Fraunhofer IWM


Scientific Publications


Jacobs, T; Junge, T.; Pastewka, L.:
Quantitative characterization of surface topography using spectral analysis
In: Surface topography, Vol.5 (2017), No.1, Art. 013001, 19 pp.
Maas, Peter; Riedel, H.; Schulze, V. :
Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen: Experimente, Modellbildung und Simulation
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 14)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1167-8
urn:nbn:de:0011-n-4415832
Polfer, Pit; Gumbsch, P.; Frohnapfel, B. :
Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 13)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1140-1
urn:nbn:de:0011-n-4350833
Schröder, Christian; Scherge, M.; Hoffmann, M. :
Untersuchung tribologischer Systeme mit Y-TZP-Keramiken
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 15)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1176-0
urn:nbn:de:0011-n-4524422
Amann, T.; Dold, C.; Kailer, A.:
Potential controlled tribological behavior of water-based ionic liquids
(International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB) <24, 2015, Tallinn>)
In: Hussainova, I.: Engineering materials and tribology: Selected, peer reviewed papers from the 24th International Baltic Conference on Engineering Materials & Tribology (BALTMATTRIB & IFHTSE 2015), November 5-6, 2015, Tallinn, Estonia. Pfaffikon: TTP, 2016. (Key engineering materials 674), pp. 250-256
urn:nbn:de:0011-n-4233969
Baiker, Maria; Riedel, H.; Böhlke, T.; Liewald, M. :
Mikrostruktursimulationen zur Ermittlung von Materialeigenschaften für Blechwerkstoffe und Anwendung in der Umformsimulation
Stuttgart: Fraunhofer Verlag, 2016
(Fraunhofer IWM Forschungsberichte 11)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1089-3
urn:nbn:de:0011-n-4318702
Beckmann, C.; Farajian, M.; Siegele, D.; Hohe, J.:
Modelling and simulation of fatigue crack initiation in metallic joints based on crystal plasticity
In: Letters in applied nanobioscience. Online journal, Vol.5 (2016), No.2, pp.354-357
Breinlinger, T.; Kraft, T.:
Coupled discrete element and smoothed particle hydrodynamics simulations of the die filling process
In: Computational particle mechanics, Vol.3 (2016), No.4, pp.505–511
urn:nbn:de:0011-n-4236595
Burget, Sebastian; Gumbsch, P.; Enzinger, N. :
Modellierung des Verformungs- und Versagensverhaltens punktgeschweißter Mischverbindungen zwischen mikrolegierten und pressgehärteten Stählen
Stuttgart: Fraunhofer Verlag, 2016
(Fraunhofer IWM Forschungsberichte 10)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 978-3-8396-1087-9
urn:nbn:de:0011-n-4235413
Butz, A.; Pagenkopf, J.; Baiker, M.; Helm, D.:
The concept of virtual material testing and its application to sheet metal forming simulations
(International Conference and Workshop Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet) <10, 2016, Bristol>)
In: Cardoso, R.P.R.: Numisheet 2016, 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Pt.B: General papers: Bristol, United Kingdom, 4-9 September 2016 . Bristol: IOP Publishing, 2016. (Journal of physics. Conference series 734), Art. 032107, 5 pp.
Dold, Christian; Scherge, Matthias :
Zum Einfluss struktureller Eigenschaften auf das tribologische und rheologische Verhalten geschmierter Reibkontakte am Beispiel von ionischen Flüussigkeiten
Karlsruhe: KIT-Bibliothek, 2016
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
Echlin, M.P.; Titus, M.; Lenthe, W.C.; Straw, M.; Gumbsch, P.; Pollock, T.M.:
Femtosecond Laser Damage in Metals and Semiconductors During TriBeam Tomography
In: Microscopy and microanalysis, Vol.22 (2016), No.S3, pp.148-149
Fliegener, Sascha; Gumbsch, P.; Böhlke, T. :
Micromechanical finite element modeling of long fiber reinforced thermoplastics
Stuttgart: Fraunhofer Verlag, 2016
(Fraunhofer IWM Forschungsberichte 8)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 978-3-8396-0969-9
urn:nbn:de:0011-n-3829726
Fromm, A.; Gurr, M.; Wendt, G.; Jänchen, R.:
Neue Sensortechnik für Verpackungsprozesse
In: Konstruktion, (2016), No.5, pp.75-77
Hempel, Nico; Nitschke-Pagel, Thomas; Dilger, Klaus; Moroz, Sergii; Varfolomeev, Igor:
Berechnung von Eigenspannungen in Mehrlagenrohrschweißverbindungen und Quantifizierung des Einflusses auf die Lebensdauer bei Schwingbeanspruchung: Schlussbericht. IGF-Vorhaben 17619 N der Forschungsvereinigung Schweißen und verwandte Verfahren e.V.
Braunschweig: ifs, 2016
urn:nbn:de:0011-n-4231638
Kailer, A.; Stephan, M.:
On the feasibility of the Chevron Notch Beam method to measure fracture toughness of fine-grained zirconia ceramics
In: Dental materials, Vol.32 (2016), No.10, pp.1256–1262
urn:nbn:de:0011-n-4233636
Kertsch, L.; Helm, D.:
Modelling grain growth in the framework of Rational Extended Thermodynamics
In: Modelling and simulation in materials science and engineering, Vol.24 (2016), No.4, Art. 045001, 17 pp.
urn:nbn:de:0011-n-4042738
Khamassi, J.; Bierwisch, C.; Pelz, P.:
Geometry optimization of branchings in vascular networks
In: Physical Review. E, Vol.93 (2016), No.6, Art. 062408, 10 pp.
urn:nbn:de:0011-n-4234262
Körner, W.; Krugel, G.; Elsässer, C.:
Theoretical screening of intermetallic ThMn12-type phases for new hard-magnetic compounds with low rare earth content
In: Scientific Reports, Vol.6 (2016), Art. 24686, 9 pp.
Kozinsky, B.; Akhade, S.A.; Hirel, P.; Hashibon, A.; Elsässer, C.; Mehta, P.; Logeat, A.; Eisele, U.:
Effects of sublattice symmetry and frustration on ionic transport in garnet solid electrolytes
In: Physical review letters, Vol.116 (2016), No.5, Art. 055901, 5 pp.
Lautz, J. von; Pastewka, L.; Gumbsch, P.; Moseler, M.:
Molecular dynamic simulation of collision-induced third-body formation in hydrogen-free diamond-like carbon asperities
In: Tribology letters, Vol.63 (2016), No.2, Art.26, 9 pp.
urn:nbn:de:0011-n-4233646
Linsler, D.:
Einlaufverhalten einer untereutektischen AlSi-Legierung unter Berücksichtigung des Randzonengefüges
Karlsruhe, Univ., Diss., 2016
Mahler, M.; Gumbsch, P. (Betreuer) :
Entwicklung einer Auswertemethode für bruchmechanische Versuche an kleinen Proben auf der Basis eines Kohäsivzonenmodells
Karlsruhe: KIT Scientific Publishing, 2016
(Schriftenreihe des Instituts für Angewandte Materialien 51)
Zugl.: Karlsruhe, Univ., Diss., 2015
ISBN 978-3-7315-0441-2
Metzger, Mario; Riedel, H.; Böhlke, T.; Seifert, T. :
Mikrostruktur- und mechanismusbasierte Werkstoffmodelle zur Beschreibung des Deformations- und Lebensdauerverhaltens von thermomechanisch beanspruchten Graugusswerkstoffen
Stuttgart: Fraunhofer Verlag, 2016
(Fraunhofer IWM Forschungsberichte 12)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1115-9
urn:nbn:de:0011-n-4263911
Olsson, P.A.T.; Mrovec, M.; Kroon, M.:
First principles characterisation of brittle transgranular fracture of titanium hydrides
In: Acta Materialia, Vol.118 (2016), pp.362-373
Pastewka, L.; Robbins, M.O.:
Contact area of rough spheres: Large scale simulations and simple scaling laws
In: Applied Physics Letters, Vol.108 (2016), No.22, Art. 221601, 5 pp.
Platzer, Werner; Boie, Inga; Ragwitz, Mario; Kost, Christoph; Thoma, Jürgen; Vogel, Axel; Fluri, Thomas; Pfeiffer, Wulf; Burmeister, Frank; Tham, Nils; Pudlik, Martin; Bohn, Sven; Agsten, Michael; Bretschneider, Peter; Westermann, Dirk; Kranzer, Dirk; Schlegl, Thomas:
Fraunhofer topics of the future "SUPERGRID". Supergrid - Approach for the integration of renewable energy in Europe and North Africa: SUPERGRID study
Freiburg: Fraunhofer ISE, 2016
urn:nbn:de:0011-n-4040346
Platzer, Werner; Boie, Inga; Ragwitz, Mario; Kost, Christoph; Thoma, Jürgen; Vogel, Axel; Fluri, Thomas; Pfeiffer, Wulf; Burmeister, Frank; Tham, Nils; Pudlik, Martin; Bohn, Sven; Agsten, Michael; Bretschneider, Peter; Westermann, Dirk; Kranzer, Dirk; Schlegl, Thomas:
Fraunhofer Zukunftsthemen "SUPERGRID". Supergrid - Ansatz für die Integration von Erneuerbaren Energien in Europa und Nordafrika: Studie SUPERGRID
Freiburg/Brsg.: Fraunhofer ISE, 2016
urn:nbn:de:0011-n-4040333
Rasp, Tobias:
Modellierung von Anisotropieentwicklung und Rissausbreitung beim Sintern dünner keramischer Schichten
Stuttgart: Fraunhofer Verlag, 2016
(Fraunhofer IWM Forschungsberichte 9)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 978-3-8396-0974-3
urn:nbn:de:0011-n-3818642
Salje, E.K.H.; Li, S.; Stengel, M.; Gumbsch, P.; Ding, X.:
Flexoelectricity and the polarity of complex ferroelastic twin patterns
In: Physical Review. B, Vol.94 (2016), No.2, Art.024114
urn:nbn:de:0011-n-4218314
Savio, D.; Pastewka, L.; Gumbsch, P.:
Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts
In: Science advances, Vol.2 (2016), No.3, Art. e1501585, 6 pp.
Scherge, M.; Böttcher, R.; Kürten, D.; Linsler, D.:
Multi-Phase Friction and Wear Reduction by Copper Nanopartices
In: Lubricants, Vol.4 (2016), No.36, 13 pp.
Scherge, M.; Brink, A.; Linsler, D.:
Tribofilms Forming in Oil-Lubricated Contacts
In: Lubricants, Vol.4 (2016), No.27, 9 pp.
Schweizer, F.:
Simulation von Laserschweißprozessen zur Bewertung der wasserstoffbeeinflussten Kaltrissneigung hochfester Stähle
Karlsruhe, Univ., Diss., 2016
Song, H.-W.; Sun, D.-Z.; Andrieux, F.; Zhang, S.-H.:
Determination of instability of a DP 980 steel sheet under different stress states based on experiment and theoretical models
(International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM) <12, 2016, Troyes>)
In: Saanouni, K.: NUMIFORM 2016, 12th International Conference on Numerical Methods in Industrial Forming Processes: University of Technology of Troyes, France, 4-7 July, 2016. Les Ulis: EDP Sciences, 2016. (MATEC Web of Conferences 80), Art. 03007, 6 pp.
Stefano, D. di:
First-principles investigation of hydrogen interaction with metals
Freiburg/Brsg., Univ., Diss., 2016
Stefano, D. di; Nazarov, R.; Hickel, T.; Neugebauer, J.; Mrovec, M.; Elsässer, C.:
First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe
In: Physical Review. B, Vol.93 (2016), No.18, Art. 184108, 14 pp.
urn:nbn:de:0011-n-4042408
Steier, V.F.; Ashiuchi, E.S.; Reißig, L.; Araújo, J.A.:
Effect of a deep cryogenic treatment on wear and microstructure of a 6101 aluminum alloy
In: Advances in materials science and engineering. Online journal, (2016), Art.1582490, 12 pp.
Straub, T.; Kraft, O.; Eberl, C.; Lapusta, Y. :
Experimental investigation of crack initiation. In face-centered cubic materials in the high and very high cycle fatigue regime
Karlsruhe: KIT Scientific Publishing, 2016
(Schriftenreihe des Instituts für Angewandte Materialien 55)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 978-3-7315-0471-9
Urban, D.F.; Körner, W.; Elsässer, C.:
Mechanisms for p-type behavior of ZnO, Zn1−xMgxO, and related oxide semiconductors
In: Physical Review. B, Vol.94 (2016), No.7, Art.075140
Veile, Ines; Tempel, Peter; Weikert-Müller, Miriam:
To what extent may we accept manufacturing-related microscopic defects in cast steel?
(World Conference on Non-Destructive Testing (WCNDT) <19, 2016, Munich>)
In: International Committee for Non-Destructive Testing -ICNDT-: 19th World Conference on Non-Destructive Testing, WCNDT 2016: Munich, Gemany, 13-17 June 2016; Proceedings; USB-Stick. Berlin: DGZfP, 2016, Paper P180, 1 pp.
urn:nbn:de:0011-n-3995687
urn:nbn:de:0011-n-399568-17
Walter, M.; Moseler, M.; Pastewka, L.:
Offset-corrected Δ-Kohn-Sham scheme for semiempirical prediction of absolute x-ray photoelectron energies in molecules and solids
In: Physical Review. B, Vol.94 (2016), No.4, Art. 041112(R)
Xie, D.; Li, S.; Li, M.; Wang, Z.; Gumbsch, P.; Sun, J.; Ma, E.; Li, J.; Shan, Z.:
Hydrogenated vacancies lock dislocations in aluminium
In: Nature Communications, Vol.7 (2016), Art. 13341, 7 pp.
Adler, J.; Adler, O.; Kreif, M.; Cohen, O.; Grosso, B.; Hashibon, A.; Cooper, V.R.:
Mini-review of electron density visualization
(Workshop on Computer Simulation Studies in Condensed Matter Physics (CSP) <28, 2015, New Orleans/La.>)
In: Physics procedia, Vol.68 (2015), pp.2–6
Amann, Tobias; Kailer, Andreas; Herrmann, Mathias:
Influence of electrochemical potentials on the tribological behavior of silicon carbide and diamond-coated silicon carbide
In: Journal of bio- and tribo-corrosion, Vol.1 (2015), No.4, Art.30, 14 pp.
