Fraunhofer IWM


Scientific Publications


Aabdin, Z.; Peranio, N.; Eibl, O.; Töllner, W.; Nielsch, K.; Bessas, D.; Hermann, R.P.; Winkler, M.; König, J.; Böttner, H.; Pacheco, V.; Schmidt, J.; Hashibon, A.; Elsässer, C.:
Nanostructure, excitations, and thermoelectric properties of Bi2Te3-based nanomaterials
(International Conference on Thermoelectrics (ICT) <30, 2011, Traverse City/Mich.>)
In: Journal of Electronic Materials, Vol.41 (2012), No.6, pp.1792-1798
Adhikari, R.; Brostow, W.; Datashvili, T.; Henning, S.; Menard, B.; Menard, K.P.; Michler, G.H.:
Effect of surfactant treated boehmite nanoparticles on properties of block copolymers
In: Materials research innovations, Vol.16 (2012), No.1, pp.19-24
urn:nbn:de:0011-n-1987061
Albina, J.-M.; Elsässer, C.; Weissmüller, J.; Gumbsch, P.; Umeno, Y.:
Ab initio investigation of surface stress response to charging of transition and noble metals
In: Physical Review. B, Vol.85 (2012), No.12, Art. 125118, 5 pp.
Altenbach, H.; Dresbach, C.; Petzold, M.:
Characterizing the anisotropic hardening behavior of aluminum bonding wires
(International Conference on Advanced Computational Engineering and Experimenting (ACE-X) <4, 2010, Paris>)
In: Öchsner, A.: Materials with complex behaviour II: Properties, non-classical materials and new technologies. The 4th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2010, was held in Paris, France, from 05 to 07 July 2010]. Berlin: Springer, 2012. (Advanced structured materials 16), pp. 583-598
Altmann, F.; Beyersdorfer, J.; Schischka, J.; Krause, M.; Franz, G.; Kwakman, L.:
Cross section analysis of Cu filled TSVs based on high throughput plasma-FIB milling
(International Symposium for Testing and Failure Analysis (ISTFA) <38, 2012, Phoenix/Ariz.>)
In: American Society for Metals -ASM-, Metals Park/Ohio: ISTFA 2012, conference proceedings from the 38th International Symposium for Testing and Failure Analysis: November 11-15, 2012, Phoenix Convention Center, Phoenix, Arizona, USA. Materials Park, Ohio: ASM International, 2012, pp. 39-43
Altmann, F.; Petzold, M.:
Emerging techniques for 3-D integrated system-in-package failure diagnostics
In: Electronic device failure analysis : EDFAS, Vol.14 (2012), No.2, pp.14-20
urn:nbn:de:0011-n-2066074
Amann, T.; Dold, C.; Kailer, A.:
Rheological characterization of ionic liquids and ionic liquid crystals with promising tribological performance
In: Soft matter, Vol.8 (2012), No.38, pp.9840-9846
urn:nbn:de:0011-n-2170738
Bachurin, D.V.; Gumbsch, P.:
Elastic and plastic anisotropy after straining of nanocrystalline palladium
In: Physical Review. B, Vol.85 (2012), No.8, Art.085407, 9 pp.
Bakowskie, R.; Kesser, G.; Richter, R.; Lausch, D.; Eidner, A.; Clemens, P.; Petter, K.:
Fast method to determine the structural defect density of 156 x 156 mm2 Mc-Si wafers
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.179-184
urn:nbn:de:0011-n-2364584
Bartel, T.; Lauer, K.; Heuer, M.; Kaes, M.; Walerysiak, M.; Gibaja, F.; Lich, J.; Bauer, J.; Kirscht, F.:
The effect of Al and Fe doping on solar cells made from compensated silicon
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.45-52
Beckmann, C.; Hohe, J.:
Analysis of uncertainty effects in sandwich structures with disordered cores - probabilistic homogenization of core material
(International Conference on Sandwich Structures (ICSS) <10, 2012, Nantes>)
In: Casari, P.: 10th International Conference on Sandwich Structures, ICSS-10. Book of abstracts: 27th - 29th August 2012, Nantes, France. Nantes: Université de Nantes, 2012, pp. 71-72
Beckmann, C.; Hohe, J.:
Assessment of material uncertainties in solid foams based on local homogenization procedures
(International Symposium on the Mechanics of Liquid and Solid Foams <2011, Austin/Tex.>)
In: Kyriakides, S.: Mechanics of Liquid and Solid Foams: Held at the University of Texas at Austin, May 8 - 13, 2011; International symposium on the Mechanics of Liquid and Solid Foams; Sixteen papers. Amsterdam: Elsevier, 2012. (International journal of solids and structures 49.2012, Nr.19/20), pp. 2807-2822
Beckmann, C.; Hohe, J.:
Numerical assessment of disorder effects in metal foam core sandwich beams based on a local homogenization procedure
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <83, 2012, Darmstadt>)
In: Alber, H.-D.: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Special issue: March 26-30, 2012, Darmstadt, Germany. Weinheim: Wiley-VCH, 2012. (Proceedings in applied mathematics and mechanics 12.2012, Nr.1), pp. 415-416
Bercioux, D.; Mayrhofer, L.:
Pseudo-spin filter in metallic single-walled carbon nanotubes
(International Conference on Nano/Micro Engineered and Molecular Systems (NEMS) <7, 2012, Kyoto>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012: Kyoto, Japan, 5 - 8 March 2012. New York, NY: IEEE, 2012, pp. 294-297
Bier, M.; Sommer, S.:
Advanced investigations on a simplified modeling method of self-piercing riveted joints for crash simulation: Presentation held at 11. LS-DYNA Forum, 9. - 10. Oktober 2012, Ulm
(LS-DYNA Forum <11, 2012, Ulm>)
2012
Boettge, B.; Schippel, F.; Naumann, F.; Berthold, L.; Lorenz, G.; Gerbach, R.; Bagdahn, J.; Petzold, M.:
Failure mechanisms and mechanical characterization of reactive bonded interfaces
(International Symposium on Semiconductor Wafer Bonding - Science, Technology and Applications <12, 2012, Honolulu/Hawaii>)
