangolini, F.; Li, Z.; Marcus, M.A.; Schneider, R.; Dienwiebel, M. | Journal Article |
| 2021 | The role of lubricant and carbon surface in achieving ultra- and superlow friction
Weihnacht, Volker; Makowski, Stefan | Book Article |
| 2020 | Beeinflussen von Reibung und Verschleiß durch mikrostrukturierte Oberflächen
Franke, Volker; Pätzold, George; Klotzbach, Udo; Kuntze, Thomas | Journal Article |
| 2020 | Experimental and theoretical study of a magnetron DC-PECVD acetylene discharge
Fauroux, Antoine; Vandenabeele, Cédric; Pflug, Andreas; Lucas, Stéphane | Journal Article |
| 2019 | Material structure and piezoresistive properties of niobium containing diamond-like-carbon films
Grein, M.; Bandorf, R.; Schiffmann, K.; Bräuer, G. | Journal Article |
| 2019 | SIMS depth profile analysis of tribological coatings on curved surfaces
Schiffmann, K.I. | Journal Article |
| 2018 | DLC for medical-technical applications modified by electron beam
Gotzmann, Gaby; Beckmann, Jana; Schönfelder, Jessy; Wetzel, Christiane; Scholz, Burkhard; Herrmann, Ulrich | Conference Paper |
| 2018 | DLC-based duplex coatings for highly loaded forming tools
Weigel, K.; Mejauschek, M.; Kleinschmidt, M.; Bräuer, G. | Conference Paper |
| 2018 | Elektronenstrahlmodifizierung von diamantähnlichen Kohlenstoffschichten zur biofunktionalen Beschichtung von Implantatmaterialien
Gotzmann, Gaby | Dissertation |
| 2018 | Low-energy electron-beam modification of DLC coatings reduces cell count while maintaining biocompatibility
Gotzmann, G.; Beckmann, J.; Scholz, B.; Herrmann, U.; Wetzel, C. | Journal Article |
| 2018 | Reibung und Verschleiß von PTFE gegen unterschiedliche tribologische Beschichtungen
Waßmann, O.; Weigel, K.; Geitel, L.; Elzenheimer, N.T.; Rätz, D.; Brand, J.; Imad-Uddin Ahmed, S. | Journal Article |
| 2018 | Tribologie motorischer Spritzschichten unter dem Einfluss regenerativer Kraftstoffe
Scherge, M.; Winkler, H.-J.; Böttcher, R.; Dienwiebel, M. | Conference Paper |
| 2018 | Tribology of wire arc spray coatings under the influence of regenerative fuels
Böttcher, R; Winkler, H.-J.; Dienwiebel, M.; Scherge, M. | Journal Article |
| 2017 | Biocompatibility and inflammatory potential of titanium alloys cultivated with human osteoblasts, fibroblasts and macrophages
Markhoff, Jana; Krogull, Martin; Schulze, Christian; Rotsch, Christian; Hunger, Sandra; Bader, Rainer | Journal Article |
| 2017 | Electron-beam modification of DLC coatings for biomedical applications
Gotzmann, G.; Beckmann, J.; Wetzel, C.; Scholz, B.; Herrmann, U.; Neunzehn, J. | Journal Article |
| 2017 | Innenbeschichtete Rohre: Ein erfolgversprechender Lösungsansatz zur Verminderung von Foulingeffekten
Richter, Karsten; Müller, Roland; Landgrebe, Dirk; Stein, Christian; Bialuch, Ingmar; Bräuer, Günter; Siebeneck, Karl; Augustin, Wolfgang; Scholl, Stephan | Conference Paper |
| 2017 | Long-term stable surface modification of DLC coatings
Gotzmann, Gaby | Journal Article |
| 2016 | New microfluidic functionalities by nano- and micro-patterned moulds
Edelmann, Jan; Eckert, Udo; Groß, Stefan; Gründig, Bernd; Wedig, Heiko; Usov, Victor; O'Hara, Neal; Scanlan, Declan; Cross, Graham | Conference Paper |
