Fraunhofer IWM


Scientific Publications


Altmann, F.; Schmidt, C.; Brand, S.; Czurratis, P.; Petzold, M.:
Failure diagnostics for 3D system integration technologies in microelectronics
(Electrochemical Society (Meeting) <218, 2010, Las Vegas/Nev.>)
In: Electrochemical Society -ECS-: 218th ECS meeting abstracts 2010. Vol.3: Las Vegas, Nevada, USA, 10 - 15 October 2010. Red Hook, NY: Curran, 2011, pp. 1691
Amann, T.; Kailer, A.:
Analysis of the ultralow friction behavior of a mesogenic fluid in a reciprocating contact
In: Wear, Vol.271 (2011), No.9-10, pp.1701-1706
urn:nbn:de:0011-n-1895973
Amann, T.; Kailer, A.:
Relationship between ultralow friction of mesogenic-like fluids and their lateral chain length
In: Tribology letters, Vol.41 (2011), No.1, pp.121-129
Amann, T.; Kailer, A.:
Rheological and tribological investigation of a mesogenic fluid with ultralow friction
(Vienna International Conference on Nano-Technology (Viennano) <4, 2011, Wien>)
In: Franek, F. (Ed.): ECOTRIB 2011: 3. European conference on Tribology in tandem with Viennano '11; 4. Vienna International Conference on Nano-Technology. Vol. 1. Proceedings: Wien, Austria, June 7 - 9, 2011. Wien: ÖTG, 2011, pp. 83-88
Atrash, F.; Hashibon, A.; Gumbsch, P.; Sherman, D.:
Phonon emission induced dynamic fracture phenomena
In: Physical review letters, Vol.106 (2011), No.8, Art. 085502, 4 pp.
Atrens, A.; Winzer, N.; Dietzel, W.:
Stress corrosion cracking of magnesium alloys
In: Advanced engineering materials, Vol.13 (2011), No.1-2, pp.11-18
Bäcker, C.; Herrmann, M.; Hübert, C.; Koplin, C; Oberschmidt, D.; Uhlmann, E.; Renz, A.; Schulz, I.; Wacinski, M.:
Technologie zur Herstellung vollkeramischer Fräswerkzeuge: Abschlussbericht des InnoNet-Projekts "TechVolk". Förderkennzeichen BMWi 16IN0583-84 - 16IN0586
Berlin: Fraunhofer IPK, 2011
Bakowskie, R.; Petter, K.; Eiternick, S.; Lausch, D.; Müller, G.:
Efficient methods for detection of SiC and Si3N4 precipitates and filaments in multi-crystalline silicon wafers and solar cells
In: Physica status solidi. C, Vol.8 (2011), No.4, pp.1380-1383
Beckmann, C.; Hohe, J.:
Probabilistic homogenization of solid foams
(Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) <82, 2011, Graz>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.11 (2011), No.1, pp.527–528
Beckmann, C.; Hohe, J.:
Stochastische Analyse des effektiven Materialverhaltens von ungeordneten dreidimensionalen Schäumen
(Symposium Verbundwerkstoffe und Werkstoffverbunde <18, 2011, Chemnitz>)
In: Wielage, B.: Verbundwerkstoffe. 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011: 30. März bis 01. April 2011, Chemnitz. Chemnitz: Technische Universität Chemnitz, 2011. (Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen 41), pp. 537-542
Bierwisch, C.; Kübler, R.; Kleer, G.; Moseler, M.:
Modelling of contact regimes in wire sawing with dissipative particle dynamics
In: Philosophical Transactions of the Royal Society of London. Series A, Vol.369 (2011), No.1945, pp.2422-2430
urn:nbn:de:0011-n-1811939
Böhme, W.; Memhard, D.; Brand, M.; Siegele, D.:
Versagensverhalten crashrelevanter Aluminium-Schweißverbindungen
In: Schweißen und Schneiden, Vol.63 (2011), No.12, pp.716-722
Borchers, Kirsten; Bierwisch, Claas; Engelhardt, Sascha; Graf, Careen; Hirth, Thomas; Hoch, Eva; Jaeger, Raimund; Kluger, Petra; Krüger, Hartmut; Meyer, Wolfdietrich; Novosel, Esther; Refle, Oliver; Schuh, Christian; Seiler, Nadine; Tovar, Günter E.M.; Wegener, Michael; Ziegler, Tobias:
Material- und Prozessentwicklung für die Herstellung kleinlumiger, verzweigter Gefäßsysteme mittels Inkjetdruck und Zweiphotonenpolymerisation
(Thüringer Grenz- und Oberflächentage (ThGOT) <7, 2011, Zeulenroda>)
In: Grünler, B.: 7. Thüringer Grenz- und Oberflächentage mit 1. Zukunftsarena Oberflächentechnik und 8. Thüringer Biomaterial-Kolloquium 2011. Tagungsband: Zeulenroda-Triebes, 13./15. September 2011; Plenarvorträge, Kurzvorträge, Posterzusammenfassungen. Jena: Innovent, 2011, pp. 309-310
urn:nbn:de:0011-n-1863573
Brand, S.; Czurratis, P.; Hoffrogge, P.; Temple, D.; Malta, D.; Reed, J.; Petzold, M.:
Extending acoustic microscopy for comprehensive failure analysis applications
In: Journal of materials science. Materials in electronics, Vol.22 (2011), No.10, pp.1580-1593
Breinlinger, T.; Wonisch, A.; Kraft, T.:
Simulation of particulate flows using coupled SPH and DEM simulations
(International SPHERIC Workshop <6, 2011, Hamburg>)
In: Rung, T. (Ed.): 6th International SPHERIC Workshop: 8 - 10 June 2011. Hamburg: Technische Universität Hamburg-Harburg, 2011. (Schriftenreihe Schiffbau 658), pp. 66-71
Chen, Z.M.; Mrovec, M.; Gumbsch, P.:
Dislocation-vacancy interactions in tungsten
In: Modelling and simulation in materials science and engineering, Vol.19 (2011), No.7, Art. 074002, 14pp.
urn:nbn:de:0011-n-1891288
Costelle, L.; Järvi, T.T.; Räisänen, M.T.; Tuboltsev, V.; Räisänen, J.:
Binding of deposited gold clusters to thiol self-assembled monolayers on Au(111) surfaces
In: Applied Physics Letters, Vol.98 (2011), No.4, Art. 043107, 3 pp.