In: Goorsky, M.: Semiconductor Wafer Bonding 12. Science, Technology, and Applications: Held during PRiME 2012, October 7 to 12, 2012, Honolulu, Hawaii. Pennington, NJ: ECS, 2012. (ECS transactions 50.2012, Nr.7), pp. 215-225
Böhme, W.; Reichert, T.:
Bestimmung und Bewertung bruchmechanischer Kennwerte bei hohen Rissbelastungsraten für den RDB-Stahl 22 NiMoCr37
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <44, 2012, Darmstadt>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen. 44. Tagung des DVM-Arbeitskreises Bruchvorgänge, 14. und 15. Februar 2012, Darmstadt. Berlin: DVM, 2012. (DVM-Bericht 244), pp. 245-254
Böhme, W.; Lienhard, J.; Memhard, D.; Moninger, G.:
Charakterisierung und Modellierung von Stahl-Klebverbindungen bei crashartiger Zug- und Scher-Belastung
(Tagung Werkstoffprüfung <2012, Bad Neuenahr>)
In: Borsutzki, M.: Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Tagung Werkstoffprüfung 2012, 6. bis 7. Dezember 2012, Bad Neuenahr. Düsseldorf: Verlag Stahleisen, 2012, pp. 275-280
Böhme, W.; Memhard, D.; Brand, M.; Siegele, D.:
Failure behaviour of crash-relevant welded aluminium joints
In: Welding and cutting, Vol.11 (2012), No.1, pp.42-48
Böhme, W.;; eissig, L.:
Neue, höchstfeste ADI-Werkstoffe für den Automobilbau
In: Gießerei, Vol.99 (2012), No.7, pp.34-40
Böttge, B.; Klengel, S.; Schischka, J.; Lorenz, G.; Knoll, H.:
Microstructural and mechanical characterization of ceramic substrates with different metallization for power applications
(International Conference on Integrated Power Electronics Systems (CIPS) <7, 2012, Nuremberg>)
In: Energietechnische Gesellschaft -ETG-: CIPS 2012, 7th International Conference on Integrated Power Electronics Systems. Proceedings: March, 6 - 8, 2012, Nuremberg, Germany; incl. CD-ROM. Berlin: VDE-Verlag, 2012. (ETG-Fachbericht 133), pp. 291-296
Brand, M.; Hohe, J.; Siegele, D.:
Numerical investigations on the residual stress field in a cladded plate due to the cladding process
In: Welding in the world, Vol.56 (2012), No.5-6, pp.107-113
Brand, M.C.; Gumbsch, P.:
Weiterentwicklung von Methoden in der numerischen Schweißsimulation
Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
Burget, S.; Sommer, S.:
Characterization and modeling of fracture behavior of spot welded joints in hot-stamped ultra-high strength steels: Presentation held at 11. LS-DYNA Forum, 9. - 10. Oktober 2012, Ulm
(LS-DYNA Forum <11, 2012, Ulm>)
2012
Butenuth, A.; Moras, G.; Schneider, J.; Koleini, M.; Köppen, S.; Meißner, R.; Wright, L.B.; Walsh, T.R.; Ciacchi, L.C.:
Ab initio derived force-field parameters for molecular dynamics simulations of deprotonated amorphous-SiO 2/water interfaces
In: Physica status solidi. B, Vol.249 (2012), No.2, pp.292-305
Butz, A.; Helm, D.; Meier, R.:
Microstructural analysis and process chain simulation of copper-ribbons for solar cell interconnections
(European Solid Mechanics Conference (ESMC) <8, 2012, Graz>)
In: European Mechanics Society -EUROMECH-: ESMC 2012, 8th Eruopean Solid Mechanics Conference. Proceedings: July 9-13, 2012, Graz, Austria. Graz: Technische Universität Graz, 2012
Butz, A.; Meier, R.; Helm, D.:
Simulationsbasierte Untersuchung der Eigenschaften von Bauteilen aus Kupfer am Beispiel der Fertigungskette von Solarzellenverbindern
In: Metall, Vol.66 (2012), No.3, pp.92-95
Czurratis, P.; Hoffrogge, P.; Brand, S.; Altmann, F.; Petzold, M.:
Failure analysis using scanning acoustic microscopy for diagnostics of electronic devices and 3D system integration technologies
(International Symposium for Testing and Failure Analysis (ISTFA) <38, 2012, Phoenix/Ariz.>)
In: American Society for Metals -ASM-, Metals Park/Ohio: ISTFA 2012, conference proceedings from the 38th International Symposium for Testing and Failure Analysis: November 11-15, 2012, Phoenix Convention Center, Phoenix, Arizona, USA. Materials Park, Ohio: ASM International, 2012, pp. 100-105
Dold, C.; Amann, T.; Kailer, A.:
Influence of structural variations on imidazolium based ionic liquids
(International Colloquium Tribology <18, 2012, Ostfildern>)
In: Bartz, W.J.: Industrial and automotive lubrication. Book of synopses 2012: 18th International Colloquium Tribology, 10 - 12 January 2012, Stuttgart/Ostfildern. Ostfildern: TAE, 2012, pp. 172
Dragoi, V.; Czurratis, P.; Brand, S.; Beyersdorfer, J.; Patzig, C.; Krugers, J.; Schrank, F.; Siegert, J.; Petzold, M.:
Low temperature fusion wafer bonding quality investigation for failure mode analysis
(International Symposium on Semiconductor Wafer Bonding - Science, Technology and Applications <12, 2012, Honolulu/Hawaii>)
In: Goorsky, M.: Semiconductor Wafer Bonding 12. Science, Technology, and Applications: Held during PRiME 2012, October 7 to 12, 2012, Honolulu, Hawaii. Pennington, NJ: ECS, 2012. (ECS transactions 50.2012, Nr.7), pp. 227-239
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2012/1
In: Fraunhofer IWM Report, (2012), 4 pp.
Freiburg/Brsg.: Fraunhofer IWM
urn:nbn:de:0011-n-2012092
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2012/2
In: Fraunhofer IWM Report, (2012), 4 pp.
Freiburg/Brsg.: Fraunhofer IWM
urn:nbn:de:0011-n-2256696
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2011
Freiburg/Brsg.: Fraunhofer IWM, 2012
urn:nbn:de:0011-n-1957559
Gerlach, J.W.; Ivanov, T.; Neumann, L.; Höche, T.; Hirsch, D.; Rauschenbach, B.:
Epitaxial GaN films by hyperthermal ion-beam nitridation of Ga droplets
In: Journal of applied physics, Vol.111 (2012), No.11, Art.113521, 10 pp.