urn:nbn:de:0011-n-3704072
Barros Bouchet, M.I. de; Matta, C.; Vacher, B.; Le-Mogne, T.; Martin, J.M.; Lautz, J. von; Ma, T.; Pastewka, L.; Otschik, J.; Gumbsch, P.; Moseler, M.:
Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating
In: Carbon, Vol.87 (2015), pp.317-329
urn:nbn:de:0011-n-3434845
Beckmann, C.:
Probabilistische Methode zur Vorhersage des effektiven Materialverhaltens fester Schäume mit ungeordneter Mikrostruktur
Halle/Saale: Martin-Luther-Universität Halle-Wittenberg, 2015
Halle, Univ., Diss., 2015
Beckmann, N.:
Atomistische Simulation tribologischer Elementarprozesse bei nanokristallinen Übergangsmetallen
Freiburg: Univ. Freiburg, 2015
Freiburg/Brsg., Univ., Diss., 2015
Bitzek, E.; Kermode, J.R.; Gumbsch, P.:
Atomistic aspects of fracture
In: International Journal of Fracture, Vol.191 (2015), No.1-2, pp.13-30
Braun, D.; Gumbsch, P. (Betreuer) :
Größeneffekte bei strukturierten tribologischen Wirkflächen
Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
Breinlinger, T.; Hashibon, A.; Kraft, T.:
Simulation of the influence of surface tension on granule morphology during spray drying using a simple capillary force model
In: Powder Technology, Vol.283 (2015), pp.1-8
urn:nbn:de:0011-n-3520306
Breinlinger, T.; Hashibon, A.; Kraft, T.:
Simulation of the spray drying of single granules: The correlation between microscopic forces and granule morphology
In: Journal of the American Ceramic Society, Vol.98 (2015), No.6, pp.1778-1786
urn:nbn:de:0011-n-3519910
Breinlinger, Thomas; Gumbsch, P. (Prüfer); Luding, S. (Prüfer) :
Entwicklung und Anwendung von Methoden zur Simulation des Trocknens von Suspensionen
Stuttgart: Fraunhofer Verlag, 2015
(Fraunhofer IWM Forschungsberichte 5)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 978-3-8396-0903-3
ISBN 3-8396-0903-8
urn:nbn:de:0011-n-3561657
Brink, A.:
Einlaufverhalten von geschmierten Stahl-Stahl-Paarungen unter Berücksichtigung der Mikrostruktur
Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
Bückmann, T.; Gumbsch, P. (Betreuer) :
On Mechanical Metamaterials
Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
Casajús, P.; Winzer, N.:
Electrochemical noise analysis of the corrosion of high-purity Mg-Al alloys
In: Corrosion science, Vol.94 (2015), pp.316-326
urn:nbn:de:0011-n-3435141
Dold, C.; Amann, T.; Kailer, A.:
Influence of electric potentials on friction of sliding contacts lubricated by an ionic liquid
In: Physical chemistry, chemical physics : PCCP, Vol.17 (2015), No.16, pp.10339-10342
urn:nbn:de:0011-n-3435935
Fleischmann, E.; Konrad, C.; Preussner, J.; Völkl, R.; Affeldt, E.; Glatzel, U.:
Influence of solid solution hardening on creep properties of single-crystal nickel-based superalloys
In: Metallurgical and materials transactions. A, Vol.46 (2015), No.3, pp.1125-1130
urn:nbn:de:0011-n-3365756
Gehrmann, J.; Pettifor, D.G.; Kolmogorov, A.N.; Reese, M.; Mrovec, M.; Elsässer, C.; Drautz, R.:
Reduced tight-binding models for elemental Si and N, and ordered binary Si-N systems
In: Physical Review. B, Vol.91 (2015), No.5, Art. 054109
urn:nbn:de:0011-n-3365948
Grosso, B.; Cooper, V.R.; Pine, P.; Hashibon, A.; Yaish, Y.; Adler, J.:
Visualization of electronic density
In: Computer physics communications, Vol.195 (2015), pp.1-13
Grotjahn, Tobias:
PECVD Prozessüberwachung - Wiederholbare Nutzung technischer Plasmen
Stuttgart: Fraunhofer Verlag, 2015
(Fraunhofer IWM Forschungsberichte 6)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 3-8396-0904-6
ISBN 978-3-8396-0904-0
urn:nbn:de:0011-n-3564601
Hardenacke, V.:
Verbesserung lokaler Spaltbruchmodelle unter Berücksichtigung mikromechanischer Vorgänge
Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
Hashibon, A.; Rasp, T.; Franklin, N.; Tziakos, I.; Pinte, D.; Dadvand, P.; Roig, C.; Mattila, K.; Puurtinen, T.; Hiltunen, K.; Roman-Perez, G.; Garcia, G.; Adler, J.:
Common universal data structures (CUDS) and vocabulary in the SimPhoNy integrated framework
(INTOP, Workshop of the European Multi-Scale Modelling Cluster EUMMC - Interoperability in MultiscaleModelling of Nano-Enabled Materials <3, 2015, Jyväskylä/Finland>)
In: Kilappa, V.: INTOP 2015, the 3rd Workshop of the European Multi-scale Modelling Cluster: Interoperability in MultiscaleModelling of Nano-enabled Materials. Proceedings: 28. - 29.05.2015 in Jyväskylä, Finland. Jyväskylä/Finland: University of Jyväskylä, Department of Physics, 2015, pp. 21-22
Hoffmann, M.W.G.; Casals, O.; Gad, A.E.; Mayrhofer, L.; Fàbrega, C.; Caccamo, L.; Hernandez-Ramirez, F.; Lilienkamp, G.; Daum, W.; Moseler, M.; Shen, H.; Waag, A.; Prades, J.D.:
Novel approaches towards highly selective self-powered gas sensors
(European Conference on Solid-State Transducers (Eurosensors) <29, 2015, Freiburg>)
In: Procedia Engineering, Vol.120 (2015), pp.623-627
Hohe, J.; Beckmann, C.; Paul, H.:
Modeling of uncertainties in long fiber reinforced thermoplastics
In: Materials and design, Vol.66 (2015), Pt.B, pp.390-399
urn:nbn:de:0011-n-3016810
Klemenz, A.:
Atomistische Simulation der Materialmodifikation durch die Kohlenstoffallotrope Graphen und Kohlenstoffnanoröhren
Freiburg/Brsg., Univ., Diss., 2015
Körner, W.; Urban, D.F.; Elsässer, C.:
Generic origin of subgap states in transparent amorphous semiconductor oxides illustrated for the cases of In-Zn-O and In-Sn-O
In: Physica status solidi. A, Vol.212 (2015), No.7, pp.1476-1481
urn:nbn:de:0011-n-3523304
Kürten, Dominik Rainer:
Einfluss der tribochemischen Schmierstoffoxidation auf die wasserstoffinduzierte Wälzkontaktermüdung
Stuttgart: Fraunhofer Verlag, 2015
(Fraunhofer IWM Forschungsberichte 7)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2015
ISBN 3-8396-0944-5
ISBN 978-3-8396-0944-6
urn:nbn:de:0011-n-3672723
Lagger, H.G.; Breinlinger, T.; Korvink, J.G.; Moseler, M.; Renzo, A. di; Maio, F. di; Bierwisch, C.:
Influence of hydrodynamic drag model on shear stress in the simulation of magnetorheological fluids
In: Journal of non-Newtonian fluid mechanics, Vol.218 (2015), pp.16-26
urn:nbn:de:0011-n-3521653
Lagger, Hanna:
Particle-based simulation of sheared magnetorheological fluids
Stuttgart: Fraunhofer Verlag, 2015
(Fraunhofer IWM Forschungsberichte 3)
Zugl.: Freiburg, Univ., Diss., 2014
ISBN 3-8396-0832-5
ISBN 978-3-8396-0832-6
urn:nbn:de:0011-n-3263610
Le, H.H.; Parsaker, M.; Sriharish, M.N.; Henning, S.; Menzel, M.; Wiessner, S.; Das, A.; Do, Q.K.; Heinrich, G.; Radusch, H.J.:
Effect of rubber polarity on selective wetting of carbon nanotubes in ternary blends
In: eXPRESS polymer letters, Vol.9 (2015), No.11, pp.960-971
Lenthe, W.C.; Echlin, M.P.; Trenkle, A.; Syha, M.; Gumbsch, P.; Pollock, T.M.:
Quantitative voxel-to-voxel comparison of TriBeam and DCT strontium titanate three-dimensional data sets
In: Journal of Applied Crystallography, Vol.48 (2015), pp.1034-1046
urn:nbn:de:0011-n-3696077
Li, S.Z.; Li, Y.G.; Lo, Y.C.; Neeraj, T.; Srinivasan, R.; Ding, X.D.; Sun, J.; Qi, L.; Gumbsch, P.; Li, J.:
The interaction of dislocations and hydrogen-vacancy complexes and its importance for deformation-induced proto nano-voids formation in alpha-Fe
In: International Journal of Plasticity, Vol.74 (2015), No.11, pp.175-191
urn:nbn:de:0011-n-3694015
Lienhard, J.; Böhme, W.:
Characterisation of resin transfer moulded composite laminates under high rate tension, compression and shear loading
In: Engineering fracture mechanics, Vol.149 (2015), pp.338-350
urn:nbn:de:0011-n-3823098
Marchetto, D.; Feser, T.; Dienwiebel, M.:
Microscale study of frictional properties of graphene in ultra high vacuum
In: Friction, Vol.3 (2015), No.2, pp.161-169
urn:nbn:de:0011-n-3704555
Metzger, M.; Seifert, T.:
Computational assessment of the microstructure-dependent plasticity of lamellar gray cast iron - Part I: Methods and microstructure-based models
In: International Journal of Solids and Structures, Vol.66 (2015), pp.184-193
urn:nbn:de:0011-n-3522427
Metzger, M.; Seifert, T.; Schweizer, C.:
Does the cyclic J -integral Delta J describe the crack-tip opening displacement in the presence of crack closure?
In: Engineering fracture mechanics, Vol.134 (2015), pp.459-473
urn:nbn:de:0011-n-3320648
Metzler, L.; Reichenbach, T.; Brügner, O.; Komber, H.; Lombeck, F.; Müllers, S.; Hanselmann, R.; Hillebrecht, H.; Walter, M.; Sommer, M.:
High molecular weight mechanochromic spiropyran main chain copolymers via reproducible microwave-assisted Suzuki polycondensation
In: Polymer chemistry, Vol.6 (2015), No.19, pp.3694-3707
Neubrand, Achim; Hausherr, Jan Marcel; Lauer, A.; Weiß, Roland J.; Wilhelmi, Christian:
Investigation of cutting-induced damage in CMC bend bars
(Workshop on Testing and Modeling Ceramic & Matrix Composites for High Temperatures <2014, Paris>)
In: Baranger, E.: Testing and Modeling Ceramic & Carbon Matrix Composites: LMT, ENS-Cachan/CNRS/Université Paris-Saclay, France, June 4-6, 2014. Les Ulis: EDP Sciences, 2015. (MATEC Web of Conferences 29.2015), Art. 00004, 12 pp.
Peguiron, A.; Colombi Ciacchi, L.; De Vita, A.; Kermode, J.R.; Moras, G.:
Accuracy of buffered-force QM/MM simulations of silica
In: The Journal of chemical physics, Vol.142 (2015), No.6, Art. 064116
urn:nbn:de:0011-n-3366010
Peguiron, A.:
Atomistic simulations of silica by sequential and concurrent multiscale coupling
Freiburg/Brsg., Univ., Diss., 2015
Renz, Alexander:
Untersuchung des Verschleißverhaltens von keramischen Schneidstoffen im trockenen Gleitreibungskontakt mit Nickelbasislegierungen
Stuttgart: Fraunhofer Verlag, 2015
(Fraunhofer IWM Forschungsberichte 4)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2014
ISBN 3-8396-0844-9
ISBN 978-3-8396-0844-9
urn:nbn:de:0011-n-3280888
Salje, E.K.H.; Li, S.; Zhao, Z.; Gumbsch, P.; Ding, X.:
Polar twin boundaries and nonconventional ferroelectric switching
In: Applied Physics Letters, Vol.106 (2015), No.21, Art. 212907, 5 pp.
urn:nbn:de:0011-n-3521181
Seif, D.; Po, G.; Mrovec, M.; Lazar, M.; Elsässer, C.; Gumbsch, P.:
Atomistically enabled nonsingular anisotropic elastic representation of near-core dislocation stress fields in alpha-iron
In: Physical Review. B, Vol.91 (2015), No.18, Art.184102
urn:nbn:de:0011-n-3435077
Senn, M.; Schweizer, F.; Pfeiffer, W.:
Universal concept for the optimization of step sizes in manufacturing processes
(Conference on Modelling of Machining Operations (CMMO) <15, 2015, Karlsruhe>)
In: Procedia CIRP, Vol.31 (2015), pp.53-57
Slaby, S.A.:
Charakterisierung und Bewertung der Zug- und Ermüdungseigenschaften von Mikrobauteilen aus 17-4PH Edelstahl - Ein Vergleich von mikropulverspritzgegossenem und konventionell hergestelltem Material
Karlsruhe, Univ., Diss., 2015
Stefano, D. di; Mrovec, M.; Elsässer, C.:
First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel
In: Acta Materialia, Vol.98 (2015), pp.306-312
urn:nbn:de:0011-n-3694794
Stefano, D. di; Mrovec, M.; Elsässer, C.:
First-principles investigation of quantum mechanical effects on the diffusion of hydrogen in iron and nickel
In: Physical Review. B, Vol.92 (2015), No.22, Art.224301
urn:nbn:de:0011-n-3976758
Stoyanov, P.; Linsler, D.; Schlarb, T.; Scherge, M.; Schwaiger, R.:
Dependence of tribofilm characteristics on the running-in behavior of aluminum-silicon alloys
In: Journal of Materials Science : JMS, Vol.50 (2015), No.16, pp.5524-5532
urn:nbn:de:0011-n-3520385
Stoyanov, P.; Merz, R.; Romero, P.A.; Wählisch, F.C.; Torrents Abad, O.; Gralla, R.; Stemmer, P.; Kopnarski, M.; Moseler, M.; Bennewitz, R.; Dienwiebel, M.:
Surface softening in metal-ceramic sliding contacts: An experimental and numerical investigation
In: ACS nano, Vol.9 (2015), No.2, pp.1478-1491
Straub, T.; Berwind, M.F.; Kennerknecht, T.; Lapusta, Y.; Eberl, C.:
Small-scale multiaxial setup for damage detection into the very high cycle fatigue regime
In: Experimental mechanics, Vol.55 (2015), No.7, pp.1285-1299
urn:nbn:de:0011-n-3521355
Weygand, D.; Mrovec, M.; Hochrainer, T.; Gumbsch, P.:
Multiscale simulation of plasticity in bcc metals
In: Annual review of materials research, Vol.45 (2015), pp.369-390
urn:nbn:de:0011-n-3704362
Ziebarth, B.:
Interactions between metallic impurities and extended defects in silicon from first-principles
Freiburg/Brsg., Univ., Diss., 2015
Ziebarth, B.; Mrovec, M.; Elsässer, C.; Gumbsch, P.:
Interstitial iron impurities at grain boundaries in silicon: A first-principles study
In: Physical Review. B, Vol.91 (2015), No.3, Art. 035309
urn:nbn:de:0011-n-3320586
Andrieux, F.; Klitschke, S.; Böhme, W.; Sun, D.-Z.:
Characterization and modeling of the deformation and damage of an aluminum sheet for crash
(International Conference on Impact Loading of Lightweight Structures (ICILLS ) <4, 2014, Cape Town>)
In: 4th International Conference on Impact Loading of Lightweight Structures, ICILLS 2014. Papers. Online rescource: 12-16 January 2014, Cape Town, South Africa, 4 pp.
Augenstein, E.; Helm, D.; Bienger, P.:
Crevice-free, high reliability bi-metallic surgical instruments manufactured from shape memory alloys
Freiburg/Brsg., 2014
Baumeister, J.; Weise, J.; Hirtz, E.; Höhne, K.; Hohe, J.:
Applications of aluminum hybrid foam sandwiches in battery housings for electric vehicles
(International Conference on Porous Metals and Metallic Foams (Metfoam) <8, 2013, Raleigh>)
In: Procedia Materials Science, Vol.4 (2014), pp.317-321
urn:nbn:de:0011-n-3181643
Baumeister, Joachim; Weise, J.; Hirtz, Eva-Maria; Höhne, Klaus; Hohe, J.:
Applications of aluminium hybrid foam sandwiches in battery housings for electric vehicles
In: Materialwissenschaft und Werkstofftechnik, Vol.45 (2014), No.12, pp.1099-1107
urn:nbn:de:0011-n-3243159
Beckmann, C.; Hohe, J.:
Effects of material uncertainty in the structural response of metal foam core sandwich beams
In: Composite structures, Vol.113 (2014), pp.382-395
urn:nbn:de:0011-n-3019772
Beckmann, C.; Hohe, J.:
Numerical prediction of disorder effects in solid foams using a probabilistic homogenization scheme
In: Mechanics of materials, Vol.78 (2014), pp.22-43
urn:nbn:de:0011-n-3517969
Böhme, W.; Lienhard, J.; Memhard, D.:
Characterisation and modeling of adhesives for steel joints under crash loading situations
(International Conference on Impact Loading of Lightweight Structures (ICILLS ) <4, 2014, Cape Town>)
In: 4th International Conference on Impact Loading of Lightweight Structures, ICILLS 2014. Papers. Online rescource: 12-16 January 2014, Cape Town, South Africa, 4 pp.