Cross, C.E.; Xu, P.; Winzer, N.; Bender, S.; Eliezer, D.:
Corrosion and corrosion-fatigue of AZ31 magnesium weldments
In: Welding in the world, Vol.55 (2011), No.7-8, pp.40-47
Dammann, M.; Baeumler, M.; Gütle, F.; Cäsar, M.; Walcher, H.; Waltereit, P.; Bronner, W.; Müller, S.; Kiefer, R.; Quay, R.; Mikulla, M.; Ambacher, O.; Graff, A.; Altmann, F.; Simon, M.:
Reliability and degradation mechanism of 0.25 µm AlGaN/GaN HEMTs under RF stress conditions
(International Integrated Reliability Workshop (IRW) <30, 2011, South Lake Tahoe/Calif.>)
In: Institute of Electrical and Electronics Engineers -IEEE-: IEEE International Integrated Reliability Workshop, IRW 2011: Final report, S. Lake Tahoe, California, USA, 16 - 20 October 2011. Piscataway/NJ: IEEE, 2011, pp. 42-46
Dembski, S.; Milde, M.; Dassonneville, E.; Gellermann, C.; Klockenbring, T.; Dyrba, M.; Schweizer, S.:
Biocompatible luminescent nanoparticles on the basis of calcium phosphate
(Symposium JJ "Biological Hybrid Materials for Life Sciences" <2011, San Francisco/Calif.>)
In: Stanciu, L.: Symposium JJ "Biological Hybrid Materials for Life Sciences" 2011: April 26 - 29, 2011, San Francisco, California, USA, MRS Spring Meeting. Warrendale, Pa.: MRS, 2011. (Materials Research Society Symposium Proceedings 1355)
Dembski, S.; Milde, M.; Dyrba, M.; Schweizer, S.; Gellermann, C.; Klockenbring, T.:
Effect of pH on the synthesis and properties of luminescent SiO(2)/calcium phosphate:Eu(3+) core-shell nanoparticles
In: Langmuir. The ACS journal of surfaces and colloids, Vol.27 (2011), No.23, pp.14025-14032
Dembski, S.; Rupp, S.; Milde, M.; Gellermann, C.; Dyrba, M.; Schweizer, S.; Batentschuk, M.; Osvet, A.; Winnacker, A.:
Synthesis and optical properties of luminescent core-shell structured silicate and phosphate nanoparticles
(Symposium K "Rare Earth Doped Materials for Optical Based Technologies" <2010, Strasbourg>)
In: Bettinelli, M.: Rare Earth Doped Materials for Optical Based Technologies Symposium K of the 2010 EMRS spring meeting EMRS 2010: Strasbourg, France, June 7 - 11, 2010. Amsterdam: Elsevier, 2011. (Optical materials 33.2011, Nr.7), pp. 1106-1110
urn:nbn:de:0011-n-1719479
Dresbach, C.; Lorenz, G.; Petzold, M.; Altenbach, H.:
Analysis of chip damage risk in thermosonic wire bonding
(International Conference on Advanced Computational Engineering and Experimenting (ACE-X) <4, 2010, Paris>)
In: Öchsner, A.: Advanced computational engineering and experimenting: Selected, peer reviewed papers from the Fourth International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2010) held at the Hotel Concorde La Fayette Paris, France during the period 8th-9th July, 2010. Stafa-Zurich: Trans Tech Publications, 2011. (Key engineering materials 478), pp. 75-80
Eichlseder, M.; Rendtel, A.; Brexeler, I.; Peters, G.; Schwarz, H.; Kübler, M.; Deckert, M.; Burr, A.; Burmeister, F.; Fromm, A.; Hagen, J.; Burmeister, F.; Fromm, A.; Hagen, J.:
Spritzgießprozesse zur kostengünstigen Erzeugung funktionaler Komponenten hoher Formtreue durch neue Werkzeugbeheizungen "SkForm": Abschlussbericht, Laufzeit 01.04.2007 - 30.09.2010
Stuttgart: Fraunhofer Verlag, 2011
ISBN 3-8396-0247-5
ISBN 978-3-8396-0247-8
Elsayed, M.; Krause-Rehberg, R.; Moutanabbir, O.; Anwand, W.; Richter, S.; Hagendorf, C.:
Cu diffusion-induced vacancy-like defects in freestanding GaN
In: New journal of physics. Online journal, Vol.13 (2011), January, Art. 013029, 13 pp.
Erunal, E.; Jakes, P.; Korbel, S.; Acker, J.; Kungl, H.; Elsasser, C.; Hoffmann, M.J.; Eichel, R.A.:
CuO-doped NaNbO(3) antiferroelectrics: Impact of aliovalent doping and nonstoichiometry on the defect structure and formation of secondary phases
In: Physical Review. B, Vol.84 (2011), No.18, Art.184113, 11 pp.
Fiedler, J.; Busch, M.; Scheler, T.:
Einfluss der Rezeptur auf die Eigenschaften von Celluloseregeneratfasern verstärktem Polypropylen
(Fachtagung über Verarbeitung und Anwendung von Polymeren (TECHNOMER) <22, 2011, Chemnitz>)
In: Gehde, M.: TECHNOMER 2011. CD-ROM: 22. Fachtagung über Verarbeitung und Anwendung von Polymeren. Chemnitz, 10. bis 12. November 2011. Chemnitz: IFK, 2011, pp. 35
Fiedler, J.; Jahn, I.; Theumer, T.; Krombholz, A.:
Untersuchungen zum Außeneinsatz von WPC-Spritzgussbauteilen
(Symposium Verbundwerkstoffe und Werkstoffverbunde <18, 2011, Chemnitz>)
In: Wielage, B.: Verbundwerkstoffe. 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011: 30. März bis 01. April 2011, Chemnitz. Chemnitz: Technische Universität Chemnitz, 2011. (Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen 41), pp. 555-564
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2011/1
Freiburg/Brsg.: Fraunhofer IWM, 2011
urn:nbn:de:0011-n-1555880
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2011/2
In: Fraunhofer IWM Report, (2011), 4 pp.
Freiburg/Brsg.: Fraunhofer IWM
urn:nbn:de:0011-n-2012084
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2010
Freiburg/Brsg.: Fraunhofer IWM, 2011
urn:nbn:de:0011-n-1589460
Friedmann, V.:
Versagensverhalten von Austenit-Martensit-Rohrmischverbindungen für 600°C-Dampfkraftwerke unter Kriechermüdungsbelastung
Aachen: Shaker, 2011
(Schriftenreihe Werkstoffwissenschaft und Werkstofftechnik 74)
Zugl.: Karlsruhe, Inst. für Technologie (KIT), Diss., 2011
ISBN 978-3-8440-0539-4
Friedrich, T.:
Zuverlässigkeitsaspekte von polykristlinem Silizium und deren Einfluss auf die Funktion von Inertialsensoren
Halle/Saale: Fraunhofer IWM, 2011
(IWM-Bericht 2011, Nr.5)
Zugl.: Halle, Univ., Diss., 2011
Fritz, M.; Weps, M.:
Kunststoffe - Hartschäume auf Basis von nachwachsenden Rohstoffen
In: Werkstoffe in der Fertigung, (2011), No.5, pp.44-45
Gesemann, B.; Wehrspohn, R.; Hackner, A.; Müller, G.:
Large-scale fabrication of ordered silicon nanotip arrays used for gas ionization in ion mobility spectrometers
In: IEEE Transactions on Nanotechnology, Vol.10 (2011), No.1, pp.50-52
Gosvami, N.N.; Feldmann, M.; Peguiron, J.; Moseler, M.; Schirmeisen, A.; Bennewitz, R.:
Ageing of a microscopic sliding gold contact at low temperatures
In: Physical review letters, Vol.107 (2011), No.14, Art. 144303, 5 pp.
