Ahrens, B.; Miclea, P.T.; Schweizer, S.:
Upconverted fluorescence in Nd3+- doped barium chloride single crystals
In: Journal of Physics. Condensed Matter, Vol.21 (2009), No.12, Art. 125501, 5 pp.
Andrieux, F.; Memhard, D.; Sun, D.-Z.:
Development and verification of a material model for adhesives under crash loading
(International Symposium on Plasticity and its Current Applications <15, 2009, St.Thomas>)
In: Khan, A.S.: Macro-to-nano-scale inelastic of materials, plasticity, fatigue & fracture. The 15th International Symposium on Plasticity & its Current Applications. CD-ROM: Jan. 3 - 8, 2009, St. Thomas, U. S. Virgin Island. Fulton, Md.: NEAT Press, 2009
Autenrieth, H.; Weber, M.; Schulze, V.; Gumbsch, P.:
Investigation of Process-Specific Size Effects by 3D-FE-Simulations
In: Nagel, W.E.: High Performance Computing in Science and Engineering '08: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2008. Berlin: Springer, 2009, pp. 543-558
Bako, B.; Samaras, M.; Weygand, D.; Chen, J.; Gumbsch, P.; Hoffelner, W.:
The influence of Helium bubbles on the critical resolved shear stress of dispersion strengthened alloys
(International Conference on Fusion Reactor Materials <13, 2007, Nice>)
In: Journal of nuclear materials, Vol.386-388 (2009), pp.112-114
Baumgartner, K.; Angelov, O.; Sendova-Vassileva, M.; Holländer, B.; Ahrens, B.; Schweizer, S.; Dimova-Malinovska, D.; Carius, R.:
Optical properties of magnetron sputtered thin dielectric films containing terbium(III) for spectral conversion in thin film solar cells
(European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <24, 2009, Hamburg>)
In: Sinke, W.: 24th European Photovoltaic Solar Energy Conference 2009. CD-ROM: The compiled State-of-the-Art of PV Solar Technology and Deployment. Proceedings of the International Conference held in Hamburg, 21-25 September 2009. München, 2009, pp. 354-358
Berlet, P.; Dienwiebel, M.; Kehrwald, M.; Scherge, M.:
Eine neue Methode zur Verringerung von Reibung und Verschleiß durch optimierte spanende Endbearbeitung
(Tribologie-Fachtagung <50, 2009, Göttingen>)
In: Gesellschaft für Tribologie, Moers: Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Bd.1: 50. Tribologie-Fachtagung; 21. bis 23. September 2009 in Göttingen. Aachen: GfT, 2009, pp. 49/1-49/10
Bernhardt, T.M.; Hagen, J.; Lang, S.M.; Popolan, D.M.; Socaciu-Siebert, L.D.; Wöste, L.:
Binding energies of O2 and CO to small gold, silver, and binary silver-gold cluster anions from temperature dependent reaction kinetics measurements
In: Journal of physical chemistry. A, Vol.113 (2009), No.12, pp.2724-2733
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.:
Three-dimensional discrete element models for the granular statics and dynamics of powders in cavity filling
In: Journal of the Mechanics and Physics of Solids, Vol.57 (2009), No.1, pp.10-31
urn:nbn:de:0011-n-892953
Bierwisch, C.; Kraft, T.; Riedel, H.; Moseler, M.:
Die filling optimization using three-dimensional discrete element modeling
In: Powder Technology, Vol.196 (2009), No.2, pp.169-179
urn:nbn:de:0011-n-1113691
Bierwisch, C.; Moseler, M.; Kraft, T.; Riedel, H.:
Verfahren und Vorrichtung zur Homogenisierung einer Pulverschuettung bei der Herstellung von Pulverpresslingen
2009
Blug, A.; Blug, B.:
Regelvorrichtung
2009
Blug, B.; Hörner, M.; Meier, S.:
Einfluss der Rauheit auf das Verschleißverhalten von DLC-Schichten
(Tribologie-Fachtagung <50, 2009, Göttingen>)
In: Gesellschaft für Tribologie, Moers: Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Bd.2: 50. Tribologie-Fachtagung ; 21. bis 23. September 2009 in Göttingen; Werkstoffe und Werkstofftechnologien, dünne Schichten und Oberflächentechnologien, Maschinenelemente und Antriebstechnik, Fahrzeugtechnik. Aachen: GfT, 2009, pp. 53/1-53/12
Brand, M.; Luke, M.:
Automatische Anpassung des Wärmeeintrags zur vereinfachten Temperaturfeldberechnung
(SYSWELD Forum <2009, Weimar>)
In: Hildebrand, J. (Ed.): SYSWELD Forum 2009. Tagungsband: 22. - 23. Oktober 2009, Weimar. Weimar: Univ.-Verl., 2009, pp. 172-177
Brand, M.; Luke, M.; Hohe, J.:
Reduzierung von Rechenzeiten in Mechanikberechnungen unter Berücksichtigung von instationären und quasi-stationären Temperaturfeldern beim Schweißen
