Fraunhofer-Gesellschaft

YearTitle/AuthorDocument Type
2020Efficient abrasive water jet milling for near-net-shape fabrication of difficult-to-cut materials
Uhlmann, E.; Männel, C.; Braun, T.
Journal Article
Fulltext
2020On the feasibility of fan-out wafer-level packaging of capacitive micromachined ultrasound transducers (CMUT) by using inkjet-printed redistribution layers
Roshanghias, A.; Dreissigacker, M.; Scherf, C.; Bretthauer, C.; Rauter, L.; Zikulnig, J.; Braun, T.; Becker, K.-F.; Rzepka, S.; Schneider-Ramelow, M.
Journal Article
Fulltext
2020Simulation challenges of warpage for wafer- and panel level packaging
Dijk, M. van; Kuttler, S.; Rost, F.; Jeaschke, J.; Walter, H.; Wittler, O.; Braun, T.; Schneider-Ramelow, M.
Conference Paper
2019Deubiquitinase USP10 regulates Notch signaling in the endothelium
Lim, R.; Sugino, T.; Nolte, H.; Andrade, J.; Zimmermann, B.; Shi, C.; Doddaballapur, A.; Ong, Y.T.; Wilhelm, K.; Fasse, J.W.D.; Ernst, A.; Kaulich, M.; Husnjak, K.; Boettger, T.; Guenther, S.; Braun, T.; Krüger, M.; Benedito, R.; Dikic, I.; Potente, M.
Journal Article
2019Fan-Out Wafer and Panel Level Packaging as Packaging Platform for Heterogeneous Integration
Braun, T.; Becker, K.F.; Hoelck, O.; Voges, S.; Kahle, R.; Dreissigacker, M.; Schneider-Ramelow, M.
Journal Article
Fulltext
2019A numerical study on mitigation of flying dies in compression molding of microelectronic packages
Dreissigacker, M.; Hoelck, O.; Bauer, J.; Braun, T.; Becker, K.-F.; Schneider-Ramelow, M.; Lang, K.-D.
Journal Article
2019Piezo-plunger jetting technology: An experimental study on jetting characteristics of filled epoxy polymers
Kurz, A.; Bauer, J.; Wagner, M.
Journal Article
Fulltext
2019Where is the Sweet Spot for Panel Level Packaging?
Braun, T.; Becker, K.F.; Hölck, O.; Voges, S.; Wöhrmann, M.; Böttcher, L.; Töpper, M.; Stobbe, L.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.D.
Conference Paper
2018Can Bond Wires really be used as Antennas?
Ndip, I.; Becker, K.F.; Brandenburger, F.; Le, T.H.; Huhn, M.; Bauer, J.; Koch, M.; Hempel, M.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2018Challenges for Miniaturised Energy Harvesting Sensor Systems
Rusu, C.; Bader, S.; Oelmann, B.; Alvandpour, A.; Enoksson, P.; Braun, T.; Tiedke, S.; Dal Molin, R.; Ferin, G.; Torvinen, P.; Liljeholm, J.
Conference Paper
2018Delamination Detection in an Electronic Package by Means of a Newly Developed Delamination Chip Based on Thermal Pixel (Thixel) Array
Kumar, A.; Schulz, M.; Sheva, S.; Keller, J.; Bader, V.; Wöhrmann, M.; Bauer, J.; May, D.; Wunderle, B.
Conference Paper
2018Energy autarkic wireless sensor node for reliable long-term exposure to domestic waste water in a sewage system
Leverenz, E.; Becker, K.-F.; Koch, M.; Straube, S.; Pötter, H.; Lang, K.-D.
Conference Paper
2018Fan-out wafer level packaging for 5G and mm-Wave applications
Braun, Tanja; Becker, K.-F.; Hoelck, O.; Kahle, R.; Woehrmann, M.; Toepper, M.; Ndip, I.; Maass, U.; Tschoban, C.; Aschenbrenner, R.; Voges, S.; Lang, K.-D.
Conference Paper
2018High temperature encapsulation for smart power devices
Becker, K.-F.; Thomas, T.; Obst, M.; Bauer, J.; Braun, T.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2018A Novel Concept for Accelerated Stress Testing of Thermal Greases and In-situ Observation of Thermal Contact Degradation
Wunderle, B.; May, D.; Heilmann, J.; Arnold, J.; Hirscheider, J.; Li, Y.; Bauer, J.; Ras, M.A.
Conference Paper
2018Panel Level Packaging: A View Along the Process Chain
Braun, T.; Becker, K.-F.; Hölck, O.; Kahle, R.; Wöhrmann, M.; Böttcher, L.; Topper, M.; Stobbe, L.; Zedel, H.; Aschenbrenner, R.; Voges, S.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2018Recent developments in panel level packaging
Braun, T.; Billaud, M.; Zedel, H.; Stobbe, L.; Becker, K.-F.; Hoelck, O.; Wöhrmann, M.; Boettcher, L.; Töpper, M.; Aschenbrenner, R.; Voges, S.; Lang, K.-D.; Schneider-Ramelow, M.
Conference Paper
2018Ultra-thin 50 um fan-out wafer level package: Development of an innovative assembly and de-bonding concept
Woehrmann, Markus; Braun, T.; Toepper, M.; Lang, K.-D.
Conference Paper
2018Using fluidic simulation for parameter optimization in compression molding of microelectronic packages
Dreissigacker, M.; Hoelck, O.; Raatz, S.; Bauer, J.; Braun, T.; Becker, K.-F.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
20170.13-μm SiGe BiCMOS technology with More-than-Moore modules
Kaynak, M.; Wietstruck, M.; Göritz, A.; Wipf, S.T.; Inac, M.; Cetindogan, B.; Wipf, C.; Kaynak, C.B.; Wöhrmann, M.; Voges, S.; Braun, T.
Conference Paper
2017Development of a multi-project fan-out wafer level packaging platform
Braun, T.; Raatz, S.; Maass, U.; Dijk, M. van; Walter, H.; Hölck, O.; Becker, K.-F.; Töpper, M.; Aschenbrenner, R.; Wöhrmann, M.; Voges, S.; Huhn, M.; Lang, K.-D.; Wietstruck, M.; Scholz, R.F.; Mai, A.; Kaynak, M.
Conference Paper
2017Innovative excimer laser dual damascene process for ultra-fine line multi-layer routing with 10 µm pitch micro-vias for wafer level and panel level packaging
Woehrmann, M.; Hichri, H.; Gernhardt, R.; Hauck, K.; Braun, T.; Toepper, M.; Arendt, M.; Lang, K.-D.
Conference Paper
2017Modelling and characterisation of a grease pump-out test stand and its use for accelerated stress testing of thermal greases
Wunderle, B.; Heilmann, J.; May, D.; Arnold, J.; Hirscheider, J.; Bauer, J.; Schacht, R.; Vogel, J.; Ras, M.A.
