Fraunhofer IWM


Scientific Publications


Abdel-Wahed, S.A.; Koplin, C.; Jaeger, R.; Scherge, M.:
On the transition from static to dynamic boundary friction of lubricated PEEK for a spreading adhesive contact by macroscopic oscillatory tribometry
In: Lubricants, Vol.5 (2017), No.3, Art. 21, 9 pp.
Abdul Hamid, Z.M.; Hohe, J.; Gall, M.; Fliegener, S.; Gumbsch, P.:
Fatigue damage and degradation model for carbon fibre reinforced polymer materials
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <88, 2017, Weimar>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.17 (2017), No.1, pp.259-260
Adamovic, N.; Asinari, P.; Goldbeck, G.; Hashibon, A.; Hermansson, K.; Hristova-Bogaerds, D.; Koopmans, R.; Verbrugge, T.; Wimmer, E.:
European materials modelling council
(World Congress on Integrated Computational Materials Engineering (ICME) <4, 2017, Ypsilanti/Mich.>)
In: Mason, P.: 4th World Congress on Integrated Computational Materials Engineering, ICME 2017. Proceedings: May 21-25, 2017, Ypsilanti, Michigan. Cham: Springer International Publishing, 2017. (The minerals, metals & materials series), pp. 79-92
Amann, C.:
Probabilistic fracture mechanics of forged rotor disks
Karlsruhe, Inst. für Technologie (KIT), Diss., 2017
Amann, T.; Kailer, A.; Oberle, N.; Li, K.; Walter, M.; List, M.; Rühe, J.:
Macroscopic superlow friction of steel and diamond-like carbon lubricated with a formanisotropic 1,3-diketone
In: ACS omega, Vol.2 (2017), No.11, pp.8330-83442
Andrieux, F.; Sun, D.Z.; Burblies, A.:
Multiscale Approach for the Damage Modeling of an Aluminum Casting Alloy with Stochastic Character
In: Materials Science Forum, Vol.877 (2017), pp.680-685
Andrieux, F.; Sun, D.-Z.; Burblies, A.:
Damage modelling of an aluminum cast alloy accounting for pore morphology
(Aluminium Two Thousand World Congress <10, 2017, Verona>)
In: Università di Bologna: Aluminium Two Thousand World Congress and International Conference on Extrusion and Benchmark ICEB 2017: 20-24 June 2017, Verona, DVD. Modena: Interall, 2017, 8 pp.
Baiker, M.; Pagenkopf, J.; Helm, D.:
Untersuchung der thermomechanischen Eigenschaften von additiv gefertigtem IN718 mit Hilfe von Mikrostruktursimulationen
In: NAFEMS Magazin. Online journal, Vol.43 (2017), No.3, pp.52-58
Balázsi, C.; Fogarassy, Z.; Tapasztó, O.; Kailer, A.; Schröder, C.; Parchoviansky, M.; Galusek, D.; Dusza, J.; Balázsi, K.:
Si3N4/graphene nanocomposites for tribological application in aqueous environments prepared by attritor milling and hot pressing
(International Workshop on Graphene/Ceramic Composites (WGCC) <2016, Cuenca>)
In: Journal of the European Ceramic Society, Vol.37 (2017), No.12, pp.3797-3804
Beckert, Wieland; Stockmann, Jens; Koplin, Christof:
Auslegungsplattform für keramische Schraubendruckfedern
(Ilmenauer Federntag <4, 2017, Ilmenau>)
In: TU Ilmenau: Neueste Erkenntnisse zu Funktion, Berechnung, Prüfung und Gestaltung von Federn und Werkstoffen: Ilmenauer Federntag 2017, 20.09.2017, Ilmenau. Ilmenau: Verlag ISLE, 2017, pp. 25-35
Beckmann, C.; Hohe, J.:
Modeling transgranular crack growth in random 3D grain structures under cyclic loading
In: Probabilistic engineering mechanics, Vol.50 (2017), pp.45-52
Berwind, M.F.; Hashibon, A.; Fromm, A.; Gurr, M.; Burmeister, F.; Eberl, C.:
Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization
In: Microfluidics and nanofluidics, Vol.21 (2017), No.9, Art. 144, 7 pp.
Bierwisch, C.; Polfer, P.:
Scaling laws for implicit viscosities in smoothed particle hydrodynamics
(International Conference on Micromechanics on Granular Media <8, 2017, Montpellier>)
In: Radjai, F.: Powders and Grains 2017. 8th International Conference on Micromechanics on Granular Media: Montpellier, France, July 3-7, 2017. Les Ulis: EDP Sciences, 2017. (EPJ Web of Conferences 140), Art. 15008, 4 pp.