urn:nbn:de:0011-n-2364406
Greve, L.; Fehrenbach, C.:
Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells
In: Journal of power sources, Vol.214 (2012), pp.377-385
Grönhagen, N.; Järvi, T.T.; Miroslawski, N.; Hövel, H.; Moseler, M.:
Decay kinetics of cluster-beam-deposited metal particles
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.116 (2012), No.36, pp.19327-19334
Groscurth, S.; Müller, B.; Schwan, S.; Menzel, M.; Diekstall, F.; Senft, M.; Kendall, A.; Kommor, B.A.; Neumann, U.; Kalischuk, M.; Kawchuk, L.M.; Krzyzanek, V.; Heilmann, A.; Stubbs, G.; Twyman, R.M.; Prüfer, D.; Noll, G.A.:
Artificial forisomes are Ideal models of forisome assembly and activity that allow the development of technical devices
In: Biomacromolecules, Vol.13 (2012), No.10, pp.3076-3086
Großer, S.; Lausch, D.; Werner, M.; Swatek, S.; Mergner, M.; Naumann, V.; Hagendorf, C.:
Shunt analysis in solar cells - electro-optical classification and high resolution defect diagnostics
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.7-12
Gumbsch, P.; Heierli, J.:
Vorrichtung und Verfahren zur Reduzierung des Schadenpotentials einer Schneebrettlawine
2012
Hanke, Thomas; Lucas, Jörg; Heilmann, Andreas; Kaufmann, Andreas:
Mechanische Besonderheiten von Membrankissenkonstruktionen
In: Sedlbauer, Klaus (Ed.): Innovationen für die Baubranche: Beispiele aus Forschung und Entwicklung. Stuttgart: Fraunhofer Verlag, 2012, pp. 65-72
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.:
Enhancement of the micro mechanical basis for local approach cleavage models
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <83, 2012, Darmstadt>)
In: Alber, H.-D.: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Special issue: March 26-30, 2012, Darmstadt, Germany. Weinheim: Wiley-VCH, 2012. (Proceedings in applied mathematics and mechanics 12.2012, Nr.1), pp. 143-144
Heierli, J.; Gumbsch, P.; Sherman, D.:
Anticrack-type fracture in brittle foam under compressive stress
In: Scripta materialia, Vol.67 (2012), No.1, pp.96-99
urn:nbn:de:0011-n-2116351
Helm, D.; Baiker, M.; Bienger, P.:
Multiscale representation of the microstructure evolution and the mechanical properties of steel grade DC04 during the production process
(European Solid Mechanics Conference (ESMC) <8, 2012, Graz>)
In: European Mechanics Society -EUROMECH-: ESMC 2012, 8th Eruopean Solid Mechanics Conference. Proceedings: July 9-13, 2012, Graz, Austria. Graz: Technische Universität Graz, 2012
Henning, S.; Imam Khasim, H. R.; Michler, G. H.; Brandt, J.:
Hierarchically structured materials for bone regenerations: biomimetic morphology, micro-mechanics and properties
In: Macromolecular symposia, Vol.315 (2012), No.1, pp.84-97
Hirel, P.; Mrovec, M.; Elsässer, C.:
Atomistic simulation study of 110 dislocations in strontium titanate
In: Acta Materialia, Vol.60 (2012), No.1, pp.329-338
Höche, T.; Patzig, C.; Gemming, T.; Wurth, R.; Rüssel, C.; Avramov, I.:
Temporal evolution of diffusion barriers surrounding ZrTiO4 nuclei in lithia aluminosilicate glass-ceramics
In: Crystal growth and design, Vol.12 (2012), No.3, pp.1556-1563
Hohe, J.; Hardenacke, V.:
Analysis of uncertainty effects due to microstructural disorder in cellular or porous materials
In: International Journal of Solids and Structures, Vol.49 (2012), No.7-8, pp.1009-1021
urn:nbn:de:0011-n-2067426
Hohe, J.; Beckmann, C.:
Local probabilistic homogenization schemes for assesment of material uncertainties in solid foams
(International Association of Applied Mathematics and Mechanics (GAMM Annual Meeting) <83, 2012, Darmstadt>)
In: Alber, H.-D.: 83rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). Special issue: March 26-30, 2012, Darmstadt, Germany. Weinheim: Wiley-VCH, 2012. (Proceedings in applied mathematics and mechanics 12.2012, Nr.1), pp. 427-428
Hohe, J.; Hardenacke, V.; Fascio, V.; Girard, Y.; Baumeister, J.; Stöbener, K.; Weise, J.; Lehmhus, D.; Pattofatto, S.; Zeng, H.; Zhao, H.; Calbucci, V.; Rustichelli, F.; Fiori, F.:
Numerical and experimental design of graded cellular sandwich cores for multi-functional aerospace applications
In: Materials and design, Vol.39 (2012), pp.20-32
urn:nbn:de:0011-n-2062448
Hohe, J.; Beckmann, C.:
Prediction of the uncertainty in the response of foam core sandwich structures due to disordered microstructure of the material
(International Conference on Cellular Materials (CELLMAT) <2, 2012, Dresden>)
In: Deutsche Gesellschaft für Materialkunde e.V. -DGM-, Oberursel: Cellular Materials. Proceedings. CD-ROM: 7-9 November, 2012, Dresden; CELLMAT 2012. Dresden, 2012
Hohe, J.; Beckmann, C.:
Probabilistic homogenization of hexagonal honeycombs with perturbed microstructure
In: Mechanics of materials, Vol.49 (2012), pp.13-29
urn:nbn:de:0011-n-2064099
Hohe, J.; Beckmann, C.:
Probabilistic homogenization of solid foams with application to sandwich structures
(International Congress of Theoretical and Applied Mechanics (ICTAM) <23, 2012, Peking>)
In: Bai, Y.: 23rd International Congress of Theoretical and Applied Mechanics. Proceedings CD-ROM: August 19 - 24, 2012, Beijing, China. Beijing, 2012
Hölzer, S.; Ganß, M.; Schneider, K.; Knoll, K..; Weidich, R.:
Deformation mechanisms in lamellar SS/BS triblock copolymers
In: European polymer journal : EPJ, Vol.49 (2012), No.1, pp.261-269
Jaeger, Raimund; Graf, Careen; Kluger, Petra; Riester, Dominik; Meyer, Wolfdietrich; Bierwisch, Claas; Tovar, Günter E.M.; Engelhardt, Sascha; Refle, Oliver; Borchers, Kirsten; Seiler, Nadine; Krüger, Hartmut; Bremus-Koebberling, Elke A.; Wegener, Michael:
Device for producing three-dimensional structures in layers, comprises a print head assembly, a radiation source assembly, and a heat source, where the print head assembly is positioned in a controlled manner relative to a working plane
2012
Jahn, I.:
Schlagzäh-Modifizierung durch Faserkonzentrate
In: Fiber News, (2012), pp.9-10
Järvi, T.T.; Nordlund, K.:
Sputtering of freestanding metal nanocrystals
(International Conference on Ion Beam Modification of Materials (IBMM) <17, 2010, Montreal>)
In: Nuclear instruments and methods in physics research, Section B. Beam interactions with materials and atoms, Vol.272 (2012), pp.66-69
urn:nbn:de:0011-n-1899858
Jatzkowski, J.; Simon-Najasek, M.; Altmann, F.:
Novel techniques for dopant contrast analysis on real IC structures
(European Symposium on the Reliability of Electron Devices, Failure Physics and Analysis (ESREF) <23, 2012, Cagliari>)
In: Meneghesso, G.: 23rd European Symposium on the Reliability of Electron Devices, Failure Physics and Analysis: October 1 - 5, 2012, Cagliari, Italy. Amsterdam: Elsevier, 2012. (Microelectronics reliability 52.2012, Nr.9/10), pp. 2098-2103
Jesus, A.M.P. de; Ripoll, M.L.R.; Fernández-Canteli, A.; Castillo, E.; Pereira, H.F.S.G.:
Probabilistic fatigue assessment of a notched detail taking into account mean stress effects
In: Journal of pressure vessel technology, Vol.134 (2012), No.2, Art. 021203, 9 pp.