Conference Paper
2017Trends in fan-out wafer and panel level packaging
Braun, T.; Becker, K.-F.; Wöhrmann, M.; Töpper, M.; Böttcher, L.; Aschenbrenner, R.; Lang, K.-D.
Conference Paper
2016Ageing phenomena in isotropic conductive adhesive material investigated by experimental and simulation techniques
Hölck, O.; Dijk, M. van; Bauer, J.; Walter, H.; Wittler, O.; Lang, K.-D.
Conference Paper
2016Broadband dielectric material characterization of epoxy molding compound
Huhn, M.; Tschoban, C.; Pötter, H.; Ndip, I.; Braun, T.; Lang, K.-D.
Conference Paper
2016Development of a sensor concept to in situ measure process data in a transfer mold process
Kahle, R.; Becker, K.-F.; Bauer, J.; Braun, T.; Thomas, T.; Lang, K.-D.
Conference Paper
2016Encapsulation of smart power electronic devices - Thermal degradation and dielectric behavior
Thomas, T.; Gineiger, S.; Becker, K.-F.; Georgi, L.; Lang, K.-D.
Conference Paper
2016Ensuring system reliability of a piezoelectric energy harvester
Wittler, O.; Hölck, O.; Benecke, S.; Dobs, T.; Dijk, M. van; Keller, J.; Schulz, M.; Bittner, P.; Schlosser, I.; Vergara, F.; Yacoub, T.; Bader, V.; Braun, T.; Lang, K.-D.
Conference Paper
2016Foldable fan-out wafer level packaging
Braun, T.; Becker, K.-F.; Raatz, S.; Minkus, M.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Kahle, R.; Georgi, L.; Voges, S.; Wöhrmann, M.; Lang, K.-D.
Conference Paper
2016High viscosity paste dosing for microelectronic applications
Thomas, Tina; Voges, S.; Braun, T.; Raatz, S.; Kahle, R.; Becker, K.-F.; Koch, M.; Fliess, M.; Bauer, J.; Schneider-Ramelow, M.; Lang, K.-D.
Journal Article
2016In-situ measuring module for transfer molding process monitoring
Kahle, Ruben; Braun, T.; Bauer, J.; Becker, K.-F.; Schneider-Ramelow, M.; Lang, K.-D.
Journal Article
2016In-situ monitoring of interface delamination by local thermal transducers exemplified for a flip-chip package
Wunderle, B.; May, D.; Abo Ras, M.; Sheva, S.; Schulz, M.; Wöhrmann, M.; Bauer, J.; Keller, J.
Conference Paper
2016Inline monitoring of epoxy molding compound in transfer molding process for smart power modules
Kaya, B.; Kaiser, J.-M.; Becker, K.-F.; Braun, T.; Lang, K.-D.
Conference Paper
2016Opportunities of fan-out wafer level packaging (FOWLP) for RF applications
Braun, T.; Töpper, M.; Becker, K.-F.; Wilke, M.; Huhn, M.; Maass, U.; Ndip, I.; Aschenbrenner, R.; Lang, K.-D.
Conference Paper
2016Potential and challenges of fan-out panel level packaging
Braun, T.; Becker, K.-F.; Kahle, R.; Raatz, S.; Töpper, M.; Aschenbrenner, R.; Voges, S.; Wöhrmann, M.; Lang, K.-D.
Conference Paper
2015A compact W-band LFMCW radar module with high accuracy and integrated signal processing
Zech, C.; Hülsmann, A.; Schlechtweg, M.; Reinold, Steffen; Giers, Christof; Kleiner, Bernhard; Georgi, L.; Kahle, R.; Becker, K.-F.; Ambacher, O.
Conference Paper
2015Heterogeneous integration of a miniaturized W-band radar module
Becker, Karl-Friedrich; Georgi, L.; Kahle, R.; Koch, M.; Voges, S.; Brandenburger, F.; Höfer, J.; Ehrhardt, C.; Zech, C.; Baumann, B.; Huelsmann, A.; Grasenack, A.; Reinold, S.; Kleiner, B.; Braun, T.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2015Large Area LED Package
Goullon, L.; Jordan, R.; Braun, T.; Bauer, J.; Becker, F.; Hutter, M.; Schneider-Ramelow, M.; Lang, K.D.
Conference Paper
2015Mobility and bandwidth prediction as a service in virtualized LTE systems
Karimzadeh, M.; Zhao, Z.; Hendriks, L.; O. Schmidt, R. de; Fleur, S. la; Berg, H. van den; Pras, A.; Braun, T.; Corici, M.J.
Conference Paper
2015Polymer-bonded La(Fe,Mn,Si)13 H
Radulov, I.A.; Skokov, K.P.; Karpenkov, D.Y.; Braun, T.; Gutfleisch, O.
Journal Article
2014Adhesive-based self-alignment mechanisms for modular stacked microsystems
Braun, T.; Jagodzinska, Jagoda; Becker, Karl-Friedrich; Bauer, Jörg; Georgi, Leopold; Ostmann, Andreas; Aschenbrenner, Rolf; Lang, Klaus-Dieter
Conference Paper
2014CMOS biosensor using TSV interposer technology
Ebefors, T.; Fredlund, J.; Jung, E.; Braun, T.
Journal Article
2014A modeling approach for predicting the effects of dielectric moisture absorption on the electrical performance of passive structures
Curran, B.; Ndip, I.; Engin, E.; Bauer, J.; Pötter, H.; Lang, K.-D.; Reichl, H.
Journal Article
2014Precision jetting of solder paste - a versatile tool for small volume production
Becker, K.-F.; Koch, M.; Voges, S.; Thomas, T.; Fliess, M.; Bauer, J.; Braun, T.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2013Anwendungen hydrophober Oberflächenmodifikationen in der Mikrosystemtechnik
Georgi, L. von; Kahle, R.; Lang, K.-D.; Bauer, J.; Braun, T.; Becker, K.-F.; Jung, E.
Journal Article
2013From wafer level to panel level mold embedding
Braun, Tanja; Becker, K.-F.; Voges, S.; Thomas, T.; Kahle, R.; Bauer, J.; Aschenbrenner, R.; Lang, K.-D.
Conference Paper
2013Grain size dependent physical and chemical properties of thick CVD diamond films for high energy density physics experiments
Dawedeit, C.; Kucheyev, S.O.; Shin, S.J.; Willey, T.M.; Bagge-Hansen, M.; Braun, T.; Wang, Y.M.; El-Dasher, B.S.; Teslich, N.E.; Biener, M.M.; Ye, J.; Kirste, L.; Röhlig, C.-C.; Wolfer, M.; Wörner, E.; Buuren, A.W. van; Hamza, A.V.; Wild, C.; Biener, J.