Gu, D.; Baumgart, H.; Naumann, F.; Petzold, M.:
Finite element modeling and raman study of strain distribution in patterned device islands on strained silicon-on-insulator (sSOI) substrates
(Electrochemical Society (Meeting) <218, 2010, Las Vegas/Nev.>)
In: Electrochemical Society -ECS-: 218th ECS meeting abstracts 2010. Vol.3: Las Vegas, Nevada, USA, 10 - 15 October 2010. Red Hook, NY: Curran, 2011, pp. 1702
Gumbsch, P.; Sandfeld, S.; Senger, J.; Weygand, D.; Hochrainer, T.:
Continuum modeling of dislocation plasticity: Theory, numerical implementation and comparison to discrete dislocation simulations
(International Conference on Heterogeneous Materials Mechanics (ICHMM) <3, 2011, Shanghai>)
In: 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011. Conference Program. Lancaster, Pa.: DEStech Publications, 2011, pp. 7-15
Hagen, J.; Burmeister, F.; Rendtel, A.; Kübler, M.; Burr, A.:
A novel composite ceramic material as heating elements in injection molding processes
In: Ceramic forum international : CFI. Berichte der Deutschen Keramischen Gesellschaft, Vol.88 (2011), No.4, pp.E23-E26
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.:
An enhanced local approach model for the assessment of brittle fracture based on micromechanical investigations
(International Conference "Materials Structure and Micromechanics of Fracture" (MSMF) <6, 2010, Brno>)
In: Sandera, P.: Materials structure & micromechanics of fracture: Selected, peer reviewed papers from the 6th International Conference "Materials Structure & Micromechanics of Fracture (MSMF-6)", Brno, Czech Republic, June 28 - 30, 2010. Stafa-Zurich: Trans Tech Publications, 2011. (Key engineering materials 465), pp. 539-542
urn:nbn:de:0011-n-1725443
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.:
Verbesserung lokaler Spaltbruchmodelle unter Berücksichtigung mikromechanischer Vorgänge
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <43, 2011, Rostock>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen; 43. Tagung des DVM-Arbeitskreises Bruchvorgänge, 22. + 23. Februar 2011, Rostock. Berlin: DVM, 2011. (DVM-Bericht 243), pp. 133-142
Hashibon, A.; Elsässer, C.:
First-principles density functional theory study of native point defects in Bi2Te3
In: Physical Review. B, Vol.84 (2011), No.14, Art. 144117
Heierli, J.; Birkeland, K.W.; Simenhois, R.; Gumbsch, P.:
Anticrack model for skier triggering of slab avalanches
In: Cold regions science and technology, Vol.65 (2011), No.3, pp.372-381
urn:nbn:de:0011-n-1725455
Helm, D.; Butz, A.; Raabe, D.; Gumbsch, P.:
Microstructure-based description of the deformation of metals: Theory and application
In: JOM. The journal of the Minerals, Metals & Materials Society, Vol.63 (2011), No.4, pp.26-33
urn:nbn:de:0011-n-1725434
Helm, D.; Butz, A.; Raabe, D.; Gumbsch, P.:
Microstructure-based description of the deformation of metals: theory and application
(World Congress on Integrated Computational Materials Engineering <1, 2011, Seven Springs, Pa.>)
In: Allison, J. (Ed.): 1st World Congress on Integrated Computational Materials Engineering (ICME). Proceedings: Held July 10 - 14, 2011 at Seven Springs Mountain Resort, Seven Springs, PA. Hoboken, NJ: Wiley InterScience, 2011, pp. 89-98
Höche, T.; Graff, A.; Altmann, F.; Petzold, M.:
Characterization of wafer-bonded joins using high-resolution transmission electron microscopy
(MicroCar Conference <4, 2011, Leipzig>)
In: Michel, B.: MicroCar 2011. Micro materials, nano materials for automotives. Proceedings: 4th MicroCar Conference - MicroCar 2011, March 1st, in Leipzig. Berlin: Fraunhofer IZM, 2011. (Micromaterials and Nanomaterials 13.2011), pp. 154-157
Höche, T.; Lorenz, M.; Müller, A.; Grundmann, M.; Mittwoch, K.:
Laser patterning of thin films for luminescence applications
(European Microelectronics and Packaging Conference (EMPC) <18, 2011, Brighton>)
In: International Microelectronics and Packaging Society -IMAPS-: 18th European Microelectronics and Packaging Conference, EMPC 2011. Proceedings. CD-ROM: Brighton, 12th-15th September 2011. Andover, Hampshire: IMAPS UK, 2011, Art. 6142421
Hohe, J.; Luckow, S.; Hardenacke, V.; Sguaizer, Y.; Siegele, D.:
Enhanced fracture assessment under biaxial external loads using small scale cruciform bending specimens
In: Engineering fracture mechanics, Vol.78 (2011), No.9, pp.1876-1894
urn:nbn:de:0011-n-1725335
Hohe, J.; Beckmann, B.; Reinfried, M.; Luthardt, F.:
Numerische Bestimmung der makroskopischen Eigenschaften hybrider Schäume
(Symposium Verbundwerkstoffe und Werkstoffverbunde <18, 2011, Chemnitz>)
In: Wielage, B.: Verbundwerkstoffe. 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011: 30. März bis 01. April 2011, Chemnitz. Chemnitz: Technische Universität Chemnitz, 2011. (Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen 41), pp. 543-548
Hormann, Christoph; Gumbsch, P.:
Das Wachstum amorpher Kohlenstoffschichten auf Basis von Toluol
Karlsruhe, Inst. für Technologie (KIT), Diss., 2011
Horn, G.P.; Gerbach, R.; Lin, T.-W.; Bernach, M.; Brand, S.; Johnson, H.T.:
Development of nonuniform residual stresses during anodic bonding
(Electrochemical Society (Meeting) <218, 2010, Las Vegas/Nev.>)
