Fraunhofer IWM


Scientific Publications


Altmann, F.; Petzold, M.; Schmidt, C.; Salzer, R.; Cassidy, C.; Tesch, P.; Smith, N.:
Characterization and failure analysis of 3D integrated semiconductor devices-novel tools for fault isolation, target preparation and high resolution material analysis
(International Symposium for Testing and Failure Analysis (ISTFA) <36, 2010, Dallas/Tex.>)
In: Electronic Device Failure Analysis Society -EDFAS-, Materials Park/Ohio: ISTFA 2010, 36th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 14 - 18, 2010, InterContinental Hotel Dallas, [Addison], Dallas, Texas, USA. Materials Park, Ohio: ASM International, 2010, pp. 163-170
Altmann, F.; Schischka, J.; Ngo, V. van; Stone, S.; Kwakman, L.F.T.; Lehmann, R.:
Combined electron beam induced current imaging (EBIC) and focused ion beam (FIB) techniques for thin film solar cell characterization
(International Symposium for Testing and Failure Analysis (ISTFA) <36, 2010, Dallas/Tex.>)
In: Electronic Device Failure Analysis Society -EDFAS-, Materials Park/Ohio: ISTFA 2010, 36th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 14 - 18, 2010, InterContinental Hotel Dallas, [Addison], Dallas, Texas, USA. Materials Park, Ohio: ASM International, 2010, pp. 151-157
Altmann, F.; Schmidt, C.; Brand, S.; Czurratis, P.; Petzold, M.:
Failure diagnostics for 3D system integration technologies in microelectronics
(International Symposium on Semiconductor Wafer Bonding: Science, Technology, and Applications <11, 2010, Las Vegas/Nev.>)
In: Colinge, C.: Semiconductor Wafer Bonding 11. Science, Technology, and Applications: In honor of Ulrich Gösele; Presented in the symposium entitled "Semiconductor Wafer Bonding 11: Science, Technology, and Applications - in Honor of Ulrich Gösele" held during the 218th meeting of the Electrochemical Society, in Las Vegas, Nevada from October 10 to 15, 2010. Pennington, NJ: ECS, 2010. (ECS transactions 33.2010, Nr.4), pp. 47-57
Amann, T.; Kailer, A.:
Ultralow friction of mesogenic fluid mixtures in tribological reciprocating systems
In: Tribology letters, Vol.37 (2010), No.2, pp.343-352
urn:nbn:de:0011-n-1187488
Amann, T.; Kailer, A.:
Ultralow friction of reciprocating systems lubricated by mesogenic fluids
(International Colloquium Tribology <17, 2010, Ostfildern>)
In: Bartz, W.J.: Solving Friction and Wear Problems. 17th International Colloquium Tribology 2010. Book of Synopses: 19-21 January 2010, Ostfildern, Germany. Ostfildern: TAE, 2010, pp. 101
Andrieux, F.; Sun, D.-Z.:
Damage modelling for simulation of process chain from forming to crash
In: International journal of materials research, Vol.101 (2010), No.8, pp.963-971
Antusch, S.; Dienwiebel, M.; Nold, E.; Albers, P.; Spicher, U.; Scherge, M.:
On the tribochemical action of engine soot
In: Wear, Vol.269 (2010), No.1-2, pp.1-12
urn:nbn:de:0011-n-1367235
Atrens, A.; Winzer, N.; Dietzel, W.:
Overview of stress corrosion cracking of magnesium alloys
(Annual Conference of the Australasian Corrosion Association <50, 2010, Adelaide>)
In: Australasian Corrosion Association -ACA-: 50th Annual Conference of the Australasian Corrosion Association 2010: Corrosion and Prevention 2010: 14-17 November 2010, Adelaide. Red Hook, NY: Curran, 2010, pp. 165-172
Bachurin, D.V.; Gumbsch, P.:
Accommodation processes during deformation of nanocrystalline palladium
In: Acta Materialia, Vol.58 (2010), No.16, pp.5491-5501
urn:nbn:de:0011-n-1438250
Bachurin, D.V.; Weygand, D.; Gumbsch, P.:
Dislocation-grain boundary interaction in <1 1 1> textured thin metal films
In: Acta Materialia, Vol.58 (2010), No.16, pp.5232-5241
urn:nbn:de:0011-n-1438246
Bachurin, DV.; Gumbsch, P.:
Molecular dynamics study of plastic deformation of nanocrystalline palladium
In: Nagel, W.E. et al.: High performance computing in science and engineering ' 09: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2009. Berlin: Springer, 2010, pp. 111-122
urn:nbn:de:0011-n-1332375
Baiker, M.; Helm, D.:
Modellierung und Simulation des Tiefziehverhaltens einphasiger Stähle am Beispiel von DC04
(Graduiertenkolleg 1483 (Jährliche Klausurtagung) <1, 2010, Karlsruhe>)
In: Pabst, R. (Ed.) et al.: 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen: Begleitband zur 1. jährlichen Klausurtagung 2010 ; [25. - 26.02.2010]. Aachen: Shaker, 2010. (Berichte aus der Fertigungstechnik), pp. 21-26
Baumgartner, K.; Ahrens, B.; Angelov, O.; Sendova-Vassileva, M.; Dimova-Malinovska, D.; Holländer, B.; Schweizer, S.; Carius, R.:
Efficiency of thin film silicon solar cells with spectral down-converter from rare-earth ion doped thin films
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 245-250
Baumgartner, K.; Holländer, B.; Carius, R.; Ahrens, B.; Angelov, O.; Sendova-Vassileva, M.; Dimova-Malinovska, D.; Schweizer, S.:
Photon down-conversion in Terbium(III)-doped thin dielectric films and fluorozirconate glasses for thin film solar cells
(Conference "Photonics for Solar Energy Systems" <3, 2010, Brussels>)
In: Wehrspohn, R.B.: Photonics for Solar Energy Systems III: 13.-15.4.2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7725), Paper 77250T
Bennemann, S.; Simon, M.; Petzold, M.; Altmann, F.:
Fehlermechanismen an Leiterplattenmetallisierungen für bleifrei gelötete Packageaufbauten
(Fachtagung Elektronische Baugruppen und Leiterplatten (EBL) <5, 2010, Fellbach>)
In: Lang, K.-D.: Elektronische Baugruppen und Leiterplatten, EBL 2010: Zuverlässigkeit und Systemintegration. Vorträge der 5. DVS/GMM-Tagung in Fellbach am 24. und 25. Februar 2010. Düsseldorf: DVS Media, 2010. (DVS-Berichte 265), pp. 246-250
Berlet, P.; Dienwiebel, M.; Scherge, M.:
The effect of sample finishing on the tribology of metal/metal lubricated contacts
In: Wear, Vol.268 (2010), No.11-12, pp.1518-1523
urn:nbn:de:0011-n-1367224
Berlet, P.; Dienwiebel, M.; Kehrwald, B.; Scherge, M.:
Verringerung von Reibung und Verschleiß durch optimierte spanende Endbearbeitung
In: Tribologie und Schmierungstechnik, Vol.57 (2010), No.1, pp.34-38
Bienger, P.; Helm, D.:
Mikrostrukturentwicklung in Walzprozessen am Beispiel von DC04
(Graduiertenkolleg 1483 (Jährliche Klausurtagung) <1, 2010, Karlsruhe>)
In: Pabst, R. (Ed.) et al.: 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen: Begleitband zur 1. jährlichen Klausurtagung 2010 ; [25. - 26.02.2010]. Aachen: Shaker, 2010. (Berichte aus der Fertigungstechnik), pp. 5-10
Boettcher, T.; Rother, M.; Liedtke, S.; Ullrich, M.; Bollmann, M.; Pinkernelle, A.; Gruber, D.; Funke, H.-J.; Kaiser, M.; Lee, K.; Li, M.; Leung, K.; Li, T.; Farrugia, M.L.; O'Halloran, O.; Petzold, M.; März, B.; Klengel, R.:
On the intermetallic corrosion of Cu-Al wire bonds
(Electronics Packaging Technology Conference (EPTC) <12, 2010, Singapore>)
In: Institute of Electrical and Electronics Engineers -IEEE-, Singapore Section, Reliability CPMT EDS Chapter: 12th Electronics Packaging Technology Conference, EPTC 2010: Singapore, 8 - 10 December 2010. New York, NY: IEEE, 2010, pp. 585-590
urn:nbn:de:0011-n-1725864
Böhme, W.:
Verfahren zur schwingungsarmen optischen Kraftmessung, insbesondere auch bei hohen Temperaturen
2010
Brand, M.; Asperheim, J.; Stiele, H.; Pfeiffer, W.:
Coupling of temperature fluxes induced by electromagnetic induction for transient 3D distortion and residual stress calculation in finite element codes