Journal Article
2013Moisture transport and swelling stresses at moulding-compound substrate interfaces investigated by molecular modeling and finite element simulations
Hölck, O.; Bauer, J.; Braun, T.; Walter, H.; Wittler, O.; Wunderle, B.; Lang, K.D.
Conference Paper
2013Panel level packaging for LED lighting
Braun, T.; Bauer, J.; Becker, K.-F.; Kahle, R.; Bader, V.; Voges, S.; Jordan, R.; Aschenbrenner, R.; Lang, K.D.
Conference Paper
2013Precision jetting of glob top materials - A methodology for process optimization
Becker, K.-F.; Koch, M.; Bauer, J.; Braun, T.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2013Radar based detection and tracking of objects under poor visibility conditions
Ens, A.; Zech, C.; Hülsmann, A.; Georgi, L.; Becker, K.-F.
Conference Paper
2013Smart power module molding advances: Evaluating high temperature suitability of molding compounds
Becker, K.-F.; Thomas, T.; Bauer, J.; Kahle, R.; Braun, T.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2013Transfer molding compounds for power electronic applications - a qualification methodology for HT capable materials
Braun, Tanja; Becker, K.-F.; Koch, M.; Thomas, T.; Amende, T.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2013Virtual prototyping with feral - adaptation and application of a simulator framework
Braun, T.; Christmann, D.; Gotzhein, R.; Igel, A.; Forster, T.; Kuhn, T.
Conference Paper
2012Heterogenous integration - packaging on and in organic substrates
Becker, Karl-Friedrich; Braun, T.; Bauer, J.; Böttcher, L.; Ostmann, A.; Pahl, B.; Haberland, J.; Kallmayer, C.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Conference Paper
2012Innovation Driver of the Next Decade: Technology Follows Application
Lang, K.-D.; Pötter, H.; Aschenbrenner, R.; Becker, K.-F.; Boettcher, L.; Ehrmann, O.; Wilke, M.; Toepper, M.
Book Article
2012Large area mold embedding technology with PCB based redistribution
Braun, T.; Becker, K.-F.; Böttcher, L.; Ostmann, A.; Jung, E.; Voges, S.; Thomas, T.; Kahle, R.; Bader, V.; Bauer, J.; Aschenbrenner, R.; Schneider Ramelow, M.; Lang, K.-D.
Conference Paper
2012Transfer molding technology for smart power electronics modules - materials and processes
Becker, K.-F.; Joklitschke, D.; Braun, T.; Koch, M.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Nowak, T.; Aschenbrenner, R.; Schneider-Ramelow, M.; Thomas, T.; Bochow-Ness, O.; Lang, K.-D.
Conference Paper
2012Transfer molding technology for smart power electronics modules: Materials and processes
Becker, K.-F.; Joklitschke, D.; Braun, T.; Koch, M.; Thomas, T.; Schreier-Alt, T.; Bader, V.; Bauer, J.; Nowak, T.; Bochow-Ness, O.; Aschenbrenner, R.; Schneider-Ramelow, M.; Lang, K.-D.
Journal Article
2011Basic thermo-mechanical property estimation of a 3D-crosslinked epoxy/SiO2 interface using molecular modelling
Hölck, O.; Dermitzaki, E.; Wunderle, B.; Bauer, J.; Michel, B.
Journal Article
2011Comparative characterization of chip to epoxy interfaces by molecular modeling and contact angle determination
Hölck, O.; Bauer, J.; Wittler, O.; Michel, B.; Wunderle, B.
Conference Paper
2011Immersion silver as universal surface finish for COB technology
Göhre, J.; Schneider-Ramelow, M.; Becker, K.-F.; Hutter, M.
Conference Paper
2011The impact of moisture absorption on the electrical characteristics of organic dielectric materials
Curran, B.; Ndip, I.; Bauer, J.; Guttowski, S.; Lang, K.D.; Reichl, H.
Conference Paper
2011Through mold vias for stacking of mold embedded packages
Braun, T.; Becker, K.-F.; Voges, S.; Thomas, T.; Kahle, R.; Bader, V.; Bauer, J.; Piefke, K.; Krüger, R.; Aschenbrenner, R.; Lang, K.-D.
Conference Paper
2011TSV based silicon interposer technology for wafer level fabrication of 3D SiP modules
Zoschke, K.; Wolf, J.; Lopper, C.; Kuna, I.; Jurgensen, N.; Glaw, V.; Samulewicz, K.; Roder, J.; Wilke, M.; Wunsch, O.; Klein, M.; Suchodoletz, M.V.; Oppermann, H.; Braun, T.; Wieland, R.; Ehrmann, O.
Conference Paper
2010The biocompatibility of materials used in printed circuit board technologies with respect to primary neuronal and K562 cells
Mazzuferi, M.; Bovolenta, R.; Bocchi, M.; Braun, T.; Bauer, J.; Jung, E.; Iafelice, B.; Guerrieri, R.; Destro, F.; Borgatti, M.; Bianchi, N.; Simonato, M.; Gambari, R.
Journal Article
2010Contactless handling and precision positioning of smallest components for assembly of microelectronics
Braun, T.; Bauer, J.; Becker, K.-F.; Kahle, R.; Jung, E.; Koch, M.; Mollath, G.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2010Contactless material deposition by jetting for heterogeneous system integration
Becker, K.-F.; Kurz, A.; Reichl, H.; Koch, M.; Bauer, J.; Braun, T.
Conference Paper
2010Effects of biomaterials for Lab-on-a-chip production on cell growth and expression of differentiated functions of leukemic cell lines
Destro, F.; Borgatti, M.; Iafelice, B.; Gavioli, R.; Braun, T.; Bauer, J.; Böttcher, L.; Jung, E.; Bocchi, M.; Guerrieri, R.; Gambari, R.
Journal Article
2010Immersion Ag als Au-drahtbondbares und COB-geeignetes Universal-Finish für die multi-funktionale Leiterplatte
Schneider-Ramelow, M.; Göhre, J.-M.; Becker, K.-F.; Hutter, M.
Journal Article
2010KRAFAS - Projektergebnisse der innovativen Einbetttechnologien CID und CHIP+ für den Einsatz in automobilen Radarsensoren
Kostelnik, Jan; Ebling, F.; Becker, K.-F.; Kahle, R.; Kugler, A.; Sommer, J.-P.; Noack, E.; Richter, M.D.; Schneider, M.
Conference Paper
2010Large area embedding for heterogeneous system integration
Braun, T.; Becker, K.-F.; Böttcher, L.; Bauer, J.; Thomas, T.; Koch, M.; Kahle, R.; Ostmann, A.; Aschenbrenner, R.; Reichl, H.; Bründel, M.; Haag, J.F.; Scholz, U.
Conference Paper
2010Molecular dynamics approach to structure-property correlation in epoxy resins for thermo-mechanical lifetime modeling
Wunderle, B.; Dermitzaki, E.; Hölck, O.; Bauer, J.; Walter, H.; Shaik, Q.; Rätzke, K.; Faupel, F.; Michel, B.; Reichl, H.