Blug, Andreas; Regina, David Joel; Eckmann, Stefan; Senn, M.; Eberl, Christoph; Bertz, Alexander; Carl, Daniel:
Marker-free GPU-based digital image correlation system for high-temperature strain-controlled fatigue measurements: Presentation held at Annual International DIC Society Conference 2017, November 6-9, 2017, Barcelona, Spain
(International Digital Image Correlation Society (DIC Conference) <2017, Barcelona>)
2017
urn:nbn:de:0011-n-4770841
Böttcher, R.; Seidelmann, M.; Scherge, M.:
Sliding of UHMWPE on ice: Experiment vs. modeling
In: Cold regions science and technology, Vol.141 (2017), pp.171-180
Breinlinger, T.; Schubert, R.; Hashibon, A.; Kraft, T.:
Modelling die filling for powders with complex rheology: A new DEM contact-model: Presented at 19th Plansee Seminar 2017, 29 May - 2 June, 2017, Reutte/Tirol, Österreich
(Plansee Seminar <19, 2017, Reutte>)
2017
urn:nbn:de:0011-n-4733640
Brügner, O.; Reichenbach, T.; Sommer, M.; Walter, M.:
Substituent correlations characterized by Hammett constants in the Spiropyran-Merocyanine transition
In: Journal of physical chemistry. A, Vol.121 (2017), No.13, pp.2683-2687
urn:nbn:de:0011-n-4705012
Butcher, T.A.; Körner, W.; Krugel, G.; Elsässer, C.:
Dependence of magnetisation and magnetocrystalline anisotropy on site distribution of alloying elements in RE-TM phases with ThMn12 structure
In: Journal of magnetism and magnetic materials, Vol.441 (2017), pp.1-5
Butz, Alexander; Pagenkopf, Jan; Baiker, Maria; Silbermann, Katja; Landgrebe, Dirk:
Virtuelle Kennwertermittlung für die Umformsimulation von Feinblechen - Teil 2
Hannover: EFB, 2017
(EFB-Forschungsbericht 464)
ISBN 978-3-86776-514-5
ISBN 3-86776-514-6
Chan, N.; Balakrishna, S.G; Klemenz, A.; Moseler, M.; Egberts, P.; Bennewitz, R.:
Contrast in nanoscale friction between rotational domains of graphene on Pt(111)
In: Carbon, Vol.113 (2017), pp.132-138
Codrignani, A.; Savio, D.; Magagnato, F.; Frohnapfel, B.:
A scaling parameter for pressure losses and thermal effects in lubricant flows with viscous dissipation
In: Tribology international, Vol.113 (2017), pp.238-244
Colonna, F.; Elsässer, C.:
First principles DFT study of interstitial hydrogen and oxygen atoms in the MAX phase Ti2AlN
In: RSC Advances, Vol.7 (2017), No.60, pp.37852-37857
Cui, K.; Mali, K.S.; Wu, D.; Feng, X.; Müller, K.; Walter, M.; Freyter, S. de; Mertens, S.F.L.:
Reversible anion-driven switching of an organic 2D crystal at a solid-liquid interface
In: Small, Vol.13 (2017), No.46, Art. 1702379, 8 pp.
Echlin, M.P.; Titus, M.S.; Straw, M.; Gumbsch, P.; Pollock, T.M.:
Materials response to glancing incidence femtosecond laser ablation
In: Acta Materialia, Vol.124 (2017), pp.37-46
urn:nbn:de:0011-n-4360190
Eckmann, S.; Schweizer, C.:
Characterization of fatigue crack growth, damage mechanisms and damage evolution of the nickel-based superalloys MAR-M247 CC (HIP) and CM-247 LC under thermomechanical fatigue loading using in situ optical microscopy
In: International journal of fatigue, Vol.99 (2017), Pt.2, pp.235-241
Fabini, D.H.; Labram, J.G.; Lehner, A.J.; Bechtel, J.S.; Evans, H.A.; Van Der Ven, A.; Wudl, F.; Chabinyc, M.L.; Seshadri, R.:
Main-Group Halide Semiconductors Derived from Perovskite: Distinguishing Chemical, Structural, and Electronic Aspects
In: Inorganic Chemistry, Vol.56 (2017), No.1, pp.11-25
Farajian, M.; Hardenacke, V.; Pfeiffer, W.; Klaus, M.; Rebelo Kornmeier, J.:
Numerical and experimental investigations on shot-peened high-strength steel by means of hole drilling, X-ray, synchrotron and neutron diffraction analysis
In: MP materials testing, Vol.59 (2017), No.2, pp.161-165
Farajian, M.; Schubnell, J.; Luke, M.:
Surface Engineering: Lebensdauerverlängerung metallischer Komponenten durch mechanische Oberflächenbehandlung
In: wt Werkstattstechnik online, Vol.107 (2017), No.1-2, pp.94-95
Fiedler, J.; Thiyam, P.; Kurumbail, A.; Burger, F.A.; Walter, M.; Persson, C.; Brevik, I.; Parsons, D.F.; Boström, M.; Buhmann, S.Y.:
Effective polarizability models
In: Journal of physical chemistry. A, Vol.121 (2017), No.51, pp.9742-9751
Filippini, M.; Luke, M.; Varfolomeev, I.; Regazzi, D.; Beretta, S.:
Fatigue strength assessment of railway axles considering small-scale tests and damage calculations
(Workshop "Integrity of Railway Structures" <2016, Leoben>)
In: Procedia Structural Integrity, Vol.4 (2017), pp.11-18
Findeisen, C.; Hohe, J.; Kadic, M.; Gumbsch, P.:
Characteristics of mechanical metamaterials based on buckling elements
In: Journal of the Mechanics and Physics of Solids, Vol.102 (2017), pp.151-164
Fliegener, S.; Kennerknecht, T.; Kabel, M.:
Investigations into the damage mechanisms of glass fiber reinforced polypropylene based on micro specimens and precise models of their microstructure
In: Composites. Part B, Engineering, Vol.112 (2017), pp.327-343
urn:nbn:de:0011-n-4347888
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2016
Freiburg/Brsg.: Fraunhofer IWM, 2017
urn:nbn:de:0011-n-4415996
Fu, Z.; Freihart, M.; Schlordt, T.; Frey, T.; Kraft, T.; Greil, P.; Travitzky, N.:
Robocasting of carbon-alumina core-shell composites using co-extrusion
In: Rapid Prototyping Journal, Vol.23 (2017), No.2, pp.423-433
Genchev, G.; Doynov, N.; Varfolomeev, I.; Moroz, S.:
Gekoppeltes Simulationsverfahren zur Sicherheitsbewertung von Mehrlagenschweißungen unter Berücksichtigung lokaler Gefügezustände sowie fertigungs- und betriebsinduzierter Vorschädigung: Schlussbericht zu IGF-Vorhaben, Berichtszeitraum 01.06.2014-30.11.2016
Cottbus: Brandenburgische Technische Universität Cottbus, 2017
Giese, P.; Meschut, G.; Sommer, S.; Rochel, P.:
Characterisation of load-bearing capacity and failure behaviour of different mechanical joints under crash load of steel intensive structures
(International Conference on Steels in Cars and Trucks (SCT) <5, 2017, Noordwijkerhout>)
In: Wieland, H.-J.: 5th International Conference on Steels in Cars and Trucks, SCT 2017: Future trends in steel development, processing technologies and applications. Bringing the automotive, supplier and steel industries together; Proceedings; June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands. Düsseldorf: Verlag Stahleisen, 2017, 8 pp.
