Doulgkeroglou, M.-N.; Nubila, A. di; Niessing, B.; König, N.; Schmitt, R.H.; Damen, J.; Szilvassy, S.J.; Chang, W.; Csontos, L.; Louis, S.; Kugelmeier, P.; Ronfard, V.; Bayon, Y.; Zeugolis, D.I.:
Automation, Monitoring, and Standardization of Cell Product Manufacturing
In: Frontiers in Bioengineering and Biotechnology, Vol.8 (2020), Art. 811, 12 pp.
Egri, P.; Csáji, B.C.; Kis, K.B.; Monostori, L.; Váncza, J.; Ochs, J.; Jung, S.; König, N.; Schmitt, R.; Brecher, C.; Pieske, S.; Wein, S.:
Bio-inspired control of automated stem cell production
(Conference on Intelligent Computation in Manufacturing Engineering (ICME) <13, 2019, Gulf of Naples>)
In: Procedia CIRP, Vol.88 (2020), pp.600-605
Miehe, Robert; Bauernhansl, Thomas; Beckett, Marc; Brecher, Christian; Demmer, Axel; Drossel, Welf-Guntram; Elfert, Patrick; Full, Johannes; Hellmich, Arvid; Hinxlage, Julian; Horbelt, Jessica; Jutz, G.; Krieg, S.; Maufroy, Christophe; Noack, Marian; Sauer, Alexander; Schließmann, Ursula; Scholz, Paul; Schwarz, Oliver; Ten Hompel, Michael; Wrycza, Philipp; Wolperdinger, Markus:
The biological transformation of industrial manufacturing - Technologies, status and scenarios for a sustainable future of the German manufacturing industry
In: Journal of manufacturing systems, Vol.54 (2020), pp.50-61
urn:nbn:de:0011-n-5696356
Krziminski, Carolin; Kammann, Sebastian; Hansmann, Jan; Edenhofer, Frank; Dandekar, Gudrun; Walles, Heike; Leistner, Marcus:
Development of a bioreactor system for pre-endothelialized cardiac patch generation with enhanced viscoelastic properties by combined collagen I compression and stromal cell culture
In: Journal of tissue engineering and regenerative medicine, (2020), Online First, 40 pp.
Min, S.-H.; Lee, T.H.; Lee, G.-Y.; Zontar, D.; Brecher, C.; Ahn, S.-H.:
Directly printed low-cost nanoparticle sensor for vibration measurement during milling process
In: Materials, Vol.13 (2020), No.13, Art. 2920, 12 pp.
Augspurger, T.; Schraknepper, D.; Bergs, T.:
Experimental investigation of specific cutting forces and estimation of the heat partitioning under increasing tool wear in machining nickel-based super alloy IN 718
In: Production Engineering. Research and development, Vol.14 (2020), No.4, pp.491-498
Amin Hosseini, S.M.; Schäkel, Martin; Baran, Ismet; Janssen, Henning; Drongelen, Martin van; Akkerman, Remko:
A new global kinematic-optical-thermal process model for laser-assisted tape winding with an application to helical-wound pressure vessel
In: Materials and design, Vol.193 (2020), Art. 108854, 15 pp.
Gipperich, Marius; Riepe, Jan; Arntz, Kristian; Bergs, Thoms:
Pulsed Laser Influence on Temperature Distribution during Dual Beam Laser Metal Deposition
In: Metals, Vol.10 (2020), No.6, Art. 766, 11 pp.
Vu, A.T.; Grunwald, T.; Bergs, T.:
Thermo-viscoelastic modeling of nonequilibrium material behavior of glass in nonisothermal glass molding
(International Conference on Material Forming (ESAFORM) <23, 2020, Online>)
In: Procedia manufacturing, Vol.47 (2020), pp.1561-1568
Brecher, C.; Emonts, M.; Striet, P.; Voell, A.; Stollenwerk, J.; Janssen, H.:
Adaptive tape placement process control at geometrically changing substrates
(Conference on Composite Material Parts Manufacturing (CCMPM) <2, 2019, Sheffield>)
In: Procedia CIRP, Vol.85 (2019), pp.207-211
Schuh, Günther; Vogt, Florian; Maurer, Dennis:
Context-Specific Influencing Factors within a Transfer of Innovation from Corporate Incubators
In: International Journal of Engineering Research and Technology : IJERT, Vol.8 (2019), No.10, pp.488-497
Wilms, Marcel; Bergs, Thomas; Arntz, Kristian; Johannsen, Lars; Strassburg, Simon:
Development of a decision logic for the selection of a flexible robotic system for the automated manufacturing in tooling
(Conference on Manufacturing Systems (CMS) <52, 2019, Ljubljana>)
In: Procedia CIRP, Vol.81 (2019), pp.435-440
Schulz, Malena; Janssen, Henning; Brecher, Christian:
A Digital Shadow for the Infrared-based Tape Laying Process of Tailored Blanks out of Thermoplastic Unidirectional Tape
(Conference on Composite Material Parts Manufacturing (CCMPM) <2, 2019, Sheffield>)
In: Procedia CIRP, Vol.85 (2019), pp.224-229
Brecher, Christian; Lee, Tae Hun; Tzanetos, Filippos; Zontar, Daniel:
Hybrid modeling of thermo-elastic behavior of a three-axis machining center using integral deformation sensors
(Conference on Manufacturing Systems (CMS) <52, 2019, Ljubljana>)
In: Procedia CIRP, Vol.81 (2019), pp.1301-1306
Zhou, Beiyan; Chikkala, Jayaaditya; Schmitt, Robert:
A load-adaptive and predictive control of energy-efficient building automation in production environment
(Conference on Intelligent Computation in Manufacturing Engineering (ICME) <12, 2018, Ischia>)
In: Procedia CIRP, Vol.79 (2019), pp.245-250
Prümmer, Marcel; Bergs, Thomas; Arntz, Kristian; Lürken, Christian:
Periphery evaluation for interlinked manufacturing systems in industrial tooling
(Conference on Manufacturing Systems (CMS) <52, 2019, Ljubljana>)
In: Procedia CIRP, Vol.81 (2019), pp.470-475
Heutmann, Timo; Schmitt, Robert:
Predictive control of a synchronized individual production
(Conference on Manufacturing Systems (CMS) <52, 2019, Ljubljana>)
In: Procedia CIRP, Vol.81 (2019), pp.69-74
Bergs, Thomas; Borrmann, J.P.; Schüler, Manuel; Herrig, Tim; Döring, J.-E.:
Pure waterjet controlled depth machining for stripping ceramic thermal barrier coatings on turbine blades
(Conference on Composite Material Parts Manufacturing (CCMPM) <2, 2019, Sheffield>)
In: Procedia CIRP, Vol.85 (2019), pp.261-265
Schäkel, Martin; Hosseini, S.M. Amin; Janssen, Henning; Baran, Ismet; Brecher, Christian:
Temperature analysis for the laser-assisted tape winding process of multi-layered composite pipes
(Conference on Composite Material Parts Manufacturing (CCMPM) <2, 2019, Sheffield>)
In: Procedia CIRP, Vol.85 (2019), pp.171-176
Harnisch, Emely; Venek, Tommy; Nohr, Svenja; König, Niels; Schmitt, Robert:
Temperature calculation in metal substrates during two-photon polymerization
In: Optical Materials Express, Vol.9 (2019), No.1, pp.269-284
Klocke, F.; Mohammadnejad, M.; Holsten, M.; Ehle, L.; Zeis, M.; Klink, A.:
A Comparative Study of Polarity-related Effects in Single Discharge EDM of Titanium and Iron Alloys
(Conference on Electro Physical and Chemical Machining <19, 2018, Bilbao>)
In: Procedia CIRP, Vol.68 (2018), pp.52-57
Jung, Sven; Ochs, Jelena; Kulik, Michael; König, Niels; Schmitt, Robert H.:
Highly modular and generic control software for adaptive cell processing on automated production platforms
(Conference on Manufacturing Systems (CMS) <51, 2018, Stockholm>)
In: Procedia CIRP, Vol.72 (2018), pp.1245-1250
Szipka, K.; Dax, P.; Archenti, A.; Degen, F.; Hedlind, M.:
Integration of machining system capability information into a CAx software environment for complex tool trajectory prediction
(Conference on Manufacturing Systems (CMS) <51, 2018, Stockholm>)
In: Procedia CIRP, Vol.72 (2018), pp.1239-1244
Klocke, F.; Mohammadnejad, M.; Zeis, M.; Klink, A.:
Investigation on the Variability of Existing Models for Simulation of Local Temperature Field during a Single Discharge for Electrical Discharge Machining (EDM)
(Conference on Electro Physical and Chemical Machining <19, 2018, Bilbao>)
In: Procedia CIRP, Vol.68 (2018), pp.260-265
Smyczek, G.; Rotshteyn, G.; Degen, F.; Bergs, T.:
Limits to simplified calculation of uncut chip thickness in milling
(Conference on High Performance Cutting (HPC) <8, 2018, Budapest>)
In: Procedia CIRP, Vol.77 (2018), pp.275-278
Klocke, F.; Schreiner, T.; Schüler, M.; Zeis, M.:
Material Removal Simulation for Abrasive Water Jet Milling
(Conference on Electro Physical and Chemical Machining <19, 2018, Bilbao>)
In: Procedia CIRP, Vol.68 (2018), pp.541-546
Brecher, C.; Behrens, J.; Klatte, M.; Lee, T.H.; Tzanetos, F.:
Measurement and analysis of thermo-elastic deviation of five-axis machine tool using dynamic R-test
(Conference on High Performance Cutting (HPC) <8, 2018, Budapest>)
In: Procedia CIRP, Vol.77 (2018), pp.521-524
Brecher, C.; Klatte, M.; Lee, T.H.; Tzanetos, F.:
Metrological analysis of a mechatronic system based on novel deformation sensors for thermal issues in machine tools
(Conference on High Performance Cutting (HPC) <8, 2018, Budapest>)
In: Procedia CIRP, Vol.77 (2018), pp.517-520
Klocke, F.; Harst, S.; Zeis, M.; Klink, A.:
Modeling and Simulation of the Microstructure Evolution of 42CrMo4 Steel during Electrochemical Machining
(Conference on Electro Physical and Chemical Machining <19, 2018, Bilbao>)
In: Procedia CIRP, Vol.68 (2018), pp.505-510
Klocke, F.; Heidemanns, L.; Zeis, M.; Klink, A.:
A Novel Modeling Approach for the Simulation of Precise Electrochemical Machining (PECM) with Pulsed Current and Oscillating Cathode
(Conference on Electro Physical and Chemical Machining <19, 2018, Bilbao>)
In: Procedia CIRP, Vol.68 (2018), pp.499-504
Liu, Fengwei; Wu, Yongqian; Wu, Fan; König, Niels; Schmitt, Robert; Wan, Yongjian; Xu, Yan:
Precise phase demodulation of single carrier-frequency interferogram by pixel-level Lissajous figure and ellipse fitting
In: Scientific Reports, Vol.8 (2018), Art. 148, 11 pp.