Journal Article
2010Molecular modeling of a 3D-crosslinked epoxy resin and its interface to native SiO2 - property prediction in microelectronic packaging
Hölck, O.; Dermitzaki, E.; Wunderle, B.; Bauer, J.; Michel, B.; Reichl, H.
Conference Paper
2010Molecular modelling of microelectronic packaging materials - basic thermo-mechanical property estimation of a 3D-crosslinked epoxy / SiO2 interface
Hölck, O.; Dermitzaki, E.; Wunderle, B.; Bauer, J.; Michel, B.
Conference Paper
2010Nano- und micro sized filler particles for improved humidity resistance of encapsulants
Braun, T.; Bauer, J.; Georgi, L.; Becker, K.-F.; Koch, M.; Thomas, T.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2010Precision material deposition for SiP manufacturing using jetting processes
Becker, K.-F.; Kurz, A.; Reichl, H.; Koch, M.; Bauer, J.; Braun, T.
Conference Paper
2010Reliability study of the stud bump bonding flip chip technology on molded interconnect devices
Dressler, M.; Wunderle, B.; Becker, K.-F.; Reichl, H.
Conference Paper
2010Water diffusion in micro- and nano-particle filled encapsulants
Braun, T.; Georgi, L.; Bauer, J.; Koch, M.; Becker, K.-F.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2009Application of interfacial fracture mechanics approach for obtaining design rules for flip chip interconnections
Dressler, M.; Becker, K.-F.; Wunderle, B.; Auersperg, J.; Reichl, H.
Conference Paper
2009Biocompatible lab-on-substrate technology platform
Braun, T.; Böttcher, L.; Bauer, J.; Bocchi, M.; Faenza, A.; Guerrieri, R.; Gambari, R.; Becker, K.-F.; Jung, E.; Ostmann, A.; Koch, M.; Kahle, R.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2009Electrical design and characterization of elevated antennas at PCB-level
Ohnimus, F.; Podlasly, A.; Bauer, J.; Ostmann, A.; Ndip, I.; Guttowski, S.; Reichl, H.
Conference Paper
2009Electrical modeling and analysis of the impact of slits on microstrip lines in thin film polymer layers
Ndip, I.; Töpper, M.; Becker, K.-F.; Hirte, M.; Eidner, I.; Fischer, T.; Curran, B.; Bauer, J.; Scheel, W.; Guttowski, S.; Reichl, H.
Conference Paper
2009Embedding technologies for an automotive radar system
Becker, K.-F.; Koch, M.; Kahle, R.; Braun, T.; Böttcher, L.; Ostmann, A.; Kostelnik, J.; Ebling, F.; Noack, E.; Sommer, J.P.; Richter, M.; Schneider, M.; Reichl, H.
Conference Paper
2009Embedding technology development for a 77 GHz automotive radar system
Becker, Karl-Friedrich; Koch, M.; Kahle, R.; Braun, T.; Böttcher, L.; Ostmann, A.; Kostelnik, J.; Ebling, F.; Noack, E.; Sommer, J.P.; Richter, M.; Schneider, M.; Reichl, H.
Conference Paper
2009Embroidered interconnections and encapsulation for electronics in textiles for wearable electronics applications
Linz, Torsten; Vieroth, R.; Dils, C.; Koch, M.; Braun, T.; Becker, K.-F.; Kallmayer, C.; Hong, S.-M.
Conference Paper
Fulltext
2009Failure modeling of ACA-glued flip-chip on flex assemblies
Wunderle, B.; Kallmayer, C.; Walter, H.; Braun, T.; Gollhardt, A.; Michel, B.; Reichl, H.
Conference Paper
2009Flip chips on PCB - from single chip encapsulation to systems in package
Schreier-Alt, T.; Braun, T.; Becker, K.-F.; Rebholz, C.; Wunderle, B.; Reichl, H.
Journal Article
2009Interconnects for Buried W-Band MMICs Using Novel System-in-Package Technology
Richter, M.D.; Becker, K.-F.; Bottcher, L.; Schneider, M.
Conference Paper
2009Lab-on-substrate technology platform
Braun, T.; Böttcher, L.; Bauer, J.; Jung, E.; Becker, K.-F.; Ostmann, A.; Aschenbrenner, R.; Reichl, H.
Journal Article
2009Microtechnology platform for cell cell interaction detection
Jung, E.; Manessis, D.; Neumann, A.; Böttcher, L.; Braun, T.; Bauer, J.; Reichl, H.
Conference Paper
2009Molecular dynamics approach to structure-property correlation in epoxy resins for thermo-mechanical lifetime modeling
Wunderle, B.; Dermitzaki, E.; Hölck, O.; Bauer, J.; Walter, H.; Shaik, Q.; Rätzke, K.; Faupel, F.; Michel, B.; Reichl, H.
Conference Paper
2009Molecular dynamics simulation and mechanical characterisation for the establishment of structure-property correlations for epoxy resins in microelectronics packaging applications
Wunderle, B.; Dermitzaki, E.; Holck, O.; Bauer, J.; Walter, H.; Shaik, Q.; Ratzke, K.; Faupel, F.; Michel, B.
Conference Paper
2009A multi-test platform to evaluate the barrier properties of electronic encapsulants for advanced medical implants
Tathireddy, P.; Jung, E.; Bauer, J.; Schneider, B.; Khan-Malek, C.; Marquardt, K.; Solzbacher, F.
Conference Paper
2009Nondestructive failure analysis and simulation of encapsulated 0402 multilayer ceramic chip capacitors under thermal and mechanical loading
Wunderle, B.; Braun, T.; May, D.; Michel, B.; Reichl, H.
Journal Article
2009Plastic packaging for high temperature applications
Braun, T.; Becker, K.-F.; Bauer, J.; Koch, M.; Bader, V.; Kahle, R.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2009Smart sensor systems - packaging technologies for multi-sensory consumer applications
Jung, E.; Becker, K.-F.; Braun, T.; Aschenbrenner, R.
Conference Paper
2009Structure Property Correlation of epoxy resins under the influence of moisture; and comparison of Diffusion coefficient with MD-simulations
Dermitzaki, E.; Wunderle, B.; Bauer, J.; Walter, H.; Michel, B.
Conference Paper
2009Thermo-mechanical reliability during technology development of power chip-on-board assemblies with encapsulation
Wunderle, B.; Becker, K.-F.; Sinning, R.; Wittler, O.; Schacht, R.; Walter, H.; Schneider-Ramelow, M.; Halser, K.; Simper, N.; Michel, B.; Reichl, H.
Journal Article
2009Verfahren und Anordnung zur Herstellung einer Niedertemperaturkontaktierung für mikroelektronische Aufbauten
Bauer, J.; Becker, K.-F.; Kahle, R.