Gremmelspacher, Matthias; Gumbsch, Peter; Kübler, Rainer; Lang, Britta; Rist, Tobias:
Verfahren zum lokalen Umformen einer glatten Oberfläche eines aus Glas oder einer Glaskeramik gefertigten Substrates sowie ein mit dem Verfahren hergestelltes Bedienelement
2017
Günther, M.; Herfert, D.; Meschut, G.; Giese, P.; Sommer, S.; Rochel, P.:
CrasiFü - Daten- und prognosebasierte Generierung von Modellparametern für die Crashsimulation mechanisch gefügter Verbindungen
Dresden: GFaI, 2017
Gutwald, R.; Jaeger, R.; Lambers, F.M.:
Customized mandibular reconstruction plates improve mechanical performance in a mandibular reconstruction model
In: Computer methods in biomechanics and biomedical engineering, Vol.20 (2017), No.4, pp.426-435
Hemmesi, K.; Farajian, M.; Fatemi, A.:
Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses
In: International journal of fatigue, Vol.101 (2017), Pt.2, pp.271-281
Hemmesi, K.; Farajian, M.; Boin, M.:
Numerical studies of welding residual stresses in tubular joints and experimental validations by means of x-ray and neutron diffraction analysis
In: Materials and design, Vol.126 (2017), pp.339-350
Hohe, J.; Gall, M.; Gauch, H.; Fliegener, S.; Hamid, Z.M.B.A.:
A material model for prediction of fatigue damage and degradation of CFRP materials
(Symposium on Composites <21, 2017, Bremen>)
In: Herrmann, A.S.: 21st Symposium on Composites 2017: Selected, peer reviewed papers from the 21st Symposium on Composites, July 5-7, Bremen, Germany. Dürnten: Trans Tech Publications, 2017. (Key engineering materials 742), pp. 740-744
Hohe, J.; Beckmann, C.; Kennerknecht, T.; Preußner, J.; Farajian, M.; Luke, M.:
Experimental investigation and numerical simulation of fatigue crack formation in polycrystalline materials
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <88, 2017, Weimar>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.17 (2017), No.1, pp.245-246
Hötger, B.; Thiele, B.; Koch, C.; Gremmelspacher, M.; Rist, T.; Kübler, R.:
Lasergestütztes, automatisiertes Schneidverfahren zum Zuschnitt freier Formen und Modelle aus Verbundsicherheitsglas (VSG-Modelle)
In: Weller, B.: Glasbau 2017: Bauten und Projekte - Bemessung und Konstruktion - Forschung und Entwicklung - Bauprodukte und Bauarten. Berlin: Ernst & Sohn, 2017, pp. 445-452
Hubeth, F.; Baumgartner, J.:
Versagensverhalten von Mischschweißverbindungen unter mehrachsiger crashartiger und schwingender Beanspruchung am Beispiel von EMPT-Blechschweißungen. Schlussbericht: Berichtszeitraum: 01.01.2014 bis 31.06.2017
Freiburg/Brsg.: Fraunhofer IWM, 2017
Iwainsky, A.; Herfert, D.; Günther, M.; Sommer, S.; Rochel, P.; Meschut, G.; Hein, D.; Giese, P.:
Daten- und prognosebasierte Generierung von Modellparametern und Erweiterung einer Softwarebenutzeroberfläche für die Crashsimulation mechanisch gefügter Verbindungen
(Fügetechnisches Gemeinschaftskolloquium <7, 2017, Dresden>)
In: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. -EFB-: Gemeinsame Forschung in der Mechanischen Fügetechnik: Tagungsunterlagen mit CD des 7. Fügetechnischen Gemeinschaftskolloquiums am 12. und 13. Dezember 2017 in Dresden. Hannover: EFB, 2017. (EFB-Tagungsband T 45), pp. 69-76
Jacobs, T; Junge, T.; Pastewka, L.:
Quantitative characterization of surface topography using spectral analysis
In: Surface topography, Vol.5 (2017), No.1, Art. 013001, 19 pp.