(SYSWELD Forum <2009, Weimar>)
In: Hildebrand, J. (Ed.): SYSWELD Forum 2009. Tagungsband: 22. - 23. Oktober 2009, Weimar. Weimar: Univ.-Verl., 2009, pp. 54-61
Bräuer, M.; Weygand, D.; Gumbsch, P.; Hoffmann, M.J.:
Grain growth anomaly in strontium titanate
In: Scripta materialia, Vol.61 (2009), No.6, pp.584-587
Burmeister, F.; Hagen, J.:
NanoSkin: Beständige Nanostrukturen im Visier
In: Kunststoffberater, Vol.54 (2009), pp.33-36
Burmeister, F.; Hagen, J.; Denter, J.; Wirth, M.; Fromm, A.; Kleer, G.:
Hybrid inorganic-organic functional coatings for injection molding applications
(International Conference on Plasma Surface Engineering (PSE) <11, 2008, Garmisch-Partenkirchen>)
In: Plasma Processes and Polymers, Vol.6 (2009), Supplement 1, pp.S1-S5
Cheng, Y.; Weygand, D.; Gumbsch, P.:
Simulation of small-angle tilt grain boundaries and their response to stress
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 783-787
Demiray, S.; Becker, W.; Hohe, J.:
Investigation of the fatigue behavior of open cell foams by a micromechanical 3-D model
In: Materials Science and Engineering, A. Structural materials, properties, microstructure and processing, Vol.504 (2009), No.1-2, pp.141-149
Denter, J.; Hagen, J.; Burmeister, F.; Fromm, A.:
Formwerkzeug und Verfahren zu seiner Verwendung
2009
Derlet, P.M.; Gumbsch, P.; Hoagland, R.; Li, J.; McDowell, D.L.; Swygenhoven, H. van; Wang, J.:
Atomistic simulations of dislocations in confined volumes
In: MRS Bulletin, Vol.34 (2009), No.3, pp.184-189
Dudarev, S.L.; Boutard, J.-L.; Lässer, R.; Caturla, M.J.; Derlet, P.M.; Fivel, M.; Fu, C.-C.; Lavrentiev, M.Y.; Malerba, L.; Mrovec, M.; Nguyen-Manh, D.; Nordlund, K.; Perlado, M.; Schäublin, R.; Swygenhoven, H. van; Terentyev, D.; Wallenius, J.; Weygand, D.; Willaime, F.:
The EU programme for modelling radiation effects in fusion reactor materials: An overview of recent advances and future goals
(International Conference on Fusion Reactor Materials <13, 2007, Nice>)
In: Journal of nuclear materials, Vol.386-388 (2009), pp.1-7
urn:nbn:de:0011-n-960306
Eisenlohr, P.; Tjahjanto, D.D.; Hochrainer, T.; Roters, F.; Raabe, D.:
Comparison of texture evolution in fcc metals predicted by various grain cluster homogenization schemes
In: International journal of materials research, Vol.100 (2009), No.4, pp.500-509
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer-Institut für Werkstoffmechanik. Jahresbericht 2008
Freiburg/Brsg.: Fraunhofer IWM, 2009
urn:nbn:de:0011-n-931293
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2009/1
Freiburg/Brsg.: Fraunhofer IWM, 2009
urn:nbn:de:0011-n-1160632
Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Fraunhofer IWM Report. Ausgabe 2009/2
Freiburg/Brsg.: Fraunhofer IWM, 2009
urn:nbn:de:0011-n-1160657
Friedmann, V.; Siegele, D.:
Damage behaviour of Nickel-based transition welds under cyclic thermomechanical loading
(Creep Conference <2, 2009, Zürich>)
In: Shibli, I.A.: Creep & fracture in high temperature components. Design & life assessment issues: Proceedings; April 21-23, 2009, Zurich, Switzerland / ECCC Creep Conference. Lancaster, Pa.: DEStech Publications, 2009, pp. 515-527
Gall, M.; Thielicke, B.:
Influence of cyclic loading and temperature on integrity of piezoceramic patch transducers
(Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) <1, 2008, Ellicott City/Md.>)
In: American Society of Mechanical Engineers -ASME-: First ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems 2008. Proceedings. Vol.1: Multifunctional materials, active materials, mechanics and behavior, enabling technologies and integrated system design: October 28-30, 2008, Ellicott City, MD, USA. New York/NY.: ASME, 2009, pp. 197-208
Gall, M.; Thielicke, B.; Schmidt, I.:
Integrity of piezoceramic patch transducers under cyclic loading at different temperatures
(Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) <1, 2008, Ellicott City/Md.>)
In: Lynch, C.: Adaptive and active materials. Selected papers from the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2008: Maryland, USA, 28 - 30 October 2008. Bristol: IOP Publishing, 2009. (Smart materials and structures 18.2009, Nr.10), Art. 104009, 10 pp.