In: Electrochemical Society -ECS-: 218th ECS meeting abstracts 2010. Vol.3: Las Vegas, Nevada, USA, 10 - 15 October 2010. Red Hook, NY: Curran, 2011, pp. 1755
Jaeger, R.; Bierwisch, C.; Ziegler, T.; Courseau, J.; Ebel, D.:
Additive manufacturing of an artificial blood vessel system: Optimum layout and fluid-mechanical characterization
In: Regenerative medicine, Vol.6 (2011), No.6, Supplement 2, pp.87
Järvi, T.T.; Duin, A.C.T. van; Nordlund, K.; Goddard, W.A.:
Development of interatomic ReaxFF potentials for Au-S-C-H systems
In: Journal of physical chemistry. A, Vol.115 (2011), No.37, pp.10315-10322
Jin, Z.H.; Dunham, S.T.; Gleiter, H.; Hahn, H.; Gumbsch, P.:
A universal scaling of planar fault energy barriers in face-centered cubic metals
In: Scripta materialia, Vol.64 (2011), No.7, pp.605-608
urn:nbn:de:0011-n-1725423
Kadkhodapour, J.; Butz, A.; Rad, S.Z.:
Mechanisms of void formation during tensile testing in a commercial, dual-phase steel
In: Acta Materialia, Vol.59 (2011), No.7, pp.2575-2588
urn:nbn:de:0011-n-1633917
Kadkhodapour, J.; Butz, A.; Ziaei-Rad, S.; Schmauder, S.:
A micro mechanical study on failure initiation of dual phase steels under tension using single crystal plasticity model
In: International Journal of Plasticity, Vol.27 (2011), No.7, pp.1103-1125
urn:nbn:de:0011-n-1725281
Kailer, A.; Amann, T.; Krummhauer, O.; Herrmann, M.; Sydow, U.; Schneider, M.:
Influence of electric potentials on the tribological behaviour of silicon carbide
(International Conference on Wear of Materials (WOM) <18, 2011, Philadelphia/Pa.>)
In: Ludema, K.C.: 18th International Conference on Wear of Materials, WOM 2011: Philadelphia, USA 4 - 7 April 2011. Amsterdam: Elsevier, 2011. (Wear 271.2011, Nr.9/10), 1922-1927
urn:nbn:de:0011-n-1830988
Kauffmann, Y.; Oh, S.H.; Koch, C.T.; Hashibon, A.; Scheu, C.; Rühle, M.; Kaplan, W.D.:
Quantitative analysis of layering and in-plane structural ordering at an alumina-aluminum solid-liquid interface
In: Acta Materialia, Vol.59 (2011), No.11, pp.4378-4386
Kauzlaric, D.; Pastewka, L; Meyer, H.; Heldele, R.; Schulz, M.; Weber, O.; Piotter, V.; Hausselt, J.; Greiner, A.; Korvink, J.G.:
Smoothed particle hydrodynamics simulation of shear-induced powder migration in injection moulding
In: Philosophical Transactions of the Royal Society of London. Series A, Vol.369 (2011), No.1944, pp.2320-2328
Khader, I.; Kürten, D.; Kailer, A.; Gumbsch, P.:
Drahtwalzen mit Werkzeugen aus Siliziumnitrid
(Abschlusskolloquium Sonderforschungsbereich 483 <2011, Karlsruhe>)
In: Albers, A. (Ed.): Hochbeanspruchte Gleit- und Friktionssysteme auf Basis ingenieurkeramischer Werkstoffe: Abschlusskolloquium am 25. Oktober 2011, Karlsruhe. Karlsruhe: KIT Scientific Publishing, 2011. (KIT Scientific Reports 7602), pp. 5-16
Khader, I.; Hashibon, A.; Albina, J.-M.; Kailer, A.:
Wear and corrosion of silicon nitride rolling tools in copper rolling
In: Wear, Vol.271 (2011), No.9-10, pp.2531-2541
Kit, O.O.; Pastewka, L.; Koskinen, P.:
Revised periodic boundary conditions: Fundamentals, electrostatics, and the tight-binding approximation
In: Physical Review. B, Vol.84 (2011), No.15, Art. 155431
Klengel, R.; Petzold, M.; Schade, D.; Sykes, B.:
Improved testing of soldered Busbar interconnects on silicon solar cells
(European Microelectronics and Packaging Conference (EMPC) <18, 2011, Brighton>)
In: International Microelectronics and Packaging Society -IMAPS-: 18th European Microelectronics and Packaging Conference, EMPC 2011. Proceedings. CD-ROM: Brighton, 12th-15th September 2011. Andover, Hampshire: IMAPS UK, 2011, Art. 6142434
Kluger, Petra; Borchers, Kirsten; Refle, Oliver; Engelhard, Sascha; Meyer, Wolfdietrich; Novosel, Esther; Graf, Careen; Bierwisch, Claas; Schuh, Christian; Seiler, Nadine; Wegener, Michael; Krüger, Hartmut; Jaeger, Raimund; Hirth, Thomas; Gillner, Arnold; Tovar, Günter E.M.:
Generation of small diameter, branched vascular systems by a combination of inkjet printing and multiphoton polymerization
(Deutsche Gesellschaft für Biomedizinische Technik (Jahrestagung) <45, 2011, Freiburg>)
In: Biomedizinische Technik, Vol.56 (2011), Supplement 1, 1 pp.
Köpge, Ringo; Schönfelder, Stephan; Giesen, Tim; Fischmann, Christian; Verl, Alexander; Bagdahn, Jörg:
The influence of transport operations on the wafer strength and breakage rate
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <26, 2011, Hamburg>)
In: European Commission: 26th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC. Proceedings: 5th to 9th September 2011 at the CCH - Congress Centre and International Fair Hamburg in Germany. München: WIP-Renewable Energies, 2011, pp. 2072-2077
Körbel, S.; Elsässer, C.:
Ab initio and atomistic study of ferroelectricity in copper-doped potassium niobate
In: Physical Review. B, Vol.84 (2011), No.1, Art. 014109, 8 pp.
Körner, W.; Elsässer, C.:
Density functional theory study for polycrystalline ZnO doped with Si or Nb
In: Physical Review. B, Vol.83 (2011), No.20, Art. 205306, 6 pp.
Körner, W.; Elsässer, C.:
Density functional theory study of dopants in polycrystalline TiO2
In: Physical Review. B, Vol.83 (2011), No.20, Art. 205315, 11 pp.