| 2016 | Scratch resistance of superhard carbon coatings - a new approach to failure and adhesion evaluation
Zawischa, Martin; Makowski, Stefan; Schwarzer, N.; Weihnacht, Volker | Journal Article, Conference Paper |
| 2016 | Structure and friction properties of laser-patterned amorphous carbon films
Komlenok, Maksim Sergeevich; Arutyunyan, Natalia R.; Kononenko, Vitali Victorovich; Zavedeev, Evgeny V.; Frolov, Vadim D.; Chouprik, Anastasia A.; Baturin, Andrey S.; Scheibe, Hans-Joachim; Pimenov, Sergei M. | Journal Article, Conference Paper |
| 2016 | Tribological investigation of silicon-modified DLC coatings for the dry forming of aluminium alloys
Abraham, T.; Bräuer, G.; Kretz, F.; Groche, P. | Conference Paper |
| 2015 | Beschichtung contra Fouling
Richter, Karsten; Müller, Roland; Landgrebe, Dirk; Stein, Christian; Bialuch, Ingmar; Bräuer, Günter; Siebeneck, Karl; Augustin, Wolfgang; Scholl, Stephan | Journal Article |
| 2014 | Surface passivation and boundary lubrication of self-mated tetrahedral amorphous carbon asperities under extreme tribological conditions
Romero, A.P.; Pastewka, L.; Lautz, J.; Moseler, M. | Journal Article |
| 2014 | Tribologisches Verhalten von festschmierstoffgeschmierten thermisch gespritzten Titanoxidschichten im Trockenlauf
Rempp, A.; Killinger, A.; Brand, P.-J.; Gadow, R. | Journal Article |
| 2014 | Ultra-low friction of biodiesel lubricated ta-C coatings
Makowski, Stefan; Weihnacht, Volker; Schaller, Frank; Leson, Andreas | Journal Article |
| 2013 | Characterisation of the friction and wear behaviour of textile reinforced polymer composites in contact with diamond-like carbon layers
Andrich, M.; Hufenbach, W.; Kunze, K.; Scheibe, H.-J. | Journal Article |
| 2013 | Diesel lubricated ta-C coatings
Makowski, Stefan; Weihnacht, Volker; Leson, Andreas | Journal Article |
| 2013 | Diesel-lubricated ta-C coatings
Makowski, S.; Weihnacht, V.; Leson, A. | Journal Article |
| 2013 | From DLC to Si-DLC based layer systems with optimized properties for tribological applications
Hofmann, D.; Kunkel, S.; Bewilogua, K.; Wittorf, R. | Journal Article, Conference Paper |
| 2013 | Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy
Schmid, C.; Maier, V.; Schaufler, J.; Butz, B.; Spiecker, E.; Meier, S.; Göken, M.; Durst, K. | Conference Paper, Journal Article |
| 2013 | A mesoscopic model for the wear in tetrahedral amorphous carbon under shear
Lautz, J. von; Pastewka, L.; Moseler, M.; Gola, M. | Abstract |
| 2011 | Effect of the carbon ion energy on the microstructure of ta-C/Cr multilayers
Ratayski, U.; Rafaja, D.; Klemm, V.; Mühle, U.; Leonhardt, M.; Scheibe, H.-J. | Journal Article, Conference Paper |
| 2011 | High rate deposition of hard a-C:H films using microwave excited plasma enhanced CVD
Günther, M.; Bialuch, I.; Peter, S.; Bewilogua, K.; Richter, F. | Journal Article |
| 2009 | New materials for sputtered strain gauges
Heckmann, U.; Bandorf, R.; Gerdes, H.; Lübke, M.; Schnabel, S.; Bräuer, G. | Journal Article, Conference Paper |
| 2009 | Werkstofftrends: Werkstoffe der Mikrosystemtechnik
Weimert, B.; Reschke, S.; Kohlhoff, J.; Grüne, M. | Journal Article |
| 2008 | Anwendungsnahe Charakterisierung von ta-C-Schichten
Makowski, S. | Thesis |