Braun, D.; Greiner, C.; Schneider, J.; Gumbsch, P.:
Efficiency of laser surface texturing in the reduction of friction under mixed lubrication
In: Tribology international, Vol.77 (2014), pp.142-147
urn:nbn:de:0011-n-3019414
Breinlinger, T.; Kraft, T.:
A simple method for simulating the coffee stain effect
In: Powder Technology, Vol.256 (2014), pp.279-284
urn:nbn:de:0011-n-2872863
Casajús, P.; Winzer, N.:
Intergranular stress corrosion crack propagation in rolled AZ31 Mg alloy
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.602 (2014), pp.58-67
urn:nbn:de:0011-n-2873012
Cui, K.; Mali, K.S.; Ivasenko, O.; Wu, D.; Feng, X.; Walter, M.; Müllen, K.; Feyter, S. de; Mertens, S.F.L.:
Squeezing, then stacking: From breathing pores to three-dimensional ionic self-assembly under electrochemical control
In: Angewandte Chemie. International edition, Vol.53 (2014), No.47, pp.12951-12954
Dickel, D. E.; Schulz, K.; Schmitt, S.; Gumbsch, P.:
A continuum formulation of stress correlations of dislocations in two dimensions
In: Technische Mechanik, Vol.34 (2014), No.3-4, pp.205–212
Fliegener, S.; Luke, M.; Gumbsch, P.:
3D microstructure modeling of long fiber reinforced thermoplastics
In: Composites science and technology, Vol.104 (2014), pp.136-145
urn:nbn:de:0011-n-3195993
Fromm, A.; Trondl, A.; Strecker, H.; Krappitz, M.; Thissen, D.; Kübler, R.:
Aging-effects of polymeric encapsulation on the mechanical characteristics of solar panels and embedded components
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <29, 2014, Amsterdam>)
In: Bokhoven, T.P.: 29th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2014: Proceedings of the international conference held in Amsterdam, The Netherlands, 22 - 26 September 2014, DVD. München: WIP, 2014, pp. 3121-3125
urn:nbn:de:0011-n-3752718
Gumbsch, P.; Syha, M.; Lödermann, B.; Trenkle, A.; Graff, A.:
Non-destructive evaluation of 3D microstructure evolution during sintering of strontium titanate
(International Symposium on Advanced Microscopy and Theoretical Calculations (AMTC) <4, 2014, Hamamatsu>)
In: International journal of advanced microscopy and theoretical calculations : AMTC Letters, (2014), Special Issue 2014, pp.80-81
Haarman, C.J.W.; Hekman, E.E.G.; Augenstein, E.; Helm, D.; Sketchley, P.; Koopman, H.F.J.M.:
Design of a crevice-free bi-metallic intramedullary reamer
(Design of Medical Devices Conference Europe <2014, Delft>)
In: University of Technology of Delft: Design of Medical Devices Conference DCM Europe 2014. Programme and abstracts: Europe Edition, October 22-24, 2014. Delft: Delft University of Technology, 2014, pp. 118-119
Hardenacke, V.; Hohe, J.:
Improved numerical determination of the effective stress within the framework of local approach cleavage models
(European Conference on Fracture (ECF) <20, 2014, Trondheim>)
In: Procedia Materials Science, Vol.3 (2014), pp.378-384
Hardenacke, V.; Farajian, M.; Siegele, D.:
Simulation of the high frequency hammer peening process for improving the fatigue performance of welded joints
(International Conference on Shot Peening (ICSP) <12, 2014, Goslar>)
In: Wagner, L.: 12th International Conference on Shot Peening, ICSP12. Proceedings: Goslar, Germany, September 15-18, 2014. Krakau: Drukarnia GS, 2014, pp. 359-364
Hashibon, A.; Gurr, M.; Polfer, P.; Burmeister, F.; Kraft, T.:
Computational design of weitting and spreading behaviour for enhanced in-vitro-diagnostic applications
(International Conference on MicroFluidic Handling Systems (MFHS) <2, 2014, Freiburg>)
In: Koltay, P.: MFHS 2014. Proceedings: 2nd International Conference on MicroFluidic Handling Systems, 8.-10. October 2014, University of Freiburg, Germany. Freiburg/Breisgau, 2014, pp. 177-180
Hassan, M.; Walter, M.; Moseler, M.:
Interactions of polymers with reduced graphene oxide: van der Waals binding energies of benzene on graphene with defects
In: Physical chemistry, chemical physics : PCCP, Vol.16 (2014), No.1, pp.33-37
Kadic, M.; Bückmann, T.; Schittny, R.; Gumbsch, P.; Wegener, M.:
Pentamode metamaterials with independently tailored bulk modulus and mass density
In: Physical review applied, Vol.2 (2014), No.5, Art.054007, 7 pp.
Kauzlaric, D.; Dynowski, M.; Pastewka, L.; Greiner, A.; Korvink, J.G.:
SYMPLER: SYMbolic ParticLE simulatoR with grid-computing interface
In: Computer physics communications, Vol.185 (2014), No.3, pp.1085-1099
urn:nbn:de:0011-n-2871750
Koplin, C.; Silva Rodriguez, G. V. da; Jaeger, R.:
Multiaxial strength and stress forming behavior of four light-curable dental composites
In: Journal of research and practice in dentistry, Vol.2014 (2014), Art.396766, 14 pp.
urn:nbn:de:0011-n-4150024
Körner, W.; Elsässer, C.:
Density-functional theory study of stability and subgap states of crystalline and amorphous Zn-Sn-O
(International Symposia on Transparent Conductive Materials (TCM) <2012, Crete>)
In: Thin solid films, Vol.555 (2014), pp.81-86
urn:nbn:de:0011-n-2546756
Körner, W.; Urban, D.F.; Ramo, D.M.; Bristowe, P.D.; Elsässer, C.:
Prediction of subgap states in Zn- and Sn-based oxides using various exchange-correlation functionals
In: Physical Review. B, Vol.90 (2014), No.19, Art. 195142
urn:nbn:de:0011-n-3243362
Krugel, G.; Jenkner, F.; Moldovan, A.; Wolke, W.; Rentsch, J.; Preu, R.:
Investigations on the passivation mechanism of AlN:H and AlN:H-SiN:H stacks
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <4, 2014, S'Hertogenbosch>)
In: Energy Procedia, Vol.55 (2014), pp.797-804
urn:nbn:de:0011-n-3243974
Kunze, T.; Posselt, M.; Gemming, S.; Seifert, G.; Konicek, A.; Carpick, R.; Pastewka, L.; Moseler, M.:
Wear, plasticity, and rehybridization in tetrahedral amorphous carbon
In: Tribology letters, Vol.53 (2014), No.1, pp.119-126
urn:nbn:de:0011-n-2872985
Lagger, H.G.; Bierwisch, C.; Korvink, J.G.; Moseler, M.:
Discrete element study of viscous flow in magnetorheological fluids
In: Rheologica Acta, Vol.53 (2014), No.5-6, pp.417-443
urn:nbn:de:0011-n-3015721
Lin, Y.-S.; Mrovec, M; Vitek, V.:
A new method for development of bond-order potentials for transition bcc metals
In: Modelling and simulation in materials science and engineering, Vol.22 (2014), No.3, Art.034002, 22 pp.
Maier, G.; Hübsch, O.; Riedel, H.; Somsen, C.; Klöwer, J.; Mohrmann, R.:
Cyclic plasticity and lifetime of the nickel-based alloy C-263: Experiments, models and component simulation
(European Symposium on Superalloys and their Applications (EUROSUPERALLOYS) <2, 2014, Giens>)
In: Guedou, J.Y.: 2nd European Symposium on Superalloys and their Applications, EUROSUPERALLOYS 2014: Giens, France, 12 - 16 May 2014. Les Ulis: EDP Sciences, 2014. (MATEC Web of Conferences 14), Art. 16006, 6 pp.
Marichal, C.; Srivastava, K.; Weygand, D.; Petegem, S. van; Grolimund, D.; Gumbsch, P.; Swygenhoven, H. van:
Origin of anomalous slip in tungsten
In: Physical review letters, Vol.113 (2014), No.2, Art. 025501
urn:nbn:de:0011-n-3015190
Oesterlin, H.; Maier, G.:
Numerical assessment of thick walled power plant components under creep fatigue load with advanced models for deformation and lifetime
In: Materials at high temperatures, Vol.31 (2014), No.4, pp.364-369
urn:nbn:de:0011-n-3243506
Paul, Hanna:
Bewertung von langfaserverstärkten Kunststoff-Metall-Hybridverbunden auf der Basis des Verformungs- und Versagensverhaltens
Stuttgart: Fraunhofer Verlag, 2014
(Fraunhofer IWM Forschungsberichte 2)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2013
ISBN 3-8396-0765-5
ISBN 978-3-8396-0765-7
urn:nbn:de:0011-n-3035286
Pfeiffer, W.; Reisacher, E.; Windisch, M.; Kahnert, M.:
The effect of specimen size on residual stresses in friction stir welded aluminum components
(European Conference on Residual Stresses (ECRS) <9, 2014, Troyes>)
In: François, M.: Residual stresses IX. Selected, peer reviewed papers from the 9th European Conference on Residual Stresses, ECRS 2014: July 7-10, 2014, Troyes, France. Pfaffikon: TTP, 2014. (Advanced materials research 996), pp. 445-450
urn:nbn:de:0011-n-3321287
Pogodina, N.V.; Amann, T.; Dold, C.; Metwalli, E.; Müller-Buschbaum, P.; Kailer, A.; Friedrich, C.:
Triborheology and orientational dynamics of ionic liquid crystals
In: Journal of molecular liquids, Vol.192 (2014), pp.118-126
urn:nbn:de:0011-n-3014101
Preußner, J.; Oeser, S.; Pfeiffer, W.; Temmler, A.; Willenborg, E.:
Microstructure and residual stresses of laser structured surfaces
(European Conference on Residual Stresses (ECRS) <9, 2014, Troyes>)
In: François, M.: Residual stresses IX. Selected, peer reviewed papers from the 9th European Conference on Residual Stresses, ECRS 2014: July 7-10, 2014, Troyes, France. Pfaffikon: TTP, 2014. (Advanced materials research 996), pp. 568-573
Schlüter, B.; Mülhaupt, R.; Kailer, A.:
Synthesis and tribological characterization of stable dispersions of thermally reduced graphite oxide
In: Tribology letters, Vol.53 (2014), No.1, pp.353-363
urn:nbn:de:0011-n-2872793
Schröder, C.; Renz, A.; Koplin, C.; Kailer, A.:
Assessment of low-temperature degradation of Y-TZP ceramics based on Raman-spectroscopic analysis and hardness indentation
In: Journal of the European Ceramic Society, Vol.34 (2014), No.16, pp.4311-4319
urn:nbn:de:0011-n-3195967
Schulz, K.; Dickel, D.; Schmitt, S.; Sandfeld, S.; Weygand, D.; Gumbsch, P.:
Analysis of dislocation pile-ups using a dislocation-based continuum theory
In: Modelling and simulation in materials science and engineering, Vol.22 (2014), No.2, Art. 025008, 15 pp.
urn:nbn:de:0011-n-2871607
Senn, M; Link, N.; Pollak, J.; Lee, J.H.:
Reducing the computational effort of optimal process controllers for continuous state spaces by using incremental learning and post-decision state formulations
In: Journal of process control, Vol.24 (2014), No.3, pp.133143
urn:nbn:de:0011-n-2872901
Sun, D.-Z.; Ockewitz, A.; Falkinger, G.; Böhme, W.:
Characterization and modeling of crash behavior of thick-walled aluminum profiles
(International Conference on Impact Loading of Lightweight Structures (ICILLS ) <4, 2014, Cape Town>)
In: 4th International Conference on Impact Loading of Lightweight Structures, ICILLS 2014. Papers. Online rescource: 12-16 January 2014, Cape Town, South Africa, 4 pp.
Tritschler, M.; Butz, A.; Helm, D.; Falkinger, G.; Kiese, J.:
Experimental analysis and modeling of the anisotropic response of titanium alloy Ti-X for quasi-static loading at room temperature
In: International journal of material forming, Vol.7 (2014), No.3, pp.259-273
urn:nbn:de:0011-n-2550405
Tritschler, Matthias:
Modellierung und Simulation des Umformverhaltens von Titan und nichtrostendem Edelstahl
Stuttgart: Fraunhofer Verlag, 2014
(Fraunhofer IWM Forschungsberichte 1)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2013
ISBN 3-8396-0735-3
ISBN 978-3-8396-0735-0
urn:nbn:de:0011-n-2977406
Tutyshkin, N.; Müller, W.H.; Wille, R.; Zapara, M.:
Strain-induced damage of metals under large plastic deformation: Theoretical framework and experiments
In: International Journal of Plasticity, Vol.59 (2014), pp.133-151
urn:nbn:de:0011-n-3003193
Varfolomeev, I.; Burdack, M.; Moroz, S.; Siegele, D.; Kadau, K.:
Fatigue crack growth rates and paths in two planar specimens under mixed mode loading
(International Conference on "Crack Paths" (CP) <4, 2012, Gaeta>)
In: International journal of fatigue, Vol.58 (2014), pp.12-19
urn:nbn:de:0011-n-2547327
Winzer, N.; Mrovec, M.:
Multiscale approaches to hydrogen-assisted degradation of metals
In: JOM. The journal of the Minerals, Metals & Materials Society, Vol.66 (2014), No.8, pp.1366-1367
urn:nbn:de:0011-n-3071262
Zapara, M.; Augenstein, E.; Helm, D.:
Prediction of damage in cold bulk forming processes
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <85, 2014, Erlangen>)
In: Proceedings in applied mathematics and mechanics. PAMM, (2014), pp.1037-1040
Zhang, X.; Schneider, R.; Müller, E.; Mee, M.; Meier, S.; Gumbsch, P.; Gerthsen, D.:
Electron microscopic evidence for a tribologically induced phase transformation as the origin of wear in diamond
In: Journal of applied physics, Vol.115 (2014), No.6, Art.063508
Zhang, X.; Gumbsch, P. (Betreuer) :
TEM and STEM/EELS Studies of Diamond-Like Carbon (DLC) Films and Diamond Films
Karlsruhe, Inst. für Technologie (KIT), Diss., 2014
Ziegler, J.; Haschke, J.; Käsebier, T.; Korte, L.; Sprafke, A.N.; Wehrspohn, R.B.:
Influence of black silicon surfaces on the performance of back-contacted back silicon heterojunction solar cells
In: Optics Express, Vol.22 (2014), No.21, pp.A1469-A1476
Ziegler, T.; Kraft T.:
Functionally graded materials with a soft surface for improved indentation resistance: Layout and corresponding design principles
In: Computational materials science, Vol.86 (2014), pp.88-92
urn:nbn:de:0011-n-2872663
Amann, T.; Dold, C.; Kailer, A.:
Complex fluids in tribology to reduce friction: Mesogenic fluids, ionic liquids and ionic liquid crystals
(Leeds-Lyon Symposium on Tribology <39, 2012, Leeds>)
In: Tribology international, Vol.65 (2013), Special Issue "Great Challenges in Tribology", pp.3-12
urn:nbn:de:0011-n-2549426
Bier, M.; Sommer, S.:
Simplified modeling of self-piercing riveted joints for crash simulation with a modified version of *CONSTRAINED INTERPOLATION SPOTWELD: Presentation held at 9th European LS-DYNA Conference 2013, Manchester
(European LS-DYNA Conference <9, 2013, Manchester>)
2013
Bitzek, E.; Gumbsch, P.:
Mechanisms of dislocation multiplication at crack tips
In: Acta Materialia, Vol.61 (2013), No.4, pp.1394-1403
urn:nbn:de:0011-n-2364633
Borchers, Kirsten; Bierwisch, Claas; Engelhardt, Sascha; Graf, Careen; Hoch, Eva; Jaeger, Raimund; Kluger, Petra; Krüger, Hartmut; Meyer, Wolfdietrich; Novosel, Esther; Refle, Oliver; Schuh, Christian; Seiler, Nadine; Tovar, Günter E.M.; Wegener, Michael; Ziegler, Tobias:
Biocompatible elastomers for 3D biomaterials by additive manufacturing
(Meeting "Meet the Expert" <2013, Interlaken>)
In: European cells & materials. Online journal, Vol.26 (2013), Supplement 1, pp.1
Breinlinger, T.; Polfer, P.; Hashibon, A.; Kraft, T.:
Surface tension and wetting effects with smoothed particle hydrodynamics
In: Journal of computational physics, Vol.243 (2013), pp.14-27
urn:nbn:de:0011-n-2547844
Burget, S.; Sommer, S.:
Modeling of deformation and failure behavior of dissimilar resistance spot welded joints under shear, axial and combined loading conditions
(International Conference on Fracture (ICF) <13, 2013, Beijing>)
In: Yu, S.: 13th International Conference on Fracture, ICF 2013. Proceedings. CD-ROM: June 16–21, 2013, Beijing, China. Beijing, 2013, pp. 1589-1600
Chen, Z.:
Modelling the plastic deformation of iron
Karlsruhe: KIT Scientific Publishing, 2013
(Schriftenreihe des Instituts für Angewandte Materialien 15)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
ISBN 978-3-86644-968-8
Chen, Z.M.; Mrovec, M.; Gumbsch, P.:
Atomistic aspects of 1/2(1 1 1) screw dislocation behavior in alpha-iron and the derivation of microscopic yield criterion
In: Modelling and simulation in materials science and engineering, Vol.21 (2013), No.5, Art. 055023, 18 pp.
urn:nbn:de:0011-n-2646118
Drebov, N.; Martinez-Limia, A.; Kunz, L.; Gola, A.; Shigematsu, T.; Eckl, T.; Gumbsch, P.; Elsässer, C.:
Ab initio screening methodology applied to the search for new permanent magnetic materials
In: New journal of physics. Online journal, Vol.15 (2013), Art. 125023, 25 pp.