John, M.; Teich, B.; Schäuble, R.:
Monitoring CFRP/PMI foam core sandwich structures-observing thermal and hygroscopic strains
(International Conference on Sandwich Structures (ICSS) <10, 2012, Nantes>)
In: Casari, P.: 10th Internationl Conference on Sandwich Structures, ICSS-10. Book of abstracts: 27th - 29th August 2012, Nantes, France. Nantes: Université de Nantes, 2012, pp. 99
Kaufmann, K.; Swatek, S.; Werner, M.; Hagendorf, C.:
Characterization of laser structures in photovoltaic CIGS thin film systems
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 2802-2804
Kaule, F.; Koepge, R.; Schönfelder, S.:
Damage and breakage of silicon wafers during impact loading on the wafer edge
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 1179-1184
Khader, I.; Kürten, D.; Kailer, A.:
A study on the wear of silicon nitride in rolling-sliding contact
In: Wear, Vol.296 (2012), No.1-2, pp.630-637
Khare, C.; Gerlach, J.W.; Höche, T.; Fuhrmann, B.; Leipner, H.S.; Rauschenbach, B.:
Effects of annealing on arrays of Ge nanocolumns formed by glancing angle deposition
In: Applied surface science, Vol.258 (2012), No.24, pp.9762-9769
Khare, C.; Gerlach, J.W.; Patzig, C.; Rauschenbach, B.:
Ion beam sputter deposition of epitaxial Ag films on native oxide covered Si (100) substrates
In: Applied surface science, Vol.258 (2012), No.24, pp.9617-9622
Kieback, B.; Noethe, M.; Grupp, R.; Banhart, J.; Rasp, T.; Kraft, T.:
Analysis of particle rolling and intrinsic rotations in copper powder during sintering
In: Journal of Materials Science : JMS, Vol.47 (2012), No.20, pp.7047-7055
Klengel, R.; Stephan, T.; Petzold, M.; Schindler, S.; Schneider, J.; Spira, K.:
A proper alternative: Ultra sonic bonding for thin film solar cell interconnections
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 2864-2867
Koitzsch, Matthias; Lewke, Dirk; Kaule, Felix; Oswald, Marcus; Schoenfelder, Stephan; Turek, Marko; Büchel, Andreas; Zühlke, Hans-Ulrich:
Thermal laser separation - damage-free and Kerfless cutting of wafers and solar cells
(International Workshop on Crystalline Silicon Solar Cells (CSSC) <6, 2012, Aix-les-Bains>)
In: Institut National de L'Energie Solaire -INES-: 6th International Workshop on Crystalline Silicon for Solar Cells, CSSC 2012: October 8-11, 2012, Aix-les-Bains, France. Aix-les-Bains, 2012, 4 pp.
urn:nbn:de:0011-n-2281062
Körner, W.; Gumbsch, P.; Elsässer, C.:
Analysis of electronic subgap states in amorphous semiconductor oxides based on the example of Zn-Sn-O systems
In: Physical Review. B, Vol.86 (2012), No.16, Art.165210, 5 pp.
Korres, S.; Feser, T.; Dienwiebel, M.:
In situ observation of wear particle formation on lubricated sliding surfaces
In: Acta Materialia, Vol.60 (2012), No.1, pp.420-429
urn:nbn:de:0011-n-1889013
Krause, S.; Miclea, P.-T.; Schweizer, S.; Seifert, G.:
Structuring of transparent conductive oxide (TCO) films on glass by femtosecond laser pulses
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 464-466
Kroll, Matthias; Otto, Martin; Käsebier, Thomas; Füchsel, Kevin; Wehrspohn, Ralf; Kley, Ernst-Bernhard; Tünnermann, Andreas; Pertsch, Thomas:
Black silicon for solar cell applications
(Conference "Photonics for Solar Energy Systems" <4, 2012, Brussels>)
In: Wehrspohn, R.: Photonics for Solar Energy Systems IV: April 2012, Brussels, Belgium. Bellingham, WA: SPIE, 2012. (Proceedings of SPIE 8438), Paper 843817
Krombholz, A.; Voigt, P.:
Einsatz von faserverstärkten Kunststoffen für tragende Baukonstruktionen
In: Sedlbauer, Klaus (Ed.): Innovationen für die Baubranche: Beispiele aus Forschung und Entwicklung. Stuttgart: Fraunhofer Verlag, 2012, pp. 87-93
Lagger, H.; Bierwisch, C.; Peguiron, J.; Moseler, M.:
Partikelbasierte Simulation magnetorheologischer Flüssigkeiten für die Anwendung in Kupplungen
(International Association of the Engineering Modelling, Analysis and Simulation Community (NAFEMS deutschsprachige Konferenz) <1, 2012, Bamberg>)
In: International Association for the Engineering Analysis Community -NAFEMS-: Berechnung und Simulation - Anwendungen, Entwicklungen, Trends: NAFEMS deutschsprachige Konferenz 2012, 8. - 9. Mai 2012, Bamberg, Deutschland. Bernau am Chiemsee: NAFEMS Deutschland, 2012, 5 pp.
Lu, H.; Amann, T.; Kailer, A.:
Electric potentials effects on friction between silicon carbide surfaces in aqueous solutions
(Tribologie-Fachtagung <53, 2012, Göttingen>)
In: Gesellschaft für Tribologie -GfT-: Reibung, Schmierung und Verschleiß. Bd.1: Tribologische Systeme, Schmierstoffe und Schmierungstechnik, Zerspanungs- und Umformtechnik, prüfen, messen, kontrollieren: Forschung und praktische Anwendungen. 53. Tribologie-Fachtagung, 24. bis 26. September 2012 in Göttingen. Aachen: GfT, 2012, Vortrag 11, 8 pp.