Jänchen, R.; Fromm, A.:
Thin film thermocouples for heat conductive sealing
(European PLACE Conference <16, 2017, Basel>)
In: Technical Association of the Pulp and Paper Industry -TAPPI-: 16th TAPPI European PLACE Conference 2017: Basel, Switzerland, 22-24 May 2017. Red Hook, NY: Curran, 2017, pp. 385
Kailer, A.; Moser, T.; Walter, M.; Held, A.; Keunecke, M.; Stein, C.; Bewilogua, K.:
Herstellung, Modellierung und Bewertung nanostrukturierter hochtemperaturstabiler Schichten für Umformwerkzeuge - Nanowerk. Abschlussbericht
Freiburg/Brsg.: Fraunhofer IWM, 2017
Kertsch, C.; Helm, D.:
Thermodynamically consistent modelling of recrystallization and grain coarsening in precipitation‐hardened alloys
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <88, 2017, Weimar>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.17 (2017), No.1, pp.425-426
Khader, I.; Renz, A.; Kailer, A.:
A wear model for silicon nitride in dry sliding contact against a nickel-base alloy
In: Wear, Vol.376-377, Part A (2017), pp.352-362
urn:nbn:de:0011-n-4558969
Khader, I.; Rasche, S.; Lube, T.; Raga, R.; Degenhardt, U.; Kailer, A.:
Lifetime prediction of ceramic components - a case study on hybrid rolling contact
In: Engineering fracture mechanics, Vol.169 (2017), pp.292-308
urn:nbn:de:0011-n-4620851
Klitschke, S.; Reichert, T.; Trondl, A.; Huberth, F.:
Charakterisierung hochfester Karosserieblechwerkstoffe unter quasistatischer und crashartiger Scherbelastung
(Tagung Werkstoffprüfung <35, 2017, Berlin>)
In: Frenz, H.: Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Prüftechnik - Kennwertermittlung - Schadensvermeidung; Tagung "Werkstoffprüfung", 30. November und 01. Dezember 2017 in Berlin. Berlin: DVM, 2017, pp. 179-184
Klitschke, S.; Huberth, F.:
Influence of strain rate on the beginning of instable deformation and failure behavior from shear to multiaxial loading for a DP1000
(International Deep Drawing Research Group (IDDRG Conference) <36, 2017, Munich>)
In: Volk, W.: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming: 2-6 July 2017, Munich, Germany. Bristol: IOP Publishing, 2017. (Journal of physics. Conference series 896), Art. 012112, 8 pp.
Klitschke, S.; Huberth, F.:
Strain rate-dependent characterization of advanced high-strength steels under various multiaxial stress states for the determination of forming and failure limits
(International Conference on Steels in Cars and Trucks (SCT) <5, 2017, Noordwijkerhout>)
In: Wieland, H.-J.: 5th International Conference on Steels in Cars and Trucks, SCT 2017: Future trends in steel development, processing technologies and applications. Bringing the automotive, supplier and steel industries together; Proceedings; June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands. Düsseldorf: Verlag Stahleisen, 2017, 8 pp.
Krupp, U.; Wackermann, K.; Christ, H.-J.; Colliander, M.H.; Stiller, K.:
Intergranular Oxidation Effects During Dwell-Time Fatigue of High-Strength Superalloys
In: Oxidation of metals, Vol.88 (2017), No.1-2, pp.3-14
urn:nbn:de:0011-n-4348183
Kutelia, E.; Dzigrashvili, T.; Kukava, T.; Darsavelidze, G.; Kurashvili, I.; Riedel, H.; Donth, B.:
Study of inelastic/elastic properties and shear modulus of Z-phase strengthened ferritic steels in the range 25 - 750 ° C
In: Makhashvili, K.: Information and Computer Technology, Modeling and Control: Proceedings of the International Scientific Conference Devoted to the 85th Anniversary of Academician I. V. Prangishvili. New York: Nova Science Publishers, 2017, pp. 407-422
Kutelia, E.; Dzigrashvili, T.; Kukava, G.; Darsavelidze, I.; Kurashvili, I.; Riedel, H.; Donth, B.:
Characterization of physico-mechanical properties of Z-phase strengthened ferritic steels using internal friction measurements in the range 25 ÷ 750˚C
(International Advances in Applied Physics and Materials Science Congress & Exhibition (AMPAS) <6, 2016, Istanbul>)
In: Oral, A.Y.: 6th International Advances in Applied Physics and Materials Science Congress & Exhibition, AMPAS 2016. Proceedings: Istanbul, Turkey, 1-3 June 2016. Melville/NY: AIP Publishing, 2017. (AIP Conference Proceedings 1809), Art. 020030, 10 pp.
Kuwahara, T.; Moras, G.; Moseler, M.:
Friction regimes of water-lubricated diamond (111): Role of interfacial ether groups and tribo-induced aromatic surface reconstructions
In: Physical review letters, Vol.119 (2017), 9, Art. 096101, 6 pp.