urn:nbn:de:0011-n-1076900
Gall, M.:
Development of a peristaltic micro pump system - technical realisation
(Adaptronic Congress <13, 2009, Berlin>)
In: ERAS GmbH: Adaptronic Congress 2009. Conference proceedings: 19 - 20 May 2009 in Berlin. Göttingen: Adaptronic Congress Veranstaltungs GbR, 2009, pp. 179-183
Gall, M.:
Development of a peristaltic micro pump system - conceptual design and optimization by simulation
(Adaptronic Congress <13, 2009, Berlin>)
In: ERAS GmbH: Adaptronic Congress 2009. Conference proceedings: 19 - 20 May 2009 in Berlin. Göttingen: Adaptronic Congress Veranstaltungs GbR, 2009, pp. 169-177
Gemetz, F.; Meier, S.:
Erhöhung der Lebensdauer und Zuverlässigkeit von Lagerbauteilen: Kunststoffbeschichtung mit DLC
In: Konstruktion, (2009), No.6, pp.IW9-IW10
Gumbsch, P.; Götz, T.:
Materials simulation
In: Bullinger, H.-J.: Technology guide: Principles, applications, trends. Berlin: Springer, 2009, pp. 56-59
Hagen, J.; Burmeister, F.; Fromm, A.; Manns, P.; Kleer, G.:
Iridium coatings with titanium sub-layer deposited by RF magnetron sputtering: Mechanical properties and contact behavior with RoHS-compliant glass melt
(International Conference on Plasma Surface Engineering (PSE) <11, 2008, Garmisch-Partenkirchen>)
In: Plasma Processes and Polymers, Vol.6 (2009), Supplement 1, pp.678-683
Hardenacke, V.; Hohe, J.:
Local probabilistic homogenization of two-dimensional model foams accounting for micro structural disorder
In: International Journal of Solids and Structures, Vol.46 (2009), No.5, pp.989-1006
Hardenacke, V.; Luckow, S.; Siegele, D.; Hohe, J.:
Ein erweitertes Modell zur probabilistischen Sprödbruchbewertung basierend auf lokalen Feldgrößen
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <41, 2009, Wuppertal>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung. Beanspruchungsanalyse, Prüfmethoden und Anwendungen: 41. Tagung des DVM-Arbeitskreises Bruchvorgänge; 17. + 18. Februar 2009, Bergische Universität Wuppertal. Berlin: DVM, 2009. (DVM-Bericht 241), pp. 89-98
Hartrott, P. von; Holmström, S.; Caminada, S.; Pillot, S.:
Life-time prediction for advanced low alloy steel P23
(International Conference of Creep and Fracture of Engineering Materials and Structures (CREEP) <11, 2008, Bad Berneck>)
In: Glatzel, U.: 11th International Conference of Creep and Fracture of Engineering Materials and Structures, CREEP 2008: Held at Bad Berneck, Germany, 4 - 9 May 2008. Amsterdam: Elsevier, 2009. (Materials science & engineering. A, Structural materials: properties, microstructure and processing 510/511.2009), pp. 175-179
urn:nbn:de:0011-n-961315
Hashibon, A.; Elsässer, C.; Gumbsch, P.:
Structure and failure of Fcc/Bcc heterophase boundaries in metals
(Plansee Seminar <17, 2009, Reutte>)
In: Sigl, L.S.: 17th Plansee Seminar 2009. International Conference on High Performance P/M Materials. Vol.3: Reutte, Austria May 25-29,2009. Reutte: Plansee, 2009, pp. WS4/1-WS4/10
Hashibon, A.; Schravendijk, P.; Elsässer, C.; Gumbsch, P.:
Atomistic study of structure and stability of thin Ni films on Fe surfaces
In: The philosophical magazine, Vol.89 (2009), No.34-36, pp.3413-3433
Heinonen, J.; Schmidt, I.:
An analysis of the stress state in a green part during ejection from the die
(International Powder Metallurgy Congress and Exhibition (EURO PM) <2009, Copenhagen>)