Klocke, Fritz; Dambon, Olaf; Bletek, Thomas; Höche, Thomas; Naumann, Falk; Hutzler, Thomas:
Surface integrity in ultra-precision grinding of transparent ceramics
(Conference on Surface Integrity (CSI) <4, 2018, Tianjin/China>)
In: Procedia CIRP, Vol.71 (2018), pp.177-180
Klink, Andreas; Arntz, Kristian; Johannsen, Lars; Holsten, Maximilian; Chrubasik, Lothar; Winands, Kai; Wollbrink, Moritz; Bletek, Thomas; Gerretz, Vincent; Bergs, Thomas:
Technology-based assessment of subtractive machining processes for mold manufacture
(Conference on Surface Integrity (CSI) <4, 2018, Tianjin/China>)
In: Procedia CIRP, Vol.71 (2018), pp.401-406
Baum, Christoph; Brecher, Christian; Klatte, Michel; Lee, Tae Hun; Tzanetos, Filippos:
Thermally induced volumetric error compensation by means of integral deformation sensors
(Conference on Manufacturing Systems (CMS) <51, 2018, Stockholm>)
In: Procedia CIRP, Vol.72 (2018), pp.1148-1153
Brecher, C.; Brozio, M.; Klatte, M.; Lee, T.H.; Tzanetos, F.:
Application of an unscented Kalman filter for modeling multiple types of machine tool errors
(Conference on Manufacturing Systems (CMS) <50, 2017, Taichung City, Taiwan>)
In: Procedia CIRP, Vol.63 (2017), pp.449-454
McBeth, Christine; Gutermuth, Angela; Ochs, Jelena; Sharon, Andre; Sauer-Budge, Alexis F.:
Automated tissue dissociation for rapid extraction of viable cells
(Conference on BioManufacturing (BioM) <3, 2017, Chicago/Ill.>)
In: Procedia CIRP, Vol.65 (2017), pp.88-92
Janssen, Henning; Peters, Tido; Brecher, Christian:
Efficient production of tailored structural thermoplastic composite parts by combining tape placement and 3d printing
(Conference on Composite Materials Parts Manufacturing (CCMPM) <1, 2017, Karlsruhe>)
In: Procedia CIRP, Vol.66 (2017), pp.91-95
Kukla, C.; Peters, T.; Janssen, H.; Brecher, C.:
Joining of thermoplastic tapes with metal alloys utilizing novel laser sources and enhanced process control in a tape placement process
(Conference on Composite Materials Parts Manufacturing (CCMPM) <1, 2017, Karlsruhe>)
In: Procedia CIRP, Vol.66 (2017), pp.85-90
Klocke, F.; Harst, S.; Karges, F.; Zeis, M.; Klink, A.:
Modeling of the electrochemical dissolution process for a two-phase material in a passivating electrolyte system
(Conference on Modelling of Machining Operations (CMMO) <16, 2017, Cluny>)
In: Procedia CIRP, Vol.58 (2017), pp.169-174
Klocke, Fritz; Schulz, Martin; Gräfe, Stefan:
Optimization of the laser hardening process by adapting the intensity distribution to generate a top-hat temperature distribution using freeform optics
In: Coatings, Vol.7 (2017), No.6, Art. 77, 16 pp.