Eichel, R.-A.; Erünal, E.; Jakes, P.; Körbel, S.; Elsässer, C.; Kungl, H.; Acker, J.; Hoffmann, M.J.:
Interactions of defect complexes and domain walls in CuO-doped ferroelectric (K,Na)NbO3
In: Applied Physics Letters, Vol.102 (2013), No.24, Art. 242908, 5 pp.
Fromm, A.; Trondl, A.; Strecker, H.; Habedank, M.; Rees, F.; Krappitz, M.; Kübler, R.:
In-field eigen oscillation-measurement for detection of UV-induced EVA-degradation
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <28, 2013, Paris>)
In: Mine, A.: 28th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2013. Proceedings. DVD-ROM: 30 September to 04 October 2013, Paris, France. München: WIP-Renewable Energies, 2013, pp. 3131-3134
urn:nbn:de:0011-n-4422723
Garesci, F.; Fliegener, S.:
Young's modulus prediction of long fiber reinforced thermoplastics
In: Composites science and technology, Vol.85 (2013), pp.142-147
urn:nbn:de:0011-n-2672702
Grotjahn, T.; Aslanbas, Ö.; Mee, M.; König, M.; Meier, S.:
Plasma parameter investigation during plasma-enhanced chemical vapor deposition of silicon-containing diamond-like carbon films
(International Conference on Metallurgical Coatings and Thin Films (ICMCTF) <40, 2013, San Diego/Calif.>)
In: Surface and coatings technology, Vol.237 (2013), pp.126-134
urn:nbn:de:0011-n-2819852
Haller, S.:
Gestaltfindung: Untersuchungen zur Kraftkegelmethode
Karlsruhe: KIT Scientific Publishing, 2013
(Schriftenreihe des Instituts für Angewandte Materialien 27)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2013
ISBN 3-7315-0050-7
ISBN 978-3-7315-0050-6
Hartrott, P. von; Cueva, A.; Ohmenhäuser, F.:
Lifetime estimation of high-temperature components made of ferritic sheet metal
In: MTZ worldwide, Vol.74 (2013), No.10, pp.66-71
urn:nbn:de:0011-n-3161912
Hoeche, T.; Weidenkaff, A.; Terasaki, I.:
Progress in synthesis and characterization of energy materials. Preface
In: Journal of Materials Science : JMS, Vol.48 (2013), No.7, pp.2743-2744
urn:nbn:de:0011-n-2364277
Hohe, J.:
Effect of core and face sheet anisotropy on the natural frequencies of sandwich shells with composite faces
In: International Journal of Composite Materials, Vol.3 (2013), No.6B, pp.40-52
urn:nbn:de:0011-n-2818167
Jamin, C.; Rasp, T.; Kraft, T.; Guillon, O.:
Constrained sintering of alumina stripe patterns on rigid substrates: Effect of stripe geometry
In: Journal of the European Ceramic Society, Vol.33 (2013), No.15-16, pp.3221-3230
urn:nbn:de:0011-n-2641372
Järvi, T.; Mayrhofer, L.; Polvi, J.; Nordlund, K.; Pastewka, L.; Moseler, M.:
Adaptive molecular decomposition: Large-scale quantum chemistry for liquids
In: The Journal of chemical physics, Vol.138 (2013), No.10, Art.104108, 10 pp.
urn:nbn:de:0011-n-2364215
Khader, I.; Renz, A.; Kailer, A.; Haas, D.:
Thermal and corrosion properties of silicon nitride for copper die casting components
In: Journal of the European Ceramic Society, Vol.33 (2013), No.3, pp.593-602
urn:nbn:de:0011-n-2364371
Kohal, R.J.; Bächle, M.; Att, W.; Chaar, S.; Altmann, B.; Renz, A.; Butz, F.:
Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials
In: Dental materials, Vol.29 (2013), No.7, pp.763-776
urn:nbn:de:0011-n-2546918
Körbel, S.; Elsässer, C.; Hauff, E. von :
Atomistic modeling of Cu doping in the lead-free ferroelectric potassium sodium niobate
Freiburg/Brsg., Univ., Diss., 2012
Körner, W.; Urban, D.F.; Elsässer, C.:
Origin of subgap states in amorphous In-Ga-Zn-O
In: Journal of applied physics, Vol.114 (2013), No.16, Art. 163704, 6 pp.
urn:nbn:de:0011-n-2818197
Korres, S.:
On-Line topographic measurements of lubricated metallic sliding surfaces: A case study of lubricated buried interfaces
Karlsruhe: KIT Scientific Publishing, 2013
(Schriftenreihe des Instituts für Angewandte Materialien 20)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
ISBN 3-7315-0017-5
ISBN 978-3-7315-0017-9
Köster, U.; Jaeger, R.; Bardts, M.; Wahnes, C.; Büchner, H.; Kühn, K.-D.; Vogt, S.:
Creep and fatigue behavior of a novel 2-component paste-like formulation of acrylic bone cements
In: Journal of materials science. Materials in medicine, Vol.24 (2013), No.6, pp.1395-1406
urn:nbn:de:0011-n-2548093
Krause, M.; Wehrspohn, R.B.; Hanke, M.; Leipner, H.S. :
Ortsaufgelöste Bestimmung von Gitterverzerrungen in Silizium-Nanostrukturen mittels Elektronenrückstreubeugung
Halle, Univ., Diss., 2013
Lagger, H.; Bierwisch, C.; Moseler, M.:
MRF in a plate-plate magnetorheometer: Numerical insight into the particle-wall interface
In: Journal of physics. Conference series, Vol.412 (2013), No.1, Art.012020
urn:nbn:de:0011-n-2364385
Landes, C.; Ballon, A.; Ghanaati, S.; Ebel, D.; Ulrich, D.; Spohn, U.; Heunemann, U.; Sader, R.; Jaeger, R.:
Evaluation of the fatigue performance and degradability of resorbable PLDLLA-TMC osteofixations
In: Open Biomedical Engineering Journal, Vol.7 (2013), pp.133-146
Lenz, L.; Urban, D.F.; Bercioux, D.:
Rashba spin-orbit interaction in graphene armchair nanoribbons
In: The European physical journal. B, Condensed matter physics, Vol.86 (2013), No.12, Art. 502
urn:nbn:de:0011-n-2753332
Li, X.P.; Xiao, Y.J.; Yan, C.L.; Song, J.W.; Talalaev, V.; Schweizer, S.L.; Piekielska, K.; Sprafke, A.; Lee, J.H.; Wehrspohn, R.B.:
Fast electroless fabrication of uniform mesoporous silicon layers
In: Electrochimica Acta, Vol.94 (2013), pp.57-61
urn:nbn:de:0011-n-2418368
Lyashenko, I. A.; Pastewka, L.; Persson, B. N. J.:
Comment on friction between a viscoelastic body and a rigid surface with random self-affine roughness
In: Physical review letters, Vol.111 (2013), No.18, pp.189401
urn:nbn:de:0011-n-2872812
Lyashenko, I.A.; Pastewka, L.; Persson, B.N.J.:
On the validity of the method of reduction of dimensionality: Area of contact, average interfacial separation and contact stiffness
In: Tribology letters, Vol.52 (2013), No.2, pp.223-229
urn:nbn:de:0011-n-2643715
Maier, G.; Riedel, H.; Somsen, C.:
Cyclic deformation and lifetime of alloy 617B during isothermal low cycle fatigue
In: International journal of fatigue, Vol.55 (2013), pp.126-135
urn:nbn:de:0011-n-2546185
Menzer, K.C.; Wehrspohn, R.B.; Heinrich, G. :
Morphologie, Perkolations- und mechanisches Verhalten von schmelzegemischten isotaktischen Polypropylen-basierten/MWCNT-Kompositen
Halle, Univ., Diss., 2013
Metzger, M.; Nieweg, B.; Schweizer, C.; Seifert, T.:
Lifetime prediction of cast iron materials under combined thermomechanical fatigue and high cycle fatigue loading using a mechanism-based model
(International Workshop on Thermo-Mechanical Fatigue <2, 2011, Berlin>)
In: International journal of fatigue, Vol.53 (2013), pp.58-66
urn:nbn:de:0011-n-2067981
Metzger, M.; Seifert, T.:
On the exploitation of Armstrong-Frederik type nonlinear kinematic hardening in the numerical integration and finite-element implementation of pressure dependent plasticity models
In: Computational mechanics, Vol.52 (2013), No.3, pp.515-524
urn:nbn:de:0011-n-2550712
Naumann, F.; Brand, S.; Bernasch, M.; Tismer, S.; Czurratis, P.; Wünsch, D.; Petzold, M.:
Advanced characterization of glass frit bonded micro-chevron-test samples based on scanning acoustic microscopy
In: Microsystem Technologies, Vol.19 (2013), No.5, pp.689-695
urn:nbn:de:0011-n-2364392
Neubrand, A.; Dadda, J.; Mueller, E.; Perlt, S.; Höche, T.:
Spatially resolved thermal conductivity measurements using a thermoreflectance microprobe
In: Journal of Electronic Materials, Vol.42 (2013), No.7, pp.2165-2171
urn:nbn:de:0011-n-2546884
Olowojoba, Ganiu Babatunde:
Assessment of dispersion evolution of carbon nanotubes in shear-mixed epoxy suspensions by interfacial polarization measurement
Stuttgart: Fraunhofer Verlag, 2013
(Wissenschaftliche Schriftenreihe des ICT 55)
Zugl.: Karlsruhe, Univ., Diss., 2013
ISBN 3-8396-0584-9
ISBN 978-3-8396-0584-4
urn:nbn:de:0011-n-2563036
Pastewka, L.; Prodanov, N.; Lorenz, B.; Müser, M.H.; Robbins, M.O.; Persson, B.N.J.:
Finite-size scaling in the interfacial stiffness of rough elastic contacts
In: Physical Review. E, Vol.87 (2013), No.6, Art. 062809, 9 pp.
Pastewka, L.; Malola, S.; Moseler, M.; Koskinen, P.:
Li+ adsorption at prismatic graphite surfaces enhances interlayer cohesion
In: Journal of power sources, Vol.239 (2013), pp.321-325
urn:nbn:de:0011-n-2549369
Pastewka, L.; Klemenz, A.; Gumbsch, P.; Moseler, M.:
Screened empirical bond-order potentials for Si-C
In: Physical Review. B, Vol.87 (2013), No.20, Art. 205410, 12 pp.
urn:nbn:de:0011-n-2548975
Paxton, A.T.; Elsässer, C.:
Analysis of a carbon dimer bound to a vacancy in iron using density functional theory and a tight binding model
In: Physical Review. B, Vol.87 (2013), No.22, Art. 224110, 10 pp.
Rasp, T.; Kraft, T.; Riedel, H.:
Discrete element study on the influence of initial coordination numbers on sintering behaviour
In: Scripta materialia, Vol.69 (2013), No.11-12, pp.805-808
urn:nbn:de:0011-n-2641545
Rheinheimer, W.; Hoffmann, M.J.; Gumbsch, P. :
Zur Grenzflächenanisotropie von SrTiO3
Karlsruhe: KIT Scientific Publishing, 2013
(Schriftenreihe des Instituts für Angewandte Materialien 25)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2013
ISBN 978-3-7315-0027-8
Ropoport, L.; Moshkovich, A.; Perfilyev, V.; Lapsker, I.; Kugler, M.; Kailer, A.; Renz, A.; Hollstein, T.:
High temperature friction behavior of CrVxN coatings
In: Surface and coatings technology, Vol.238 (2013), pp.207-215
urn:nbn:de:0011-n-2872736
Scherge, M.; Sarembe, S.; Kiesow, A.; Petzold, M.:
Dental tribology at the microscale
In: Wear, Vol.297 (2013), No.1-2, pp.1040-1044
urn:nbn:de:0011-n-2364688
Scherge, M.; Böttcher, R.; Richter, M.; Gurgel, U.:
High-speed ice friction experiments under lab-conditions: On the influence of speed and normal force
In: ISRN Tribology, Vol.2013 (2013), Art.703202, 6 pp.
urn:nbn:de:0011-n-2364503
Scherge, M.; Kramlich, J.; Böttcher, R.; Hoppe, T.:
Running-in due to material transfer of lubricated steel/PA46 (aliphatic polyamide) contacts
In: Wear, Vol.301 (2013), No.1-2, pp.758-762
urn:nbn:de:0011-n-2614059
Schulze, M.; Bercioux, D.; Urban, D.F.:
Adiabatic pumping in the quasi-one-dimensional triangle lattice
In: Physical Review. B, Vol.87 (2013), No.2, Art. 024301, 6 pp.
urn:nbn:de:0011-n-2343959
Srivastava, K.; Gröger, R.; Weygand, D.; Gumbsch, P.:
Dislocation motion in tungsten: Atomistic input to discrete dislocation simulations
In: International Journal of Plasticity, Vol.47 (2013), pp.126-142
urn:nbn:de:0011-n-2545701
Steier, V.F.; Koplin, C.; Kailer, A.:
Influence of pressure-assisted polymerization on the microstructure and strength of polymer-infiltrated ceramics
In: Journal of Materials Science : JMS, Vol.48 (2013), No.8, pp.3239-3247
urn:nbn:de:0011-n-2343384
Uhlmann, E.; Borsoi Klein, T.; Schweitzer, L.; Neubrand, A.:
NC-form grinding of carbon fibre reinforced silicon carbide composite
(Asia-Pacific Conference on Engineering Plasticity and its Applications (AEPA) <11, 2012, Singapore>)
In: Lu, G. (Ed.) et al.: Advances in engineering plasticity XI: Selected peer reviewed papers from the 11th Asia-Pacific Conference on Engineering Plasticity and its Applications (AEPA 2012), December 5-7, 2012. Dürnten: Trans Tech Publications, 2013. (Key engineering materials 535-536), pp. 314-317
urn:nbn:de:0011-n-2388637
Wehd, C. von der; Lube, T.; Khader, I.; Kailer, A.; Degenhardt, U.; Berroth, K.:
Zyklische Ermüdung technischer Keramiken in wässrigen Medien
(Tagung Werkstoffprüfung <2013, Neu-Ulm>)
In: Christ, H.-J.: Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Tagung Werkstoffprüfung 2013, 28. bis 29. November 2013, Neu-Ulm, Deutschland. Düsseldorf: Verlag Stahleisen, 2013, pp. 379-384
urn:nbn:de:0011-n-2873308
Wessely, P. J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.:
In situ CCVD grown graphene transistors with ultra-high on-off-current ratio in silicon CMOS compatible processing
In: Advances in science and technology, Vol.77 (2013), pp.258-265
urn:nbn:de:0011-n-2364534
Wessely, P.J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.:
Transfer-free grown bilayer graphene transistors for digital applications
In: Solid-State Electronics, Vol.81 (2013), pp.86-90
Wijk, M. M. van; Dienwiebel, M.; Frenken, J. W. M.; Fasolino, A.:
Superlubric to stick-slip sliding of incommensurate graphene flakes on graphite
In: Physical Review. B, Vol.88 (2013), No.23, pp.235423
Winzer, N.; Khader, I.:
Hydrogen diffusion and trapping in bodies undergoing rolling contact
In: Wear, Vol.303 (2013), No.1-2, pp.451-458
urn:nbn:de:0011-n-2547893
Zapara, M.; Tutyshkin, N.; Müller, W.H.:
Growth and closure of voids in metals at negative stress triaxialities
(International Conference on Material Forming (ESAFORM) <16, 2013, Aveiro>)
In: Alves de Sousa, Ricardo: The Current State-of-the-Art on Material Forming: Selected, peer reviewed papers from the 16th ESAFORM Conference on Material Forming, April 22-24, 2013, Aveiro, Portugal. Dürnten: Trans Tech Publications, 2013. (Key engineering materials 554-557), pp. 1125-1132
urn:nbn:de:0011-n-2645755
Adhikari, R.; Brostow, W.; Datashvili, T.; Henning, S.; Menard, B.; Menard, K.P.; Michler, G.H.:
Effect of surfactant treated boehmite nanoparticles on properties of block copolymers
In: Materials research innovations, Vol.16 (2012), No.1, pp.19-24
urn:nbn:de:0011-n-1987061
Altmann, F.; Petzold, M.:
Emerging techniques for 3-D integrated system-in-package failure diagnostics
In: Electronic device failure analysis : EDFAS, Vol.14 (2012), No.2, pp.14-20
urn:nbn:de:0011-n-2066074
Amann, T.; Dold, C.; Kailer, A.:
Rheological characterization of ionic liquids and ionic liquid crystals with promising tribological performance
In: Soft matter, Vol.8 (2012), No.38, pp.9840-9846
urn:nbn:de:0011-n-2170738
Bachurin, D.V.; Gumbsch, P.:
Elastic and plastic anisotropy after straining of nanocrystalline palladium
In: Physical Review. B, Vol.85 (2012), No.8, Art.085407, 9 pp.