(International Symposium on Heating by Electromagnetic Sources (HES) <2010, Padua>)
In: Lupi, S. (Ed.): Induction, dielectric and microwaves, conduction & electromagnetic processing: International Symposium on Heating by Electromagnetic Sources: Padua, May 18 - 21, 2010. Padova: Servizi Grafici Editoriali, 2010, pp. 201-208
Brand, S.; Petzold, M.; Czurratis, P.; Hoffrogge, P.:
Extending acoustic microscopy for comprehensive failure analysis applications
(International Symposium for Testing and Failure Analysis (ISTFA) <36, 2010, Dallas/Tex.>)
In: Electronic Device Failure Analysis Society -EDFAS-, Materials Park/Ohio: ISTFA 2010, 36th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 14 - 18, 2010, InterContinental Hotel Dallas, [Addison], Dallas, Texas, USA. Materials Park, Ohio: ASM International, 2010, pp. 84-91
Brochard, S.; Hirel, P.; Pizzagalli, L.; Godet, J.:
Elastic limit for surface step dislocation nucleation in face-centered cubic metals: Temperature and step height dependence
In: Acta Materialia, Vol.58 (2010), No.12, pp.4182-4190
Butz, A.; Springub, B.; Roters, F.; Lossau, S.:
Numerische Modellierung von Dualphasenstählen bei Herstellung, Verarbeitung und im Bauteil. Teil 1: Mikrostrukturbasierte Simulation vom Warmband bis zum Umformen
(Europäische Forschungsgesellschaft für Blechverarbeitung (Kolloquium) <30, 2010, Bad Boll>)
In: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. -EFB-: Bauteile der Zukunft - Methoden und Prozesse: Tagungsband T31 des 30. EFB-Kolloquiums Blechverarbeitung, 2. und 3. März 2010, Bad Boll. Hannover: EFB, 2010. (EFB-Kolloquium T31), pp. 399-409
Butz, A.; Lossau, S.; Springub, B.; Roters, F.:
On the modeling of dual phase steels: Microstructure-based simulation from the hot rolled sheet to the deep drawn component
(International Conference on Material Forming <13, 2010, Brescia>)
In: Ceretti, E.: 13th ESAFORM Conference on Material Forming 2010. Proceedings: Brescia (Italy), 7-9 April 2010. Berlin: Springer, 2010. (International Journal of Material Forming 3.2010, Supplement 1), pp. 73-76
urn:nbn:de:0011-n-1726153
Butz, A.; Helm, D.:
Virtuelle Werkstoffcharakterisierung für die Umformsimulation
In: wt Werkstattstechnik online, (2010), 10, pp.817-818
Cheng, Y.; Bitzek, E.; Weygand, D.; Gumbsch, P.:
Atomistic simulation of dislocation void interactions under cyclic loading
In: Modelling and simulation in materials science and engineering, Vol.18 (2010), No.2, Art.025006, 11 pp.
Descas, R.; Helm, D.:
Mikromechanisch basierte Modellierung der Umformgrenzen von Blechwerkstoffen
(Graduiertenkolleg 1483 (Jährliche Klausurtagung) <1, 2010, Karlsruhe>)
In: Pabst, R. (Ed.) et al.: 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen: Begleitband zur 1. jährlichen Klausurtagung 2010 ; [25. - 26.02.2010]. Aachen: Shaker, 2010. (Berichte aus der Fertigungstechnik), pp. 131-136
Dienwiebel, M.; Scherge, M.; Gumbsch, P.:
Message from the Scientific Organizers
In: Tribology letters, Vol.39 (2010), No.1, pp.1
Dietzel, W.; Pfuff, M.; Winzer, N.:
Testing and mesoscale modelling of hydrogen assisted cracking of magnesium
In: Engineering fracture mechanics, Vol.77 (2010), No.2, pp.257-263
Dresbach, C.; Mittag, M.; Petzold, M.:
Elastic properties of bonding wires
(Electronics System Integration Technology Conference (ESTC) <3, 2010, Berlin>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 3rd Electronics System Integration Technology Conference, ESTC 2010. Proceedings. Vol.1: Berlin, Germany, 13 - 16 September 2010. New York, NY: IEEE, 2010, pp. 479-482
urn:nbn:de:0011-n-1725732
Duffe, S.; Grönhagen, N.; Patryarcha, L.; Sieben, B.; Yin, C.R.; Issendorff, B. von; Moseler, M.; Hövel, H.:
Penetration of thin C-60 films by metal nanoparticles
In: Nature nanotechnology, Vol.5 (2010), No.5, pp.335-339
Dyrba, M.; Miclea, P.T.; Schweizer, S.:
Spectral down-conversion in Sm-doped borate glasses for photovoltaic applications
(Conference "Photonics for Solar Energy Systems" <3, 2010, Brussels>)
In: Wehrspohn, R.B.: Photonics for Solar Energy Systems III: 13.-15.4.2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7725), Paper 77251D
Dyrba, M.; Miclea, P.-T.; Schweizer, S.:
Spectral down-conversion in sm-doped borate glasses for photovoltaic applications
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 375-377
Dyrba, M.; Miclea, P.-T.; Schweizer, S.:
Surface plasmons for fluorescence enhancement in Sm-doped borate glasses
In: Radiation measurements, Vol.45 (2010), 3-6, pp.314-316
Eidel, B.; Hartmaier, A.; Gumbsch, P.:
Atomistic simulation methods and their application on fracture
In: Pippan, R. (Ed.) et al.: Multiscale modelling of plasticity and fracture by means of dislocation mechanics. Wien: Springer, 2010. (International Centre for Mechanical Sciences. Courses and lectures 522), pp. 1-58
Elsässer, C.; et al.:
The structure of grain boundaries in strontium titanate: Theory, simulation, and electron microscopy
In: Annual review of materials research, Vol.40 (2010), pp.557-599
Erünal, E.; Eichel, R.A.; Körbel, S.; Elsässer, C.; Acker, J.; Kungl, H.; Hoffmann, M.J.:
Defect structure of copper doped potassium niobate ceramics
In: Functional materials letters : FML, Vol.3 (2010), No.1, pp.19-24
Fernández-Canteli, A.; Castillo, E.; Siegele, D.:
A crack growth rate model compatible with the wöhler field
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010
Fiedler, J.; Busch, M.; Krombholz, A.:
Celluloseregeneratfaserverstärkte Thermoplaste - Verarbeitung und resultierende Eigenschaften
In: GAK. Gummi, Fasern, Kunststoffe, Vol.63 (2010), No.12, pp.766-771
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2010/1
Freiburg/Brsg.: Fraunhofer IWM, 2010
urn:nbn:de:0011-n-1373580
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2009
Freiburg/Brsg.: Fraunhofer IWM, 2010
urn:nbn:de:0011-n-1299185
Frensemeier, M.; Koplin, C.; Jaeger, R.; Kramer, F.; Klemm, D.:
Mechanical properties of bacterially synthesized nanocellulose hydrogels
(Cellulose Symposium <51, 2009, Wiesbaden>)
In: Heinze, T.: Utilization of lignocellulosic materials: Selected contributions from the conference: 51st Cellulose Symposium in: Wiesbaden (Germany), June 23 to 24, 2009. Weinheim: Wiley-VCH, 2010. (Macromolecular symposia 294.2010, Nr.2), pp. 38-44
urn:nbn:de:0011-n-1725994
Friedmann, V.; Siegele, D.:
Damage behaviour of nickel-based transition welds under cyclic thermomechanical loading
In: Materials at high temperatures, Vol.27 (2010), No.1, pp.35-43
Gall, M.; Thielicke, B.:
Performance characterization and failure analysis for laminar PZT components
(International Conference on New Actuators (ACTUATOR) <12, 2010, Bremen>)
In: Borgmann, H.: ACTUATOR 2010, 12th International Conference on New Actuators & 6th International Exhibition on Smart Actuators and Drive Systems. Conference Proceedings: 14. - 16. Juni 2010, Bremen, Germany. Bremen: WFB, 2010, pp. 605-608
Ganapati, V.; Schoenfelder, S.; Castellanos, S.; Oener, S.; Koepge, R.; Sampson, A.; Marcus, M.A.; Lai, B.; Morhenn, H.; Hahn, G.; Bagdahn, J.; Buonassisi, T.:
Infrared birefringence imaging of residual stress and bulk defects in multicrystalline silicon
In: Journal of applied physics, Vol.108 (2010), No.6, Art. 063528, 13 pp.