In: European Powder Metallurgy Association -EPMA-: Euro PM 2009. Proceedings. Vol.3: Powder pressing - sintering - tools for improving PM - quality & inspection: 12.-14.10.2009, Copenhagen, Denmark. Stockholm: EPMA, 2009, pp. 53-58
Hildenbrand, J.; Peter, C.; Lamprecht, F.; Kürzinger, A.; Naumann, F.; Ebert, M.; Wehrspohn, R.; Wöllenstein, J.:
Fast transient temperature operating micromachined emitter for mid-infrared for optical gas sensing systems
(Conference "Smart Sensors, Actuators, and MEMS" <4, 2009, Dresden>)
In: Schmid, U.: Smart Sensors, Actuators, and MEMS IV: 4 May 2009, Dresden, Germany. Bellingham, WA: SPIE, 2009. (SPIE Proceedings Series 7362), Art. 73620S
urn:nbn:de:0011-n-955245
Hochrainer, T.; Zaiser, M.; Gumbsch, P.:
Dislocation transport and line length increase in averaged descriptions of dislocations
(International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) <2009, Rethymno/Crete>)
In: Simos, T.E.: Numerical analysis and applied mathematics. International Conference on Numerical Analysis and Applied Mathematics 2009. Vol.2: Rethymno, Crete, Greece, 18 - 22 September 2009. New York, N.Y.: AIP Press, 2009. (AIP Conference Proceedings 1168), pp. 1133-1136
Hohe, J.; Brand, M.; Siegele, D.:
Experimental and numerical investigation of sub-clad and surface cracks in cladded components
(Pressure Vessels and Piping Conference <2008, Chicago/Ill.>)
In: Rodery, C.D.: ASME Pressure Vessels and Piping Conference 2008. Proceedings. Vol.3: Design and analysis: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27 - 31, 2008, Chicago, Illinois, USA. New York/NY.: ASME, 2009, pp. 267-272
Hohe, J.; Hardenacke, V.; Luckow, S.; Siegele, D.:
An enhanced model for probabilistic cleavage fracture assessment considering local constraint effects
(International Conference on Fracture (ICF) <12, 2009, Ottawa>)
In: Materials Technology Laboratory -MTL-, Ottawa: 12th International Conference on Fracture 2009. Proceedings. CD-ROM: Ottawa, Canada, July 12 - 17, 2009. Ottawa: NRCanCANMET, 2009
Hohe, J.; Hardenacke, V.:
Numerisches Design zur effizienten Entwicklung neuer Werkstoffe
(ProcessNet Jahrestagung <3, 2009, Mannheim>)
In: Gesellschaft Deutscher Chemiker -GDCh-, Frankfurt/Main: ProcessNet-Jahrestagung und 27. Jahrestagung der Biotechnologen 2009: 8. bis 10. September 2009 - Mannheim. Weinheim: Wiley-VCH, 2009. (Chemie - Ingenieur - Technik 81.2009, Nr.8), pp. 1118
Hollstein, T.:
Walzen mit Keramik - Anwendungsspektrum und Projektüberblick
(Fachsymposium "Keramik für die Walztechnik" <2009, Neuwied>)
In: Kailer, A.: Walzen mit Keramik. Fachsymposium "Keramik für die Walztechnik" 2009. Tagungsband: 28. und 29. Juli 2009, Neuwied, Verbundprojekt "Neue keramische Werkstoffe für Form- und Profilwalzen und andere Komponenten der Walztechnik". Stuttgart: Fraunhofer IRB Verlag, 2009, pp. 7-22
Hormann, C.; Meier, S.; Moseler, M.:
The importance of non-local shadowing for the topography evolution of a-C:H films grown by toluene based plasma enhanced chemical vapor deposition
In: The European physical journal. B, Condensed matter physics, Vol.69 (2009), No.2, pp.187-194
urn:nbn:de:0011-n-961545
Hörner, M.; Gemetz, F.:
Bodenbearbeitungsgeraet
2009
Huber, B.; Moseler, M.; Kostko, O.; Issendorff, B. von:
Structural evolution of the sodium cluster anions Na(20-)-Na(57-)
In: Physical Review. B, Vol.80 (2009), No.23, Art. 235425, 6 pp.