Kulik, Michael; Ochs, Jelena; König, Niels; McBeth, Christine; Sauer-Budge, Alexis; Sharon, Andre; Schmitt, Robert:
Parallelization in automated stem cell culture
(Conference on BioManufacturing (BioM) <3, 2017, Chicago/Ill.>)
In: Procedia CIRP, Vol.65 (2017), pp.242-247
Klocke, Fritz; Arntz, Kristian; Teli, Mahesh; Winands, Kai; Wegener, Maximilian; Oliari, Stella:
State-of-the-art laser additive manufacturing for hot-work tool steels
(Conference on Manufacturing Systems (CMS) <50, 2017, Taichung City, Taiwan>)
In: Procedia CIRP, Vol.63 (2017), 58-63
Schuh, Günther; Lau, Felix; Kabasci, Patrick; Bachmann, Heidi:
Towards new success factors in technology intelligence evidence from a european benchmarking study
In: International Journal of Engineering Research and Technology : IJERT, Vol.6 (2017), No.12, pp.137-149
Schuh, Günther; Vogt, Florian; Lau, Felix; Bickendorf, Philipp:
Typing of innovations from corporate incubator
In: International Journal of Engineering Research and Technology : IJERT, Vol.6 (2017), No.12, pp.307-315
Schuh, Günther; Kramer, Linda:
Cybernetic approach for controlling technology management activities
(Conference on Manufacturing Systems (CMS) <48, 2015, Ischia>)
In: Procedia CIRP, Vol.41 (2016), pp.437-442
Ottersbach, Michael; Zhao, Wei:
Experimental investigations on the machinability of tungsten carbides in orthogonal cutting with diamond-coated tools
(Conference on High Performance Cutting (HPC) <7, 2016, Chemnitz>)
In: Procedia CIRP, Vol.46 (2016), pp.416–419
Stoeterau, Rodrigo Lima; Janssen, Andreas; Mallmann, Guilherme:
Friction analyses of dimple-structured surface
In: Journal of Mechanics Engineering and Automation. Online journal, Vol.6 (2016), No.6, pp.269-276
Schuh, Günther; Wölk, Sebastian; Faulhaber, Marcel:
Governance framework for the operation of focal-organized, self-financed research networks
In: International Journal of Engineering Research and Technology : IJERT, Vol.5 (2016), No.12, pp.244-254
Schenk, Friedrich; Brill, Nicolai; Marx, Ulrich; Hardt, Daniel; König, Niels; Schmitt, Robert:
High-speed microscopy of continuously moving cell culture vessels
In: Scientific Reports, Vol.6 (2016), Art. 34038, 9 pp.
Pickshaus, Tobias; Kandt, Alexandra; Hesse, Stephan; Fleischer, Karsten; Schmitt, Robert:
A holistic approach to risk oriented lifecycle engineering: Assessing lifecycle risks in early phases
(Conference Life Cycle Engineering (LCE) <23, 2016, Berlin>)
In: Procedia CIRP, Vol.48 (2016), pp.265–270
Brecher, Christian; Schmitt, Robert; Lindner, Florian; Peters, Tido; Emonts, Michael; Große Böckmann, Markus:
Increasing cost and eco efficiency for selective tape placement and forming by adaptive process design
(Conference on Manufacturing Systems (CMS) <49, 2016, Stuttgart>)
In: Procedia CIRP, Vol.57 (2016), pp.769-774
Kunze, Rouwen; Mallmann, Guilherme; Schmitt, Robert:
Inline plasma analysis as tool for process monitoring in laser micro machining for multi-layer materials
(International Conference on Laser Assisted Net Shape Engineering (LANE) <9, 2016, Fürth>)
In: Physics procedia, Vol.83 (2016), pp.1329-1338
Brummer, C.; Eck, S.; Marsoner, S.; Arntz, K.; Klocke, F.:
Laser-assisted metal spinning for an efficient and flexible processing of challenging materials
(International Conference on Materials, Processing and Product Engineering (MPPE) <1, 2015, Leoben>)
In: IOP conference series. Materials science and engineering, Vol.119 (2016), Art. 012022, 9 pp.
Prater, K.; Dukwen, J.; Scharf, T.; Herzig, H.P.; Plöger, S.; Hermerschmidt, A.:
Micro-structuring of glassy carbon for precision glass molding of binary diffractive optical elements
In: Optical Materials Express, Vol.6 (2016), No.11, pp.3407-3416
Schuh, Günther; Wölk, Sebastian:
Model for the network-specific design of the type-based governance of focal-organized, self-financed research networks: Conceptual research design
In: International Journal of Engineering Research and Technology : IJERT, Vol.5 (2016), No.12, pp.387-397
Cube, Johann Philipp von; Härtel, Lasse; Schmitt, Robert:
Model-based decision support in supply chains - requirements for monetary supply risk quantification
(Conference on Manufacturing Systems (CMS) <49, 2016, Stuttgart>)
In: Procedia CIRP, Vol.57 (2016), pp.171-176
Cube, Philipp von; Härtel, Lasse; Schmitt, Robert; Ponsard, Christophe; Massonet, Philippe; Landtsheer, Renaud de; Ospina, Gustavo; Printz, Stephan; Jeschke, Sabina:
Monetary quantification of supply risks of manufacturing enterprises - discrete event simulation based approach
(Conference on Manufacturing Systems (CMS) <49, 2016, Stuttgart>)
In: Procedia CIRP, Vol.57 (2016), pp.164-170
Kandt, Alexandra; Pickshaus, Tobias; Fleischer, Karsten; Schmitt, Robert:
A new model to ascertain product maturity in product development processes
(Design Conference <26, 2016, Stockholm>)
In: Procedia CIRP, Vol.50 (2016), pp.173-178
Arrizubieta, J.I.; Wegener, M.; Arntz, K.; Lamikiz, A.; Ruiz, J.E.:
Powder flux regulation in the laser material deposition process
(International Conference on Laser Assisted Net Shape Engineering (LANE) <9, 2016, Fürth>)
In: Physics procedia, Vol.83 (2016), pp.743-751
Permin, Eike; Bertelsmeier, Felix; Blum, Matthias; Bützler, Jennifer; Haag, Sebastian; Kuz, Sinem; Özdemir, Denis; Stemmler, Sebastian; Thombansen, Ulrich; Schmitt, Robert; Brecher, Christian; Schlick, Christopher; Abel, Dirk; Poprawe, Reinhart; Loosen, Peter; Schulz, Wolfgang; Schuh, Günther:
Self-optimizing production systems
(Conference on Manufacturing Systems (CMS) <48, 2015, Ischia>)
In: Procedia CIRP, Vol.41 (2016), pp.417-422
Schuh, Günther; Ryschka, Simon; Hysky, Lukas:
Systemizing the Requirements of Technology Platforms in Diversified Companies
In: International Journal of Engineering Research and Technology : IJERT, Vol.5 (2016), No.12, pp.276-285
Klocke, Fritz; Brecher, Christian; Löpenhaus, Christoph; Ganser, Philipp; Staudt, Julian; Krömer, Markus:
Technological and simulative analysis of power skiving
(Design Conference <26, 2016, Stockholm>)
In: Procedia CIRP, Vol.50 (2016), pp.773-778
Brecher, C.; Janssen, H.; Eckert, M.; Schmidt, F.:
Thermal investigation of interaction between high-power CW-laser radiation and a water-jet
(International Conference on Photonic Technologies <2016, Fürth>)
In: Physics procedia, Vol.83 (2016), pp.317-327
Bergs, Thomas; Richter, Volkmar; Ottersbach, Michael; Pötschke, Johannes; Hochmuth, Carsten; Busch, Katja:
Tool technologies for milling of hardmetals and ceramics
(Conference on High Performance Cutting (HPC) <7, 2016, Chemnitz>)
In: Procedia CIRP, Vol.46 (2016), pp.299-302
Bont, F. de; Brill, N.; Schmitt, R.; Tingart, M.; Rath, B.; Pufe, T.; Jahr, H.; Nebelung, S.:
Evaluation of single-impact-induced cartilage degeneration by optical coherence tomography
In: BioMed research international, (2015), Art.486794, 11 pp.
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.; Tasoulas, D.; Charalampous, P.; Kotsanis, T.; Kombogiannis, S.; Lemmer, O.:
Explanation of the wear behaviour of NCD coated carbide tools facilitated by appropriate methods for assessing the coating adhesion deterioration at elevated temperatures
In: Tribology in Industry, Vol.37 (2015), No.3, pp.309-319
Lindner, F.; Schmitt, R.:
Goal-oriented life cycle investigations for composite manufacturing chains
(Conference on Life Cycle Engineering <22, 2015, Sydney>)
In: Procedia CIRP, Vol.29 (2015), pp.438-443
Klocke, F.; Schmitt, R.; Arntz, K.; Grosse Böckmann, M.; Gasser, A.; Alkhayat, M.; Kerkhoff, J.; Klingbeil, N.; Vollmer, T.; Wegener, M.:
Investigation and assessment of resource consumption of process chains
(International Conference on Through-life Engineering Services (TESConf) <4, 2015, Cranfield>)
In: Procedia CIRP, Vol.38 (2015), pp.234–238
Heeschen, D.; Klocke, F.; Arntz, K.:
Life cycle oriented milling tool management in small scale production
(Conference on Life Cycle Engineering <22, 2015, Sydney>)
In: Procedia CIRP, Vol.29 (2015), pp.293–298
Brill, N.; Riedel, J.; Rath, B.; Tingart, M.; Jahr, H.; Betsch, M.; Quack, V.; Pufe, T.; Schmitt, R.; Nebelung, S.:
Optical coherence tomography-based parameterization and quantification of articular cartilage surface integrity
In: Biomedical optics express. Online journal, Vol.6 (2015), No.7, pp.2398-2411
Harnisch, E.; Russew, M.; Klein, J.; König, N.; Crailsheim, H.; Schmitt, R.:
Optimization of hybrid polymer materials for 2PP and fabrication of individually designed hybrid microoptical elements thereof
In: Optical Materials Express, Vol.5 (2015), No.2, pp.456-461
Wuthishuwong, C.; Traechtler, A.; Bruns, T.:
Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication
In: EURASIP journal on wireless communications and networking, (2015), Art. 33, 12 pp.