Körner, W.; Bristowe, P.D.; Elsässer, C.:
Density functional theory study of stoichiometric and nonstoichiometric ZnO grain boundaries
In: Physical Review. B, Vol.84 (2011), No.4, Art. 045305
Korres, S.; Sorochynska, L.; Grishchuk, S.; Karger-Kocsis, J.:
Swelling, compression and tribological behaviors of bentonite-modified polyacrylate-type hydrogels
In: Journal of applied polymer science, Vol.119 (2011), No.2, pp.1122-1134
Kröbel, S.; Elsässer, C.:
Cu substitutionals and defect complexes in the lead-free ferroelectric knn
(Workshop on High Performance Computing in Science and Engineering <2010, Stuttgart>)
In: Nagel, W.E. (Ed.): High Performance Computing in Science and Engineering '10: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2010. Berlin: Springer, 2011, pp. 181-188
Kübler, R.; Rist, T.; Hoetger, B.:
PROCESS AND APPARATUS FOR SEPARATING INDIVIDUAL PANES FROM A LAMINATED GLASS SHEET
2011
Lagger, H.G.; Peguiron, J.; Bierwisch, C.; Moseler, M.:
Magnetization models for particle-based simulations of magnetorheological fluids
(International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS) <4, 2011, Kos Island/Greece>)
In: Papadrakakis, M. et al.: COUPLED PROBLEMS 2011. Computational Methods for Coupled Problems in Science and Engineering IV: June 20 - 22, 2011, Island of Kos, Greece, pp. 1071-1082
Lausch, D.; Werner, M.; Naumann, V.; Schneider, J.; Hagendorf, C.:
Investigation of modified p-n junctions in crystalline silicon on glass solar cells
In: Journal of applied physics, Vol.109 (2011), No.8, Art. 084513, 5 pp.
Luke, M.; Varfolomeev, I.; Lutkepohl, K.; Esderts, A.:
Fatigue crack growth in railway axles: Assessment concept and validation tests
(TC24 Meeting <2008, Milano>)
In: Beretta, S.: Damage tolerance of railway axles: Result of a TC24 meeting held at Politecnico di Milano, Dipartimento di Meccanica, on 13 - 14th October 2008. Amsterdam: Elsevier, 2011. (Engineering fracture mechanics 78.2011, Nr.5), pp. 714-730
Maas, P.; Helm, D.; Jäckel, I.; Klöwer, J.:
Phänomenologische Modellierung des Warmfließverhaltens einer Nickel-Basis-Legierung
(Verformungskundliches Kolloquium <30, 2011, Leoben>)
In: Buchmayr, B. (Ed.): XXX. Verformungskundliches Kolloquium. Tagungsband: Leoben, 14.2.2011; [26.2. bis 1.3.2011, Planneralm, Steiermark]. Leoben, 2011, pp. 23-30
Madia, M.; Beretta, S.; Schödel, M.; Zerbst, U.; Luke, M.; Varfolomeev, I.:
Stress intensity factor solutions for cracks in railway axles
(TC24 Meeting <2008, Milano>)
In: Beretta, S.: Damage tolerance of railway axles: Result of a TC24 meeting held at Politecnico di Milano, Dipartimento di Meccanica, on 13 - 14th October 2008. Amsterdam: Elsevier, 2011. (Engineering fracture mechanics 78.2011, Nr.5), pp. 764-792
Maier, G.; Riedel, H.; Seifert, T.; Klöwer, J.; Mohrmann, R.:
Time and temperature dependent cyclic plasticity and fatigue crack growth of the nickel-base Alloy617B: Experiments and models
(European Symposium on Superalloys and their Applications (Euro Superalloys) <1, 2010, Wildbad Kreuth>)
In: Heilmaier, M.: Euro Superalloys 2010. Selected, peer reviewed papers from the First European Symposium on Superalloys and their Applications: 25 - 28 May, 2010, Wildbach Kreuth (Germany). Dürnten: Trans Tech Publications, 2011. (Advanced materials research 278), pp. 369-374
Manns, P.; Hüttentechnische Vereinigung der Deutschen Glasindustrie -HVG-:
Untersuchungen zur quantitativen Bewertung des Klebeverhaltens von Formwerkstoffen und Formenbeschichtungen bei der Heißformgebung von Glasschmelzen: Schlussbericht, Förderkennzeichen AiF 15515 N
Freiburg/Brsg.: Fraunhofer IWM, 2011
Margine, E.R.; Kolmogorov, A.N.; Reese, M.; Mrovec, M.; Elsässer, C.; Meyer, B.; Drautz, R.; Pettifor, D.G.:
Development of orthogonal tight-binding models for Ti-C and Ti-N systems
In: Physical Review. B, Vol.84 (2011), No.15, Art. 155120
Marton, P.; Elsässer, C.:
First-principles study of structural and elastic properties of the tetragonal ferroelectric perovskite Pb(Zr0.50Ti0.50)O3
In: Physica status solidi. B, Vol.248 (2011), No.10, pp.2222-2228
Marton, P.; Shimada, T.; Kitamura, T.; Elsässer, C.:
First-principles study of the interplay between grain boundaries and domain walls in ferroelectric PbTiO3
In: Physical Review. B, Vol.83 (2011), No.6, Art. 064110
Marton, P.; Elsässer, C.:
Switching of a substitutional-iron/oxygen-vacancy defect complex in ferroelectric PbTiO3 from first principles
In: Physical Review. B, Vol.83 (2011), No.2, Art. 020106, 4 pp.
Mayrhofer, L.; Bercioux, D.:
Pseudospin-dependent scattering in carbon nanotubes
In: Physical Review. B, Vol.84 (2011), No.11, Art. 115126
Memhard, D.; Andrieux, F.; Sun, D.-Z.; Häcker, R.:
Development and verification of a material model for prediction of containment safety of exhaust turbochargers
(European LS-DYNA Users Conference <8, 2011, Strasbourg>)
In: 8th European Users Conference 2011: May 23rd - 24th, 2011, Strasbourg, France. Solihull, UK: Arup, 2011, 11 pp.