Linsler, D.; Kümmel, D.; Nold, E.; Dienwiebel, M.:
Analysis of the running-in of thermal spray coatings by time-dependent stribeck maps
In: Wear, Vol.376-377 (2017), Pt.B, pp.1467-1474
urn:nbn:de:0011-n-4558988
Liu, F.; Rashidi, M.; Hald, J.; Reißig, L.; Andrén, H.-O.:
Microstructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650°C Challenge
In: Materials Science Forum, Vol.879 (2017), pp.1147-1152
Liu, L.; Yang, C.; Dienwiebel, M.:
Effect of surface roughness on wear rate of copper-zinc alloy under lubricated conditions
In: Mocaxue-xuebao = Tribology, Vol.37 (2017), No.5, pp.625-630
Liu, L.; Zhang, Z.C.; Dienwiebel, M.:
The running-in tribological behavior of Pb-free brass and its effect on microstructural evolution
In: Tribology letters, Vol.65 (2017), No.4, Art. 160, 9 pp.
urn:nbn:de:0011-n-4803811
Lüthi, B.; Ventelon, L.; Elsässer, C.; Rodney, D.; Willaime, F.:
First principles investigation of carbon-screw dislocation interactions in body-centered cubic metals
In: Modelling and simulation in materials science and engineering, Vol.25 (2017), No.8, Art. 084001, 14 pp.
Ma, Y.-S.; Sun, D.-Z.; Andrieux, F.; Zhang, K.-S.:
Influences of initial porosity, stress triaxiality and Lode parameter on plastic deformation and ductile fracture
In: Acta mechanica solida Sinica, Vol.30 (2017), No.5, pp.493-506
Maas, Peter; Riedel, H.; Schulze, V. :
Vorhersage der Kantenrissbildung beim Warmbandwalzen schwer umformbarer Nickelbasislegierungen: Experimente, Modellbildung und Simulation
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 14)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1167-8
urn:nbn:de:0011-n-4415832
Matthey, Björn; Herrmann, Mathias; Hörner, Martin; Geldern, Maike van; Kunze, Steffen; Blug, Bernhard; Michaelis, Alexander:
SiC-bonded diamond materials produced by pressureless silicon infiltration
In: Journal of Materials Research, Vol.32 (2017), No.17, pp.3362-3371
Mayer, U.; Reichert, T.; Tlatlik, J.:
Fracture mechanics at elevated loading rates in the ductile to brittle transition region
(Pressure Vessels and Piping Conference (PVP) <2017, Waikoloa/Hawaii>)
In: Zhu, X.-K.: ASME Pressure Vessels and Piping Conference 2017. Proceedings. Vol.6: Materials and fabrication. Tl.A: Presented at the ASME 2017 Pressure Vessels and Piping Conference, July 16-20, 2017, Waikoloa, Hawaii, USA. New York/NY.: ASME, 2017, Paper V06AT06A030, 10 pp.
Mee, Manuel; Scherge, Matthias; Ulrich, Sven; Schulze, Volker :
Mikrowellenplasmagestützte Prozessentwicklung zur Herstellung von Funktionsgradientenhartmetallen für die CVD-Diamantbeschichtung
Herzogenrath: Shaker, 2017
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2017
ISBN 978-3-8440-5161-2
ISBN 3-8440-5161-9
Meyer, F.; Blum, M.; Benkert, A.; Hauschild, D.; Jeyachandran, Y.L.; Wilks, R.G.; Yang, W.; Bär, M.; Heske, C.; Reinert, F.; Zharnikov, M.; Weinhardt, L.:
X-ray emission spectroscopy of proteinogenic amino acids at all relevant absorption edges
In: Journal of physical chemistry. B, Vol.121 (2017), No.27, pp.6549-6556
Mohseni-Mofidi, S.; Nutto, C.; Lagger, H.; Bierwisch, C.:
SPH simulations of magnetorheological abrasive flow machining at a microscopic scale
(International Smoothed Particle Hydrodynamics European Research Interest Community (SPHERIC Workshop) <12, 2017, Ourense>)
In: Crespo, A.J.C.: 12th International Smoothed Particle Hydrodynamics European Research Interest Community SPHERIC Workshop 2017. Proceedings: Ourense, 13-15 June 2017. Ourense: Universidade de Vigo, 2017, pp. 412-417
Morand, L.; Pagenkopf, J.; Helm, D.:
Material-based process-chain optimization in metal forming
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <88, 2017, Weimar>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.17 (2017), No.1, pp.709-710
Mutter, D.; Urban, D.; Elsässer, C.:
Systematic search for lithium ion conducting compounds by screening of compositions combined with atomistic simulation
In: MRS advances, Vol.2 (2017), No.9, pp.483-489
Pfeiffer, W.; Reisacher, E.:
Evaluation of thickness and residual stress of shallow surface regions from diffraction profiles
(International Conference on Residual Stresses (ICRS) <10, 2016, Sydney>)
In: Holden, T.M.: 10th International Conference on Residual Stresses, ICRS 2016: Sydney, Australia, 3-7 July, 2016. Millersville/PA: Materials Research Forum LLC, 2017. (Materials research proceedings 2), pp. 317-322
Pfeiffer, W.; Reisacher, E.; Windisch, M.; Kahnert, M.:
Effiziente Eigenspannungsanalyse reibrührgeschweißter Raumfahrt-Komponenten
In: Konstruktion, Vol.69 (2017), No.9, pp.70-75
Polfer, Pit; Gumbsch, P.; Frohnapfel, B. :
Entwicklung und Anwendung von SPH-Simulationsverfahren zur Untersuchung der Anisotropieentstehung beim Foliengießen
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 13)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1140-1
urn:nbn:de:0011-n-4350833
Quintus, C.; Maier, G.; Schweizer, C.; Friedmann, V.:
Creep-fatigue lifetime modelling of bellows made of AISI 316
(International Conference on Low Cycle Fatigue (LCF) <8, 2017, Dresden>)
In: Beck, T.: LCF 2017, Eighth International Conference on Low Cycle Fatigue: June 27-29, 2017, Dresden, Germany. Berlin: DVM, 2017, pp. 153-158
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.:
Damage progression in silicon nitride undergoing non-conforming hybrid cyclic contact
In: International journal of fatigue, Vol.105 (2017), pp.97-110
urn:nbn:de:0011-n-4644006
Raga, R.; Khader, I.; Chlup, Z.; Kailer, A.:
Experimental and numerical investigation of crack initiation and propagation in silicon nitride ceramic under rolling and cyclic contact
(International Conference on Fracture Fatigue and Wear (FFW) <6, 2017, Porto>)
In: Wahab, M.A.: 6th International Conference on Fracture Fatigue and Wear, FFW 2017. Proceedings: Porto, Portugal, 26-27 July 2017. Bristol: IOP Publishing, 2017. (Journal of physics. Conference series 843), Art. 012030, 10 pp.