urn:nbn:de:0011-n-1986917
Bakowskie, R.; Kesser, G.; Richter, R.; Lausch, D.; Eidner, A.; Clemens, P.; Petter, K.:
Fast method to determine the structural defect density of 156 x 156 mm2 Mc-Si wafers
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.179-184
urn:nbn:de:0011-n-2364584
Bartel, T.; Lauer, K.; Heuer, M.; Kaes, M.; Walerysiak, M.; Gibaja, F.; Lich, J.; Bauer, J.; Kirscht, F.:
The effect of Al and Fe doping on solar cells made from compensated silicon
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.45-52
Beckmann, C.; Hohe, J.:
Assessment of material uncertainties in solid foams based on local homogenization procedures
(International Symposium on the Mechanics of Liquid and Solid Foams <2011, Austin/Tex.>)
In: Kyriakides, S.: Mechanics of Liquid and Solid Foams: Held at the University of Texas at Austin, May 8 - 13, 2011; International symposium on the Mechanics of Liquid and Solid Foams; Sixteen papers. Amsterdam: Elsevier, 2012. (International journal of solids and structures 49.2012, Nr.19/20), pp. 2807-2822
urn:nbn:de:0011-n-2066847
Bier, M.; Sommer, S.:
Advanced investigations on a simplified modeling method of self-piercing riveted joints for crash simulation: Presentation held at 11. LS-DYNA Forum, 9. - 10. Oktober 2012, Ulm
(LS-DYNA Forum <11, 2012, Ulm>)
2012
Böhme, W.;; Reissig, L.:
Neue, höchstfeste ADI-Werkstoffe für den Automobilbau: Eignungsuntersuchung unter Missbrauchsoder Crashbelastung
In: Gießerei, Vol.99 (2012), No.7, pp.34-40
Brand, M.; Hohe, J.; Siegele, D.:
Numerical investigations on the residual stress field in a cladded plate due to the cladding process
In: Welding in the world, Vol.56 (2012), No.5-6, pp.107-113
urn:nbn:de:0011-n-2116933
Brand, M.C.; Gumbsch, P. :
Weiterentwicklung von Methoden in der numerischen Schweißsimulation
Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
Burget, S.; Sommer, S.:
Characterization and modeling of fracture behavior of spot welded joints in hot-stamped ultra-high strength steels: Presentation held at 11. LS-DYNA Forum, 9. - 10. Oktober 2012, Ulm
(LS-DYNA Forum <11, 2012, Ulm>)
2012
Butenuth, A.; Moras, G.; Schneider, J.; Koleini, M.; Köppen, S.; Meißner, R.; Wright, L.B.; Walsh, T.R.; Ciacchi, L.C.:
Ab initio derived force-field parameters for molecular dynamics simulations of deprotonated amorphous-SiO 2/water interfaces
In: Physica status solidi. B, Vol.249 (2012), No.2, pp.292-305
urn:nbn:de:0011-n-2069354
Gall, Monika; Gumbsch, Peter (Betreuer) :
Experimentelle und numerische Untersuchungen zur Lebensdauer von flächigen piezokeramischen Sensor-, Aktor-Modulen
Karlsruhe: KIT-Bibliothek, 2012
Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
Gerlach, J.W.; Ivanov, T.; Neumann, L.; Höche, T.; Hirsch, D.; Rauschenbach, B.:
Epitaxial GaN films by hyperthermal ion-beam nitridation of Ga droplets
In: Journal of applied physics, Vol.111 (2012), No.11, Art.113521, 10 pp.
urn:nbn:de:0011-n-2364406
Großer, S.; Lausch, D.; Werner, M.; Swatek, S.; Mergner, M.; Naumann, V.; Hagendorf, C.:
Shunt analysis in solar cells - electro-optical classification and high resolution defect diagnostics
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.7-12
Heierli, J.; Gumbsch, P.; Sherman, D.:
Anticrack-type fracture in brittle foam under compressive stress
In: Scripta materialia, Vol.67 (2012), No.1, pp.96-99
urn:nbn:de:0011-n-2116351
Hohe, J.; Hardenacke, V.:
Analysis of uncertainty effects due to microstructural disorder in cellular or porous materials
In: International Journal of Solids and Structures, Vol.49 (2012), No.7-8, pp.1009-1021
urn:nbn:de:0011-n-2067426
Hohe, J.; Hardenacke, V.; Fascio, V.; Girard, Y.; Baumeister, J.; Stöbener, K.; Weise, J.; Lehmhus, D.; Pattofatto, S.; Zeng, H.; Zhao, H.; Calbucci, V.; Rustichelli, F.; Fiori, F.:
Numerical and experimental design of graded cellular sandwich cores for multi-functional aerospace applications
In: Materials and design, Vol.39 (2012), pp.20-32
urn:nbn:de:0011-n-2062448
Hohe, J.; Beckmann, C.:
Probabilistic homogenization of hexagonal honeycombs with perturbed microstructure
In: Mechanics of materials, Vol.49 (2012), pp.13-29
urn:nbn:de:0011-n-2064099
Järvi, T.T.; Nordlund, K.:
Sputtering of freestanding metal nanocrystals
(International Conference on Ion Beam Modification of Materials (IBMM) <17, 2010, Montreal>)
In: Nuclear instruments and methods in physics research, Section B. Beam interactions with materials and atoms, Vol.272 (2012), pp.66-69
urn:nbn:de:0011-n-1899858
Khader, I.; Kürten, D.; Kailer, A.:
A study on the wear of silicon nitride in rolling-sliding contact
In: Wear, Vol.296 (2012), No.1-2, pp.630-637
urn:nbn:de:0011-n-2364198
Kieback, B.; Noethe, M.; Grupp, R.; Banhart, J.; Rasp, T.; Kraft, T.:
Analysis of particle rolling and intrinsic rotations in copper powder during sintering
In: Journal of Materials Science : JMS, Vol.47 (2012), No.20, pp.7047-7055
Koitzsch, Matthias; Lewke, Dirk; Kaule, Felix; Oswald, Marcus; Schoenfelder, Stephan; Turek, Marko; Büchel, Andreas; Zühlke, Hans-Ulrich:
Thermal laser separation - damage-free and Kerfless cutting of wafers and solar cells
(International Workshop on Crystalline Silicon Solar Cells (CSSC) <6, 2012, Aix-les-Bains>)
In: Institut National de L'Energie Solaire -INES-: 6th International Workshop on Crystalline Silicon for Solar Cells, CSSC 2012: October 8-11, 2012, Aix-les-Bains, France. Aix-les-Bains, 2012, 4 pp.
urn:nbn:de:0011-n-2281062
Korres, S.; Feser, T.; Dienwiebel, M.:
In situ observation of wear particle formation on lubricated sliding surfaces
In: Acta Materialia, Vol.60 (2012), No.1, pp.420-429
urn:nbn:de:0011-n-1889013
Meißner, D.; Meyer, S.; Anspach, O.:
Enrichment of metal ions in virgin Si-surfaces
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.27-32
Merkle, L.; Sonner, M.; Petzold, M.:
Developing a model for the bond heel lifetime prediction of thick aluminium wire bonds
In: Soldering & surface mount technology, Vol.24 (2012), No.2, pp.127-134
urn:nbn:de:0011-n-2066925
Metzger, M.; Seifert, T.:
A mechanism-based model for LCF/HCF and TMF/HCF life prediction: Multiaxial formulation, finite-element implementation and application to cast iron
In: Technische Mechanik, Vol.32 (2012), No.2-5, pp.435-445
urn:nbn:de:0011-n-2364596
Naumann, V.; Otto, M.; Wehrspohn, R.B.; Werner, M.; Hagendorf, C.:
Interface and material characterization of thin ALD-Al2O3 layers on crystalline silicon
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.312-318
Pablos-Martín, A. de; Durán, A; Pascual, M. J.; Soria, S; Righini, G. C.; Ramírez, M. O.; Bausá, L. E.; Ristic, D.; Ferrari, M.; Höche, T.:
Transparent glass-ceramics: Crystallization mechanisms and optical properties
In: SPIE newsroom. Online journal, (2012), 4 pp.
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P.:
Bond order potentials for fracture, wear, and plasticity
In: MRS Bulletin, Vol.37 (2012), No.5, pp.493-503
urn:nbn:de:0011-n-2065821
Perlt, S.; Höche, T.; Dadda, J.; Müller, E.; Bauer Pereira, P.; Hermann, R.; Sarahan, M.; Pippel, E.; Brydson, R.:
Microstructure analyses and thermoelectric properties of Ag1-xPb18Sb1+yTe20
In: Journal of solid state chemistry, Vol.193 (2012), pp.58-63
urn:nbn:de:0011-n-2066684
Phan Van, T.; Böhlke, T. :
Modeling the mesoscopic and macroscopic deformation behavior of the ferritic stainless steel DC04
Karlsruhe: KIT Scientific Publishing, 2012
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
Rasp, T.; Jamin, C.; Wonisch, A.; Kraft, T.; Guillon, O.:
Shape distortion and delamination during constrained sintering of ceramic stripes: Discrete element simulations and experiments
In: Journal of the American Ceramic Society, Vol.95 (2012), No.2, pp.586-592
urn:nbn:de:0011-n-2069240
Rublack T.; Krause, S.; Schweizer, S.; Seifert, G.:
Increasing solar-cell efficiency by femtosecond laser microstructuring
In: SPIE newsroom. Online journal, (2012), 3 pp.
Rublack, T.; Schade, M.; Muchow, M.; Leipner, H.S.; Seifert, G.:
Proof of damage-free selective removal of thin dielectric coatings on silicon wafers by irradiation with femtosecond laser pulses
In: Journal of applied physics, Vol.112 (2012), No.2, Art.023521, 7 pp.
urn:nbn:de:0011-n-2227517
Sprafke, A. N.; Wehrspohn, R. B.:
Light trapping concepts for photon management in solar cells
In: Green, Vol.2 (2012), No.4, pp.177-187
urn:nbn:de:0011-n-2364628
Steudel, F.; Dyrba, M.; Schweizer, S.:
Fluorescent borate glass enhances cadmium telluride solar cells
In: SPIE newsroom. Online journal, (2012), 2 pp.
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P.:
Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
In: Scripta materialia, Vol.66 (2012), No.1, pp.1-4
urn:nbn:de:0011-n-1900522
Thormann, A.; Berthold, L.; Goring, P.; Lelonek, M.; Heilmann, A.:
Nanoporous aluminum oxide membranes for separation and biofunctionalization
(Euromembrane Conference <2012, London>)
In: Procedia Engineering, Vol.44 (2012), pp.1107-1111
Vogel, K.; Wuensch, D.; Uhlig, S.; Froemel, J.; Naumann, F.; Wiemer, M.; Gessner, T.:
Influence of test speed on the bonding strength of glass frit bonded wafers
(Youth Symposium on Experimental Solid Mechanics (YSESM) <11, 2012, Brasov/Romania>)
In: Tuns, I.: 11th Youth Symposium on Experimental Solid Mechanics, YSESM 2012. Book of Abstracts: 30th of May 2012 - 2nd of June 2012, Brasov, Romania. Brasov, 2012, pp. 100-101
Wessely, P.J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.:
Hysteresis of in situ CCVD grown graphene transistors
In: Electrochemical and solid state letters, Vol.15 (2012), No.4, pp.K31-K34
Wessely, P.J.; Wessely, F.; Birinci, E.; Beckmann, K.; Riedinger, B.; Schwalke, U.:
Silicon-CMOS compatible in-situ CCVD grown graphene transistors with ultra-high on/off-current ratio
In: Physica. E, Vol.44 (2012), No.7-8, pp.1132-1135
urn:nbn:de:0011-n-2067291
Wessely, P.J.; Wessely, F.; Birinci, E.; Schwalke, U.; Riedinger, B.:
Transfer-free fabrication of graphene transistors
In: Journal of vacuum science and technology B. Microelectronics and nanometer structures, Vol.30 (2012), No.3, Art.03D114, 5 pp.
urn:nbn:de:0011-n-2116873
Wohlfahrt, H.; Nitschke-Pagel, T.; Dilger, K.; Siegele, D.; Brand, M.; Sakkiettibutra, J.; Loose, T.:
Residual stress calculations and measurements: Review and assessment of the IIW round robin results
In: Welding in the world, Vol.56 (2012), No.9-10, pp.120-140
urn:nbn:de:0011-n-2233508
Amann, T.; Kailer, A.:
Analysis of the ultralow friction behavior of a mesogenic fluid in a reciprocating contact
In: Wear, Vol.271 (2011), No.9-10, pp.1701-1706
urn:nbn:de:0011-n-1895973
Bäcker, C.; Herrmann, M.; Hübert, C.; Koplin, C; Oberschmidt, D.; Uhlmann, E.; Renz, A.; Schulz, I.; Wacinski, M.:
Technologie zur Herstellung vollkeramischer Fräswerkzeuge: Abschlussbericht des InnoNet-Projekts "TechVolk". Förderkennzeichen BMWi 16IN0583-84 - 16IN0586
Berlin: Fraunhofer IPK, 2011
Bierwisch, C.; Kübler, R.; Kleer, G.; Moseler, M.:
Modelling of contact regimes in wire sawing with dissipative particle dynamics
In: Philosophical Transactions of the Royal Society of London. Series A, Vol.369 (2011), No.1945, pp.2422-2430
urn:nbn:de:0011-n-1811939
Borchers, Kirsten; Bierwisch, Claas; Engelhardt, Sascha; Graf, Careen; Hirth, Thomas; Hoch, Eva; Jaeger, Raimund; Kluger, Petra; Krüger, Hartmut; Meyer, Wolfdietrich; Novosel, Esther; Refle, Oliver; Schuh, Christian; Seiler, Nadine; Tovar, Günter E.M.; Wegener, Michael; Ziegler, Tobias:
Material- und Prozessentwicklung für die Herstellung kleinlumiger, verzweigter Gefäßsysteme mittels Inkjetdruck und Zweiphotonenpolymerisation
(Thüringer Grenz- und Oberflächentage (ThGOT) <7, 2011, Zeulenroda>)
In: Grünler, B.: 7. Thüringer Grenz- und Oberflächentage mit 1. Zukunftsarena Oberflächentechnik und 8. Thüringer Biomaterial-Kolloquium 2011. Tagungsband: Zeulenroda-Triebes, 13./15. September 2011; Plenarvorträge, Kurzvorträge, Posterzusammenfassungen. Jena: Innovent, 2011, pp. 309-310
urn:nbn:de:0011-n-1863573
Chen, Z.M.; Mrovec, M.; Gumbsch, P.:
Dislocation-vacancy interactions in tungsten
In: Modelling and simulation in materials science and engineering, Vol.19 (2011), No.7, Art. 074002, 14pp.
urn:nbn:de:0011-n-1891288
Dembski, S.; Rupp, S.; Milde, M.; Gellermann, C.; Dyrba, M.; Schweizer, S.; Batentschuk, M.; Osvet, A.; Winnacker, A.:
Synthesis and optical properties of luminescent core-shell structured silicate and phosphate nanoparticles
(Symposium K "Rare Earth Doped Materials for Optical Based Technologies" <2010, Strasbourg>)
In: Bettinelli, M.: Rare Earth Doped Materials for Optical Based Technologies Symposium K of the 2010 EMRS spring meeting EMRS 2010: Strasbourg, France, June 7 - 11, 2010. Amsterdam: Elsevier, 2011. (Optical materials 33.2011, Nr.7), pp. 1106-1110
urn:nbn:de:0011-n-1719479
Elsayed, M.; Krause-Rehberg, R.; Moutanabbir, O.; Anwand, W.; Richter, S.; Hagendorf, C.:
Cu diffusion-induced vacancy-like defects in freestanding GaN
In: New journal of physics. Online journal, Vol.13 (2011), January, Art. 013029, 13 pp.