Metzger, M.; Warkentin, M.; Seifert, T.:
Materialmodell zur Lebensdauervorhersage von Bauteilen aus Eisengusswerkstoffen
In: Motortechnische Zeitschrift : MTZ, (2011), No.10, pp.798-804
Meyer, S.; Richter, S.; Balski, M.; Hagendorf, C.:
Trace element analysis in solar silicon
In: Photovoltaics International, Vol.2011 (2011), No.14, pp.34-39
Moras, G.; Pastewka, L.; Gumbsch, P.; Moseler, M.:
Formation and oxidation of linear carbon chains and their role in the wear of carbon materials
In: Tribology letters, Vol.44 (2011), No.3, pp.355-365
urn:nbn:de:0011-n-1892221
Moras, G.; Pastewka, L.; Walter, M.; Schnagl, J.; Gurnbsch, P.; Moseler, M.:
Progressive shortening of sp-hybridized carbon chains through oxygen-induced cleavage
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.115 (2011), No.50, pp.24653-24661
Moseler, M.; Cervantes-Sodi, F.; Klemenz, A.; Hofmann, S.; Csanyi, G.; Ferrari, A.C.:
Reply to "comment on 'dynamic catalyst restructuring during carbon nanotube growth'"
In: ACS nano, Vol.5 (2011), No.2, pp.686-687
Moutanabbir, O.; Reiche, M.; Hähnel, A.; Erfurth, W.; Motohashi, M.; Tarun, A.; Hayazawa, N.; Kawata, S.; Naumann, F.; Patzold, M.; Holt, M.; Maser, J.:
Strain stability in nanoscale patterned strained silicon-on-insulator
(Electrochemical Society (Meeting) <218, 2010, Las Vegas/Nev.>)
In: Electrochemical Society -ECS-: 218th ECS meeting abstracts 2010. Vol.3: Las Vegas, Nevada, USA, 10 - 15 October 2010. Red Hook, NY: Curran, 2011, pp. 1907
Mrovec, M.; Nguyen-Manh, D.; Elsässer, C.; Gumbsch, P.:
Magnetic bond-order potential for iron
In: Physical review letters, Vol.106 (2011), No.24, Art. 246402
Müller, A.; Lorenz, M.; Brachwitz, K.; Lenzner, J.; Mittwoch, K.; Skorupa, W.; Grundmann, M.; Höche, T.:
Fresnoite thin films grown by pulsed laser deposition: Photoluminescence and laser crystallization
In: CrystEngComm, Vol.13 (2011), No.21, pp.6377-6385
urn:nbn:de:0011-n-1888955
Neuber, M.; Heilmann, A.:
Laser welding of polymer foils with gold nanoparticles as optical absorber
In: Advanced Science Letters : ASL, Vol.4 (2011), No.11-12, pp.3596-3598
Pablos-Martin, A. de; Hemono, N.; Mather, G.C.; Bhattacharyya, S.; Höche, T.; Bornhöft, H.; Deubener, J.; Munoz, F.; Duran, A.; Pascual, M.J.:
Crystallization kinetics of LaF3 nanocrystals in an oxyfluoride glass
In: Journal of the American Ceramic Society, Vol.94 (2011), No.8, pp.2420-2428
Pander, M.; Dietrich, S.; Schulze, S.-H.; Eitner, U.; Ebert, M.:
Thermo-mechanical assessment of solar cell displacement with respect to the viscoelastic behaviour of the encapsulant
(International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) <12, 2011, Linz>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 12th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011: Linz, Austria, 18 - 20 April 2011. New York, NY: IEEE, 2011, Art. 5765831; 6 pp.
Pastewka, L.; Moser, S.; Gumbsch, P.; Moseler, M.:
Anisotropic mechanical amorphization drives wear in diamond
In: Nature Materials, Vol.10 (2011), No.1, pp.34-38
Pastewka, L.; Järvi, T.T.; Mayrhofer, L.; Moseler, M.:
Charge-transfer model for carbonaceous electrodes in polar environments
In: Physical Review. B, Vol.83 (2011), No.16, Art. 165418, 6 pp.
Pergande, D.; Geppert, T.; Rhein, A. von; Schweizer, S.; Wehrspohn, R.; Moretton, S.; Lambrecht, A.:
Miniature infrared gas sensors using photonic crystals
In: Journal of applied physics, Vol.109 (2011), No.8, Art. 083117, 7 pp.
urn:nbn:de:0011-n-1610454
Pergande, D.; Wehrspohn, R.B.:
Polarization-dependent transmission properties of IOSOI W1 photonic crystal waveguides
In: Photonics and nanostructures, Vol.9 (2011), No.3, pp.213-218
Pfau, C.; Bohley, C.; Miclea, P.-T.; Schweizer, S.:
Structural phase transitions of barium halide nanocrystals in fluorozirconate glasses studied by Raman spectroscopy
In: Journal of applied physics, Vol.109 (2011), No.8, Art. 083545
Pfeiffer, W.; Koplin, C.; Reisacher, E.; Wenzel, J.:
Residual stresses and strength of hard chromium coatings
(European Conference on Residual Stresses (ECRS) <8, 2010, Riva del Garda>)
In: Scardi, P.: Residual Stresses VIII. Selected, peer reviewed papers from the 8th European Conference on Residual Stresses, ECRS 2010: June 26-28, 2010, Riva del Garda, Italy. Stafa-Zurich: Trans Tech Publications, 2011. (Materials Science Forum 681), pp. 133-138
urn:nbn:de:0011-n-1725359
Polfer, P.; Wonisch, A.; Bierwisch, C.; Kraft, T.:
Simulation of complex fluids with SimPARTIK
(Seminar "The Integration of CFD into the Product Development Process" <2011, Wiesbaden>)
In: International Association for the Engineering Analysis Community -NAFEMS-: The Integration of CFD into the Product Development Process: NAFEMS Seminar, 4. - 5. April 2011, Wiesbaden. Glasgow: NAFEMS, 2011, pp. 20
Polfer, P.; Wonisch, A.; Kraft, T.:
Smoothed particle hydrodynamics simulation of non-spherical particle suspensions
(International Conference on Particle-Based Methods, PARTICLES <2, 2011, Barcelona>)
In: International Center for Numerical Methods in Engineering -CIMNE-: Particle-Based Methods II - Fundamentals and Applications, pp. 882-890
Presser, V.; Krummhauer, O.; Kailer, A.; Nickel, K.G.:
In situ monitoring and depth-resolved characterization of wet wear of silicon carbide
In: Wear, Vol.271 (2011), No.9-10, pp.2665-2672
Richter, S.; Kaufmann, K.; Hagendorf, C.:
Chemical characterization of SiC and Si3N4 precipitates in multicrystalline silicon by NIR microscopy and ToF-SIMS
(European Materials Research Society (Spring Meeting) <2010, Strasbourg>)
In: Physica status solidi. C, Vol.8 (2011), No.3, pp.796-799
Rinker, M.:
Bruchmechanische Bewertung der Schadenstoleranz von CFK-Schaum-Sandwichstrukturen