| 2008 | Kunststoffbeschichtung mit DLC
Gemetz, F.; Meier, S. | Journal Article |
| 2008 | Schichtentwicklung für die schmiermittelfreie Umformung von hochfesten Aluminiumwerkstoffen
Wielage, B.; Wank, A.; Rupprecht, C.; Schmidt, G.; Stark, S. | Journal Article |
| 2008 | Werkstofftrends: Amorphe Kohlenstoffschichten
Kohlhoff, J.; Reschke, S.; Grüne, M. | Journal Article |
| 2007 | Deposition of in situ surface structured DLC-coatings
Meier, S.; König, M.; Hormann, C. | Conference Paper, Journal Article |
| 2006 | Beschichtungen für keramische Gleitlager und Gleitringdichtungen
Kailer, A.; Blug, B. | Journal Article |
| 2006 | DLC based coatings for tribological applications
Bewilogua, K.; Bialuch, I.; Brand, J.; Keunecke, M.; Ruske, H.; Thomsen, H.; Weber, M.; Wittorf, R. | Conference Paper |
| 2006 | Mikrotribologische Untersuchungen dünner Schichten unter Anwendung rastersondenbasierter Verfahren
Küster, R. | Dissertation |
| 2006 | New methods of surface engineering in forming tools development
Leopold, J.; Schmidt, G.; Beier, D.; Stark, S.; Wank, A.; Rupprecht, C. | Conference Paper |
| 2004 | Boron based and other combination tool coatings - characterization and application tests
Keunecke, M.; Wiemann, E.; Weber, M.; Thomsen, H.; Wittorf, R. | Conference Paper |
| 2004 | Einfluss der Temperatur auf das tribologische Verhalten von DLC-Schichten
Klaffke, D.; Hartelt, M.; Brand, J.; Brand, C.; Wittorf, R. | Journal Article |
| 2004 | Reibungs und Verschleißverhalten von a-C:H-Schichten unter mediengeschmierten Bedingungen
Klaffke, D.; Hartelt, M.; Brand, J.; Brand, C.; Wittorf, R. | Journal Article |
| 2001 | PLD of hard ceramic coatings
Perera, Y.; Gottmann, J.; Husmann, A.; Klotzbücher, T.; Kreutz, E.W.; Poprawe, R. | Conference Paper |
| 2001 | Pulsed laser deposition (PLD) of diamond-like carbon (DLC) thin film on Polymethylmethacrylate (PMMA) and tool steels
Perera, Y.; Schlaghecken, G.; Gottmann, J.; Klotzbücher, T.; Kreutz, E.W.; Poprawe, R. | Journal Article |
| 2000 | Harte Kohlenstoffschichten für tribologische Anwendungen
Brand, J.; Schäfer, L. | Conference Paper |
| 2000 | Tribologie
Reschke, S. | Journal Article |
| 1999 | Hard coatings on thermochemical pre-treated soft steels application potential for ball valves
Vetter, J.; Michler, T.; Steuernagel, H. | Journal Article |
| 1998 | DLC films deposited by bipolar pulsed DC PACVD
Michler, T.; Grischke, M.; Traus, I.; Bewilogua, K.; Dimigen, H. | Conference Paper |
| 1998 | Mechanical properties of DLC films prepared by bipolar pulsed DC PACVD
Michler, T.; Grischke, M.; Traus, I.; Bewilogua, K.; Dimigen, H. | Journal Article |
| 1998 | Variation of the wettability of DLC-coatings by network modification using silicon and oxygen
Grischke, M.; Hieke, A.; Morgenweck, F.; Dimigen, H. | Journal Article, Conference Paper |
| 1997 | Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K. | Conference Paper |
| 1997 | Beschichtungen zur Verminderung der Umweltbelastung bei Umformprozessen
Taube, K.; Straehler, B. | Conference Paper |
| 1994 | Eigenspannungen und E-Modul von DLC-Schichten und ihr Bezug zur Struktur und dem Abscheideprozeß
Schultrich, B.; Grandremy, G.; Schneider, D.; Scheibe, H.J. | Conference Paper |