Klocke, Fritz; Schmitt, Robert; Zeis, Markus; Heidemanns, Lukas; Kerkhoff, Johannes; Heinen, Daniel; Klink, Andreas:
Technological and economical assessment of alternative process chains for blisk manufacture
(Machining Innovations Conference for Aerospace Industry (MIC) <15, 2015, Hannover>)
In: Procedia CIRP, Vol.35 (2015), pp.67-72
Arrizubieta, Jon Inaki; Klocke, Fritz; Gräfe, Stefan; Arntz, Kristian; Lamikiz, Aitzol:
Thermal simulation of laser-assisted turning
(Manufacturing Engineering Society (MESIC International Conference) <6, 2015, Barcelona>)
In: Procedia Engineering, Vol.132 (2015), pp.639-646
Damerow, U.; Borzykh, M.; Tabakajew, D.; Schaermann, W.; Homberg, W.; Trächtler, A.:
Analysis of high speed bending operations as basis for integrating self-correcting components to increase process reliability
(International Conference on Technology of Plasticity (ICTP) <11, 2014, Nagoya>)
In: Procedia Engineering, Vol.81 (2014), pp.831-836
Brunstein, F.; Schweers, C.; Trächtler, A.:
An automated approach to filter design for online state- and parameter estimation on unknown, non-analytic models
(International Conference on System-Integrated Intelligence - Challenges for Product and Production Engineering (SysInt) <2, 2014, Bremen>)
In: Procedia Technology, Vol.15 (2014), pp.73-83
Haag, S.; Zontar, D.; Schleupen, J.; Müller, T.; Brecher, C.:
Chain of refined perception in self-optimizing assembly of micro-optical systems
In: Journal of sensors and sensor systems : JSSS, Vol.3 (2014), No.1, pp.87-95
Damerow, U.; Tabakajew, D.; Borzykh, M.; Schaermann, W.; Homberg, W.; Trächtler, A.:
Concept for a self-correcting sheet metal bending operation
(International Conference on System-Integrated Intelligence - Challenges for Product and Production Engineering (SysInt) <2, 2014, Bremen>)
In: Procedia Technology, Vol.15 (2014), pp.439-446
Cube, J.P.; Schmitt, R.:
Execution of ramp-up projects in day-to-day operations through a quantitative risk management approach
(International Conference on Ramp-Up Management (ICRM) <2, 2014, Aachen>)
In: Procedia CIRP, Vol.20 (2014), Nr.26–31
Schuh, G.; Graw, M.; Schön, N.:
Exploitation-oriented manufacturing technology development
(Conference on Manufacturing Systems (CMS) <47, 2014, Windsor>)
In: Procedia CIRP, Vol.17 (2014), pp.680-685
Klocke, F.; Brummer, C.M.:
Laser-assisted metal spinning of challenging materials
(International Conference on Technology of Plasticity (ICTP) <11, 2014, Nagoya>)
In: Procedia Engineering, Vol.81 (2014), pp.2385-2390
Brecher, C.; Emonts, M.; Eckert, M.:
Laser-Assisted Sheet Metal Working by the Integration of Scanner System Technology into a Progressive Die
(International Conference on Laser Assisted Net Shape Engineering (LANE) <7, 2012, Fürth>)
In: Schmidt, M.: Laser Assisted Net Shape Engineering 7, LANE 2012: Furth, Germany 12 - 15 November 2012. Red Hook, NY: Curran, 2014. (Physics Procedia 39.2012), pp. 249-256
Anacker, H.; Dumitrescu, R.; Gausemeier, J.; Iwanek, P.; Schierbaum, T.:
Methodology for the identification of potentials for the integration of self-optimization in mechatronic systems
(International Conference on System-Integrated Intelligence - Challenges for Product and Production Engineering (SysInt) <2, 2014, Bremen>)
In: Procedia Technology, Vol.15 (2014), pp.17-26
Schuh, Günther; Rudolf, S.; Vogels, T.:
Performance measurement of modular product platforms
(Conference on Manufacturing Systems (CMS) <47, 2014, Windsor>)
In: Procedia CIRP, Vol.17 (2014), pp.266-271
Degen, F.; Klocke, F.; Bergs, T.:
Presentation of a novel “Simultaneous Three Axis Turning” process for time and cost efficient machining of rotational symmetric turbomachinery components
(Machining Innovations Conference (MIC) <5, 2014, Hannover>)
In: Procedia CIRP, Vol.24 (2014), pp.32-37
Brenner, Christian; Greenyer, Joel; Holtmann, Jörg; Liebel, Grischa; Stieglbauer, Gerald; Tichy, Matthias:
ScenarioTools Real-Time Play-Out for Test Sequence Validation in an Automotive Case Study
(International Workshop on Graph Transformation and Visual Modeling Techniques (GTVMT) <13, 2014, Grenoble>)
In: Electronic communications of the EASST. Online journal, Vol.67 (2014), 14 pp.