Patent
Fulltext
2008Adaption berührungslos induzierter Strukturbildungen mit Nanopartikeln für die Mikro-Nano-AVT: Abschlussbericht zum Förderprojekt BELOMINA. Förderkennzeichen: 16SV3535
Fiedler, S.; Braun, T.; Bauer, J.
Report
Fulltext
2008Berührungslose Bestückverfahren - Neue Ansätze für die AVT von Mikrosystemen
Becker, K.-F.; Fiedler, S.; Bauer, J.; Kolesnik, I.; Jung, E.; Mollath, G.; Schreck, G.; Reichl, H.
Journal Article
2008Contactless component handling on PCB using EWOD principles
Braun, T.; Becker, K.-F.; Koch, M.; Lienemann, J.; Kahle, R.; Bauer, J.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Design of 77 GHz interconnects for buried SiGe MMICs using novel system-in-package technology
Richter, M.D.; Becker, K.-F.; Böttcher, L.; Schneider, M.
Conference Paper
2008Design of 77 GHz interconnects for buried SiGe MMICs using novel system-in-package technology
Richter, M.D.; Becker, K.-F.; Böttcher, L.; Schneider, M.
Conference Paper
2008Embroidered interconnections and encapsulation for electronics in textiles for wearable electronics applications
Linz, Torsten; Vieroth, R.; Dils, C.; Koch, M.; Braun, T.; Becker, K.-F.; Kallmayer, C.; Hong, S.-M.
Conference Paper
Fulltext
2008Formation of new thermosets by the reaction of cyanates with thiophenols
Bauer, M.; Bauer, J.
Journal Article
2008KRAFAS - Einbetttechnologien für aktive Komponenten
Kostelnik, J.; Becker, K.-F.; Ebling, F.; Sommer, J.-P.; Noack, E.; Böttcher, L.
Journal Article
2008Lamination and laser structuring for a microwell array
Jung, E.; Manessis, D.; Neumann, A.; Böttcher, L.; Braun, T.; Bauer, J.; Reichl, H.; Iafelice, B.; Destro, F.; Gambari, R.
Journal Article
2008Lifetime Model for Flip-Chip on Flex using Anisotropic Conductive Adhesive under Moisture and Temperature Loading
Wunderle, B.; Kallmayer, C.; Walter, H.; Braun, T.; Michel, B.; Reichl, H.
Conference Paper
2008Micro to nano - scaling packaging technologies for future microsystems
Braun, T.; Becker, K.-F.; Bauer, J.; Hausel, F.; Pahl, B.; Wittler, O.; Mrossko, R.; Jung, E.; Ostmann, A.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Nano-particle enhanced encapsulants for improved humidity resistance
Braun, T.; Hausel, F.; Bauer, J.; Wittler, O.; Mrossko, R.; Bouazza, M.; Becker, K.-F.; Oestermann, U.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Nano-Particle Filled Epoxy Resins with Improved Diffusion Barrier Functionality
Braun, T.; Hausel, F.; Bauer, J.; Wittler, O.; Mrossko, R.; Bouazza, M.; Becker, K.-F.; Oestermann, U.; Koch, M.; Bader, V.; Minge, C.; Aschenbrenner, R.; Reichl, H.
Journal Article
2008Neue Verfahren und Werkstoffe für Halbleiterkomponenten
Pötter, H.; Becker, K.-F.; Hampicke, M.; Lang, K.-D.; Schmitz, S.; Töpper, M.
Journal Article
2008Numerical Simulation and Micro Deformation Measurements for Sensor Design in Automotive Technology
Sommer, J.-P.; Noack, E.; Michel, B.; Becker, K.-F.
Conference Paper
2008Reliability modeling & test for flip-chip on flex substrates with Ag-filled anisotropic conductive adhesive
Wunderle, B.; Kallmayer, C.; Walter, H.; Braun, T.; Michel, B.; Reichl, H.
Conference Paper
2008Reliable Encapsulation of Microsystems for Automotive Use
Becker, K.-F.; Braun, T.; Koch, M.; Bauer, J.; Wunderle, B.; Sommer, J.-P.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2008Structure Property Correlation of Epoxy Resins Under the Influence of Moisture and Temperature; and Comparison of Diffusion Coefficient with MD-Simulations
Dermitzaki, E.; Wunderle, B.; Bauer, J.; Walter, H.; Michel, B.
Conference Paper
2008Verfahren zur Kontaktierung, Zusammensetzung fuer die Chipkontaktierung sowie deren Verwendung
Bauer, J.; Kallmayer, C.; Pahl, B.
Patent
Fulltext
2008Zuverlässigkeit von Aufbauten mit in die Leiterplatte integrierten Bauelementen
Sommer, J.-P.; Michel, B.; Noack, E.; Seiler, B.; Becker, K.-F.; Neumann, A.
Conference Paper
2007Aluminium printed circuit board technology for biomedical microdevices
Iafelice, B.; Destro, F.; Manessis, D.; Gazzola, D.; Jung, E.; Böttcher, L.; Borgatti, M.; Braun, T.; Bauer, J.; Gavioli, R.; Gambari, R.; Ostmann, A.; Guerrieri, R.
Conference Paper
2007Converter film technology for homogeneous white light
Jordan, R.C.; Bauer, J.; Oppermann, H.
Conference Paper
2007Lamination and laser structuring for a DEP microwell array
Jung, E.; Manessis, D.; Neumann, A.; Böttcher, L.; Braun, T.; Bauer, J.; Reichl, H.
Conference Paper
2007Microtechnology for realization of dielectrophoresis enhanced microwells for biomedical applications
Braun, T.; Böttcher, L.; Bauer, J.; Manessis, D.; Jung, E.; Ostmann, A.; Becker, K.-F.; Aschenbrenner, R.; Reichl, H.; Guerrieri, R.; Gambari, R.
Conference Paper
2007Molecular Dynamics Simulation and Mechanical Characterisation of Epoxy Resins Examined at Different Temperatures
Dermitzaki, E.; Bauer, J.; Walter, H.; Wunderle, B.; Michel, B.; Reichl, H.
Conference Paper
2007Molecular dynamics simulation for the diffusion of water in amorphous polymers examined at different temperatures
Dermitzaki, E.; Bauer, J.; Walter, H.; Wunderle, B.; Michel, B.; Reichl, H.
Conference Paper
2007New sensor packaging concept for avionic application
Aschenbrenner, R.; Jung, E.; Braun, T.; Oestermann, U.; Bauer, J.; Becker, K.-F.; Reichl, H.
Conference Paper
2007Non-destructive failure analysis and modeling of encapsulated miniature SMD ceramic chip capacitors under thermal and mechanical loading
Wunderle, B.; Braun, T.; May, D.; Mazloum, A.; Bouazza, M.; Walter, H.; Wittier, O.; Schacht, R.; Becker, K.-F.; Schneider-Ramelow, M.; Michel, B.; Reichl, H.