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.:
An enhanced local approach model for the assessment of brittle fracture based on micromechanical investigations
(International Conference "Materials Structure and Micromechanics of Fracture" (MSMF) <6, 2010, Brno>)
In: Sandera, P.: Materials structure & micromechanics of fracture: Selected, peer reviewed papers from the 6th International Conference "Materials Structure & Micromechanics of Fracture (MSMF-6)", Brno, Czech Republic, June 28 - 30, 2010. Stafa-Zurich: Trans Tech Publications, 2011. (Key engineering materials 465), pp. 539-542
urn:nbn:de:0011-n-1725443
Heierli, J.; Birkeland, K.W.; Simenhois, R.; Gumbsch, P.:
Anticrack model for skier triggering of slab avalanches
In: Cold regions science and technology, Vol.65 (2011), No.3, pp.372-381
urn:nbn:de:0011-n-1725455
Helm, D.; Butz, A.; Raabe, D.; Gumbsch, P.:
Microstructure-based description of the deformation of metals: Theory and application
In: JOM. The journal of the Minerals, Metals & Materials Society, Vol.63 (2011), No.4, pp.26-33
urn:nbn:de:0011-n-1725434
Hohe, J.; Luckow, S.; Hardenacke, V.; Sguaizer, Y.; Siegele, D.:
Enhanced fracture assessment under biaxial external loads using small scale cruciform bending specimens
In: Engineering fracture mechanics, Vol.78 (2011), No.9, pp.1876-1894
urn:nbn:de:0011-n-1725335
Hormann, Christoph; Gumbsch, P. (Prüfer) :
Das Wachstum amorpher Kohlenstoffschichten auf Basis von Toluol
Karlsruhe, Inst. für Technologie (KIT), Diss., 2011
Jin, Z.H.; Dunham, S.T.; Gleiter, H.; Hahn, H.; Gumbsch, P.:
A universal scaling of planar fault energy barriers in face-centered cubic metals
In: Scripta materialia, Vol.64 (2011), No.7, pp.605-608
urn:nbn:de:0011-n-1725423
Kadkhodapour, J.; Butz, A.; Rad, S.Z.:
Mechanisms of void formation during tensile testing in a commercial, dual-phase steel
In: Acta Materialia, Vol.59 (2011), No.7, pp.2575-2588
urn:nbn:de:0011-n-1633917
Kadkhodapour, J.; Butz, A.; Ziaei-Rad, S.; Schmauder, S.:
A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model
In: International Journal of Plasticity, Vol.27 (2011), No.7, pp.1103-1125
urn:nbn:de:0011-n-1725281
Kailer, A.; Amann, T.; Krummhauer, O.; Herrmann, M.; Sydow, U.; Schneider, M.:
Influence of electric potentials on the tribological behaviour of silicon carbide
(International Conference on Wear of Materials (WOM) <18, 2011, Philadelphia/Pa.>)
In: Ludema, K.C.: 18th International Conference on Wear of Materials, WOM 2011: Philadelphia, USA 4 - 7 April 2011. Amsterdam: Elsevier, 2011. (Wear 271.2011, Nr.9/10), 1922-1927
urn:nbn:de:0011-n-1830988
Kauzlaric, D.; Pastewka, L; Meyer, H.; Heldele, R.; Schulz, M.; Weber, O.; Piotter, V.; Hausselt, J.; Greiner, A.; Korvink, J.G.:
Smoothed particle hydrodynamics simulation of shear-induced powder migration in injection moulding
In: Philosophical Transactions of the Royal Society of London. Series A, Vol.369 (2011), No.1944, pp.2320-2328
urn:nbn:de:0011-n-1812105
Khader, I.; Hashibon, A.; Albina, J.-M.; Kailer, A.:
Wear and corrosion of silicon nitride rolling tools in copper rolling
In: Wear, Vol.271 (2011), No.9-10, pp.2531-2541
urn:nbn:de:0011-n-1895995
Memhard, D.; Andrieux, F.; Sun, D.-Z.; Häcker, R.:
Development and verification of a material model for prediction of containment safety of exhaust turbochargers
(European LS-DYNA Users Conference <8, 2011, Strasbourg>)
In: 8th European Users Conference 2011: May 23rd - 24th, 2011, Strasbourg, France. Solihull, UK: Arup, 2011, 11 pp.
Moras, G.; Pastewka, L.; Gumbsch, P.; Moseler, M.:
Formation and oxidation of linear carbon chains and their role in the wear of carbon materials
In: Tribology letters, Vol.44 (2011), No.3, pp.355-365
urn:nbn:de:0011-n-1892221
Moras, G.; Pastewka, L.; Walter, M.; Schnagl, J.; Gumbsch, P.; Moseler, M.:
Progressive shortening of sp-hybridized carbon chains through oxygen-induced cleavage
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.115 (2011), No.50, pp.24653-24661
urn:nbn:de:0011-n-1984495
Müller, A.; Lorenz, M.; Brachwitz, K.; Lenzner, J.; Mittwoch, K.; Skorupa, W.; Grundmann, M.; Höche, T.:
Fresnoite thin films grown by pulsed laser deposition: Photoluminescence and laser crystallization
In: CrystEngComm, Vol.13 (2011), No.21, pp.6377-6385
urn:nbn:de:0011-n-1888955
Pastewka, L.; Moser, S.; Gumbsch, P.; Moseler, M.:
Anisotropic mechanical amorphization drives wear in diamond
In: Nature Materials, Vol.10 (2011), No.1, pp.34-38
urn:nbn:de:0011-n-1725609
Pergande, D.; Geppert, T.; Rhein, A. von; Schweizer, S.; Wehrspohn, R.; Moretton, S.; Lambrecht, A.:
Miniature infrared gas sensors using photonic crystals
In: Journal of applied physics, Vol.109 (2011), No.8, Art. 083117, 7 pp.
urn:nbn:de:0011-n-1610454
Pfeiffer, W.; Koplin, C.; Reisacher, E.; Wenzel, J.:
Residual stresses and strength of hard chromium coatings
(European Conference on Residual Stresses (ECRS) <8, 2010, Riva del Garda>)
In: Scardi, P.: Residual Stresses VIII. Selected, peer reviewed papers from the 8th European Conference on Residual Stresses, ECRS 2010: June 26-28, 2010, Riva del Garda, Italy. Stafa-Zurich: Trans Tech Publications, 2011. (Materials Science Forum 681), pp. 133-138
urn:nbn:de:0011-n-1725359
Schulze, V.; Michna, J.; Schneider, J.; Gumbsch, P.:
Modelling of cutting induced surface phase transformations considering friction effects
(Conference on Surface Integrity (CSI) <1, 2012, Bremen>)
In: Procedia Engineering, Vol.19 (2011), pp.331–336
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.:
Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens
In: Acta Materialia, Vol.59 (2011), No.8, pp.2937-2947
urn:nbn:de:0011-n-1725391
Siegele, D.:
Welding mechanics for advanced component safety assessment
In: Frontiers of materials science, Vol.5 (2011), No.2, pp.224-235
urn:nbn:de:0011-n-1725346
Sommer, S.; Maier, J.:
Failure modeling of a self piercing riveted joint using LS-DYNA
(European LS-DYNA Users Conference <8, 2011, Strasbourg>)
In: 8th European Users Conference 2011: May 23rd - 24th, 2011, Strasbourg, France. Solihull, UK: Arup, 2011, 11 pp.
Steier, V.; Koplin, C.; Kailer, A.; Reinecke, H.:
Investigation of the adhesion promoter distribution in porous ceramic precursors
In: ISRN mechanical engineering. Online journal, (2011), Artikel ID 304129; 9 pp.
urn:nbn:de:0011-n-2125982
Uhrig, D.; Schlegel, R.; Weidisch, R.; Mays, J.:
Multigraft copolymer superelastomers: Synthesis morphology, and properties
In: European polymer journal : EPJ, Vol.47 (2011), No.4, pp.560-568
urn:nbn:de:0011-n-1632516
Ulrich, C.M.; Hashibon, A.; Svoboda, J.; Elsässer, C.; Helm, D.; Riedel, H.:
Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations
In: Acta Materialia, Vol.59 (2011), No.20, pp.7634-7644
urn:nbn:de:0011-n-1888249
Upping, J.; Salzer, R.; Otto, M.; Beckers, T.; Steidl, L.; Zentel, R.; Carius, R.; Wehrspohn, R.B.:
Transparent conductive oxide photonic crystals on textured substrates
In: Photonics and nanostructures, Vol.9 (2011), No.1, pp.31-34
urn:nbn:de:0011-n-1633663
Amann, T.; Kailer, A.:
Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems
In: Tribology letters, Vol.37 (2010), No.2, pp.343-352
urn:nbn:de:0011-n-1187488
Antusch, S.; Dienwiebel, M.; Nold, E.; Albers, P.; Spicher, U.; Scherge, M.:
On the tribochemical action of engine soot
In: Wear, Vol.269 (2010), No.1-2, pp.1-12
urn:nbn:de:0011-n-1367235
Bachurin, D.V.; Gumbsch, P.:
Accommodation processes during deformation of nanocrystalline palladium
In: Acta Materialia, Vol.58 (2010), No.16, pp.5491-5501
urn:nbn:de:0011-n-1438250
Bachurin, D.V.; Weygand, D.; Gumbsch, P.:
Dislocation-grain boundary interaction in <1 1 1> textured thin metal films
In: Acta Materialia, Vol.58 (2010), No.16, pp.5232-5241
urn:nbn:de:0011-n-1438246
Bachurin, DV.; Gumbsch, P.:
Molecular dynamics study of plastic deformation of nanocrystalline palladium
In: Nagel, W.E. et al.: High performance computing in science and engineering ' 09: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2009. Berlin: Springer, 2010, pp. 111-122
urn:nbn:de:0011-n-1332375
Berlet, P.; Dienwiebel, M.; Scherge, M.:
The effect of sample finishing on the tribology of metal/metal lubricated contacts
In: Wear, Vol.268 (2010), No.11-12, pp.1518-1523
urn:nbn:de:0011-n-1367224
Boettcher, T.; Rother, M.; Liedtke, S.; Ullrich, M.; Bollmann, M.; Pinkernelle, A.; Gruber, D.; Funke, H.-J.; Kaiser, M.; Lee, K.; Li, M.; Leung, K.; Li, T.; Farrugia, M.L.; O'Halloran, O.; Petzold, M.; März, B.; Klengel, R.:
On the intermetallic corrosion of Cu-Al wire bonds
(Electronics Packaging Technology Conference (EPTC) <12, 2010, Singapore>)
In: Institute of Electrical and Electronics Engineers -IEEE-, Singapore Section, Reliability CPMT EDS Chapter: 12th Electronics Packaging Technology Conference, EPTC 2010: Singapore, 8 - 10 December 2010. New York, NY: IEEE, 2010, pp. 585-590
urn:nbn:de:0011-n-1725864
Butz, A.; Lossau, S.; Springub, B.; Roters, F.:
On the modeling of dual phase steels: Microstructure-based simulation from the hot rolled sheet to the deep drawn component
(International Conference on Material Forming <13, 2010, Brescia>)
In: Ceretti, E.: 13th ESAFORM Conference on Material Forming 2010. Proceedings: Brescia (Italy), 7-9 April 2010. Berlin: Springer, 2010. (International Journal of Material Forming 3.2010, Supplement 1), pp. 73-76
urn:nbn:de:0011-n-1726153
Dresbach, C.; Mittag, M.; Petzold, M.:
Elastic properties of bonding wires
(Electronics System Integration Technology Conference (ESTC) <3, 2010, Berlin>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 3rd Electronics System Integration Technology Conference, ESTC 2010. Proceedings. Vol.1: Berlin, Germany, 13 - 16 September 2010. New York, NY: IEEE, 2010, pp. 479-482
urn:nbn:de:0011-n-1725732
Frensemeier, M.; Koplin, C.; Jaeger, R.; Kramer, F.; Klemm, D.:
Mechanical properties of bacterially synthesized nanocellulose hydrogels
(Cellulose Symposium <51, 2009, Wiesbaden>)
In: Heinze, T.: Utilization of lignocellulosic materials: Selected contributions from the conference: 51st Cellulose Symposium in: Wiesbaden (Germany), June 23 to 24, 2009. Weinheim: Wiley-VCH, 2010. (Macromolecular symposia 294.2010, Nr.2), pp. 38-44
urn:nbn:de:0011-n-1725994
Hashibon, A.; Elsässer, C.:
Approaches to atomistic triple-line properties from first-principles
In: Scripta materialia, Vol.62 (2010), No.12, pp.939-944
urn:nbn:de:0011-n-1337642
Heierli, J.; Birkeland, K.W.; Simenhois, R.; Gumbsch, P.:
New insights into skier-triggering of slab avalanches
(International Snow Science Workshop (ISSW) <2010, Squaw Valley/Calif.>)
In: Johnson, R.: International Snow Science Workshop 2010. Proceedings: October 17th - October 22nd at the 'Resort at Squaw Creek', Squaw Valley, CA. Squaw Valley, Calif., 2010, pp. 207-2013
Henke, B.; Pientka, F.; Johnson, J.A.; Ahrens, B.; Miclea, P.T.; Schweizer, S.:
Saturation effects in the upconversion efficiency of Er-doped fluorozirconate glasses
In: Journal of Physics. Condensed Matter, Vol.22 (2010), No.15, Art.155107, 6 pp.
urn:nbn:de:0011-n-1314997
Hohe, J.; Brand, M.; Siegele, D.:
Behaviour of sub-clad and through-clad cracks under consideration of the residual stress field
In: Engineering fracture mechanics, Vol.77 (2010), No.2, pp.217-228
urn:nbn:de:0011-n-1250813
Hohe, J.; Hardenacke, V.; Luckow, S.; Siegele, D.:
An enhanced probabilistic model for cleavage fracture assessment accounting for local constraint effects: Dedicated to Prof. Dr.-Ing. Dietmar Gross on occasion of his 65th birthday
(International Conference on Fracture (ICF) <12, 2009, Ottawa>)
In: Zhang, C.: Computational mechanics in fracture and damage. A special issue in honor of Prof. Gross: A special session "Computational Dynamic Fracture Mechanics & Meso- and Micromechanical Aspects of Fracture" was held at the 12th International Conference on Fracture (ICF 12), July 12 - 17, 2009, Ottawa, Ontario, Canada. Amsterdam: Elsevier, 2010. (Engineering fracture mechanics 77.2010, Nr.18), pp. 3573-3591
urn:nbn:de:0011-n-1725850
Hohe, J.; Gumbsch, P.:
On the potential of tungsten-vanadium composites for high temperature application with wide-range thermal operation window
In: Journal of nuclear materials, Vol.400 (2010), No.3, pp.218-231
urn:nbn:de:0011-n-1367063
Kleine, A.; Koch, H.; Böhme, W.:
Untersuchungen zur Charakterisierung von crashrelevantem Bauteilverhalten
In: Gießerei, Vol.97 (2010), 5, pp.34-42
Koller, S.; Mayrhofer, L.; Grifoni, M.:
Spin-dependent transport through interacting graphene armchair nanoribbons
In: New journal of physics. Online journal, Vol.12 (2010), No.3, Art.033038, 36 pp.