Schuh, Günther; Rudolf, S.; Riesener, M.:
Similarity-based product configuration
(Conference on Manufacturing Systems (CMS) <47, 2014, Windsor>)
In: Procedia CIRP, Vol.17 (2014), pp.290–295
Mahadhir, K.A.; Tan, S.C.; Low, C.Y.; Dumitrescu, R.; Amin, A.T.M.; Jaffar, A.:
Terrain classification for track-driven agricultural robots
(International Conference on System-Integrated Intelligence - Challenges for Product and Production Engineering (SysInt) <2, 2014, Bremen>)
In: Procedia Technology, Vol.15 (2014), pp.775-782
Schmitt, R.; Mallmann, G.; Winands, K.; Pothen, M.:
Automated process initialization of laser surface structuring processes by inline process metrology
(International Conference on Lasers in Manufacturing (LiM) <7, 2013, Munich>)
In: Physics procedia, Vol.41 (2013), pp.887-895
Marx, U.; Schenk, F.; Behrens, J.; Meyr, U.; Wanek, P.; Zang, W.; Schmitt, R.; Brüstle, O.; Zenke, M.; Klocke, F.:
Automatic production of induced pluripotent stem cells
(Conference on BioManufacturing (BioM) <1, 2013, Tokyo>)
In: Procedia CIRP, Vol.5 (2013), pp.2-6
Marx, Ulrich; Pickert, Diana; Heymer, Andrea; Schmitt, Robert:
Non-invasive quality control for production processes of artificial skin equivalents by optical coherence tomography
(Conference on BioManufacturing (BioM) <1, 2013, Tokyo>)
In: Procedia CIRP, Vol.5 (2013), pp.128-132
Bouzakis, K.D.; Paraskevopouloua, R.; Katirtzoglou, G.; Makrimallakis, S.; Bouzakis, E.; Charalampous, P.:
Prediction of coated tools performance in milling based on the film fatigue at different strain rates
In: Tribology in Industry, Vol.35 (2013), No.2, pp.104-112
Kalashnikov, M.; Choi, W.; Hunter, M.; Yu, C.-C.; Dasari, R.R.; Feld, M.S.:
Assessing the contribution of cell body and intracellular organelles to the backward light scattering
In: Optics Express, Vol.20 (2012), No.2, pp.816-826
Schmitt, R.; Mallmann, G.; Winands, K.; Pothen, M.:
Inline process metrology system for the control of laser surface structuring processes
(International Conference on Photonic Technologies <2012, Fürth>)
In: Physics procedia, Vol.39 (2012), pp.814-822
Brecher, C.; Emonts, M.; Eckert, M.:
Laser-assisted sheet metal working by the integration of scanner system technology into a progressive die
(International Conference on Laser Assisted Net Shape Engineering (LANE) <7, 2012, Fürth>)
In: Physics procedia, Vol.39 (2012), pp.249-256
Kappmeyer, G.; Hubig, C.; Hardy, M.; Witty, M.; Busch, M.:
Modern machining of advanced aerospace alloys-Enabler for quality and performance
(Conference on High Performance Cutting (HPC) <5, 2012, Zürich>)
In: Wegener, K.: 5th CIRP Conference on High Performance Cutting 2012: 4.-7. June 2012, Zürich; HPC 2012. Amsterdam: Elsevier, 2012. (Procedia CIRP 1.2012), pp. 28-43
Bielawny, D.; Bruns, T.; Loh, C.C.; Traechtler, A.:
Multi-robot approach for automation of an industrial profile lamination process
(International Symposium on Robotics and Intelligent Sensors (IRIS) <2012, Kuching>)
In: Procedia Engineering, Vol.41 (2012), pp.981-987
Low, C.Y.; Aziz, N.; Aldemir, M.; Mellado, M.; Dumitrescu, R.; Anacker, H.:
Principle solution for designing collaborative humanoid soccer robots
(International Symposium on Robotics and Intelligent Sensors (IRIS) <2012, Kuching>)
In: Procedia Engineering, Vol.41 (2012), pp.1507-1515
Bouzakis, K.-D.; Pappa, M.; Gerardis, S.; Skordaris, G.; Bouzakis, E.:
PVD coatings' strength properties at various temperatures by nanoindentations and FEM calculations determined
In: Tribology in Industry, Vol.34 (2012), No.1, pp.29-35
Klocke, F.; Brecher, C.; Wegener, M.; Heinen, D.; Fischer, B.; Do-Khac, D.:
Scanner-based laser cladding
(International Conference on Photonic Technologies <2012, Fürth>)
In: Physics procedia, Vol.39 (2012), pp.346-353
Klocke, Fritz; Arntz, Kristian; Cabral, Gustavo Francisco; Stolorz, Martin; Busch, Marc:
Characterization of tool wear in high-speed milling of hardened powder metallurgical steels
In: Advances in Tribology. Online journal, Vol.2 (2011), Art. 906481, 13 pp.