Raga, Rahul; Scherge, Matthias; Seemann, Wolfgang :
Damage initiation and evolution in silicon nitride under cyclic and rolling contact
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 16)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2017
ISBN 978-3-8396-1189-0
urn:nbn:de:0011-n-4524400
Ramirez, E.C.; Klemenčič, R.; Klučka, M; Lang, B; Beisel, S.; Altorfer, H.; Koebel, M.M.; Malfait, W.J.:
Large-scale anodic bonding mediated by a liquid tin solder
In: Journal of materials processing technology, Vol.246 (2017), pp.69-76
Rasp, T.; Jamin, C.; Guillon, O.; Kraft, T.:
Cracking and shape deformation of cylindrical cavities during constrained sintering
In: Journal of the European Ceramic Society, Vol.37 (2017), No.8, pp.2907-2917
urn:nbn:de:0011-n-4452367
Reichert, T.; Tlatlik, J.; Böhme, W.; Siegele, D.:
Analyse und Validierung von bruchmechanischen Bewertungsmethoden für dynamische Beanspruchungen: Teilprojekt: Untersuchungen mit stoßbelasteten Biegeproben und Identifikation von statistisch abgesicherten dynamischen Bruchzähigkeits-Grenzkurven; Abschlussbericht; Reaktorsicherheitsforschung - Vorhaben Nr.: 1501472A
Freiburg/Brsg.: Fraunhofer IWM, 2017
Reiser, J.; Garrison, L.; Greuner, H.; Hoffmann, J.; Weingärtner, T.; Jäntsch, U.; Klimenkov, M.; Franke, P.; Bonk, S.; Bonnekoh, C.; Sickinger, S.; Baumgärtner, S.; Bolich, D.; Hoffmann, M.; Ziegler, R.; Konrad, J.; Hohe, J.; Hoffmann, A.; Mrotzek, T.; Seiss, M.; Rieth, M.; Möslang, A.:
Ductilisation of tungsten (W): Tungsten laminated composites
In: International journal of refractory metals and hard materials, Vol.69 (2017), pp.66-109
Renz, A.; Kürten, D.; Lehmann, O.:
Wear of hardfaced valve spindles in highly loaded stationary lean-burn large bore gas engines
In: Wear, Vol.376-377 (2017), pp.1652-1661
urn:nbn:de:0011-n-4558978
Rochel, P.; Sommer, S.; Bier, M.; Meschut, G.; Giese, P.; Hein, D.:
Charakterisierung und Modellierung von mechanischen Fügeverbindungen mit einseitiger Zugänglichkeit für den profilintensiven Leichtbau unter Crashbelastung: Abschlussbericht, Laufzeit: 01.08.2014 - 31.01.2017
Düsseldorf: FOSTA, 2017
Rucavado, E.; Jeangros, Q.; Urban, D.F.; Holovsky, J.; Remes, Z.; Duchamp, M.; Landucci, F.; Dunin-Borkowski, R.E.; Körner, W.; Elsässer, C.; Hessler-Wyser, A.; Morales-Masis, M.; Balif, C.:
Enhancing the optoelectronic properties of amorphous zinc tin oxide by subgap defect passivation: A theoretical and experimental demonstration
In: Physical Review. B, Vol.95 (2017), No.24, Art. 245204, 10 pp.