Conference Paper
2007Overmolded FC-SiP for miniaturized devices
Jung, E.; Koch, M.; Becker, K.-F.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2007Rapid interface reliability testing of flip chip encapsulants
Rau, I.; Becker, K.-F.; Wunderle, B.; Reichl, H.
Conference Paper
2007Schaltanordnung und Verfahren zu deren Herstellung
Jung, E.; Becker, K.-F.; Wunderle, B.
Patent
Fulltext
2007Verfahren zur Herstellung einer elektronischen Baugruppe
Kostelnik, J.; Schaaf, U.; Kugler, A.; Becker, K.-F.; Neumann, A.
Patent
Fulltext
2007Verfahren zur Herstellung einer elektronischen Baugruppe sowie elektronische Baugruppe
Kugler, A.; Liebing, G.; Becker, K.-F.
Patent
Fulltext
2006Biocompatible hybrid flip-chip microsystem integration for next generation wireless neural interfaces
Töpper, M.; Klein, M.; Buschick, K.; Glaw, V.; Orth, K.; Ehrmann, O.; Hutter, M.; Oppermann, H.; Becker, K.-F.; Braun, T.; Ebling, F.; Reichl, H.; Kim, S.; Tathireddy, P.; Chakravarty, S.; Solzbacher, F.
Conference Paper
2006Development of a nano-structure based interconnection technology: Presentation held at the Congress and Exhibition Nanotechnology in Northern Europe 2006, Helsinki, Finnland, 16-18.05.06
Aschenbrenner, R.; Fiedler, S.; Löher, T.; Pahl, B.; Becker, K.-F.; Reichl, H.
Presentation
Fulltext
2006Diffusion of water in amorphous polymers at different temperatures using molecular dynamics simulation
Dermitzaki, E.; Bauer, J.; Wunderle, B.; Michel, B.
Conference Paper
2006High-temperature reliability of flip chip assemblies
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Journal Article
2006Identifying the reliability affecting parameters of SBB flip chip interconnections for automotive applications
Dreßler, M.; Rohde, H.; Liebing, G.; Becker, K.-F.; Wunderle, B.; Auersperg, J.; Reichl, H.
Conference Paper
2006Improved reliability of leadfree flip chip assemblies using direct underfilling by transfer molding
Braun, T.; Wunderle, B.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2006Influence of assembly process - material properties and geometry on the reliability of flip chip interconnections on MID for automotive applications
Dreßler, M.; Rohde, H.; Liebing, G.; Becker, K.-F.; Wunderle, B.; Reichl, H.
Conference Paper
2006Nano-structured interconnects for system integration
Aschenbrenner, R.; Fiedler, S.; Löher, T.; Pahl, B.; Becker, K.-F.; Reichl, H.
Conference Paper
2006Optimized heat transfer and homogeneous color converting for ultra high brightness LED package
Jordan, R.; Bauer, J.; Oppermann, H.
Conference Paper
2006Rapid tooling for high reliability transfer molded devices
Becker, K.-F.; Koch, M.; Gramckow, J.; Braun, T.; Bader, V.; Jung, E.; Lang, K.-D.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2006Substratbauteil mit eingebettetem Lichtwellenleiter und Strahlumlenkung und Verfahren zu dessen Herstellung
Bauer, J.; Beier, A.; Beil, P.; Demmer, P.; Ebling, F.; Franke, M.; Guenther, P.; Happel, T.; Kostelnik, J.; Moedinger, R.; Park, H.; Schroeder, H.
Patent
Fulltext
2006Temperaturstabile Wellenleiter und optische Kopplung für elektro-optische Leiterplatten
Schröder, H.; Bauer, J.; Ebling, F.; Pfeiffer, K.
Conference Paper
2006Waveguide and packaging technology for optical backplanes and hybrid electrical-optical circuit boards
Schröder, H.; Bauer, J.; Ebling, F.; Franke, M.; Beier, A.; Demmer, P.; Süllau, W.; Kostelnik, J.; Mödinger, R.; Pfeiffer, K.; Ostrzinski, U.; Griese, E.
Conference Paper
2005Chip in duromer technology for system in package realization
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Development of a scalelable interconnection technology for nano packaging
Becker, K.-F.; Löher, T.; Pahl, B.; Wittler, O.; Jordan, R.; Bauer, J.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Duromer MID technology for system-in-package generation
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.; Jung, E.
Journal Article
2005Film coating - large area encapsulation process for electronics packaging
Becker, K.-F.; Braun, T.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Film coatings as an encapsulation process for polymer electronics: Poster presentation
Becker, K.-F.; Braun, T.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005High temperature potential of flip chip assemblies for automotive applications
Braun, T.; Becker, K.-F.; Sommer, J.-P.; Löher, T.; Schottenloher, K.; Kohl, R.; Pufall, R.; Bader, V.; Koch, M.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005New Generation Interconnection Technology: Printed Circuit Boards with Integrated Optical Layers
Demmer, P.; Schröder, H.; Bauer, J.; Ebling, F.; Beil, P.; Albrecht, H.; Franke, M.; Beier, A.; Kostelnik, J.; Mödinger, R.; Pfeiffer, K.; Griese, E.
Conference Paper
2005A new wafer level packaging approach: Encapsulation, metallization and laser structuring for advanced system in package manufacturing
Becker, K.-F.; Braun, T.; Neumann, A.; Ostmann, A.; Coko, E.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Journal Article
2005New-generation interconnect
Albrecht, H.; Beier, A.; Demmer, P.; Franke, M.; Mödinger, R.; Pfeiffer, K.; Beil, P.; Kostelnik, J.; Bauer, J.; Ebling, F.; Schröder, H.; Griese, E.
Conference Paper
2005Polymerwellenleiter fuer opto-elektrische Schaltungstraeger
Pfeiffer, K.; Ostrzinski, U.; Schroeder, H.; Bauer, J.; Gruetzner, G.
Patent
Fulltext
2005Reliability potential of epoxy based encapsulants for automotive applications
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2005Technologien und Packaging für optische Wellenleiter in elektrisch-optischen Leiterplatten
Schröder, H.; Bauer, J.
Conference Paper
2004Erfolgreich Entwicklungsprojekte planen: Auswahl, Anpassung und Implementierung von Methoden zur Planung von Entwicklungsprojekten bei LEWA
Schuh, G.; Lindemann, U.; Kohlhase, N.; Braun, T.; Breuer, T.
Journal Article
2004Evolution of WLP: From Redristribution to 3-D Packaging and MEMS Packaging
Töpper, M.; Glaw, V.; Zoschke, K.; Jung, E.; Becker, K.-F.; Ehrmann, O.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2004Klebstoffsystem zur Bildung reversibler Klebeverbindungen
Flegel, H.; Kurzmann, P.; Becher, P.; Herrmann, K.; Bauer, M.; Schneider, J.; Bauer, J.; Krueger, H.; Neumann-Rodekirch, J.; Hirthammer, M.