Grimm, S.; Martin, J.; Rodriguez, G.; Fernandez-Gutierrez, M.; Mathwig, K.; Wehrspohn, R.B.; Gösele, U.; San Roman, J.; Mijangos, C.; Steinhart, M.:
Cellular interactions of biodegradable nanorod arrays prepared by nondestructive extraction from nanoporous alumina
In: Journal of Materials Chemistry, Vol.20 (2010), No.16, pp.3171-3177
Gu, D.; Baumgart, H.; Naumann, F.; Petzold, M.:
Finite element modeling and Raman study of strain distribution in patterned device islands on strained Silicon-on-Insulator (sSOI) substrates
(International Symposium on Semiconductor Wafer Bonding: Science, Technology, and Applications <11, 2010, Las Vegas/Nev.>)
In: Colinge, C.: Semiconductor Wafer Bonding 11. Science, Technology, and Applications: In honor of Ulrich Gösele; Presented in the symposium entitled "Semiconductor Wafer Bonding 11: Science, Technology, and Applications - in Honor of Ulrich Gösele" held during the 218th meeting of the Electrochemical Society, in Las Vegas, Nevada from October 10 to 15, 2010. Pennington, NJ: ECS, 2010. (ECS transactions 33.2010, Nr.4), pp. 529-535
Gumbsch, P.; Giessen, E. van der; Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fifth International Conference Multiscale Materials Modeling, MMM 2010. Proceedings: October 4-8, 2010, Freiburg, Germany
(International Conference Multiscale Materials Modeling (MMM) <5, 2010, Freiburg/Brsg.>)
Stuttgart: Fraunhofer Verlag, 2010
ISBN 3-8396-0166-5
ISBN 978-3-8396-0166-2
Gumbsch, P.:
Prof. Dr. Hermann Riedel on the occasion of his 65(th) birthday, January 3, 2010
In: International journal of materials research, Vol.101 (2010), No.1, pp.143-144
Gurr, M.; Thomann, Y.; Nedelcu, M.; Kübler, R.; Könczöl, L.; Mülhaupt, R.:
Novel acrylic nanocomposites containing in-situ formed calcium phosphate/layered silicate hybrid nanoparticles for photochemical rapid prototyping, rapid tooling and rapid manufacturing processes
In: Polymer, Vol.51 (2010), No.22, pp.5058-5070
Hardenacke, V.; Hohe, J.:
Assessment of space division strategies for generation of adequate computational models for solid foams
In: International journal of mechanical sciences, Vol.52 (2010), 12, pp.1772-1782
Hardenacke, V.; Hohe, J.; Luckow, S.; Siegele, D.:
An enhanced model for probabilistic cleavage fracture assessment considering local constraint effects
(Gesellschaft für Angewandte Mathematik und Mechanik GAMM (Jahrestagung) <81, 2010, Karlsruhe>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.10 (2010), No.1, pp.115-116
Hardenacke, V.; Hohe, J.; Friedmann, V.; Siegele, D.:
Enhancement of local approach models for the assessment of cleavage fracture based on micromechanical investigations
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010
Hashibon, A.; Elsässer, C.:
Approaches to atomistic triple-line properties from first-principles
In: Scripta materialia, Vol.62 (2010), No.12, pp.939-944
urn:nbn:de:0011-n-1337642
Heierli, J.; Zaiser, M.; Gumbsch, P.:
Der Knall im Lawinenhang: Die Ursache von Schneebrettlawinen
In: Physik in unserer Zeit, Vol.41 (2010), No.1, pp.31-34
Held, J.; Gaspar, J.; Ruther, P.; Hagner, M.; Cismak, A.; Heilmann, A.; Paul, O.:
Design of experiment characterization of microneedle fabrication processes based on dry silicon etching
In: Journal of micromechanics and microengineering, Vol.20 (2010), No.2, Art. 025024
Helm, D.:
Thermomechanical representation of the stored energy during plastic deformation
In: International journal of materials research, Vol.101 (2010), No.8, pp.972-980
Henke, B.; Pientka, F.; Johnson, J.A.; Ahrens, B.; Miclea, P.T.; Schweizer, S.:
Saturation effects in the upconversion efficiency of Er-doped fluorozirconate glasses
In: Journal of Physics. Condensed Matter, Vol.22 (2010), No.15, Art.155107, 6 pp.
urn:nbn:de:0011-n-1314997
Henke, B.; Keil, P.; Paßlick, C.; Vogel, D.; Rohwerder, M.; Wiegand, M.; Johnson, J.A.; Schweizer, S.:
XANES studies on Eu-doped fluorozirconate-based glass ceramics
(Materials Research Society (Spring Meeting) <2010, San Francisco/Calif.>)
In: Wang, C. (Ed.): In-situ and operando probing of energy materials at multiscale down to single atomic column: The power of X-rays, neutrons and electron microscopy: Symposium held April 5 - 9, 2010, San Francisco, California; Papers presented at Symposium V, "In Situ Transmission Electron Microscopy and Spectroscopy", and Symposium W, "Diagnostics and Characterization of Energy Materials with Synchrotron Neutron Radiation" held at the 2010 MRS spring meeting. Warrendale, Pa.: MRS, 2010. (Materials Research Society Symposium Proceedings 1262), pp. 137-144
Herwijnen, A. van; Schweizer, J.; Heierli, J.:
Measurement of the deformation field associated with fracture propagation in weak snowpack layers
In: Journal of geophysical research. F, Earth surface, Vol.115 (2010), Art. F03042, 10 pp.
Hildenbrand, J.; Peter, C.; Lamprecht, F.; Kürzinger, A.; Naumann, F.; Ebert, M.; Wehrspohn, R.; Korvink, J.G.; Wöllenstein, J.:
Fast transient temperature operating micromachined emitter for mid-infrared optical gas sensing systems. Design, fabrication, characterization and optimization
(Europe Symposium "Microtechnologies for the New Millennium" <2009, Dresden>)
In: Becker, T.: Special issue of the Conference "Smart Sensors, Actuators and MEMS", within the SPIE Europe Symposium "Microtechnologies for the New Millennium" 2009: Dresden, Germany, 4 - 6 May 2009. Berlin: Springer, 2010. (Microsystem technologies 16.2010, Nr.5), pp. 745-754
Hirel, P.; Marton, P.; Mrovec, M.; Elsässer, C.:
Theoretical investigation of {110} generalized stacking faults and their relation to dislocation behavior in perovskite oxides
In: Acta Materialia, Vol.58 (2010), No.18, pp.6072-6079
Hohe, J.; Brand, M.; Siegele, D.:
Behavior of cracks in cladded components under consideration of residual stresses
(European Conference on Fracture (ECF) <17, 2008, Brno>)
In: Dlouhý, I.: 17th European Conference on Fracture 2008: Held in Brno in September 2 - 5, 2008. Amsterdam: Elsevier, 2010. (Engineering failure analysis 17.2010, Nr.3), pp. 1948-1955
Hohe, J.; Brand, M.; Siegele, D.:
Behaviour of sub-clad and through-clad cracks under consideration of the residual stress field
In: Engineering fracture mechanics, Vol.77 (2010), No.2, pp.217-228
urn:nbn:de:0011-n-1250813
Hohe, J.; Hardenacke, V.; Siegele, D.:
Constraint corrected cleavage fracture assessment based on tests of standard and small scale cruciform specimens
(Pressure Vessels and Piping Conference (PVP) <2009, Prague>)
In: Segall, A.: ASME Pressure Vessels and Piping Conference 2009. Proceedings. Vol.3: Design and analysis: Presented at 2009 ASME Pressure Vessels and Piping Conference, July 26 - 30, 2009, Prague, Czech Republic. New York/NY.: ASME, 2010, pp. 343-350