Aachen: Shaker, 2011
(Forschungsbericht - Technische Universität Braunschweig, Campus Forschungsflughafen 2)
Zugl.: Braunschweig, TU, Diss., 2011
Rinker, M.; John, M.; Zahlen, P.C.; Schäuble, R.:
Face sheet debonding in CFRP/PMI sandwich structures under quasi-static and fatigue loading considering residual thermal stress
In: Engineering fracture mechanics, Vol.78 (2011), No.17, pp.2835-2847
Roth, J.; Karlin, J.; Ulrich, C.; Trebin, H.-R.; Sonntag, S.:
Laser ablation of aluminium: Drops and voids
(Workshop on High Performance Computing in Science and Engineering <14, 2011, Stuttgart>)
In: Nagel, W.E.: High performance computing in science and engineering '11 : Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2011. Heidelberg: Springer, 2011, pp. 93-104
Sandfeld, S.; Hochrainer, T.; Zaiser, M.; Gumbsch, P.:
Continuum modeling of dislocation plasticity: Theory, numerical implementation, and validation by discrete dislocation simulations
In: Journal of Materials Research, Vol.26 (2011), No.5, pp.623-632
Schlangen, R.; Motegi, S.; Nagatomo, T.; Schmidt, C.; Altmann, F.; Murakami, H.; Hollingshead, S.:
Use of lock-in thermography for non-destructive 3D defect localization on system in package and stacked-die technology
(International Symposium for Testing and Failure Analysis (ISTFA) <37, 2011, San Jose/Calif.>)
In: ASM International: ISTFA 2011, 37th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 13-17, 2011, San Jose Convention Center, San Jose, California, USA. Materials Park, Ohio: ASM International, 2011, pp. 68-73
Schmidt, C.; Altmann, F.:
Quantitative phase shift analysis for 3D defect localization using lock-in thermography
(International Symposium for Testing and Failure Analysis (ISTFA) <37, 2011, San Jose/Calif.>)
In: ASM International: ISTFA 2011, 37th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 13-17, 2011, San Jose Convention Center, San Jose, California, USA. Materials Park, Ohio: ASM International, 2011, pp. 74-80
Schmidt, I.:
Numerical homogenisation of an elasto-plastic model-material with large elastic strains: Macroscopic yield surfaces and the Eulerian normality rule
In: Computational mechanics, Vol.48 (2011), No.5, pp.579-590
Schmitt, W.; Blug, B.:
Simulationsmethoden zur Werkstoff- und Schichtoptimierung
In: Galvanotechnik, Vol.102 (2011), No.2, pp.249-252
Schulze, S.-H.; Pander, M.; Naumenko, K.; Girchenko, A.; Altenbach, H.:
Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
In: Altenbach, H. (Ed.) et al.: Shell-like structures: Non-classical theories and applications. Berlin: Springer, 2011. (Advanced structured materials 15), pp. 499-506
Schwienheer, M.; Scholz, A; Berger, C.; Feuillette, C.; Klein, T.; Hartrott, P. von; Schlesinger, M.; Kern, T.-U.:
Rechnerische Beschreibung der Verformung und Schädigung von Werkstoffen für Hochtemperatur-Dampfturbinen bis 720°C
(Arbeitsgemeinschaft für Warmfeste Stähle und Arbeitsgemeinschaft für Hochtemperaturwerkstoffe (Vortragsveranstaltung) <34, 2011, Düsseldorf>)
In: Verein Deutscher Eisenhüttenleute -VDEh-, Arbeitsgemeinschaft für Warmfeste Stähle: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe: Beiträge zur 34. Vortragsveranstaltung der Arbeitsgemeinschaft für Warmfeste Stähle und der Arbeitsgemeinschaft für Hochtemperaturwerkstoffe am 25. November 2011 im Stahl-Zentrum in Düsseldorf. Düsseldorf: VDEh, 2011, pp. 83-98
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.:
Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens
In: Acta Materialia, Vol.59 (2011), No.8, pp.2937-2947
urn:nbn:de:0011-n-1725391
Senger, J.; Weygand, D.; Kraft, O.; Gumbsch, P.:
Dislocation microstructure evolution in cyclically twisted microsamples: A discrete dislocation dynamics simulation
In: Modelling and simulation in materials science and engineering, Vol.19 (2011), No.7, Art. 074004
Shimada, T.; Wang, X.; Tomoda, S.; Marton, P.; Elsässer, C.; Kitamura, T.:
Coexistence of rectilinear and vortex polarizations at twist boundaries in ferroelectric PbTiO3 from first principles
In: Physical Review. B, Vol.83 (2011), No.9, Art. 094121
Siegele, D.; Varfolomeev, I.; Hohe, J.:
Advanced concepts for fracture mechanics based assessment of components under thermal loading
(Staatliche Materialprüfungsanstalt (MPA Seminar) <37, 2011, Stuttgart>)
In: Staatliche Materialprüfungsanstalt -MPA-, Stuttgart: 37. MPA-Seminar 2011. CD-ROM: "Werkstoff- & Bauteilverhalten in der Energie- & Anlagentechnik" am 6. und 7. Oktober 2011, Hotel LeMeridien, Stuttgart. Stuttgart: MPA, 2011. (MPA-Seminar 37), 19 pp.
Siegele, D.:
Advanced simulation (and/or measurement) of welding deformation and residual stress
In: Yosetsu-gakkai-shi = Journal of the Japan Welding Society, Vol.80 (2011), No.1, pp.120-130
Siegele, D.:
Welding mechanics for advanced component safety assessment
In: Frontiers of materials science, Vol.5 (2011), No.2, pp.224-235
urn:nbn:de:0011-n-1725346
Skrzypczak, U.; Miclea, M.; Stalmashonak, A.; Ahrens, B.; Henke, B.; Seifert, G.; Johnson, J.A.; Schweizer, S.:
Time-resolved investigations of erbium ions in ZBLAN-based glasses and glass ceramics
In: Physica status solidi. C, Vol.8 (2011), No.9, pp.2649-2652
Skrzypczak, U.; Williams, G.V.M.; Miclea, M.; Bhuiyan, M.D.H.; Janseens, S.; Schweizer, S.:
Z-scan characterization of zwitterionic chromophores for optoelectronic switching
In: Applied physics. A, Vol.104 (2011), No.3, pp.947-951
Sommer, S.; Maier, J.:
Failure modeling of a self piercing riveted joint using LS-DYNA
(European LS-DYNA Users Conference <8, 2011, Strasbourg>)
In: 8th European Users Conference 2011: May 23rd - 24th, 2011, Strasbourg, France. Solihull, UK: Arup, 2011, 11 pp.