Patent
Fulltext
2004Modelling and application of silicon microphone systems
Mammen, H.-T.; Stürmer, U.; Koch, M.; Köhne, H.; Becker, K.-F.; John, W.; Reichl, H.
Conference Paper
2004New optical pin for 90 degree waveguide coupling in electrical-optical circuit boards (EOCB)
Schröder, H.; Bauer, J.; Ebling, F.; Franke, M.; Happel, T.; Kostelnik, J.
Conference Paper
2004Optimizing Processes and Materials for Flip Chip Reliability
Becker, K.-F.; Adams, T.
Journal Article
2004Stackable system-on-packages with integrated components
Becker, K.-F.; Jung, E.; Ostmann, A.; Braun, T.; Neumann, A.; Aschenbrenner, R.; Reichl, H.
Journal Article
2003Automatische Lokalisierung von Gesichtern in digitalen Videoströmen
Braun, T.; Cavet, R. (Prüfer)
Thesis
2003Flip chip technology for high temperature automotive applications
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2003Packaging of micro devices for automotive applications
Jung, E.; Großer, V.; Becker, K.-F.; Koch, M.
Conference Paper
2003Vom Wafer zum System-in-Package: Neue Konzepte zur Miniaturisierung
Braun, T.; Becker, K.-F.; Ostmann, A.
Journal Article
2003Wafer level encapsulation for system in package generation
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Manessis, D.; Neumann, A.; Ostmann, A.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Cyanate ester based resin systems for snap-cure applications
Bauer, J.; Bauer, M.
Journal Article
2002Encapsulant characterization - valuable tools for process setup and failure analysis
Becker, K.F.; Braun, T.; Koch, M.; Vogel, D.; Aschenbrenner, R.; Reichl, H.; Hagedorn, H.W.; Neumann Rodekirch, J.
Conference Paper
2002Flip chip molding - highly reliable flip chip encapsulation
Braun, T.; Becker, K.F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Flip chip molding - Recent progress in flip chip encapsulation
Braun, T.; Becker, K.F.; Koch, M.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002Simultaneous flip chip underfill and encapsulation
Becker, K.F.; Braun, T.; Adams, T.
Journal Article
2002Wafer level encapsulation - a transfer molding approach to system in package generation
Braun, T.; Becker, K.-F.; Koch, M.; Bader, V.; Oystermann, U.; Manessis, D.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2002WELLENLEITERBAUELEMENTE ODER STRUKTUREN ODER TEILE DAVON ENHALTEND POLYCYANATCOPOLYMERE AUS POLYFUNKTIONELLEN CYANATEN UND FLUORIERTEN MONOCYANATEN
Bauer, M.; Bauer, J.; Dreyer, C.; Keil, N.; Zawadzki, C.
Patent
Fulltext
2001Accelerated testing of flip chip packages under dynamic load
Rau, I.; Miessner, R.; Liebing, G.; Becker, K.-F.
Conference Paper
2001Advanced flip chip encapsulation: Transfer molding process for simultaneous underfiling and postencapsulation
Becker, K.-F.; Braun, T.; Koch, M.; Ansorge, F.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2001Athermal polarisation-independent arrayed-waveguide grating (AWG) multiplexer using an all-polymer approach
Keil, N.; Yao, H.H.; Zawadzki, C.; Bauer, J.; Bauer, M.; Dreyer, C.; Schneider, J.
Conference Paper
2001Cyanatbasierte Klebstoffe fuer und in Kombination mit Reibbelaengen sowie Verfahren zum Herstellen von auf einer Unterlage haftenden Reibbelaegen
Bauer, M.; Bauer, J.; Severit, P.
Patent
Fulltext
2001The effect of side reactions on the optical loss of polycyanurate thermosets used in integrated optics
Dreyer, C.; Bauer, M.; Bauer, J.; Keil, N.; Yao, H.H.; Zawadzki, C.
Conference Paper
2001Hybrid polymer/silica vertical coupler switches
Keil, N.; Yao, H.H.; Zawadzki, C.; Lösch, K.; Satzke, K.; Wischmann, W.; Wirth, J. von; Schneider, J.; Bauer, A.; Bauer, J.; Bauer, M.
Conference Paper
2001Maßgeschneiderte Systemlösungen durch Packaging
Aschenbrenner, R.; Ostmann, A.; Becker, K.-F.; Jung, E.; Kallmeyer, C.
Journal Article
2001Plastic encapsulation technologies - Processes and characterization
Ansorge, F.; Becker, K.-F.; Braun, T.; Jung, E.; Misawa, D.
Conference Paper
2001Polymer optical interconnects for PCB
Schröder, H.; Bauer, J.; Ebling, F.; Scheel, W.
Conference Paper
2001Processing design rules for reliable reflowable underfill application
Kallmayer, C.; Becker, K.-F.; Jung, E.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2001Schnell haertbare Mischungen und Kits aus polyfunktionellen Cyanaten und Aminen, daraus herstellbare Duromere und Herstellungsverfahren hierfuer
Bauer, J.; Bauer, M.; Uhlig, C.
Patent
Fulltext
2001Test boards simplify flip chip underfill processing
Becker, K.-F.; Adams, T.
Journal Article
2000Aufbau-, Verbindungs- und Verkapselungstechnik in der Mechatronik. Neuartige Systemlösungen
Ansorge, F.; Becker, K.-F.; Großer, V.; Michel, B.; Braun, T.
Journal Article
2000BGA packaging technology for rapid prototyping supported by advanced analytics
Becker, K.-F.; Ansorge, F.; Aschenbrenner, R.; Krause, F.; Kämpfe, B.; Reichl, H.
Conference Paper
2000Dynamic mechanical analysis (DMA) of an highly-filled epoxy resin in thin layers
Braun, T.; Mießner, R.; Becker, K.-F.
Conference Paper
2000Integration of micro-mechatronics in automotive applications
Ansorge, F.; Becker, K.-F.; Michel, B.; Leutenbauer, R.; Großer, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2000Integration of micro-mechatronics in automotive applications using environmentally accepted materials
Ansorge, F.; Becker, K.-F.; Michel, B.; Leutenbauer, R.; Großer, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
2000Mechatronic solutions for modular MEMS
Amiri Jam, K.; Hillmann, V.; Braun, T.; Becker, K.-F.; Ansorge, F.; Großer, V.; Reichl, H.
Conference Paper
2000Mechatronik - Kleiner - Funktioneller - Intelligenter
Ansorge, F.; Braun, T.; Jansen, M.; Aab, V.; Sporer, M.
Conference Paper
2000Numerical and experimental investigations of large IC flip chip attach
Schubert, A.; Dudek, R.; Leutenbauer, R.; Coskina, P.; Becker, K.-F.; Kloeser, J.; Michel, B.; Reichl, H.; Baldwin, D.; Qu, J.; Sitaraman, S.; Wong, C.P.; Tummala, R.