Hohe, J.; Hardenacke, V.; Luckow, S.; Siegele, D.:
An enhanced probabilistic model for cleavage fracture assessment accounting for local constraint effects: Dedicated to Prof. Dr.-Ing. Dietmar Gross on occasion of his 65th birthday
(International Conference on Fracture (ICF) <12, 2009, Ottawa>)
In: Zhang, C.: Computational mechanics in fracture and damage. A special issue in honor of Prof. Gross: A special session "Computational Dynamic Fracture Mechanics & Meso- and Micromechanical Aspects of Fracture" was held at the 12th International Conference on Fracture (ICF 12), July 12 - 17, 2009, Ottawa, Ontario, Canada. Amsterdam: Elsevier, 2010. (Engineering fracture mechanics 77.2010, Nr.18), pp. 3573-3591
urn:nbn:de:0011-n-1725850
Hohe, J.:
Load and frequency interaction in dynamic buckling of soft-core sandwich plates and shells
(Gesellschaft für Angewandte Mathematik und Mechanik GAMM (Jahrestagung) <81, 2010, Karlsruhe>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.10 (2010), No.1, pp.165-166
Hohe, J.; Beckmann, C.; Reinfried, M.; Luthardt, F.:
Numerical prediction of the macroscopic material response for the design of solid foams with structural hierarchy
(International Conference on Cellular Materials (CellMat) <2010, Dresden>)
In: Stephani, G. et al.: International Conference on Cellular Materials, CellMat 2010. Proceedings: Held in Dresden, Germany from 27-29 Oct 2010. Dresden, 2010, pp. 353-358
Hohe, J.; Gumbsch, P.:
On the potential of tungsten-vanadium composites for high temperature application with wide-range thermal operation window
In: Journal of nuclear materials, Vol.400 (2010), No.3, pp.218-231
urn:nbn:de:0011-n-1367063
Hohe, J.; Beckmann, C.; Hardenacke, V.:
Strategies for numerical prediction of the uncertainty in the material response of solid foams
(International Conference on Materials for Energy <1, 2010, Karlsruhe>)
In: Deutsche Gesellschaft für Chemisches Apparatewesen, Chemische Technik und Biotechnologie e.V. -DECHEMA-, Frankfurt/Main: First International Conference on Materials for Energy 2010. Extended abstracts. Book B: July 4 - 8, 2010, Convention Center Karlsruhe, Germany. Frankfurt/Main: DECHEMA, 2010, pp. 960-962
Horn, G.P.; Gerbach, R.; Lin, T.-W.; Bernach, M.; Brand, S.; Johnson, H.T.:
Development of nonuniform residual stresses during anodic bonding
(International Symposium on Semiconductor Wafer Bonding: Science, Technology, and Applications <11, 2010, Las Vegas/Nev.>)
In: Colinge, C.: Semiconductor Wafer Bonding 11. Science, Technology, and Applications: In honor of Ulrich Gösele; Presented in the symposium entitled "Semiconductor Wafer Bonding 11: Science, Technology, and Applications - in Honor of Ulrich Gösele" held during the 218th meeting of the Electrochemical Society, in Las Vegas, Nevada from October 10 to 15, 2010. Pennington, NJ: ECS, 2010. (ECS transactions 33.2010, Nr.4), pp. 553-562
Jiao, M.; Rehl, A.; Sagel, A.; Mollenhauer, O.; Scherge, M.:
Friction and wear studies of AISi liners
(International Colloquium Tribology <17, 2010, Ostfildern>)
In: Bartz, W.J.: Solving Friction and Wear Problems. 17th International Colloquium Tribology 2010. Book of Synopses: 19-21 January 2010, Ostfildern, Germany. Ostfildern: TAE, 2010, pp. 66
Kadkhodapour, J.; Andrieux, F.; Ziaei Rad, S.; Schmauder, S.:
Simulation of void growth and coalescence in ferritic steels
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010
Kailer, A.:
Europäische Nachrichten aus Jülich
In: Werkstoffe in der Fertigung, (2010), No.1, pp.6
Kailer, A.; Amann, T.; Krummhauer, O.; Gumbsch, P.:
Vorrichtung und Verfahren zum Betrieb eines tribologisch belasteten Bauteils
2010
Kailer, A.:
Werkzeuge und Komponenten aus Hochleistungskeramik: Besser und günstiger Walzen
In: Konstruktion, (2010), No.7-8, pp.IW8-IW9
Kalivoda, E.M.:
Electronic structure and transport properties of transition-metaI/ SrTi03(100) heterojunctions
(International Conference Multiscale Materials Modeling (MMM) <5, 2010, Freiburg/Brsg.>)
In: Gumbsch, P. et al.: Fifth International Conference Multiscale Materials Modeling, MMM 2010. Proceedings: October 4-8, 2010, Freiburg, Germany. Stuttgart: Fraunhofer Verlag, 2010, pp. 777-780
Khader, I.; Kailer, A.:
Damage mechanisms in silicon nitride wire-rolling tools: Lab-scale experiments and correlation with finite element modeling
In: Journal of materials processing technology, Vol.210 (2010), No.10, pp.1314-1325
Khalil, O.; Schweizer, C.; Hartrott, P. von; Lang, K.-H.; Riedel, H.; Seifert, T.:
Verbesserte Methoden zur Lebensdauerberechnung von Abgasturbolader-Radialverdichterräder aus hochwarmfesten Aluminiumlegierungen
(Informationstagung Turbomaschinen <2010, Bad Neuenahr>)
In: Forschungsvereinigung Verbrennungskraftmaschinen e.V., Frankfurt/Main: Informationstagung Turbomaschinen : Frühjahrstagung 2010: Abschluss- und Zwischenberichte der Forschungsstellen, gehalten auf der Informationstagung der FVV am 15. April 2010 in Bad Neuenahr. Frankfurt a.M.: FVV, 2010. (Forschungsvereinigung Verbrennungskraftmaschinen R 550), pp. 135-149
Kleine, A.; Koch, H.; Böhme, W.:
Untersuchungen zur Charakterisierung von crashrelevantem Bauteilverhalten
In: Gießerei, Vol.97 (2010), 5, pp.34-42
Knoll, H.; Weidenauer, W.; Ingram, P.; Bennemann, S.; Brand, S.; Petzold, M.:
Ceramic substrates with aluminum metallization for power application
(Electronics System Integration Technology Conference (ESTC) <3, 2010, Berlin>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 3rd Electronics System Integration Technology Conference, ESTC 2010. Proceedings. Vol.2: Berlin, Germany, 13 - 16 September 2010. New York, NY: IEEE, 2010, pp. 782-786
Kohn, C.; Hug, M.; Kübler, R.; Krappitz, M.; Kleer, G.:
Increase of the strength of screen printed silicon solar cells by post treatments
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 2062-2065
Koller, S.; Mayrhofer, L.; Grifoni, M.:
Spin-dependent transport through interacting graphene armchair nanoribbons
In: New journal of physics. Online journal, Vol.12 (2010), No.3, Art.033038, 36 pp.
Korbel, S.; Marton, P.; Elsasser, C.:
Formation of vacancies and copper substitutionals in potassium sodium niobate under various processing conditions
In: Physical Review. B, Vol.81 (2010), No.17, Art. 174115
urn:nbn:de:0011-n-1367569
Körner, W.; Elsässer, C.:
First-principles density functional study of dopant elements at grain boundaries in ZnO
In: Physical Review. B, Vol.81 (2010), No.8, Art.085324, 12 pp.
urn:nbn:de:0011-n-1250590
Korres, S.; Dienwiebel, M.:
Design and construction of a novel tribometer with online topography and wear measurement
In: Review of scientific instruments, Vol.81 (2010), No.6, Art. 063904, 7 pp.