Korbel, S.; Marton, P.; Elsasser, C.:
Formation of vacancies and copper substitutionals in potassium sodium niobate under various processing conditions
In: Physical Review. B, Vol.81 (2010), No.17, Art. 174115
urn:nbn:de:0011-n-1367569
Körner, W.; Elsässer, C.:
First-principles density functional study of dopant elements at grain boundaries in ZnO
In: Physical Review. B, Vol.81 (2010), No.8, Art.085324, 12 pp.
urn:nbn:de:0011-n-1250590
Kumar-Krishnasamy, R.; Siegele, D.:
3D modelling of a multi pass dissimilar tube welding and post weld heat treatment of nickel based alloy and chromium steel
In: International journal of pressure vessels and piping, Vol.87 (2010), No.11, pp.643-649
urn:nbn:de:0011-n-1725925
Markmann, J.; Bachurin, D.; Shao, L.; Gumbsch, P.; Weissmüller, J.:
Microstrain in nanocrystalline solids under load by virtual diffraction
In: epl. A letters journal exploring the frontiers of physics, Vol.89 (2010), No.6, Art. 66002, 6 pp.
urn:nbn:de:0011-n-1726128
Mrovec, M.; Elsässer, C.; Gumbsch, P.:
Atomistic simulations of lattice defects in tungsten
(International Plansee Seminar <17, 2010, Reutte>)
In: Schade, P.: 17th International Plansee Seminar 2009. Selected papers: Was held May 25 - 29, 2009, Reutte, Austria. Amsterdam: Elsevier, 2010. (International journal of refractory metals & hard materials 28.2010, Nr.6), pp. 698-702
urn:nbn:de:0011-n-1567344
Petzold, M.; Altmann, F.; Krause, M.; Salzer, R.; Schmidt, C.; Martens, S.; Mack, W.; Dömer, H.; Nowodzinski, A.:
Micro structure analysis for system in package components - novel tools for fault isolation, target preparation, and high-resolution material diagnostics
(Electronic Components and Technology Conference (ECTC) <60, 2010, Las Vegas/Nev.>)
In: IEEE Components, Packaging, and Manufacturing Technology Society: 60th Electronic Components and Technology Conference, ECTC 2010. Proceedings. Part 2: 1-4 June 2010, Las Vegas, NV, USA. New York, NY: IEEE, 2010, pp. 1296-1302
urn:nbn:de:0011-n-1725964
Pfau, C.; Miclea, P.-T.; Bohley, C.; Schweizer, S.:
Phonon spectra of barium halide nanocrystals in fluorozirconate glasses
(Europhysical Conference on Defects in Insulating Materials (EURODIM) <11, 2010, Pécs>)
In: IOP conference series. Materials science and engineering, Vol.15 (2010), No.1, Art. 012021
Pfeiffer, W.; Wenzel, J.:
Shot peening of brittle materials - status and outlook
(International Conference on Processing & Manufacturing of Advanced Materials (THERMEC) <6, 2009, Berlin>)
In: Chandra, T. et al.: THERMEC 2009, 6th International Conference on Processing & Manufacturing of Advanced Materials. Pt.1: Berlin, Germany, August 25 - 29, 2009. Stafa-Zürich: Trans Tech Publications, 2010. (Materials Science Forum 638-642), pp. 799-804
urn:nbn:de:0011-n-1322591
Sandfeld, S.; Hochrainer, T.; Gumbsch, P.; Zaiser, M.:
Numerical implementation of a 3D continuum theory of dislocation dynamics and application to micro-bending
In: The philosophical magazine, Vol.90 (2010), No.27-28, pp.3697-3728
urn:nbn:de:0011-n-1427834
Scherm, F.; Völkl, R.; Neubrand, A.; Bosbach, F.; Glatzel, U.:
Mechanical characterisation of interpenetrating network metal-ceramic composites
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.527 (2010), No.4-5, pp.1260-1265
urn:nbn:de:0011-n-1187801
Schweizer, C.; Seifert, T.; Riedel, H.:
Simulation of fatigue crack growth under large scale yielding conditions
(International Conference on the Strength of Materials (ICSMA) <15, 2009, Dresden>)
In: Skrotzki, W.: 15th International Conference on the Strength of Materials, ICSMA 2009: Dresden, Germany, 16 - 21 August 2009. Red Hook, NY: Curran, 2010. (Journal of physics. Conference series 240), pp. 198-201 (Art. 012043)
Schweizer, S.; Henke, B.; Ahrens, B.; Paßlick, C.; Miclea, P.T.; Wenzel, J.; Reisacher, E.; Pfeiffer, W.; Johnson, J.A.:
Progress on up- and down-converted fluorescence in rare-doped fluorozirconate-based glass ceramics for high efficiency solar cells
(Conference "Photonics for Solar Energy Systems" <3, 2010, Brussels>)
In: Wehrspohn, R.B.: Photonics for Solar Energy Systems III: 13.-15.4.2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7725), Paper 77250X
urn:nbn:de:0011-n-1726057
Seifert, T.; Maier, G.; Uihlein, A.; Lang, K.H.; Riedel, H.:
Mechanism-based thermomechanical fatigue life prediction of cast iron. Part II: Comparison of model predictions with experiments
In: International journal of fatigue, Vol.32 (2010), No.8, pp.1368-1377
urn:nbn:de:0011-n-1367368
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.:
Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions
In: The philosophical magazine, Vol.90 (2010), No.5, pp.617-628
urn:nbn:de:0011-n-1251271
Sommer, S.:
Modeling of the fracture behavior of spot welds using advanced micro-mechanical damage models
(World Congress on Computational Mechanics (WCCM) <9, 2010, Sydney>)
In: IOP conference series. Materials science and engineering, Vol.10 (2010), No.1, Art.012057
Springub, B.; Masimov, M.; Butz, A.; Feucht, M.; Lossau, S.; Neukamm, F.; Roll, K.; Haufe, A.; Roters, F.; Schwarzer, R.; Wagener, C.:
Zum Stand der virtuellen Werkstoffentwicklung: Vom Halbzeug zum Crash
(LS-DYNA Forum <9, 2010, Bamberg>)
In: DYNAmore GmbH, Stuttgart: 9th LS-DYNA FORUM 2010. Proceedings: 12. - 13. Oktober 2010 in Bamberg. Stuttgart, 2010, pp. C-II-05
Standke, G.; Müller, T.; Neubrand, A.; Weise, J.; Göpfert, M.:
Cost-efficient metal-ceramic composites - novel foam-preforms, casting processes and characterisation
In: Advanced engineering materials, Vol.12 (2010), No.3, pp.189-196
urn:nbn:de:0011-n-1323080
Ziegler, T.; Neubrand, A.; Piat, R.:
Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains
In: Composites science and technology, Vol.70 (2010), No.4, pp.664-670
urn:nbn:de:0011-n-1332111
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.:
Die filling optimization using three-dimensional discrete element modeling
In: Powder Technology, Vol.196 (2009), No.2, pp.169-179
urn:nbn:de:0011-n-1113691
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.:
Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling
In: Journal of the Mechanics and Physics of Solids, Vol.57 (2009), No.1, pp.10-31
urn:nbn:de:0011-n-892953
Bierwisch, C.; Moseler, M. :
Numerical simulations of granular flow and filling
Freiburg/Brsg., Univ., Diss., 2009
Dudarev, S.L.; Boutard, J.-L.; Lässer, R.; Caturla, M.J.; Derlet, P.M.; Fivel, M.; Fu, C.-C.; Lavrentiev, M.Y.; Malerba, L.; Mrovec, M.; Nguyen-Manh, D.; Nordlund, K.; Perlado, M.; Schäublin, R.; Swygenhoven, H. van; Terentyev, D.; Wallenius, J.; Weygand, D.; Willaime, F.:
The EU programme for modelling radiation effects in fusion reactor materials: An overview of recent advances and future goals
(International Conference on Fusion Reactor Materials <13, 2007, Nice>)
In: Journal of nuclear materials, Vol.386-388 (2009), pp.1-7
urn:nbn:de:0011-n-960306
Gall, M.; Thielicke, B.; Schmidt, I.:
Integrity of piezoceramic patch transducers under cyclic loading at different temperatures
(Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) <1, 2008, Ellicott City/Md.>)
In: Lynch, C.: Adaptive and active materials. Selected papers from the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2008: Maryland, USA, 28 - 30 October 2008. Bristol: IOP Publishing, 2009. (Smart materials and structures 18.2009, Nr.10), Art. 104009, 10 pp.
urn:nbn:de:0011-n-1076900
Hartrott, P. von; Holmström, S.; Caminada, S.; Pillot, S.:
Life-time prediction for advanced low alloy steel P23
(International Conference of Creep and Fracture of Engineering Materials and Structures (CREEP) <11, 2008, Bad Berneck>)
In: Glatzel, U.: 11th International Conference of Creep and Fracture of Engineering Materials and Structures, CREEP 2008: Held at Bad Berneck, Germany, 4 - 9 May 2008. Amsterdam: Elsevier, 2009. (Materials science & engineering. A, Structural materials: properties, microstructure and processing 510/511.2009), pp. 175-179
urn:nbn:de:0011-n-961315
Hildenbrand, J.; Peter, C.; Lamprecht, F.; Kürzinger, A.; Naumann, F.; Ebert, M.; Wehrspohn, R.; Wöllenstein, J.:
Fast transient temperature operating micromachined emitter for mid-infrared for optical gas sensing systems
(Conference "Smart Sensors, Actuators, and MEMS" <4, 2009, Dresden>)
In: Schmid, U.: Smart Sensors, Actuators, and MEMS IV: 4 May 2009, Dresden, Germany. Bellingham, WA: SPIE, 2009. (SPIE Proceedings Series 7362), Art. 73620S
urn:nbn:de:0011-n-955245
Hormann, C.; Meier, S.; Moseler, M.:
The importance of non-local shadowing for the topography evolution of a-C:H films grown by toluene based plasma enhanced chemical vapor deposition
In: The European physical journal. B, Condensed matter physics, Vol.69 (2009), No.2, pp.187-194
urn:nbn:de:0011-n-961545
Hummert, K.; Schattevoy, R.; Broda, M.; Knappe, M.; Beiss, P.; Klubberg, F.; Schubert, Th.; Leuschner, R.:
Nano-crystalline P/M aluminium for automotive applications
In: Journal of physics. Conference series, Vol.144 (2009), Art. 012006
Jaeger, C.R.; Koplin, C.; Gurr, M.; Meiners, W.:
Internal stresses and shape distortions in generatively manufactured implants
(World Conference on Regenerative Medicine (WRM) <2009, Leipzig>)
In: Regenerative medicine, Vol.4 (2009), No.6, Supplement2, pp.103-104
Mrovec, M.; Albina, J.-M.; Meyer, B.; Elsässer, C.:
Schottky barriers at transition-metal/SrTiO3(001) interfaces
In: Physical Review. B, Vol.78 (2009), No.24, Art. 245121, 18 pp.
urn:nbn:de:0011-n-969880
Pastewka, L.; Salzer, R.; Graff, A.; Altmann, F.; Moseler, M.:
Surface amorphization, sputter rate, and intrinsic stresses of silicon during low energy Ga+ focused-ion beam milling
(International Conference on Computer Simulation of Radiation Effects in Solids (COSIRES) <9, 2008, Beijing>)
In: Wang, T.: Computer simulation of radiation effects in solids. Ninth International Conference on Computer Simulation of Radiation Effects in Solids, COSIRES 2008. Proceedings: Beijing, China, 12 - 17 October 2008. Amsterdam: Elsevier, 2009. (Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms 267.2009, Nr.18), pp. 3072-3075
urn:nbn:de:0011-n-1113727
Pastewka, L.; Koskinen, P.; Elsässer, C.; Moseler, M.:
Understanding the microscopic processes that govern the charge-induced deformation of carbon nanotubes
In: Physical Review. B, Vol.80 (2009), No.15, Art. 155428, 16 pp.
urn:nbn:de:0011-n-1104104
Prakash, A.; Weygand, S.M.; Riedel, H.:
Modeling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 744-750
urn:nbn:de:0011-n-961981
Prakash, A.; Lebensohn, R.A.:
Simulation of micromechanical behavior of polycrystals: Finite elements versus fast Fourier transforms
(Symposium on Multiscale Modeling of Microstructure Evolution in Materials <2008, Tallahassee/Fla.>)
In: Modelling and simulation in materials science and engineering, Vol.17 (2009), No.6, Art. 064010, 16 pp.
urn:nbn:de:0011-n-1063076
Schwanke, D.; Pohlner, J.; Wonisch, A.; Kraft, T.; Geng, J.:
Enhancement of fine line print resolution due to coating of screen fabrics
In: Journal of microelectronics and electronic packaging, Vol.6 (2009), No.1, pp.13-19
urn:nbn:de:0011-n-1130614
Seifert, T.; Schmidt, I.:
Plastic yielding in cyclically loaded porous materials
In: International Journal of Plasticity, Vol.25 (2009), No.12, pp.2435-2453
urn:nbn:de:0011-n-1133798
Sun, D.-Z.; Andrieux, F.; Feucht, M.:
Damage modelling of a TRIP steel for integrated simulation from deep drawing to crash
(European LS-DYNA Conference <7, 2009, Salzburg>)
In: DYNAmore GmbH, Stuttgart: 7th European LS-DYNA Conference 2009. Proceedings. Salzburg, 2009, pp. B-III-04
Umeno, Y.; Albina, J.M.; Meyer, B.; Elsässer, C.:
Ab initio calculations of ferroelectric instability in PbTiO3 capacitors with symmetric and asymmetric electrode layers
In: Physical Review. B, Vol.80 (2009), No.20, Art.205122, 8 pp.
urn:nbn:de:0011-n-1332080
Wonisch, A.; Moseler, Michael :
Entwicklung und Anwendung partikelbasierter Simulationstechniken für die Modellierung von Umordnungseffekten und Anisotropieentwicklung in pulvertechnologischen Prozessen
Freiburg/Brsg., Univ., Diss., 2008
Ziegler, T.; Neubrand, A.; Roy, S.; Wanner, A.; Piat, R.:
Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments
In: Composites science and technology, Vol.69 (2009), No.5, pp.620-626
urn:nbn:de:0011-n-922879
Zimmermann, J.; Finnis, M.W.; Ciacchi, L.C.:
Vacancy segregation in the initial oxidation stages of the TiN(100) surface
In: The Journal of chemical physics, Vol.130 (2009), No.13, Art. 134714, 11 pp.
urn:nbn:de:0011-n-947321
Böhme, W.:
FAT-Richtlinie: Dynamische Werkstoffkennwerte für die Crashsimulation
In: MP materials testing, Vol.50 (2008), No.4, pp.199-205
urn:nbn:de:0011-n-858379
Butz, A.; Klinkel, S.; Wagner, W.:
A geometrically and materially non-linear piezoelectric three-dimensional-beam finite element formulation including warping effects
In: International journal for numerical methods in engineering, Vol.76 (2008), No.5, pp.601-635
urn:nbn:de:0011-n-872063
Cheng, Y.; Mrovec, M.; Gumbsch, P.:
Atomistic simulations of interactions between the 1/2(111) edge dislocation and symmetric tilt grain boundaries in tungsten
In: The philosophical magazine, Vol.88 (2008), No.4, pp.547-560
urn:nbn:de:0011-n-753284
Cheng, Y.; Mrovec, M.; Gumbsch, P.:
Crack nucleation at the Sigma 9(2(2)over-bar1) symmetrical tilt grain boundary in tungsten
(International Conference on the Strength of Materials (ICSMA) <14, 2006, Xian>)
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.483-484 (2008), pp.329-332
urn:nbn:de:0011-n-753026
Cupelli, C.; Henrich, B.; Glatzel, T.; Zengerle, R.; Moseler, M.; Santer, M.:
Dynamic capillary wetting studied with dissipative particle dynamics
In: New journal of physics. Online journal, (2008), No.10, Paper 043009, 16 pp.