Frank, S.; Ungers, M.; Rolser, R.:
Coaxial control of aluminum and steel laser brazing processes
(International Conference on Lasers in Manufacturing (LIM) <6, 2011, München>)
In: Schmidt, M.: Lasers in Manufacturing 2011, Sixth International WLT Conference on Lasers in Manufacturing. Proceedings: May 23-26, 2011, München; LiM 2011. Amsterdam: Elsevier, 2011. (Physics Procedia 12.2011, Pt.1), pp. 752-760
Schuh, G.; Haag, C.:
How to prevent product piracy using a new TRIZ-based methodology
(ETRIA World TRIZ Future Conference <2010>)
In: Procedia Engineering, Vol.9 (2011), pp.391-401
Busch, M.; Klocke, F.; Bergs, T.; Rohde, L.; Witty, M.; Cabral, G.F.:
Integrated approach for a knowledge-based process layout for simultaneous 5-axis milling of advanced materials
In: Advances in Tribology. Online journal, (2011), Art. 742360
Brecher, C.; Emonts, M.; Rosen, C.-J.; Hermani, J.-P.:
Laser-assisted milling of advanced materials
(International Conference on Lasers in Manufacturing (LIM) <6, 2011, München>)
In: Schmidt, M.: Lasers in Manufacturing 2011, Sixth International WLT Conference on Lasers in Manufacturing. Proceedings: May 23-26, 2011, München; LiM 2011. Amsterdam: Elsevier, 2011. (Physics Procedia 12.2011, Pt.1), pp. 599-606
Brecher, C.; Emonts, M.; Eckert, M.:
Laser-assisted sheet metal working of high strength steels in serial production
(International Conference on Lasers in Manufacturing (LIM) <6, 2011, München>)
In: Schmidt, M.: Lasers in Manufacturing 2011, Sixth International WLT Conference on Lasers in Manufacturing. Proceedings: May 23-26, 2011, München; LiM 2011. Amsterdam: Elsevier, 2011. (Physics Procedia 12.2011, Pt.1), pp. 617-626
Schmitt, Robert; König, Niels; Zheng, Hanqing:
Machine integrated optical measurement of honed surfaces in presence of cooling lubricant
(International Conference on Metrology and Properties of Engineering Surfaces <13, 2011, London>)
In: Journal of physics. Conference series, Vol.311 (2011), No.1, Art. 012007, 5 pp.
Bouzakis, K.-D.; Skordaris, G.; Bouzakis, E.:
Methods for determining coating's strength properties changes after inducing plastic or elastic residual stresses
(Conference on Surface Integrity (CSI) <1, 2012, Bremen>)
In: Procedia Engineering, Vol.19 (2011), pp.34-39
Bouzakis, K.-D.; Tsouknidas, A.; Skordaris, G.; Bouzakis, E.; Makrimallakis, S.; Gerardis, S.; Katirtzoglou, G.:
Optimization of wet or dry microblasting on PVD films by various Al2O3 grain sizes for improving the coated tools' cutting performance
In: Tribology in Industry, Vol.33 (2011), No.2, pp.49-56
Yi, A.Y.; Tao, B.; Klocke, F.; Dambon, O.; Wang, F.:
Residual stresses in glass after molding and its influence on optical properties
(Conference on Surface Integrity (CSI) <1, 2012, Bremen>)
In: Procedia Engineering, Vol.19 (2011), pp.402-406
Schuh, G.; Haag, C.; Kreysa, J.:
TRIZ-based technology know-how protection - How to find protective mechanisms against product piracy with TRIZ
(ETRIA World TRIZ Future Conference <2010>)
In: Procedia Engineering, Vol.9 (2011), pp.611-619
Klocke, F.; Brecher, C.; Heinen, D.; Rosen, C.-J.; Breitbach, T.:
Flexible scanner-based laser surface treatment
(International Conference on Laser Assisted Net Shape Engineering (LANE) <6, 2010, Erlangen>)
In: Schmidt, M.: LANE 2010, 6th International Conference on Laser Assisted Net Shape Engineering. Proceedings. Pt.1: Erlangen, September 21-24, 2010. Amsterdam: Elsevier, 2010. (Physics Procedia 5.2010, Nr.1), pp. 467-475
Brecher, C.; Stimpfl, J.; Emonts, M.:
Intelligent CO2 beam guiding
(International Conference on Laser Assisted Net Shape Engineering (LANE) <6, 2010, Erlangen>)
In: Schmidt, M.: LANE 2010, 6th International Conference on Laser Assisted Net Shape Engineering. Proceedings. Pt.1: Erlangen, September 21-24, 2010. Amsterdam: Elsevier, 2010. (Physics Procedia 5.2010, Nr.1), pp. 157-166
Brecher, C.; Rosen, C.-J.; Emonts, M.:
Laser-assisted milling of advanced materials
(International Conference on Laser Assisted Net Shape Engineering (LANE) <6, 2010, Erlangen>)
In: Schmidt, M.: LANE 2010, 6th International Conference on Laser Assisted Net Shape Engineering. Proceedings. Pt.2: Erlangen, September 21-24, 2010. Amsterdam: Elsevier, 2010. (Physics Procedia 5.2010, Nr.2), pp. 259-272
Emonts, M.; Brecher, C.:
Laser-assisted shearing of stainless steel and spring steel plates with the use of a laser scanner system - new hybrid production technology for the sheet metal industry
(International Conference on Laser Assisted Net Shape Engineering (LANE) <6, 2010, Erlangen>)
In: Schmidt, M.: LANE 2010, 6th International Conference on Laser Assisted Net Shape Engineering. Proceedings. Pt.2: Erlangen, September 21-24, 2010. Amsterdam: Elsevier, 2010. (Physics Procedia 5.2010, Nr.2), pp. 273-283