Scherge, M.; Knorring, J. von:
Wälzlagerschmierung mit Kupferkolloiden
(Fachtagung Gleit- und Wälzlagerungen <12, 2017, Schweinfurt>)
In: VDI-Gesellschaft Produkt- und Prozessgestaltung -GPP-: 12. VDI-Fachtagung Gleit- und Wälzlagerungen 2017: Gestaltung, Berechnung, Einsatz; mit Fachausstellung; Schweinfurt, 27. und 28. Juni 2017. Düsseldorf: VDI-Verlag, 2017. (VDI-Berichte 2308), pp. 31-37
Schlesinger, M.; Seifert, T.; Preussner, J.:
Experimental investigation of the time and temperature dependent growth of fatigue cracks in Inconel 718 and mechanism based lifetime prediction
(Workshop on Thermo-Mechanical Fatigue <3, 2016, Berlin>)
In: International journal of fatigue, Vol.99 (2017), Pt.2, pp.242-249
Schmidt, S.B.; Kempe, F.; Brügner, O.; Walter, M.; Sommer, M.:
Alkyl-substituted spiropyrans: Electronic effects, model compounds and synthesis of aliphatic main-chain copolymers
In: Polymer chemistry, Vol.8 (2017), No.35, pp.5407-5414
Schober, M.; Kuboki, T.; Ameri, E.; Hohe, J.; Gumbsch, P.:
Effects of process parameters on the interlaminar fracture toughness of GF-PA6-tapes
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <88, 2017, Weimar>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.17 (2017), No.1, pp.273-274
Schröder, C.; Kiemle, T.; Kailer, A.; Berthold, C.; Nickel, K.G.:
Cyclic contact loading of Y-TZP ceramics with spherical SSiC shape under ambient air and water-lubricated conditions
In: Journal of the European Ceramic Society, Vol.37 (2017), No.6, pp.2449-2458
Schröder, Christian; Scherge, M.; Hoffmann, M. :
Untersuchung tribologischer Systeme mit Y-TZP-Keramiken
Stuttgart: Fraunhofer Verlag, 2017
(Fraunhofer IWM Forschungsberichte 15)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2016
ISBN 978-3-8396-1176-0
urn:nbn:de:0011-n-4524422
Schubnell, J.; Hardenacke, V.; Farajian, M.:
Strain-based critical plane approach to predict the fatigue life of high frequency mechanical impact (HFMI)-treated welded joints depending on the material condition
In: Welding in the world, Vol.61 (2017), No.6, pp.1199-1210
Schulenberg, L.; Seelig, T.; Andrieux, F.; Sun, D.-Z.:
An anisotropic elasto-plastic material model for injection-molded long fiber-reinforced thermoplastics accounting for local fiber orientation distributions
In: Journal of composite materials : JCM, Vol.51 (2017), No.14, pp.2061-2078
Schulenberg, L.; Sun, D.-Z.; Seelig, T.:
Numerical Modelling of Damage Initiation and Failure of Long Fibre-Reinforced Thermoplastics
(Discussion Conference on "Deformation and Fracture behaviour of Polymers" (PolyMerTec) <14, 2014, Merseburg>)
In: Grellmann, W.: Deformation and fracture behaviour of polymer materials. Cham: Springer International Publishing, 2017. (Springer series in materials science 247), pp. 83-92
Schulz, K.; Sudmanns, M.; Gumbsch, P.:
Dislocation-density based description of the deformation of a composite material
In: Modelling and simulation in materials science and engineering, Vol.25 (2017), No.6, Art. 064003, 19 pp.
Schuster, L.:
Characterization and modelling of soft zones around spot welds in high strength steels
(International Conference on Steels in Cars and Trucks (SCT) <5, 2017, Noordwijkerhout>)
In: Wieland, H.-J.: 5th International Conference on Steels in Cars and Trucks, SCT 2017: Future trends in steel development, processing technologies and applications. Bringing the automotive, supplier and steel industries together; Proceedings; June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands. Düsseldorf: Verlag Stahleisen, 2017, 8 pp.
Schuster, S.; Pagenkopf, J.; Gibmeier, J.:
Local residual stress analysis on deep drawn cups by means of the incremental hole-drilling method
(International Conference on Residual Stresses (ICRS) <10, 2016, Sydney>)
In: Holden, T.M.: 10th International Conference on Residual Stresses, ICRS 2016: Sydney, Australia, 3-7 July, 2016. Millersville/PA: Materials Research Forum LLC, 2017. (Materials research proceedings 2), pp. 187-192
Schweizer, C.; Eckmann, S.:
Assessment of fatigue crack growth under isothermal and thermomechanical fatigue loading using a time-dependent fracture mechanics approach
(International Conference on Low Cycle Fatigue (LCF) <8, 2017, Dresden>)
In: Beck, T.: LCF 2017, Eighth International Conference on Low Cycle Fatigue: June 27-29, 2017, Dresden, Germany. Berlin: DVM, 2017, pp. 255-260
Siegele, Dieter; Tempel, Peter; Eichheimer, Christian; Farajian, Majid; Veile, Ines:
Zum Einfluss von herstellungsbedingten Ungänzen auf das Festigkeitsverhalten von Bauteilen aus Stahlguss
In: Giesserei. Special: Forschung und Innovation, (2017), No.2, pp.28-43
urn:nbn:de:0011-n-4777568
Sommer, S.; Schuster, L.; Schreyer, F.; Tümkaya, G.; Hein, D.:
Charakterisierung und Modellierung der Beeinflussung des Bauteilverhaltens durch Erweichungszonen an Schweißpunkten höchst- und ultrahochfester Stähle unter Crashbelastung
Düsseldorf: FOSTA, 2017
Stauffert, O.; Ghassemizadeh, R.; Walter, M.:
Spectroscopic signatures of triplet states in acenes
In: Journal of Physics. B, Atomic, molecular and optical physics, Vol.50 (2017), No.15, Art. 154007, 9 pp.