Lucas, J.; Neuber, M.; Heilmann, A.:
Anwendung des Laserdurchstrahlschweißverfahrens im konstruktiven Membranbau
In: Sedlbauer, Klaus (Ed.): Innovationen für die Baubranche: Beispiele aus Forschung und Entwicklung. Stuttgart: Fraunhofer Verlag, 2012, pp. 80-86
Mäder, M.; Höche, T.; Rauschenbach, B.:
Non-periodic nanoscale templates by diffraction mask projection laser ablation
In: Physica status solidi. A, Vol.209 (2012), No.11, pp.2208-2211
Marchetto, D.; Benzig, R.; Korres, S.; Dienwiebel, M.:
Design and testing of ultrahigh vacuum microtribometer
In: Tribology - Materials, Surfaces & Interfaces, Vol.6 (2012), No.3, pp.95-101
Marchetto, D.; Held, C.; Hausen, F.; Wählisch, F.; Dienwiebel, M.; Bennewitz, R.:
Friction and wear on single-layer epitaxial graphene in multi-asperity contacts
In: Tribology letters, Vol.48 (2012), No.1, pp.77-82
Meier, Sven:
Verfahren zur Herstellung eines kohlenstoffhaltigen Schichtsystems sowie Vorrichtung zur Durchführung des Verfahrens
2012
Meißner, D.; Meyer, S.; Anspach, O.:
Enrichment of metal ions in virgin Si-surfaces
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.27-32
Meißner, D.; Hurka, B.; Zeh, J.; Sunder, K.; Koepge, R.; Wagner, T.; Moeller, H.-J.; Schoenfelder, S.; Anspach, O.:
Loss of wire tension in the wire web: Towards stable cutting conditions for all wafers
(International Workshop on Crystalline Silicon Solar Cells (CSSC) <6, 2012, Aix-les-Bains>)
In: Institut National de L'Energie Solaire -INES-: 6th International Workshop on Crystalline Silicon for Solar Cells, CSSC 2012: October 8-11, 2012, Aix-les-Bains, France. Aix-les-Bains, 2012
Merkle, L.; Sonner, M.; Petzold, M.:
Developing a model for the bond heel lifetime prediction of thick aluminium wire bonds
In: Soldering & surface mount technology, Vol.24 (2012), No.2, pp.127-134
urn:nbn:de:0011-n-2066925
Metzger, M.; Nieweg, B.; Seifert, T.:
Lebensdauervorhersage für die Graugusswerkstoffe EN GJS700, EN GJV450 und EN GJL250 bei kombinierter nieder- und hochfrequenter Belastung
In: Gießerei, Vol.99 (2012), No.4, pp.50-55
Metzger, M.; Seifert, T.:
A mechanism-based model for LCF/HCF and TMF/HCF life prediction: Multiaxial formulation, finite-element implementation and application to cast iron
In: Technische Mechanik, Vol.32 (2012), No.2-5, pp.435-445
urn:nbn:de:0011-n-2364596
Michaelis, S.; Rommel, C.E.; Endell, J.; Göring, P; Wehrspohn, R.; Steinem, C.; Janshoff, A.; Galla, H.; Wegener, J.:
Macroporous silicon chips for laterally resolved, multi-parametric analysis of epithelial barrier function
In: LAB on a chip, Vol.12 (2012), No.13, pp.2329-2336
Moseler, M.; Walter, M.; Yoon, B.; Landman, U.; Habibpour, V.; Harding, C.; Kunz, S.; Heiz, U.:
Oxidation state and symmetry of magnesia-supported Pd13Ox nanocatalysts influence activation barriers of CO oxidation
In: Journal of the American Chemical Society, Vol.134 (2012), No.18, pp.7690-7699
Mujtaba, A.; Keller, M.; Ilisch, S.; Radusch, H.J.; Thurn-Albrecht, T.; Saalwächter, K.; Beiner, M.:
Mechanical properties and cross-link density of styrene-butadiene model composites containing fillers with bimodal particle size distribution
In: Macromolecules, Vol.45 (2012), No.16, pp.6504-6515
Naumann, F.; Bernasch, M.; Brand, S.; Wünsch, D.; Vogel, K.; Czurratis, P.; Petzold, M.:
A study of factors influencing micro-chevron-testing of glass frit bonded interfaces
(International Symposium on Semiconductor Wafer Bonding - Science, Technology and Applications <12, 2012, Honolulu/Hawaii>)
In: Goorsky, M.: Semiconductor Wafer Bonding 12. Science, Technology, and Applications: Held during PRiME 2012, October 7 to 12, 2012, Honolulu, Hawaii. Pennington, NJ: ECS, 2012. (ECS transactions 50.2012, Nr.7), pp. 207-214
Naumann, V.; Otto, M.; Wehrspohn, R.B.; Werner, M.; Hagendorf, C.:
Interface and material characterization of thin ALD-Al2O3 layers on crystalline silicon
(International Conference on Crystalline Silicon Photovoltaics (SiliconPV) <2, 2012, Leuven>)
In: Energy Procedia, Vol.27 (2012), pp.312-318
Naumann, V.; Turek, M.; Hagendorf, C.:
PECVD- und ALD-Abscheidung und Charakterisierung von elektrischen Passivierungsschichten für die Photovoltaik
In: Univ. Halle-Wittenberg, Interdisziplinäres Zentrum für Materialwissenschaften -CMAT-: Interdisziplinäres Zentrum für Materialwissenschaften. Jahresbericht 2011. Halle/Saale: Martin-Luther-Universität Halle-Wittenberg, 2012, pp. 56-57
Nogueira, A.C.; Drechsler, K.; Hombergsmeier, E.:
Analysis of the static and fatigue strength of a damage tolerant 3D-reinforced joining technology on composite single lap joints
(European Conference on Spacecraft Structures, Materials & Environmental Testing <12, 2012, Noordwijk>)
In: Ouwehand, L.: 12th European Conference on Spacecraft Structures, Materials & Environmental Testing 2012. Proceedings. CD-ROM: 20 - 23 March 2012, ESTEC, Noordwijk, The Netherlands. Noordwijk: ESA Communications, 2012. (ESA SP 691)
Nutto, C.; Bierwisch, C.; Lagger, H.; Moseler, M.:
Towards simulations of abrasive flow machining
(Smoothed Particle Hydrodynamics European Research Interest Community (International SPHERIC Workshop) <7, 2012, Prato>)
In: Smoothed Particle Hydrodynamics European Research Interest Community -SPHERIC-: 7th International SPHERIC Workshop 2012. Proceedings: Prato, Italy, 29-30 May 2012. Prato: SPHERIC, 2012, pp. 29-31
Ockewitz, A.; Sun, D.-Z.; Andrieux, F.; Mueller, S.:
Simulation of hot extrusion of an aluminum alloy with modeling of microstructure
(International Conference on Extrusion and Benchmark (ICEB) <3, 2011, Bologna>)
In: Tomesani, L. et al.: Progress in extrusion technology and simulation of light metal alloys: Selected, peer reviewed papers from the 3rd International Conference on Extrusion and Benchmark (ICEB 2011). October 03 - 05, 2011, Bologna, Italy. Dürnten: Trans Tech Publications, 2012. (Key engineering materials 491), pp. 257-264
Olofsson, J.; Pettersson, M.; Teuscher, N.; Heilmann, A.; Larsson, K.; Grandfield, K.; Persson, C.; Jacobson, S.; Engqvist, H.:
Fabrication and evaluation of SixNy coatings for total joint replacements
In: Journal of materials science. Materials in medicine, Vol.23 (2012), No.8, pp.1879-1889
Pablos-Martín, A. de; Durán, A; Pascual, M. J.; Soria, S; Righini, G. C.; Ramírez, M. O.; Bausá, L. E.; Ristic, D.; Ferrari, M.; Höche, T.:
Transparent glass-ceramics: Crystallization mechanisms and optical properties
In: SPIE newsroom. Online journal, (2012), 4 pp.