Dianat, A.; Zimmermann, J.; Seriani, N.; Bobeth, M.; Pompe, W.; Colombi Ciacchi, L.:
Ab initio study of element segregation and oxygen adsorption on PtPd and CoCr binary alloy surfaces
In: Surface Science, Vol.602 (2008), No.4, pp.876-884
urn:nbn:de:0011-n-722581
Droß, G.; Blöcher, U.; Manns, P.; Kleer, G.; Hug, M.; Gremmelspacher, M.:
Schnelles Heißprägeverfahren für mikrooptische Komponenten: Vortrag gehalten auf dem Symposium Moderne Optikfertigung, 08.02.2008 in Wetzlar
(Symposium Moderne Optikfertigung <2008, Wetzlar>)
2008
urn:nbn:de:0011-n-969878
Gemetz, F.; Meier, S.:
Kunststoffbeschichtung mit DLC
In: Konstruktion, (2008), No.6, pp.IW9-IW10
urn:nbn:de:0011-n-970386
Hashibon, A.; Lozovoi, A.Y.; Mishin, Y.; Elsässer, C.; Gumbsch, P.:
Interatomic potential for the Cu-Ta system and its application to surface wetting and dewetting
In: Physical Review. B, Vol.77 (2008), No.9, Art. 094131, 9 pp.
urn:nbn:de:0011-n-722039
Helm, D.; Hochrainer, T.; Prakash, A.:
Modellierung und Simulation höher- und höchstfester Stähle
In: Konstruktion, (2008), No.6, pp.IW9-IW10
urn:nbn:de:0011-n-922864
Henrich, B.; Cupelli, C.; Santer, M.; Moseler, M.:
Continuum concepts in nanoscale capillary impregnation
In: New journal of physics. Online journal, Vol.10 (2008), No.11, Art. 113022, 14 pp.
Hohe, J.; Brand, M.; Siegele, D.:
Fracture analysis of cladded components considering residual stresses
(Gesellschaft für Angewandte Mathematik und Mechanik (GAMM Annual Meeting) <79, 2008, Bremen>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.8 (2008), No.1, pp.10209-10210
urn:nbn:de:0011-n-1782070
Koplin, C.; Jaeger, R.; Hahn, P.:
Kinetic model for the coupled volumetric and thermal behavior of dental composites
In: Dental materials, Vol.24 (2008), No.8, pp.1017-1024
urn:nbn:de:0011-n-776433
Pastewka, L.; Pou, P.; Perez, R.; Gumbsch, P.; Moseler, M.:
Describing bond-breaking processes by reactive potentials: Importance of an environment-dependent interaction range
In: Physical Review. B, Vol.78 (2008), No.16, Art. 161402, 4 pp.
urn:nbn:de:0011-n-871994
Pfeiffer, W.; Wenzel, J.:
The multiple-incremental hole drilling method
In: MP materials testing, Vol.50 (2008), No.9, pp.495-499
urn:nbn:de:0011-n-861586
Umeno, Y.; Elsässer, C.; Meyer, B.; Gumbsch, P.; Weissmüller, J.:
Reversible relaxation at charged metal surfaces: An ab initio study
In: epl. A letters journal exploring the frontiers of physics, Vol.84 (2008), No.1, Art. 13002, 6 pp.
urn:nbn:de:0011-n-922815
Vedmedenko, O.; Rösch, F.; Elsässer, C.:
First-principles density functional theory study of phase transformation in NbCr2 and TaCr2
In: Acta Materialia, Vol.56 (2008), No.18, pp.4984-4992
urn:nbn:de:0011-n-922847
Zimmermann, J.; Pavone, P.; Cuniberti, G.:
Vibrational modes and low-temperature thermal properties of graphene and carbon nanotubes: Minimal force-constant model
In: Physical Review. B, Vol.78 (2008), No.4, Art. 045410, 13 pp.
urn:nbn:de:0011-n-820513
Albina, J.-M.; Mrovec, M.; Meyer, B.; Elsässer, C.:
Structure, stability, and electronic properties of SrTiO3/LaAlO3 and SrTiO3/SrRuO3 interfaces
In: Physical Review. B, Vol.76 (2007), No.16, Art. 165103, 12 pp.
urn:nbn:de:0011-n-690099
Cole, D.J.; Payne, M.C.; Csanyi, G.; Spearing, S.M.; Ciacchi, L.C.:
Development of a classical force field for the oxidized Si surface: Application to hydrophilic wafer bonding
In: The Journal of chemical physics, Vol.127 (2007), No.20, Art. 204704, 12 pp.
urn:nbn:de:0011-n-678628
Cole, D.J.; Payne, M.C.; Colombi Ciacchi, L.:
Stress development and impurity segregation during oxidation of the Si(100) surface
In: Surface Science, Vol.601 (2007), No.21, pp.4888-4898
urn:nbn:de:0011-n-678699
Greve, L.; Andrieux, F.:
Deformation and failure modelling of high strength adhesives for crash simulation
In: International Journal of Fracture, Vol.143 (2007), No.2, pp.143-160
urn:nbn:de:0011-n-615645
Hashibon, A.; Elsässer, C.; Mishin, Y.; Gumbsch, P.:
First-principles study of thermodynamical and mechanical stabilities of thin copper film on tantalum
In: Physical Review. B, Vol.76 (2007), No.24, Art. 245434, 9 pp.
urn:nbn:de:0011-n-702701
Hoess, A.; Teuscher, N.; Thormann, A.; Aurich, H.; Heilmann, A.:
Cultivation of hepatoma cell line HepG2 on nanoporous aluminum oxide membranes
In: Acta biomaterialia, Vol.3 (2007), No.1, pp.43-50
urn:nbn:de:0011-n-509266
Koskinen, P.; Häkkinen, H.; Huber, B.; Issendorff, B. von; Moseler, M.:
Liquid-liquid phase coexistence in gold clusters. 2D or not 2D?
In: Physical review letters, Vol.98 (2007), No.1, Art. 015701
urn:nbn:de:0011-n-545980
Kostko, O.; Huber, B.; Moseler, M.; Issendorff, B. von:
Structure determination of medium-sized sodium clusters
In: Physical review letters, Vol.98 (2007), Art. 043401
urn:nbn:de:0011-n-545975
Moras, G.; Ciacchi, L.C.; Csanyi, G.; Vita, A. de:
Modelling (100) hydrogen-induced platelets in silicon with a multi-scale molecular dynamics approach
(International Conference on Defects in Semiconductors (ICDS) <24, 2007, Albuquerque/NM>)
In: Estreicher, S.K.: 24th International Conference on Defects in Semiconductors 2007. Proceedings: Held in Albuquerque, NM, USA, 22 - 27 July 2007. Amsterdam: Elsevier, 2007. (Physica: B, Condensed matter 401/402.2007), pp. 16-20
urn:nbn:de:0011-n-702560
Mrovec, M.; Moseler, M.; Elsässer, C.; Gumbsch, P.:
Atomistic modeling of hydrocarbon systems using analytic bond-order potentials
In: Finnis, M.W.: Modelling electrons and atoms for materials science. Oxford: Elsevier, 2007. (Progress in materials science 52.2007,Nr.2/3), pp. 230-254
urn:nbn:de:0011-n-545993
Mrovec, M.; Gröger, R.; Bailey, A.G.; Nguyen-Manh, D.; Elsässer, C.; Vitek, V.:
Bond-order potential for simulations of extended defects in tungsten
In: Physical Review. B, Vol.75 (2007), No.10, Art. 104119, 16 pp.
urn:nbn:de:0011-n-593322
Ocenasek, J.; Rodriguez Ripoll, M.; Weygand, S.M.; Riedel, H.:
Multi-grain finite element model for studying the wire drawing process
(International Workshop on Computational Mechanics of Materials (IWCMM) <15, 2005, Düsseldorf>)
In: Roters, F.: Computational mechanics of materials. Proceedings of the 15th international workshop 2005: Düsseldorf, Germany, 19 - 20 September, 2005. Amsterdam: Elsevier, 2007. (Computational materials science 39.2007, Nr.1), pp. 23-28
urn:nbn:de:0011-n-594074
Riedel, H.; Andrieux, F.; Walde, T.; Karhausen, K.-F.:
The formation of edge cracks during rolling of metal sheet
In: Steel research international, Vol.78 (2007), No.10-11, pp.818-824
urn:nbn:de:0011-n-677410
Schönfelder, S.; Ebert, M.; Landesberger, C.; Bock, K.; Bagdahn, J.:
Investigations of the influence of dicing techniques on the strength properties of thin silicon
In: Microelectronics reliability, Vol.47 (2007), No.2-3, pp.168-178
urn:nbn:de:0011-n-528665
Seriani, N.; Jin, Z.; Pompe, W.; Colombi Ciacchi, L.:
Density functional theory study of platinum oxides: From infinite crystals to nanoscopic particles
In: Physical Review. B, Vol.76 (2007), No.15, Art. 155421, 10 pp.
urn:nbn:de:0011-n-678474
Umeno, Y.; Elsasser, C.; Meyer, B.; Gumbsch, P.; Nothacker, M.; Weissmüller, J.; Evers, F.:
Ab initio study of surface stress response to charging
In: epl. A letters journal exploring the frontiers of physics, Vol.78 (2007), No.1, Art. 13001, 5 pp.
urn:nbn:de:0011-n-615874
Wemhöner, J.; Bergrath, B.; Kreuser, J.; CEROBEAR GmbH, Herzogenrath; Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.; FEV-Motorentechnik, Aachen; Fraunhofer-Institut für Keramische Technologien und Systeme -IKTS-, Dresden:
RolaMot - Erforschung des Einsatzes von Siliciumnitrid-Wälzlagern in einem Ottomotor zur Herabsetzung der inneren Motorreibung mit dem Ziel der Reduzierung des Kraftstoffverbrauchs und der CO2-Emissionen: BMBF-Rahmenkonzept "MaTech - neue Materialien für Schlüsseltechnologien des 21. Jahrhunderts". Ergebnisse aus dem Verbundprojekt, BMBF-Verbundprojekt 03N3115, F&E Abschlussbericht, Berichtszeitraum: 01.07.2003 - 31.03.2007
Herzogenrath, 2007
Dresbach, C.; Krombholz, A.; Ebert, M.; Bagdahn, J.:
Mechanical properties of glass frit bonded micro packages
(Wafer-Bonding Workshop for MEMS Technologies (WBW-MEMS) <2004, Halle/Saale>)
In: Bagdahn, J.: Wafer-Bonding Workshop for MEMS Technologies, WBW-MEMS 2004. Special Issue: 11 - 12 October 2004, Halle: Two-day Workshop on "Wafer Bonding for MEMS Technologies". Berlin: Springer, 2006. (Microsystem technologies 12.2006,Nr.5), pp. 473-480
urn:nbn:de:0011-n-509189
Häkkinen, H.; Moseler, M.:
55-Atom clusters of silver and gold: Symmetry breaking by relativistic effects
(International Conference on the Theory of Atomic and Molecular Clusters (TAMC) <4, 2004, Toulouse >)
In: Pastor, G.M.: Theory of atomic and molecular clusters: Proceedings of the 4th International Conference TAMC-IV; Toulouse, France, 24 - 28 April, 2004. Amsterdam: Elsevier, 2006. (Computational materials science 35.2006,Nr.3), pp. 332-336
urn:nbn:de:0011-n-366345
Koskinen, P.; Häkkinen, H.; Seifert, G.; Sanna, S.; Frauenheim, T.; Moseler, M.:
Density-functional based tight-binding study of small gold clusters
In: New journal of physics. Online journal, Vol.8 (2006), January 2006, Art. 9, 11 pp.
urn:nbn:de:0011-n-932668
Krasowsky, A.; Schmitt, W.; Riedel, H.:
Material characterisation for reliable and efficient springback prediction in sheet metal forming
In: Steel research international, Vol.77 (2006), No.9-10, pp.747-759
urn:nbn:de:0011-n-491189
Umeno, Y.; Shimada, T.; Kitamura, T.; Elsässer, C.:
Ab initio density functional theory study of strain effects on ferroelectricity at PbTiO3 surfaces
In: Physical Review. B, Vol.74 (2006), No.17, Art. 174111, 9 pp.
urn:nbn:de:0011-n-545961
Umeno, Y.; Meyer, B.; Elsässer, C.; Gumbsch, P.:
Ab initio study of the critical thickness for ferroelectricity in ultrathin Pt/PbTiO3/Pt films
In: Physical Review. B, Vol.74 (2006), No.6, Art. 060101, 4 pp.
urn:nbn:de:0011-n-597312
Weygand, S.M.; Riedel, H.; Eberhard, B.; Wouters, G.:
Numerical simulation of the drawing process of tungsten wires
(International Plansee Seminar <16, 2005, Reutte>)
In: Schade, P.: 16th International Plansee Seminar 2005. Selected presentations: Was held on May 30 - June 3, 2005 in Reutte, Tyrol. Amsterdam: Elsevier, 2006. (International journal of refractory metals & hard materials 24.2006,4. Special issue), pp. 338-342
urn:nbn:de:0011-n-438866
Eckardt, J.; Borth, O.; Busch, M.; Krombholz, A.; Lühe, P.:
An improved characterisation of long-fibre thermoplastics for numerical simulation of components
(Polymer Processing Society (Annual Meeting PPS) <21, 2005, Leipzig>)
In: Polymer Processing Society. 21st Annual Meeting. CD-ROM. Leipzig, 2005
urn:nbn:de:0011-n-292993
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
SimBAU - Kompetenzzentrum Bauteilsimulation: Abschlussbericht, Laufzeit: 01.03.2000 bis 31.12.2004
Freiburg/Brsg.: Fraunhofer IWM, 2005
(Wissenschaftlicher Bericht - Fraunhofer-Institut für Werkstoffmechanik 2005,3)
Schmitt, W.; Benevolenski, O.; Walde, T.; Krasowsky, A.:
Material characterization for simulation of sheet metal forming
(International Conference on Computational Plasticity (COMPLAS) <8, 2005, Barcelona>)
In: Owen, D.R.J.: Computational plasticity. Fundamentals and applications: Proceedings of the Eighth International Conference on Computational Plasticity held in Barcelona, Spain, 5th - 7th September 2005. Barcelona: CIMNE, 2005, 4 pp.
Knoll, H.; Schischka, J.; Petzold, M.:
Bestimmung mechanischer Eigenschaften von Drahtbondkontaktierungen mittels instrumentierter Eindringprüfung
(Tagung Werkstoffprüfung <2004, Neu-Ulm>)
In: Pohl, M.: Werkstoffprüfung 2004. Tagungsband: Konstruktion, Qualitätssicherung und Schadensanalyse; Vortragstexte der Tagung Werkstoffprüfung, 25. - 26. November 2004 in Neu-Ulm. Frankfurt: Werkstoff-Informationsgesellschaft, 2004
urn:nbn:de:0011-n-297842
Westerheide, R.; Adler, J. ; Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.; Fraunhofer-Institut für Keramische Technologien und Sinterwerkstoffe -IKTS-, Dresden:
Material- und Bauteilqualifizierung keramischer Heißgasfilterelemente: Abschlussbericht zum BMBF-Projekt 0326866F. Förderzeitraum 01.07.1999 - 31.12.2002, Berichtszeitraum 01.07.1999 - 31.12.2002
Freiburg/Brsg.: Fraunhofer IWM, 2003
(Bericht - Fraunhofer-Institut für Werkstoffmechanik W 2003,2)
Westerheide, R.; Wehd, C. von der; Rehak, P.; Adler, J.:
Evaluation of mechanical properties and structural changes of ceramic filter materials for hot gas cleaning under simulated process conditions
(International Symposium on Gas Cleaning at High Temperature <5, 2002, Morgantown/West Virginia>)
In: 5th International Symposium on Gas Cleaning at High Temperature 2002. Online im WWW, 2002
urn:nbn:de:0011-n-186285
Westerheide, R.; Wehd, C. von der; Walch, A.; Baumgarten, J.:
Vibration behavior of ceramic hot gas filter elements: Analysis and characterisation of mechanical properties
(International Symposium on Gas Cleaning at High Temperature <5, 2002, Morgantown/West Virginia>)
In: 5th International Symposium on Gas Cleaning at High Temperature 2002. Online im WWW, 2002
urn:nbn:de:0011-n-186319
Kuna, M.:
Ein Energiebilanzintegrale für Risse in piezoelektrischen Werkstoffen unter elektrischen und mechanischen Beanspruchungen
In: Technische Mechanik, Vol.15 (1995), pp.195-204