Kraft, T.; Schmidt, I.; Riedel, H.:
Simulation von pulvermetallurgischen Formgebungsverfahren
(Hagener Symposium Pulvermetallurgie <29, 2010, Hagen>)
In: Kolaska, H.: Formgebung: Chancen der Pulvermetallurgie: Vorträge und Ausstellerbeiträge des Hagener Symposiums am 25. und 26. November 2010 in Hagen. Hagen: Heimdall, 2010. (Pulvermetallurgie in Wissenschaft und Praxis 26), pp. 63-71
Krause, G.; Kraft, T.; Wonisch, A.; Meier, S.; Gemetz, F.; Weber, R.; Schwanke, D.; Lang, A.; Pohlner, J.; Pönisch, C.; Geng, J.:
Entwicklung und Anwendung numerischer Simulationsmethoden für den Siebdruck
In: Schwanke, D. (Ed.): Entwicklung nanotechnologischer Siebbeschichtungen und daran angepasster Pastensysteme für den Fine-Line-Druck von keramischen Schaltungsträgern: Ergebnisbericht des BMBF-Verbundprojekts "nanoSieb". Templin/Uckermark: Detert, 2010. (System integration in electronic packaging 12), Kap.3, pp. 41-63
Krause, G.; Kraft, T.; Wonisch, A.; Meier, S.; Gemetz, F.; Weber, R.; Schwanke, D.; Lang, A.; Pohlner, J.; Pönisch, C.; Geng, J.:
Entwicklung von Beschichtungsstrategien
In: Schwanke, D. (Ed.): Entwicklung nanotechnologischer Siebbeschichtungen und daran angepasster Pastensysteme für den Fine-Line-Druck von keramischen Schaltungsträgern: Ergebnisbericht des BMBF-Verbundprojekts "nanoSieb". Templin/Uckermark: Detert, 2010. (System integration in electronic packaging 12), Kap.5, pp. 73-80
Krause, M.; März, B.; Dresbach, C.; Petzold, M.:
Electron backscatter diffraction microstructure investigations of electronic materials down to the nanoscale
(Electronics System Integration Technology Conference (ESTC) <3, 2010, Berlin>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 3rd Electronics System Integration Technology Conference, ESTC 2010. Proceedings. Vol.1: Berlin, Germany, 13 - 16 September 2010. New York, NY: IEEE, 2010, pp. 319-325
Krause, M.; Klengel, R.; Cismak, A.; Petzold, M.; Altmann, F.:
Hochauflösende Metrologie für die Mikro-Nanointegration
(Workshop Mikro-Nano-Integration <2, 2010, Erfurt>)
In: VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik -GMM-: Mikro-Nano-Integration. CD-ROM: Beiträge des 2. GMM-Workshops. 3. - 4. März 2010 in Erfurt. Berlin: VDE-Verlag, 2010. (GMM-Fachbericht 63), pp. 100-103
Kumar-Krishnasamy, R.; Siegele, D.:
3D modelling of a multi pass dissimilar tube welding and post weld heat treatment of nickel based alloy and chromium steel
In: International journal of pressure vessels and piping, Vol.87 (2010), No.11, pp.643-649
urn:nbn:de:0011-n-1725925
Loeschner, K.; Seifert, G.; Heilmann, A.:
Self-organized, gratinglike nanostructures in polymer films with embedded metal nanoparticles induced by femtosecond laser irradiation
In: Journal of applied physics, Vol.108 (2010), No.7, Art. 073114, 10 pp.
Lubinsky, A.R.; Johnson, J.A.; Schweizer, S.; Weber, J.K.R.; Nishikawa, R.M.; Domenicali, P.; Fantone, S.D.:
Scanning translucent glass-ceramic x-ray storage phosphors
(Conference "Medical Imaging - Physics of Medical Imaging" <2010, San Diego/Calif.>)
In: Samei, E. (Ed.): Medical imaging 2010 - physics of medical imaging. Pt.3: 15 - 18 February 2010, San Diego, California, United States. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7622), Paper 76223W
Luke, M.; Varfolomeev, I.:
Ableitung von Inspektionsintervallen für Radsatzwellen auf Basis bruchmechanischer Methoden
(Deutscher Verband für Materialforschung und -prüfung (DVM-Tag) <2010, Berlin>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Die Eisenbahn und ihre Werkstoffe - neue Entwicklungen in der Bahntechnik: DVM-Tag 2010, 28.-30. April 2010, Berlin. Berlin: DVM, 2010. (DVM-Bericht 677), pp. 111-120
Luke, M.; Varfolomeev, I.; Lütkepohl, K.; Esderts, A.:
Fracture mechanics assessment of railway axles: Experimental characterization and computation
(European Conference on Fracture (ECF) <17, 2008, Brno>)
In: Dlouhý, I.: 17th European Conference on Fracture 2008: Held in Brno in September 2 - 5, 2008. Amsterdam: Elsevier, 2010. (Engineering failure analysis 17.2010, Nr.3), pp. 617-623
Markmann, J.; Bachurin, D.; Shao, L.; Gumbsch, P.; Weissmüller, J.:
Microstrain in nanocrystalline solids under load by virtual diffraction
In: epl. A letters journal exploring the frontiers of physics, Vol.89 (2010), No.6, Art. 66002, 6 pp.
urn:nbn:de:0011-n-1726128
Moras, G.; Ciacchi, L.C.; Elsässer, C.; Gumbsch, P.; Vita, A. de:
Atomically smooth stress-corrosion cleavage of a hydrogen-implanted crystal
In: Physical review letters, Vol.105 (2010), No.7, Art. 075502, 4 pp.
Moras, G.; Choudhury, R.; Kermode, J.R.; Csanyi, G.; Payne, M.C.; Vita, A. de:
Hybrid quantum/classical modeling of material systems: The "Learn on the Fly" molecular dynamics scheme
In: Dumictrica, T.: Trends in computational nanomechanics: Transcending length and time scales. Dordrecht: Springer, 2010. (Challenges and advances in computational chemistry and physics 9), pp. 1-23
Moseler, M.; Cervantes-Sodi, F.; Hofmann, S.; Csanyi, G.; Ferrari, A.C.:
Dynamic catalyst restructuring during carbon nanotube growth
In: ACS nano, Vol.4 (2010), No.12, pp.7587-7595
Moutanabbir, O.; Reiche, M.; Hähnel, A.; Erfurth, W.; Tarun, A.; Hayazawa, N.; Kawata, S.; Naumann, F.; Petzold, M.:
Strain stability in nanoscale patterned strained silicon-on-insulator
(Electrochemical Society (Meeting) <218, 2010, Las Vegas/Nev.>)
In: ECS transactions, Vol.33 (2010), No.6, pp.511-522
Mrovec, M.; Elsässer, C.; Gumbsch, P.:
Atomistic simulations of lattice defects in tungsten
In: Schade, P.: Selected papers of the 17th International Plansee Seminar 2009 in Reutte, Austria: was held May 25 - 29, 2009. Amsterdam: Elsevier, 2010. (International journal of refractory metals & hard materials 28.2010, Nr.6), pp. 698-702
urn:nbn:de:0011-n-1567344
Naumann, F.; Schriever, C.; Bohley, C.; Schilling, J.; Petzold, M.:
Numerische Analyse der Spannungsrelaxation nanostrukturierter sili-ziumbasierter optischer Wellenleiter zur Erzeugung nichtlinearer optischer Effekte
(Workshop Mikro-Nano-Integration <2, 2010, Erfurt>)
In: VDE/VDI-Gesellschaft Mikroelektronik, Mikro- und Feinwerktechnik -GMM-: Mikro-Nano-Integration. CD-ROM: Beiträge des 2. GMM-Workshops. 3. - 4. März 2010 in Erfurt. Berlin: VDE-Verlag, 2010. (GMM-Fachbericht 63), pp. 93-96
Naumann, V.; Werner, M.; Swatek, S.; Hagendorf, C.:
Defect diagnostics for cadmium telluride thin film solar cells
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 378-380
Neuber, M.; Cismak, A.; Heilmann, A.:
Cryo-FIB-preparation and cryo-SEM investigation of gold nanolayers used as absorber for laser welding of polymer foils
(Conference Layered Nanostructures <2009, Wittenberg>)
In: Michler, G.H.: Layered nanostructures - polymers with improved properties: Selected contributions from the conference in Wittenberg (Germany), May 12 - 13, 2009; 13th Symposium "Electron Microscopy in Materials Science". Weinheim: Wiley-VCH, 2010. (Macromolecular symposia 294.2010, Nr.1), pp. 11-18
Nötzold, K.; Dresbach, C.; Graf, J.; Böttge, B.:
Temperature dependent fracture toughness of glass frit bonding layers
(Symposium on Design, Test, Integration and Packaging of MEMS, MOEMS (DTIP) <2009, Rome>)
In: Courtois, B.: Special issue on design, test, integration and packaging of MEMS/MOEMS 2009: The Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP) was held in Rome, Italy, 1 - 3 April 2009. Berlin: Springer, 2010. (Microsystem technologies 16.2010, Nr.7), pp. 1243-1249
Oswald, M.; Turek, M.; Bagdahn, J.:
Numerical simulations of thermo-mechanical stresses during the casting of multi-crystalline silicon ingots
(International Conference on Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE) <11, 2010, Bordeaux>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 11th international thermal, mechanical & multi-physics simulation, and experiments in microelectronics and microsystems, EuroSimE 2010: Bordeaux / France; 26.-28.04.2010. Piscataway/NJ: IEEE, 2010, 5 pp.