Pastewka, L.; Mrovec, M.; Moseler, M.; Gumbsch, P.:
Bond order potentials for fracture, wear, and plasticity
In: MRS Bulletin, Vol.37 (2012), No.5, pp.493-503
urn:nbn:de:0011-n-2065821
Pastewka, L.; Sharp, T.A.; Robbins, M.O.:
Seamless elastic boundaries for atomistic calculations
In: Physical Review. B, Vol.86 (2012), No.7, Art.075459, 12 pp.
Patzig, C.; Höche, T.; Dittmer, M.; Rüssel, C.:
Temporal evolution of crystallization in MgO-Al2O3-SiO2-ZrO2 glass ceramics
In: Crystal growth and design, Vol.12 (2012), No.4, pp.2059-2067
Paul, H.; Fleckenstein, J.; Büter, A.; Luke, M.:
Ermittlung der mechanischen Eigenschaften von langfaserverstärkten Thermoplasten (LFT) auch im Hinblick auf den Einsatz in Materialverbünden
(Deutscher Verband für Materialforschung und -prüfung (DVM-Tag) <2012, Berlin>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Multimaterialsysteme. DVM-Tag 2012: Vorträge, 26. + 27. April 2012 . Berlin: DVM, 2012. (DVM-Bericht 679), pp. 121-132
Perlt, S.; Höche, T.; Dadda, J.; Müller, E.; Bauer Pereira, P.; Hermann, R.P.; Sarahan, M.; Pippel, E.; Brydson, R.:
Correlation between microstructure and thermoelectric properties of AgPb18SbTe20 (LAST-18)
(European Conference on Thermoelectrics (ECT) <9, 2011, Thessaloniki>)
In: Paraskevopoulos, K.M.: 9th European Conference on Thermoelectrics, ECT 2011: 28-30 September 2011, Thessaloniki, Greece. Woodbury, N.Y.: AIP, 2012. (AIP Conference Proceedings 1449), pp. 171-174
Perlt, S.; Höche, T.; Dadda, J.; Müller, E.; Bauer Pereira, P.; Hermann, R.; Sarahan, M.; Pippel, E.; Brydson, R.:
Microstructure analyses and thermoelectric properties of Ag1-xPb18Sb1+yTe20
In: Journal of solid state chemistry, Vol.193 (2012), pp.58-63
urn:nbn:de:0011-n-2066684
Phan Van, T.; Böhlke, T.:
Modeling the mesoscopic and macroscopic deformation behavior of the ferritic stainless steel DC04
Karlsruhe: KIT Scientific Publishing, 2012
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
Polvi, J.; Luukkonen, P.; Nordlund, K.; Järvi, T.T.; Kemper, T.W.; Sinnott, S.B.:
Primary radiation defect production in polyethylene and cellulose
In: Journal of physical chemistry. B, Vol.116 (2012), No.47, pp.13932-13938
Rasp, T.; Jamin, C.; Wonisch, A.; Kraft, T.; Guillon, O.:
Shape distortion and delamination during constrained sintering of ceramic stripes: Discrete element simulations and experiments
In: Journal of the American Ceramic Society, Vol.95 (2012), No.2, pp.586-592
urn:nbn:de:0011-n-2069240
Reichert, T.; Böhme, W.; Siegele, D.; Hug, M.; Schüler, J.:
Stoßartige Belastung. Vorhaben Nr. 289: Bruchmechanischer Festigkeitsnachweis für Maschinenbauteile unter stoßartigen Belastungen
Frankfurt, Main: FKM, 2012
(FKM-Forschungshefte 315)
Rublack T.; Krause, S.; Schweizer, S.; Seifert, G.:
Increasing solar-cell efficiency by femtosecond laser microstructuring
In: SPIE newsroom. Online journal, (2012), 3 pp.
Rublack, T.; Hartnauer, S.; Mergner, M.; Muchow, M.; Schade, M.; Leipner, H.S.; Seifert, G.:
Mechanism of selective removal of transparent layers on semiconductors using ultrashort laser pulses
(Conference "Frontiers in Ultrafast Optics - Biomedical, Scientific, and Industrial Applications" <12, 2012, San Francisco/Calif.>)
In: Heisterkamp, Alexander (Ed.): Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XII: 21 - 26 January 2012, Moscone Center, San Francisco, California United States. Bellingham, WA: SPIE, 2012. (Proceedings of SPIE 8247), Art. 82470Z
Rublack, T.; Schade, M.; Muchow, M.; Leipner, H.S.; Seifert, G.:
Proof of damage-free selective removal of thin dielectric coatings on silicon wafers by irradiation with femtosecond laser pulses
In: Journal of applied physics, Vol.112 (2012), No.2, Art.023521, 7 pp.
urn:nbn:de:0011-n-2227517
Sander, M.; Dietrich, S.; Pander, M.; Ebert, M.; Thormann, S.; Wendt, J.; Bagdahn, J.:
Investigations on cracks in embedded solar cells after thermal and mechanical loading
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 3188-3193
Schlimper, R.; John, M.; Rinker, M.; Schäuble, R.:
Influence of mesoscopic foam structure on face sheet debonding in CFRP foam core sandwich panels
(European Conference on Composite Materials (ECCM) <15, 2012, Venice>)
In: Quaresimin, M.: 15th European Conference on Composite Materials, ECCM 2012. Proceedings: June 24-28, 2012, Venice, Italy. Padua: University of Padova, 2012, 8 pp.