Conference Paper
2000Stationaere Phase fuer die Chromatographie
Neumann Rodekirch, J.; Bauer, J.; Bauer, M.
Patent
Fulltext
2000Study on reflowable underfill materials for different flip chip processes
Kallmayer, C.; Becker, K.-F.; Jung, E.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1999Entwicklung eines CSP auf Waferebene
Simon, J.; Auersperg, J.; Becker, K.-F.; Busse, E.; Heinricht, K.; Kallmayer, C.; Schütt, J.; Töpper, M.; Reichl, H.
Book Article
1999Flip chip solder joint reliability
Schubert, A.; Dudek, R.; Vogel, D.; Becker, K.-F.; Kloeser, J.; Michel, B.; Reichl, H.
Conference Paper
1999VERFAHREN ZUM ABBAU VON POLYCYANURATHALTIGEN MATERIALIEN
Bauer, M.; Bauer, J.; Goecks, K.
Patent
Fulltext
1998Characterization of adhesive materials for high circuit density applications
Aschenbrenner, R.; Mießner, R.; Becker, K.-F.; Reichl, H.
Conference Paper
1998Elektrooptische und photonische Bauelemente
Nordmann, J.; Beckmann, S.; Etzbach, K.H.; Sens, R.; Bauer, M.; Krueger, H.; Bauer, J.; Guenzelmann, C.
Patent
Fulltext
1998Elektrooptische und photonische Bauelemente
Nordmann, J.; Beckmann, S.; Etzbach, K.H.; Sens, R.; Bauer, M.; Krueger, H.; Bauer, J.; Guenzelmann, C.; Hartmann, H.; Walter, A.
Patent
Fulltext
1998Elektrooptische und photonische Bauelemente
Nordmann, J.; Beckmann, S.; Etzbach, K.H.; Sens, R.; Bauer, M.; Krueger, H.; Bauer, J.; Guenzelmann, C.
Patent
Fulltext
1998Elektrooptische und photonische Bauelemente
Nordmann, J.; Beckmann, S.; Etzbach, K.H.; Sens, R.; Bauer, M.; Krueger, H.; Bauer, J.; Guenzelmann, C.; Hartmann, H.; Walter, A.; Flaig, R.
Patent
Fulltext
1998Influences of flip chip layout on the underfilling process
Becker, K.-F.; Schaub, M.; Mießner, R.; Ansorge, F.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1998Reliability aspects of molded BGA's related to material properties
Ehrlich, R.; Becker, K.-F.; Badri Ghavifekr, H.; Ansorge, F.; Aschenbrenner, R.; Reichl, H.; Sawai, K.; Tanaka, A.; Kumano, K.; Tenya, Y.; Chichon, M.; Hosokawa, H.
Conference Paper
1997Characterization of microsystem and packaging components by acoustic microscopy
Vogel, D.; Becker, K.-F.; Zakel, E.
Conference Paper
1997Influences on the reliability of underfilled flip chips
Becker, K.-F.; Jiang, H.; Ansorge, F.; Jung, E.; Zakel, E.; Reichl, H.
Conference Paper
1997Poly(melamin)dendrimere und Verfahren zu ihrer Herstellung
Bauer, J.; Bauer, M.; Neumann, J.
Patent
Fulltext
1997Recent progress in encapsulation technology and reliability investigation of mechatronic, CSP and BGA packages using flip chip interconnection technology
Ansorge, F.; Becker, K.-F.; Azdasht, G.; Ehrlich, R.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1997Recent progress in flexible molding and reliability investigation of CSP and BGA-packages using advanced interconnection technology
Becker, K.-F.; Ansorge, F.; Ehrlich, R.; Azdasht, G.; Bader, V.; Aschenbrenner, R.; Reichl, H.
Conference Paper
1995The Scientometric Weight of 50 nations in 27 Science Areas, 1989-1993. Part I. All Fields combined, Mathematics, Engineering, Chemistry and Physics
Braun, T.; Glänzel, W.; Grupp, H.
Journal Article
1995The Scientometric Weight of 50 nations in 27 Science Areas, 1989-1993. Part II. Life Sciences
Braun, T.; Glänzel, W.; Grupp, H.
Journal Article
1991Baculovirus-expressed myogenic determination factors require E12 complex formation for binding to the myosin-light-chain enhancer
Braun, T.; Gearing, K.; Wright, W.E.; Arnold, H.-H.
Journal Article
1991The four human muscle regulatory helix-loop-helix proteins Myf3-Myf6 exhibit similar hetero-dimerization and DNA binding properties
Braun, T.; Arnold, H.-H.
Journal Article
Fulltext
1991The muscle regulatory gene, Myf-6, has a biphasic pattern of expression during early mouse development
Bober, E.; Lyons, G.E.; Braun, T.; Cossu, G.; Buckingham, M.; Arnold, H.-H.
Journal Article
1991Transcription of the muscle regulatory gene Myf4 is regulated by serum components, peptide growth factors and signaling pathways involving G proteins
Salminen, A.; Braun, T.; Buchberger, A.; Juers, S.; Winter, B.; Arnold, H.-H.
Journal Article
1990Identification of three developmentally controlled isoforms of human myosin heavy chains
Bober, E.; Buchberger-Seidl, A.; Braun, T.; Singh, S.; Goedde, H.W.; Arnold, H.-H.
Journal Article
1990Isolation and characterization of human myogenic factors involved in lineage determination and regulation of gene expression
Braun, T.; Bober, E.; Winter, B.; Arnold, H.-H.; Buschhausen-Denker, G.
Conference Paper
1990Myf-6, a new member of the human gene family of myogenic determination factors - evidence for a gene cluster on chromosome 12
Braun, T.; Bober, E.; Winter, B.; Rosenthal, N.; Arnold, H.-H.
Journal Article
1990Transcriptional activation domain of the muscle-specific gene-regulatory protein myf5
Braun, T.; Winter, B.; Bober, E.; Arnold, H.-H.
Journal Article
1989Differential expression of myogenic determination genes in musle cells - possible autoactivation by the Myf gene products
Arnold, H.-H.; Bober, E.; Braun, T.; Buschhausen-Denker, G.; Grzeschik, K.-H.; Kotz, S.
Journal Article
1989A novel human muscle factor related to but distinct from MyoD1 induces myogenic conversion in 1OT1/2 fibroblasts
Braun, T.; Bober, E.; Tannich, E.; Arnold, H.-H.; Buschhausen-Denker, G.
Journal Article
1989Promoter upstream elements of the chicken cardiac myosin light-chain 2-A gene interact with transacting regulatory factors for muscle-specific transcription
Arnold, H.-H.; Braun, T.; Buschhausen-Denker, G.; Tannich, E.
Journal Article