Otto, M.; Kroll, M.; Käsebier, T.; Lee, S.-M.; Putkonen, M.; Salzer, R.; Miclea, P.T.; Wehrspohn, R.B.:
Conformal transparent conducting oxides on black silicon
In: Advanced Materials, Vol.22 (2010), No.44, pp.5035-5038
Paßlick, C.; Csaszar, I.; Henke, B.; Schweizer, S.; Ahrens, B.; Miclea, P.-T.; Johnson, J.A.:
Advances in up- and down-converted fluorescence for high efficiency solar cells using rare-earth doped fluorozirconate-based glasses and glass ceramics
(Conference "Optics and Photonics" <2010, San Diego/Calif.>)
In: Tsakalakos, T.: Next generation (nano) photonic and cell technologies for solar energy conversion: 1 - 4 August 2010, San Diego, California, United States. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7772), Paper 7772 0A
Pastewka, L.; Moser, S.; Moseler, M.:
Atomistic Insights into the Running-in, Lubrication, and Failure of Hydrogenated Diamond-Like Carbon Coatings
In: Tribology letters, Vol.39 (2010), No.1, pp.49-61
Pastewka, L.; Peguiron, J.; Gumbsch, P.; Moseler, M.:
Molecular dynamics simulation of gold solid film lubrication
In: International journal of materials research, Vol.101 (2010), No.8, pp.981-988
Paul, H.; Luke, M.:
Langfaserverstärkte Kunststoff-Metall-Hybridverbunde
In: Konstruktion, (2010), No.9, pp.IW11-IW12
Paxton, A.T.; Elsässer, C.:
Electronic structure and total energy of interstitial hydrogen in iron: Tight-binding models
In: Physical Review. B, Vol.82 (2010), No.23, Art. 235125, 15 pp.
Petzold, M.; Altmann, F.; Krause, M.; Salzer, R.; Schmidt, C.; Martens, S.; Mack, W.; Dömer, H.; Nowodzinski, A.:
Micro structure analysis for system in package components - novel tools for fault isolation, target preparation, and high-resolution material diagnostics
(Electronic Components and Technology Conference (ECTC) <60, 2010, Las Vegas/Nev.>)
In: IEEE Components, Packaging, and Manufacturing Technology Society: 60th Electronic Components and Technology Conference, ECTC 2010. Proceedings. Part 2: 1-4 June 2010, Las Vegas, NV, USA. New York, NY: IEEE, 2010, pp. 1296-1302
urn:nbn:de:0011-n-1725964
Pfau, C.; Miclea, P.-T.; Bohley, C.; Schweizer, S.:
Phonon spectra of barium halide nanocrystals in fluorozirconate glasses
(Europhysical Conference on Defects in Insulating Materials (EURODIM) <11, 2010, Pécs>)
In: IOP conference series. Materials science and engineering, Vol.15 (2010), No.1, Art. 012021
Pfeiffer, W.; Wenzel, J.:
Shot peening of brittle materials - status and outlook
(International Conference on Processing & Manufacturing of Advanced Materials (THERMEC) <6, 2009, Berlin>)
In: Chandra, T. et al.: THERMEC 2009, 6th International Conference on Processing & Manufacturing of Advanced Materials. Pt.1: Berlin, Germany, August 25 - 29, 2009. Stafa-Zürich: Trans Tech Publications, 2010. (Materials Science Forum 638-642), pp. 799-804
urn:nbn:de:0011-n-1322591
Pippan, R.; Gumbsch, P.:
Multiscale modelling of plasticity and fracture by means of dislocation mechanics
Wien: Springer, 2010
(International Centre for Mechanical Sciences. Courses and lectures 522)
ISBN 978-3-7091-0282-4
ISBN 978-3-7091-0283-1
Preußner, J.; Fleischmann, E.; Völkl, R.; Glatzel, U.:
Enrichment of boron at grain boundaries of platinum-based alloys determined by electron energy loss spectroscopy in a transmission electron microscope
In: International journal of materials research, Vol.101 (2010), No.5, pp.577-579
Pyttel, B.; Varfolomeev, I.; Siegele, D.; Berger, C.:
FKM-guideline fracture mechanics proof of strength for engineering components - procedures, compendiums, examples
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010, Paper 77; 8 pp.
Reisacher, E.; Buck, H.:
Verfahren und Vorrichtung zur Oberflächenbehandlung eines Objektes
2010
Reissig, L.:
Nutzen ziehen aus Schadensfällen
In: Konstruktion, (2010), No.6, pp.IW10-IW11
Ripoll, M.R.; Weygand, S.M.; Riedel, H.:
Reduction of tensile residual stresses during the drawing process of tungsten wires
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.527 (2010), No.13-14, pp.3064-3072
Salzer, R.; Graff, A.; Simon, M.; Altmann, F.:
Quantitative assessment of TEM-sample warping caused by FIB preparation
(Microscopy and Microanalysis <2010, Portland>)
In: Microscopy and microanalysis, Vol.16 (2010), S2, pp.172-173
Sander, M.; Henke, B.; Schweizer, S.; Ebert, M.; Bagdahn, J.:
Characterization of PV Modules by Combination of Mechanical and Electrical Analysis Methods
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 3993-3997
Sandfeld, S.; Hochrainer, T.; Zaiser, M.:
Application of a 3D-continuum theory of dislocations to a problems of constrained plastic flow: Microbending of a thin film
(Symposium FF "Mechanical Behavior of Nanomaterials - Experiments and Modeling" <2009, Boston/Mass.>)
In: Lou, J.: Mechanical behavior at small scales - experiments and modeling: Symposium held November 30 - December 3, Boston, Massachusetts, U.S.A.; Symposia FF: "Mechanical Behavior of Nanomaterials - Experiments and Modeling" and GG: "Plasticity in Confined Volumes - Modeling and Experiments" at the 2009 MRS fall meeting. Warrendale, Pa.: MRS, 2010. (Materials Research Society Symposium Proceedings 1224), pp. 143-148
Sandfeld, S.; Hochrainer, T.; Gumbsch, P.; Zaiser, M.:
Numerical implementation of a 3D continuum theory of dislocation dynamics and application to micro-bending
In: The philosophical magazine, Vol.90 (2010), No.27-28, pp.3697-3728
urn:nbn:de:0011-n-1427834
Scherge, M.; Meier, S.; Blug, B.:
Kann DLC wirklich Reibung minimieren?