Schlimper, R.:
Mechanical in situ testing of closed cell rigid polymer foams via computed tomography
(International Conference on Cellular Materials (CELLMAT) <2, 2012, Dresden>)
In: Deutsche Gesellschaft für Materialkunde e.V. -DGM-, Oberursel: Cellular Materials. Proceedings. CD-ROM: 7-9 November, 2012, Dresden; CELLMAT 2012. Dresden, 2012
Schmidt, C.; Altmann, F.; Breitenstein, O.:
Application of lock-in thermography for failure analysis in integrated circuits using quantitative phase shift analysis
In: Materials Science and Engineering, B. Solid state materials for advanced technology, Vol.177 (2012), No.15, pp.1261-1267
Schmidt, I.; Riedel, H.; Svoboda, J.:
Numerical simulation of organic binder decomposition and combined seepage- and diffusive transport of the gaseous reaction products through a porous green body during thermal debinding of ceramic parts
(International Association of Applied Mathematics and Mechanics (Annual Meeting) <83, 2012, Darmstadt>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.12 (2012), No.1, pp.397-398
Schoenfelder, S.; Kaule, F.; Oswald, M.; Bagdahn, J.; Petzold, M.:
Strength of thin silicon wafers with via holes
(International Workshop on Thin Semiconductor Devices <13, 2012, Munich>)
In: Fraunhofer-Einrichtung für Modulare Festkörper-Technologien -EMFT-, München: 13th International Workshop on Thin Semiconductor Devices. Proceedings: Held during the Forum "be-flexible" 2012, 21st November 2012, Munich, Germany. München: Fraunhofer EMFT, 2012
Schriever, C.; Wehrspohn, R.B.:
Photonics: Stretching silicon's potential
In: Nature Materials, Vol.11 (2012), No.2, pp.96-97
Schwaiger, R.; Weber, M.; Moser, B.; Gumbsch, P.; Kraft, O.:
Mechanical assessment of ultrafine-grained nickel by microcompression experiment and finite element simulation
In: Journal of Materials Research, Vol.27 (2012), No.1, pp.266-277
Schweizer, F.:
Leichtbauteile rissfest fertigen: Vermeidung von Kaltrissen in hochfesten Stählen
In: Konstruktion, Vol.64 (2012), No.10, pp.IW 10
Schweizer, F.:
Leichtbauteile sicher machen
In: KEM. Informationsvorsprung für Konstrukteure, (2012), No.10, pp.13
Shen, Z.J.; Yan, H.X.; Grüner, D.; Belova, L.M.; Sakamoto, Y.; Hu, J.F.; Nan, C.W.; Höche, T.; Reece, M.J.:
Ferroelectric ceramics with enhanced remnant polarization by ordered coalescence of nano-crystals
In: Journal of Materials Chemistry, Vol.22 (2012), No.44, pp.23547-23552
Siegele, D.; Fingerhuth, J.; Mrovec, M.; Schuler, X.; Utz, S.; Fischaleck, M.; Scholz, A.; Oechsner, M.; Vormwald, M.; Bauerbach, K.; Schlitzer, T.; Rudolph, J.; Willuweit, A.:
Thermal fatigue - Materials modeling
(Staatliche Materialprüfungsanstalt (MPA Seminar) <38, 2012, Stuttgart>)
In: Materialprüfungsanstalt Universität Stuttgart -MPA-, Stuttgart: Energieerzeugung und Energieeffizienz - Werkstoffe und Bauteilverhalten. Kurzfassung der Beiträge/Manuskripte auf CD: 38. MPA-Seminar 2012 am 1. und 2. Oktober 2012 in Stuttgart. Stuttgart: MPA, 2012. (MPA-Seminar), pp. 106-144
Siegele, D.; Baumgartner, J.; Varfolomeev, I.; Moroz, S.; Brand, M.; Bruder, T.:
Zum Einfluss von Eigenspannungen bei der Lebensdauerbewertung von Schweißverbindungen
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Betriebsfestigkeit (Tagung) <39, 2012, Paderborn>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Arbeitskreis Betriebsfestigkeit: Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit: 39. Tagung des DVM-Arbeitskreises Betriebsfestigkeit, 10. + 11. Oktober 2012, Paderborn. Berlin: DVM, 2012. (DVM-Bericht 139), pp. 323-338
Siegert, J.; Cassidy, C.; Schrank, F.; Gerbach, R.; Naumann, F.; Petzold, M.:
Quality control of bond strength in low-temperature bonded wafers
(International Symposium on Semiconductor Wafer Bonding - Science, Technology and Applications <12, 2012, Honolulu/Hawaii>)
In: Goorsky, M.: Semiconductor Wafer Bonding 12. Science, Technology, and Applications: Held during PRiME 2012, October 7 to 12, 2012, Honolulu, Hawaii. Pennington, NJ: ECS, 2012. (ECS transactions 50.2012, Nr.7), pp. 253-262
Sommer, S.; Burget, S.:
Charakterisierung und Modellierung von Punktschweißverbindungen in pressgehärteten Bauteilen für die Crashsimulation
(Kongress "Berechnung, Simulation und Erprobung im Fahrzeugbau" <16, 2012, Baden-Baden>)
In: VDI-Gesellschaft Fahrzeug- und Verkehrstechnik: 16. Kongress SIMVEC Berechnung, Simulation und Erprobung im Fahrzeugbau 2012: Baden-Baden, 20. und 21. November 2012. Düsseldorf: VDI-Verlag, 2012. (VDI-Berichte 2169), pp. 645-660
Sommer, S.; Burget, S.; Bier, M.:
Recent developments in joint modeling for crash simulations
(European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) <6, 2012, Vienna>)
In: European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012. Proceedings. CD-ROM: September 10-14, 2012, Vienna, Austria; Abstractband. Vienna: Vienna University of Technology, 2012
Sorochynska, L.; Grishchuk, S.; Korres, S.; Riehn, C.; Niedner-Schatteburg, G.; Georgieva, V.; Georgiev, G.; Karger-Kocsis, J.:
Energy transfer and photoactivity of photozymes included in polyacrylate hydrogels
In: Journal of applied polymer science, Vol.125 (2012), No.5, pp.3721-3729
Sprafke, A. N.; Wehrspohn, R. B.:
Light trapping concepts for photon management in solar cells
In: Green, Vol.2 (2012), No.4, pp.177-187
urn:nbn:de:0011-n-2364628
Steudel, F.; Dyrba, M.; Schweizer, S.:
Fluorescent borate glass enhances cadmium telluride solar cells
In: SPIE newsroom. Online journal, (2012), 2 pp.