Sommer, S.; Burget, S.; Bentele, R.:
Simulation des Bruchverhaltens von Schweisspunkten mit erweitertem Schädigungsmodell
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <43, 2011, Rostock>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen; 43. Tagung des DVM-Arbeitskreises Bruchvorgänge, 22. + 23. Februar 2011, Rostock. Berlin: DVM, 2011. (DVM-Bericht 243), pp. 17-26
Steier, V.; Koplin, C.; Kailer, A.; Reinecke, H.:
Investigation of the adhesion promoter distribution in porous ceramic precursors
In: ISRN mechanical engineering. Online journal, (2011), Artikel ID 304129; 9 pp.
urn:nbn:de:0011-n-2125982
Steier, V.; Koplin, C.; Kailer, A.; Reinecke, H.:
Polymer infiltrated ceramics - bonding strength of an adhesion promoter using pull-off-and sheartest
(Symposium Verbundwerkstoffe und Werkstoffverbunde <18, 2011, Chemnitz>)
In: Wielage, B.: Verbundwerkstoffe. 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011: 30. März bis 01. April 2011, Chemnitz. Chemnitz: Technische Universität Chemnitz, 2011. (Schriftenreihe Werkstoffe und Werkstofftechnische Anwendungen 41), pp. 196-201
Sun, D.-Z.:
Crashverhalten von metallischen Werkstoffen und deren Fügeverbindungen
In: Henning, Frank (Ed.) et al.: Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. München: Hanser, 2011, pp. 1020-1032
Teuscher, N.; Schubert, W.; Heilmann, A.:
Optische Schichtdickenmessung von funktionellen Nassbeschichtungen auf Kunststofffolien
In: Coating international, Vol.44 (2011), No.9, pp.25-29
Teuscher, N.; Schubert, W.; Heilmann, A.:
Optische Schichtdickenmessung von funktionellen Nassbeschichtungen auf Kunststofffolien (Teil 2)
In: Coating international, Vol.44 (2011), No.9, pp.13-18
Thelke, J.; Schickdanz, R.; Otschik, J.; Droescher, P.; Werdecker, F.; Lang, K.; Keller, T.; Schulten, B.; Haselbacher, P.; Johannes, R.; Meier, Sven; Schnakenberg, Stefan:
Gleitring einer Gleitringdichtungsanordnung mit laufzeitverlängernden Eigenschaften sowie Verfahren zu dessen Herstellung
2011
Uhrig, D.; Schlegel, R.; Weidisch, R.; Mays, J.:
Multigraft copolymer superelastomers: Synthesis morphology, and properties
In: European polymer journal : EPJ, Vol.47 (2011), No.4, pp.560-568
urn:nbn:de:0011-n-1632516
Ulrich, C.M.; Hashibon, A.; Svoboda, J.; Elsässer, C.; Helm, D.; Riedel, H.:
Diffusion kinetics in aluminium-gold bond contacts from first-principles density functional calculations
In: Acta Materialia, Vol.59 (2011), No.20, pp.7634-7644
urn:nbn:de:0011-n-1888249
Upping, J.; Salzer, R.; Otto, M.; Beckers, T.; Steidl, L.; Zentel, R.; Carius, R.; Wehrspohn, R.B.:
Transparent conductive oxide photonic crystals on textured substrates
In: Photonics and nanostructures, Vol.9 (2011), No.1, pp.31-34
urn:nbn:de:0011-n-1633663
Urban, A.; Reese, M.; Mrovec, M.; Elsässer, C.; Meyer, B.:
Parameterization of tight-binding models from density functional theory calculations
In: Physical Review. B, Vol.84 (2011), No.15, Art. 155119
Utzig, J.; Busch, M.:
Verfahren zur Herstellung von kürzerkettigen Kunststoffen und wachsartigen Produkten aus höhermolekularen Polymeren
2011
Varfolomeev, I.; Mayinger, W.:
Consideration of thermally induced bending load in failure assessment of piping components
(Pressure Vessels and Piping Conference <2011, Baltimore/Md>)
In: Mertiny, P.: ASME Pressure Vessels and Piping Conference 2011. Proceedings. Vol.3: Design and analysis: July 17 - 21, 2011, Baltimore, Maryland, USA. New York/NY.: ASME, 2011, pp. 603-608
Varfolomeev, I.; Ivanov, D.; Siegele, D.:
A Critical evaluation of methods for computing small failure probabilities for ductile piping components
(Pressure Vessels and Piping Conference (PVP) <2011, Baltimore/Md>)
In: Mertiny, P.: ASME Pressure Vessels and Piping Conference 2011. Proceedings. Vol.1: Codes and Standards: July 17 - 21, 2011, Baltimore, Maryland, USA. New York/NY.: ASME, 2011, pp. 561-568
Varfolomeev, I.; Luke, M.; Burdack, M.:
Effect of specimen geometry on fatigue crack growth rates for the railway axle material EA4T
(TC24 Meeting <2008, Milano>)
In: Beretta, S.: Damage tolerance of railway axles: Result of a TC24 meeting held at Politecnico di Milano, Dipartimento di Meccanica, on 13 - 14th October 2008. Amsterdam: Elsevier, 2011. (Engineering fracture mechanics 78.2011, Nr.5), pp. 742-753
Varfolomeev, I.; Ivanov, D.; Siegele, D.:
Weiterentwicklung von rechnerischen Methoden zur probabilistischen Fehlerbewertung von duktilen Rohrleitungen
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <43, 2011, Rostock>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen; 43. Tagung des DVM-Arbeitskreises Bruchvorgänge, 22. + 23. Februar 2011, Rostock. Berlin: DVM, 2011. (DVM-Bericht 243), pp. 35-44
Völker, B.; Marton, P.; Elsässer, C.; Kamlah, M.:
Multiscale modeling for ferroelectric materials: A transition from the atomic level to phase-field modeling
In: Continuum Mechanics and Thermodynamics, Vol.23 (2011), No.5, pp.435-451
Walter, M.; Moseler, M.; Whetten, R.L.; Häkkinen, H.:
A 58-electron superatom-complex model for the magic phosphine-protected gold clusters (Schmid-gold, Nanogold (R)) of 1.4-nm dimension
In: Chemical Science, Vol.2 (2011), No.8, pp.1583-1587
Wehrspohn, R.; Gesemann, B.; Pergande, D.; Geppert, T.; Schweizer, S.; Moretton, S.; Lambrecht, A.:
Periodic silicon nanostructures for spectroscopic microsensors
(Active Photonic Materials Conference <4, 2011, San Diego/Calif.>)
In: Subramania, G.S.: Active photonic materials IV: 22 - 25 August 2011, San Diego, California, United States; Part of SPIE optics + photonics. Bellingham, WA: SPIE, 2011. (Proceedings of SPIE 8095), Paper 809508
Weps, M.; Zierdt, P.:
Polymerverbund für die Photovoltaik: Ermittlung von Haftfestigkeiten innerhalb eines Polymerverbundes
In: Konstruktion, (2011), No.10, pp.IW6-IW7
Wonisch, A.; Polfer, P.; Kraft, T.; Dellert, A.; Heunisch, A.; Roosen, A.:
A comprehensive simulation scheme for tape casting: From flow behavior to anisotropy development
In: Journal of the American Ceramic Society, Vol.94 (2011), No.7, pp.2053-2060
Zhang, X.F.; Andrieux, F.; Sun, D.Z.:
Pseudo-elastic description of polymeric foams at finite deformation with stress softening and residual strain effects
In: Materials and design, Vol.32 (2011), No.2, pp.877-884