(Fachtagung Ventiltrieb und Zylinderkopf <4, 2010, Würzburg>)
In: VDI-Gesellschaft Werkstofftechnik: Ventiltrieb und Zylinderkopf 2010. 4. VDI-Fachtagung: Würzburg, 22. und 23. November 2010. Düsseldorf: VDI-Verlag, 2010. (VDI-Berichte 2115), pp. 97-106
Scherge, M.; Dienwiebel, M.:
Levers of tribological optimization
(International Colloquium Tribology <17, 2010, Ostfildern>)
In: Bartz, W.J.: Solving Friction and Wear Problems. 17th International Colloquium Tribology 2010. Book of Synopses: 19-21 January 2010, Ostfildern, Germany. Ostfildern: TAE, 2010, pp. 13
Scherm, F.; Völkl, R.; Neubrand, A.; Bosbach, F.; Glatzel, U.:
Mechanical characterisation of interpenetrating network metal-ceramic composites
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.527 (2010), No.4-5, pp.1260-1265
urn:nbn:de:0011-n-1187801
Schlesinger, M.; Seifert, T.; Möser, M.; Riedel, H.:
LCF- und TMF-Versuche mit kraftwerkstypisch niedrigen Belastungsraten zur Charakterisierung von Nickelbasislegierungen
(Tagung Werkstoffprüfung <2010, Neu-Ulm>)
In: Pohl, M.: Tagung Werkstoffprüfung 2010. Konstruktion, Werkstoffentwicklung und Schadensanalyse: 02. und 03. Dezamber 2010 in Neu-Ulm. Düsseldorf: Stahleisen, 2010, pp. 113-118
Schmidt, C.; Große, C.; Altmann, F.; Schulz, J.; Seibt, A.:
Application of lock-in thermography for backside failure localization using solid immersion lenses
(International Symposium for Testing and Failure Analysis (ISTFA) <36, 2010, Dallas/Tex.>)
In: Electronic Device Failure Analysis Society -EDFAS-, Materials Park/Ohio: ISTFA 2010, 36th International Symposium for Testing and Failure Analysis. Conference Proceedings: November 14 - 18, 2010, InterContinental Hotel Dallas, [Addison], Dallas, Texas, USA. Materials Park, Ohio: ASM International, 2010, pp. 378-383
Schmidt, I.:
Effective viscous sintering parameters for heterogeneous plate-like structures using numerical homogenisation
(Gesellschaft für Angewandte Mathematik und Mechanik GAMM (Jahrestagung) <81, 2010, Karlsruhe>)
In: Proceedings in applied mathematics and mechanics. PAMM, Vol.10 (2010), 1, pp.421-422
Schmidt, I.; Kraft, T.:
Simulation of the co-sintering of composite structures
In: International journal of materials research, Vol.101 (2010), No.8, pp.933-941
Schmidt, I.; Trondl, A.; Kraft, T.; Wonisch, A.:
Simulation of the material behaviour of metal powder during compaction
In: Proceedings of the Institution of Mechanical Engineers. Part E, Journal of process mechanical engineering, Vol.224 (2010), No.3, pp.187-194
Schmitt, W.; Butz, A.; Rist, T.:
Kontinuumsmechanische Simulation von Steckverbinder-Elementen
In: Metall, Vol.64 (2010), No.11, pp.419-420
Schoenfelder, S.; Oswald, M.; Fischer, C.; Zühlke, H.-U.; Berbig, C.; Geppert, T.; Wütherich, T.; Krokoszinski, H.-J.; Bagdahn, J.:
Investigations of laser and design parameters of via holes on mechanical strength of metal wrap through solar cells
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 2578-2583
Schriever, C.; Bohley, C.; Wehrspohn, R.B.:
Strain dependence of second-harmonic generation in silicon
In: Optics Letters, Vol.35 (2010), No.3, pp.273-275
Schriever, C.; Bohley, C.; Schilling, J.; Wehrspohn, R.B.:
Strain dependence of second-harmonic generation in silicon
(Conference "Silicon Photonics and Photonic Integrated Circuits" <2, 2010, Brussels>)
In: Righini, G.C.: Silicon photonics and photonic integrated circuits II: 12 - 16 April 2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7719), Paper 77190Z
Schweizer, C.; Seifert, T.; Nieweg, B.; Hartrott, P. von; Riedel, H.:
Mechanisms and modelling of fatigue crack growth under combined low and high cycle fatigue loading
In: International journal of fatigue, Vol.33 (2010), No.2, pp.194-202
Schweizer, C.; Seifert, T.; Riedel, H.:
Simulation of fatigue crack growth under large scale yielding conditions
(International Conference on the Strength of Materials (ICSMA) <15, 2009, Dresden>)
In: Skrotzki, W.: 15th International Conference on the Strength of Materials, ICSMA 2009: Dresden, Germany, 16 - 21 August 2009. Red Hook, NY: Curran, 2010. (Journal of physics. Conference series 240), pp. 198-201 (Art. 012043)
Schweizer, S.; Henke, B.; Miclea, P.-T.; Ahrens, B.; Johnson, J.A.:
Multi-functionality of fluorescent nanocrystals in glass ceramics
In: Radiation measurements, Vol.45 (2010), 3-6, pp.485-489
Schweizer, S.; Henke, B.; Ahrens, B.; Paßlick, C.; Miclea, P.T.; Wenzel, J.; Reisacher, E.; Pfeiffer, W.; Johnson, J.A.:
Progress on up- and down-converted fluorescence in rare-doped fluorozirconate-based glass ceramics for high efficiency solar cells
(Conference "Photonics for Solar Energy Systems" <3, 2010, Brussels>)
In: Wehrspohn, R.B.: Photonics for Solar Energy Systems III: 13.-15.4.2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7725), Paper 77250X
urn:nbn:de:0011-n-1726057
Schweizer, S.; Henke, B.; Császár, I.; Paßlick, C.; Ahrens, B.; Miclea, P.-T.; Johnson, J.A.:
Rare-earth doped fluorozirconate-based glass ceramics for high efficiency solar cells: recent developments
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <25, 2010, Valencia>)
In: European Commission: 25th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2010. Proceedings: 5th World Conference on Photovoltaic Energy Conversion, 6-10 , September 2010, Valencia, Spain. München: WIP-Renewable Energies, 2010, pp. 47-51
Schweizer, S.L.; Rhein, A. von; Geppert, T.M.; Wehrspohn, R.B.:
Reduced pore diameter fluctuations of macroporous silicon fabricated from neutron-transmutation-doped material
In: Physica status solidi. Rapid research letters, Vol.4 (2010), No.7, pp.148-150
Seifert, T.; Riedel, H.:
Mechanism-based thermomechanical fatigue life prediction of cast iron. Part I: Models
In: International journal of fatigue, Vol.32 (2010), No.8, pp.1358-1367
Seifert, T.; Maier, G.; Uihlein, A.; Lang, K.H.; Riedel, H.:
Mechanism-based thermomechanical fatigue life prediction of cast iron. Part II: Comparison of model predictions with experiments
In: International journal of fatigue, Vol.32 (2010), No.8, pp.1368-1377
urn:nbn:de:0011-n-1367368
Seifert, T.; Schweizer, C.; Schlesinger, M.; Möser, M.; Eibl, M.:
Thermomechanical fatigue of 1.4849 cast steel - experiments and life prediction using a fracture mechanics approach
In: International journal of materials research, Vol.101 (2010), No.8, pp.942-950
Senger, J.; Weygand, D.; Motz, C.; Gumbsch, P.; Kraft, O.:
Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions
In: The philosophical magazine, Vol.90 (2010), No.5, pp.617-628
urn:nbn:de:0011-n-1251271
Siegele, D.; Varfolomeev, I.; Pyttel, B.:
Bruchmechanische Fehlerbewertung mit Hilfe der FKM-Richtlinie - Fallbeispiele aus der industriellen Praxis
(Tagung "Neue Entwicklungen für die Bauteilfestigkeitsnachweise" <2010, Darmstadt>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Neue Entwicklungen für die Bauteilfestigkeitsnachweise: Themenschwerpunkte: Festigkeit von Magnesiumbauteilen, Grundlagen und Anwendungen der FKM Festigkeitsrichtlinien ; Vorträge, 16. + 17. Juni 2010. Berlin: DVM, 2010. (DVM-Bericht 803), pp. 211-220
Siegele, D.; Varfolomeev, I.; Hohe, J.; Hardenacke, V.; Nagel, G.:
Integrity assessment of a German PWR RPV considering loss of constraint
(Pressure Vessels and Piping Conference <2010, Bellevue/Wash.>)
In: Wiersma, B.J. (Ed.): Proceedings of the ASME Pressure Vessels and Piping Conference 2010. Vol. 6, Part A: presented at ASME 2010 Pressure Vessels and Piping Division/K-PVP conference; July 18 - 22, 2010, Bellevue, Washington, USA. New York/NY.: ASME, 2010, pp. 153-160
Siegele, D.; Brand, M.; Varfolomeev, I.; Hohe, J.:
Numerical analyses of residual stress fields in welded components
(Pressure Vessels and Piping Conference (PVP) <2009, Prague>)
In: Rudland, D.L.: ASME Pressure Vessels and Piping Conference 2009. Proceedings. Vol. 6: Materials and fabrication. Part A: Presented at 2009 ASME Pressure Vessels and Piping Conference, July 26 - 30, 2009, Prague, Czech Republic. New York/NY.: ASME, 2010, pp. 347-352
Sivakov, V.A.; Bronstrup, G.; Pecz, B.; Berger, A.; Radnoczi, G.Z.; Krause, M.; Christiansen, S.H.:
Realization of vertical and zigzag single crystalline silicon nanowire architectures
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.114 (2010), No.9, pp.3798-3803
Sommer, S.:
Fracture modeling of spot welds and rivets for crash simulation
(Simulation of Connections and Joints in Structures <2010, Wiesbaden>)
In: International Association for the Engineering Analysis Community -NAFEMS-: Simulation of Connections and Joints in Structures. NAFEMS Seminar: 28th - 29th April 2010, Wiesbaden, Germany. East Kilbride, Glasgow: NAFEMS, 2010, pp. 9/1-12
Sommer, S.:
Modeling of the fracture behavior of spot welds using advanced micro-mechanical damage models
(World Congress on Computational Mechanics (WCCM) <9, 2010, Sydney>)
In: IOP conference series. Materials science and engineering, Vol.10 (2010), No.1, Art.012057
Sommer, S.; Andrieux, F.; Blauel, J.G.:
Schädigungssimulation und Crashversuche an druckgegossenen Magnesiumbauteilen
(Tagung "Neue Entwicklungen für die Bauteilfestigkeitsnachweise" <2010, Darmstadt>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Neue Entwicklungen für die Bauteilfestigkeitsnachweise: Themenschwerpunkte: Festigkeit von Magnesiumbauteilen, Grundlagen und Anwendungen der FKM Festigkeitsrichtlinien ; Vorträge, 16. + 17. Juni 2010. Berlin: DVM, 2010. (DVM-Bericht 803), pp. 75-84
Sommer, S.; Andrieux, F.; Memhard, D.:
Versagensmodellierung von Fügeverbindungen in der Crashsimulation
(SIMVEC Berechnung und Simulation im Fahrzeugbau <15, 2010, Baden-Baden>)
In: VDI-Gesellschaft Fahrzeug- und Verkehrstechnik: Berechnung und Simulation im Fahrzeugbau 2010: 15. Kongress, Baden-Baden, 16. und 17. November 2010. Düsseldorf: VDI Verlag, 2010. (VDI-Berichte 2107), pp. 183-201
Standke, G.; Müller, T.; Neubrand, A.; Weise, J.; Göpfert, M.:
Cost-efficient metal-ceramic composites - novel foam-preforms, casting processes and characterisation
In: Advanced engineering materials, Vol.12 (2010), No.3, pp.189-196
urn:nbn:de:0011-n-1323080
Stiele, H.; Brand, M.; Asperheim, J.-I.:
Unterstützung der Prozessentwicklung des induktiven Randschichthärtens großer Lagerringe durch Simulation
In: Elektrowärme international, (2010), No.3, pp.203-206
Svoboda, J.; Maier, G.:
Modeling of formation of precipitate-free zone
In: International journal of materials research, Vol.101 (2010), No.8, pp.997-1002
Szyszka, B.; Löbmann, P.; Georg, A.; May, C.; Elsässer, C.:
Development of new transparent conductors and device applications utilizing a multidisciplinary approach
(International Symposium on Transparent Oxide Thin Films for Electronics and Optics (TOEO) <6, 2009, Tokyo>)
In: Thin solid films, Vol.518 (2010), No.11, pp.3109-3114
Üpping, J.; Bielawny, A.; Ulbrich, C.; Peters, M.; Goldschmidt, J.C.; Steidl, L.; Zentel, R.; Beckers, T.; Lambertz, A.; Carius, R.; Rau, U.; Wehrspohn, R.B.:
3D photonic crystals for photon management in solar cells
(Active Photonic Materials Conference <3, 2010, San Diego/Calif.>)
In: Subramania, G.S.: Active photonic materials III: 2 - 5 August 2010, San Diego, California, United States. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7756), Paper 77560A
Üpping, J.; Ulbricht, C.; Helgert, C.; Peters, M.; Steidl, L.; Zentel, R.; Pertsch, T.; Rau, U.; Wehrspohn, R.B.:
Inverted-opal photonic crystals for ultra light-trapping in solar cells
(Conference "Photonics for Solar Energy Systems" <3, 2010, Brussels>)
In: Wehrspohn, R.B.: Photonics for Solar Energy Systems III: 13.-15.4.2010, Brussels, Belgium. Bellingham, WA: SPIE, 2010. (Proceedings of SPIE 7725), Paper 772519
Varfolomeev, I.; Luke, M.; Burdack, M.:
Bewertung von Rissinitiierung und Rissfortschrittsverhalten in Presssitzen von Radsatzwellen
(Tagung Werkstoffprüfung <2010, Neu-Ulm>)
In: Pohl, M.: Tagung Werkstoffprüfung 2010. Konstruktion, Werkstoffentwicklung und Schadensanalyse: 02. und 03. Dezamber 2010 in Neu-Ulm. Düsseldorf: Stahleisen, 2010, pp. 229-234
Varfolomeev, I.; Luke, M.; Ivanov, I.:
Effect of press fit conditions on crack propagation behaviour in railway axles
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010, Paper 705
Varfolomeev, I.; Luke, M.; Moroz, S.:
Experimental and numerical investigations of fatigue crack growth in various specimen geometries
(International Fatigue Congress <10, 2010, Prague>)
In: Lukas, P.: Fatigue 2010. 10th International Fatigue Congress. CD-ROM: June 6 - 11, Prague, Czech Republic. Amsterdam: Elsevier, 2010. (Procedia engineering 2.2010, Nr.1), pp. 1829-1837
Varfolomeev, I.; Luke, M.; Moroz, S.; Burdack, M.:
Experimental and numerical study of fatigue crack growth behaviour in the threshold range
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010, Paper 519
Varfolomeev, I.; Ivanov, D.; Siegele, D.; Nagel, G.:
Probabilistic leak-before-break assessment of a main coolant line
(Pressure Vessels and Piping Conference <2010, Bellevue/Wash.>)
In: Bajwa, C.S.: ASME Pressure Vessels and Piping Conference 2010. Proceedings. Vol.7: Operations, applications and components: Presented at ASME 2010 Pressure Vessels and Piping Division/K-PVP conference; July 18 - 22, 2010, Bellevue, Washington, USA. New York/NY.: ASME, 2010, pp. 371-378
Varfolomeev, I.; Luke, M.; Moroz, S.; Burdack, M.:
Vergleichende Analysen zum zyklischen Rissfortschrittsverhalten im schwellenwertnahen Bereich
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <42, 2010, Paderborn>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Bruchmechanische Werkstoff- und Bauteilbewertung. Beanspruchungsanalyse, Prüfmethoden und Anwendungen. CD-ROM: 42. Tagung des DVM-Arbeitskreises Bruchvorgänge, 23. + 24. Februar 2010, Paderborn. Berlin: DVM, 2010. (DVM-Bericht 242), pp. 41-50
Vormwald, M.; Versch, C.; Siegele, D.; Leis, P.:
Weiterentwicklung des statischen Festigkeitsnachweises
(Tagung "Neue Entwicklungen für die Bauteilfestigkeitsnachweise" <2010, Darmstadt>)
In: Deutscher Verband für Materialforschung und -prüfung e.V. -DVM-, Berlin: Neue Entwicklungen für die Bauteilfestigkeitsnachweise: Themenschwerpunkte: Festigkeit von Magnesiumbauteilen, Grundlagen und Anwendungen der FKM Festigkeitsrichtlinien ; Vorträge, 16. + 17. Juni 2010. Berlin: DVM, 2010. (DVM-Bericht 803), pp. 115-138
Walter, M.; Moseler, M.:
Determination of structure and electronic properties of free, supported and ligand protected metal clusters by density functional theory
(John von Neumann Institut für Computing (NIC-Symposium) <5, 2010, Jülich>)
In: Münster, G.: NIC Symposium 2010. Proceedings: 24 - 25 February 2010 Jülich, Germany. Jülich: Forschungszentrum Jülich, 2010. (Schriften des Forschungszentrums Jülich, IAS Series 3), pp. 199-206
Walter, M.; Moseler, M.:
How to observe the oxidation of magnesia-supported Pd clusters by scanning tunnelling microscopy
In: Physica status solidi. B, Vol.247 (2010), No.5, pp.1016-1022
Weickmann, H.; Gurr, M.; Meincke, O.; Thomann, R.; Mülhaupt, R.:
A versatile solvent-free "one-pot" route to polymer nanocomposites and the in situ formation of calcium phosphate/layered silicate hybrid nanoparticles
In: Advanced Functional Materials, Vol.20 (2010), 11, pp.1778-1786
Winzer, N.; Xu, P.; Bender, S.; Cross, C.E.:
Stress corrosion cracking of gas-Tungsten arc welds in AZ31 magnesium alloy
(European Conference on Fracture (ECF) <18, 2010, Dresden>)
In: Bundesanstalt für Materialforschung und -prüfung -BAM-, Berlin: ECF 2010, 18th European Conference on Fracture. CD-ROM: Fracture of Materials and Fractures from Micro to Macro Scale, 30.08.-03.09.2010, Dresden. Dresden, 2010
Ziegler, T.; Neubrand, A.; Piat, R.:
Multiscale homogenization models for the elastic behaviour of metal/ceramic composites with lamellar domains
In: Composites science and technology, Vol.70 (2010), No.4, pp.664-670
urn:nbn:de:0011-n-1332111
Zimmermann, J.; Ciacchi, L.C.:
Mechanisms of initial oxidation of the Co(0001) and Cr(110) surfaces
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.114 (2010), No.14, pp.6614-6623
Zimmermann, J.; Ciacchi, L.C.:
Origin of the selective Cr oxidation in CoCr alloy surfaces
In: The journal of physical chemistry letters. Online journal, Vol.1 (2010), No.15, pp.2343-2348