Steudel, F.; Miclea, P.-T.; Teuscher, N.; Heilmann, A.; Schweizer, S.:
Optical characterization of TCO films on borate glasses for high efficiency solar cells
(Conference "Photonics for Solar Energy Systems" <4, 2012, Brussels>)
In: Wehrspohn, R.: Photonics for Solar Energy Systems IV: April 2012, Brussels, Belgium. Bellingham, WA: SPIE, 2012. (Proceedings of SPIE 8438), Paper 843819
Steudel, F.; Miclea, P.-T.; Teuscher, N.; Heilmann, A.; Schweizer, S.:
Optical simulation of transparent conductive oxide (TCO) films on borate glasses
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 467-470
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P.:
Interface orientation distribution during grain growth in bulk SrTiO3 measured by means of 3D X-ray diffraction contrast tomography
(Symposium PP, Three-Dimensional Tomography of Materials <2011, Boston>)
In: Three-dimensional tomography of materials: November 28 - December 3, 2011, Boston. New York: Cambridge Univ. Press, 2012. (Materials Research Society Symposium Proceedings 1421), pp. 58-62
Syha, M.; Rheinheimer, W.; Bäurer, M.; Lauridsen, E.M.; Ludwig, W.; Weygand, D.; Gumbsch, P.:
Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
In: Scripta materialia, Vol.66 (2012), No.1, pp.1-4
urn:nbn:de:0011-n-1900522
Tritschler, M.; Butz, A.:
Vorhersage der Rückfederung bei der Kaltumformung von Titanblechen
In: wt Werkstattstechnik online, Vol.2012 (2012), No.10, pp.716-717
Turek, M.; Möller, C.; Lauer, K.:
Investigation of excess charge carrier lifetime measurements on samples of arbitrary thickness
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <27, 2012, Frankfurt>)
In: Nowak, S.: 27th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2012. DVD-ROM: Proceedings of the international conference held in Frankfurt, Germany, 24 - 28 September 2012. München: WIP-Renewable Energies, 2012, pp. 1045-1048
Varfolomeev, I.; Burdack, M.; Moroz, S.; Siegele, D.; Kadau, K.:
Experimental and numerical study on mixed mode I/II fatigue crack growth in planar specimens
(International Conference on "Crack Paths" (CP) <4, 2012, Gaeta>)
In: Carpinteri, A.: The 4th International Conference on CRACK PATHS (CP 2012). Proceedings: Gaeta, Italy, 19-21 September, 2012. Gaeta, 2012, pp. 823-830
Vogel, K.; Wuensch, D.; Uhlig, S.; Froemel, J.; Naumann, F.; Wiemer, M.; Gessner, T.:
Influence of test speed on the bonding strength of glass frit bonded wafers
(Youth Symposium on Experimental Solid Mechanics (YSESM) <11, 2012, Brasov/Romania>)
In: Tuns, I.: 11th Youth Symposium on Experimental Solid Mechanics, YSESM 2012. Book of Abstracts: 30th of May 2012 - 2nd of June 2012, Brasov, Romania. Brasov, 2012, pp. 100-101
Wahl, R.; Schneider, J.; Gumbsch, P.:
In situ observation of cavitation in crossed microchannels
In: Tribology international, Vol.55 (2012), pp.81-86
Wahl, R.; Schneider, J.; Gumbsch, P.:
Influence of the real geometry of the protrusions in micro textured surfaces on frictional behaviour
In: Tribology letters, Vol.47 (2012), No.3, pp.447-453
Weber, M.:
Numerische Untersuchung der Mikrozerspanung zur Analyse der Ursachen des Skalierungsverhaltens der spezifischen Schnittkraft
Aachen: Shaker, 2012
(Berichte aus dem Maschinenbau)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2012
ISBN 978-3-8440-1407-5
Wehrspohn, R.B.; Krause, M.; Schriever, C.:
Measuring residual stress on the nanometer scale - Novel tools for fundamental and applied research
(Symposium SS "Properties and Processes at the Nanoscale - Nanomechanics of Materials Behavior" <2012, Boston/Mass.>)
In: Anderson, P.: Properties and processes at the nanoscale - nanomechanics of materials behavior: Symposium held November 28 - December 2, 2011, Boston, Massachussetts. New York: Cambridge Univ. Press, 2012. (Materials Research Society Symposium Proceedings 1424), pp. 103-108
Wehrspohn, R.B.:
Rationales Werkstoffdesign als Schlüssel zu mehr Energieeffizienz
In: Konstruktion, (2012), No.5, pp.IW 2
Weise, J.; Baumeister, J.; Hohe, J.; Böhme, W.; Beckmann, C.:
Epoxy aluminium hybrid foam - An innovative sandwich core material with improved energy absorption characteristics
(International Conference on Sandwich Structures (ICSS) <10, 2012, Nantes>)
In: Casari, P.: 10th International Conference on Sandwich Structures, ICSS-10. Book of abstracts: 27th - 29th August 2012, Nantes, France. Nantes: Université de Nantes, 2012, pp. 81-82
Weise, J.; Baumeister, J.; Böhme, W.; Hohe, J.:
Quasi-static and dynamic compression behaviour of epoxy-aluminium hybrid foams
(International Conference on Cellular Materials (CELLMAT) <2, 2012, Dresden>)
In: Deutsche Gesellschaft für Materialkunde e.V. -DGM-, Oberursel: Cellular Materials. Proceedings. CD-ROM: 7-9 November, 2012, Dresden; CELLMAT 2012. Dresden, 2012
Wessely, P.J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.:
Device characteristics of in-situ CCVD grown bilayer graphene FETs at elevated temperatures
(International Symposium on Graphene, Ge/III-V, Nanowires and Emerging Materials for Post-CMOS Applictions <4, 2012, Seattle/Wash.>)
In: Obeng, Y.: Graphene, Ge/III-V, nanowires, and emerging materials for post-CMOS applications 4: The Fourth International Symposium ... was held from May 6 - 10, 2012 ... in Seattle, WA, at the 221st meeting of the Electrochemical Society. Pennington, NJ: ECS, 2012. (ECS transactions 45.2012, Nr.4), pp. 23-30
Wessely, P.J.; Wessely, F.; Birinci, E.; Riedinger, B.; Schwalke, U.:
Hysteresis of in situ CCVD grown graphene transistors
In: Electrochemical and solid state letters, Vol.15 (2012), No.4, pp.K31-K34
Wessely, P.J.; Wessely, F.; Birinci, E.; Schwalke, U.; Riedinger, B.:
On/off-current ratios of transfer-free bilayer graphene FETs as a function of temperature
(International Conference on Design & Technology of Integrated Systems in Nanoscale Era (DTIS) <7, 2012, Tunis>)
In: Institute of Electrical and Electronics Engineers -IEEE-: DTIS 2012, 7th International Conference on Design & Technology of Integrated Systems in Nanoscale Era: May 16-18, 2012, Gammarth, Tunisia. Piscataway: IEEE, 2012, 3 pp.
Wessely, P.J.; Wessely, F.; Birinci, E.; Beckmann, K.; Riedinger, B.; Schwalke, U.:
Silicon-CMOS compatible in-situ CCVD grown graphene transistors with ultra-high on/off-current ratio
In: Physica. E, Vol.44 (2012), No.7-8, pp.1132-1135
urn:nbn:de:0011-n-2067291
Wessely, P.J.; Wessely, F.; Birinci, E.; Schwalke, U.; Riedinger, B.:
Transfer-free fabrication of graphene transistors
In: Journal of vacuum science and technology B. Microelectronics and nanometer structures, Vol.30 (2012), No.3, Art.03D114, 5 pp.
urn:nbn:de:0011-n-2116873
Wohlfahrt, H.; Nitschke-Pagel, T.; Dilger, K.; Siegele, D.; Brand, M.; Sakkiettibutra, J.; Loose, T.:
Residual stress calculations and measurements: Review and assessment of the IIW round robin results
In: Welding in the world, Vol.56 (2012), No.9-10, pp.120-140
urn:nbn:de:0011-n-2233508
Wüstenhagen, S.:
Ökokleid für Stromtankstellen
In: E-Mobility, (2012), No.2, pp.48-50
Yoon, B.; Landman, U.; Habibpour, V.; Harding, C.; Kunz, S.; Heiz, U.; Moseler, M.; Walter, M.:
Oxidation of magnesia-supported Pd30 nanoclusters and catalyzed CO combustion: Size-selected experiments and first-principles theory
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.116 (2012), No.17, pp.9594-9607
Ziegler,Tobias; Kraft, T.; Schäfer, Roland; Graf, C.; Visotschnik, R.; Haderk, K.; Richter, H.-J.:
Zahnersatz
2012