Stoyanov, P.; Schneider, J.; Rinke, M.; Ulrich, S.; Nold, E.; Dienwiebel, M.; Stüber, M.:
Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings
In: Surface and coatings technology, Vol.321 (2017), pp.366-377
urn:nbn:de:0011-n-4701383
Stricker, M.:
Die Übertragung von mikrostrukturellen Eigenschaften aus der diskreten Versetzungsdynamik in Kontinuumsbeschreibungen
Karlsruhe: KIT Scientific Publishing, 2017
(Schriftenreihe des Instituts für Angewandte Materialien, Karlsruher Institut für Technologie 66)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2017
ISBN 978-3-7315-0658-4
Stricker, M.; Weygand, D.; Gumbsch, P.:
Irreversibility of dislocation motion under cyclic loading due to strain gradients
In: Scripta materialia, Vol.129 (2017), pp.69-73
urn:nbn:de:0011-n-4357578
Sun, D.-Z.; Müller, S.:
Verbesserte Simulation des Strangpressens von Aluminiumprofilen mit Gefügeberechnung: Schlussbericht; Berichtszeitraum: 01.07.2014 bis 30.06.2017
Berlin: WirtschaftsVereinigung Metalle, 2017
Sun, D.Z.; Krawiec, M.; Hooputra, H.:
Characterization and modelling of the damage behavior of extruded aluminum profiles for crash simulations
(International Conference on Aluminium Alloys (ICAA) <15, 2016, Chongqing>)
In: Liu, Q.: Aluminium alloys 2016 - ICAA 2016: Selected, peer reviewed papers from the 15th International Conference on Aluminium Alloys (ICAA15), June 12-16, 2016, Chongqing, China. Durnten-Zurich: TTP, 2017. (Materials Science Forum 877), pp. 674-679
Tempel, P.; Reißig, L.; Eichheimer, C.; Farajian, M.; Luke, M.; Siegle, D.:
Einfluss von herstellungsbedingten Ungänzen auf das Werkstoffverhalten von Stahlguss
Düsseldorf: FVG, 2017
urn:nbn:de:0011-n-5377685
Tlatlik, J.; Siegele, D.:
Cleavage fracture assessment of transient thermo-mechanical loading situations by local approach
In: Engineering fracture mechanics, Vol.178 (2017), pp.512-526
urn:nbn:de:0011-n-4452841
Tlatlik, J.; Reichert, T.:
Correlation of fractographic examinations with numerical calculations regarding dynamic fracture
(Pressure Vessels and Piping Conference (PVP) <2017, Waikoloa/Hawaii>)
In: Li, B.: ASME Pressure Vessels and Piping Conference 2017. Proceedings. Vol.3B: Design and analysis: Presented at the ASME 2017 Pressure Vessels and Piping Conference, July 16-20, 2017, Waikoloa, Hawaii, USA. New York/NY.: ASME, 2017, Paper No.PVP2017-65042, 9 pp.
Tlatlik, J.:
Investigation of cleavage fracture under dynamic loading conditions: Part I fractographic analysis
In: Engineering fracture mechanics, Vol.184 (2017), pp.39-50
urn:nbn:de:0011-n-4644099
Tlatlik, J.:
Investigation of cleavage fracture under dynamic loading conditions: Part II numerical analysis
In: Engineering fracture mechanics, Vol.184 (2017), pp.22-38
urn:nbn:de:0011-n-4644084
Tschuncky, R.; Rabung, M.; Youssef, S.; Farajian, M.; Luke, M.:
Trennung von Spannungs- und Gefügeeinflüssen in der zerstörungsfreien mikromagnetischen Werkstoffcharakterisierung zur Bewertung der Anlagensicherheit. Abschlussbericht: Reaktorsicherheitsforschung - Vorhaben-Nr.: 1501523
Saarbrücken: Fraunhofer IZFP, 2017
Urban, D.:
Neue Chromstähle für Hochtemperaturanwendungen
In: Stahl und Eisen, Vol.137 (2017), No.4, pp.86-87
Urban, D.F; Elsässer, C.:
Atomic defects and dopants in ternary Z-phase transition-metal nitrides CrMN with M=V, Nb, Ta investigated with density functional theory
In: Physical Review. B, Vol.96 (2017), No.10, Art. 104107, 10 pp.
Varfolomeev, I.; Moroz, S.; Siegele, D.; Kadau, K.; Amann, C.:
Study on fatigue crack initiation and propagation from forging defects
(International Symposium on Fatigue Design and Material Defects (FDMD) <3, 2017, Lecco>)
In: Procedia Structural Integrity, Vol.7 (2017), pp.359-367
Vitek, V.; Lin, Y.-S.; Mrovec, M.:
Development of bond-order potentials for BCC transition metals
(International Conference "Materials Structure & Micromechanics of Fracture" (MSMF) <8, 2016, Brno>)
In: Sandera, P.: Materials structure & micromechanics of fracture VIII: Selected, peer reviewed papers from the 8th International Conference "Materials Structure & Micromechanics of Fracture (MSMF8)", June 27-29, 2016, Brno, Czech Republic. Durnten-Zurich: TTP, 2017. (Solid state phenomena 258), pp. 3-10
Zapara, M.; Augenstein, E.; Helm, D.:
Schädigungsarmes virtuelles Prozessdesign
In: Konstruktion, Vol.69 (2017), No.7-8, pp.IW14-IW16
Zhang, H.; Senn, M.; Sui, T.; Lunt, A.; Brandt, L.R.; Papadaki, C.; Ying, S.; Salvati, E.; Eberl, C.; Korsunsky, A.M.:
On the upper and lower bounds of correlation window size in digital image correlation analysis
(World Congress on Engineering (WCE) <25, 2017, London>)
In: Ao, S.I.: World Congress on Engineering, WCE 2017: 5-7 July, 2017, Imperial College London, London, U.K.. Hong Kong: Newswood Limited, 2017. (Lecture notes in engineering and computer science 2229), pp. 456-459
Ziegler, T.; Jaeger, R.; Koplin, C.:
A design, mechanical rating, and load adaptation method for cellular components for additive manufacturing
In: The International Journal of Advanced Manufacturing Technology, Vol.90 (2017), No.9, pp.2875-2884
urn:nbn:de:0011-n-4228606