Hummert, K.; Schattevoy, R.; Broda, M.; Knappe, M.; Beiss, P.; Klubberg, F.; Schubert, Th.; Leuschner, R.:
Nano-crystalline P/M aluminium for automotive applications
In: Journal of physics. Conference series, Vol.144 (2009), Art. 012006
Jaeger, C.R.; Koplin, C.; Gurr, M.; Meiners, W.:
Internal stresses and shape distortions in generatively manufactured implants
(World Conference on Regenerative Medicine (WRM) <2009, Leipzig>)
In: Regenerative medicine, Vol.4 (2009), No.6, Supplement2, pp.103-104
Jaeger, D.; Schischka, J.; Bagdahn, J.; Jaeger, R.:
Tensile testing of individual ultrathin electrospun poly(L-lactic acid) fibers
In: Journal of applied polymer science, Vol.114 (2009), No.6, pp.3774-3779
Jaeger, R.:
Hauptkriterium für Dentalimplantate ist die mechanische Belastbarkeit
In: Maschinenmarkt. MM, das Industriemagazin, (2009), No.20, pp.70-72
Jaeger, R.:
Simulation beachtet Gewebezüchtung
In: Medizin & Technik, (2009), No.6, pp.94-95
Janisch, R.; Elsässer, C.:
Interstitial impurities at grain boundaries in metals: Insight from atomistic calculations
In: International journal of materials research, Vol.100 (2009), No.11, pp.1488-1493
Kailer, A.; Fraunhofer-Institut für Werkstoffmechanik -IWM-, Freiburg/Brsg.:
Walzen mit Keramik. Fachsymposium "Keramik für die Walztechnik" 2009. Tagungsband: 28. und 29. Juli 2009, Neuwied, Verbundprojekt "Neue keramische Werkstoffe für Form- und Profilwalzen und andere Komponenten der Walztechnik"
(Fachsymposium "Keramik für die Walztechnik" <2009, Neuwied>)
Stuttgart: Fraunhofer IRB Verlag, 2009
ISBN 3-8396-0033-2
ISBN 978-3-8396-0033-7
Kailer, A.:
Keramische Hochleistungswerkstoffe - Eigenschaften und Merkmale im Hinblick auf walztechnische Anwendungen
(Fachsymposium "Keramik für die Walztechnik" <2009, Neuwied>)
In: Kailer, A.: Walzen mit Keramik. Fachsymposium "Keramik für die Walztechnik" 2009. Tagungsband: 28. und 29. Juli 2009, Neuwied, Verbundprojekt "Neue keramische Werkstoffe für Form- und Profilwalzen und andere Komponenten der Walztechnik". Stuttgart: Fraunhofer IRB Verlag, 2009, pp. 23-32
Kailer, A.; Amann, T.; Konrath, G.; Janietz, D.; Sawade, H.:
Ultralow friction and wear of reciprocating systems lubricated by liquid crystalline fluids
(International Symposium on Friction, Wear and Wear Protection <2008, Aachen>)
In: Fischer, A.: Friction, wear and wear protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany, from April 9th to 11th, 2008. Weinheim: Wiley-VCH, 2009, pp. 409-416
Khader, I.; Fünfschilling, S.; Kailer, A.; Oberacker, R.:
The behavior of silicon nitride tools in hot rolling copper wire
(International Symposium on Friction, Wear and Wear Protection <2008, Aachen>)
In: Fischer, A.: Friction, wear and wear protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany, from April 9th to 11th, 2008. Weinheim: Wiley-VCH, 2009, pp. 383-392
Khader, I.; Kailer, A.:
Silicon nitride wire-rolling tools: A failure-mode analysis and correlation with rolling-contact fatigue
(European Ceramic Society (ECERS International Conference and Exhibition) <11, 2009, Krakow>)
In: Bucko, M.M.: 11th international conference of the European Ceramic Society 2009. Proceedings. CD-ROM: Krakow, 21 - 25 June 2009, pp. 74-83
Kohn, C.; Kuebler, R.; Mueller, S.:
Metallisch kontaktiertes Substrat sowie Verfahren zu dessen Herstellung
2009
Koller, S.; Mayrhofer, L.; Grifoni, M.:
Graphene armchair nanoribbon single-electron transistors: The peculiar influence of end states
In: epl. A letters journal exploring the frontiers of physics, Vol.88 (2009), No.5, Art. 57001, 6 pp.
Koplin, C.; Jaeger, R.; Hahn, P.:
A material model for internal stress of dental composites caused by the curing process
In: Dental materials, Vol.25 (2009), No.3, pp.331-338
Koplin, C.; Gurr, M.; Kübler, R.; Mühlhaupt, R.; Jaeger, R.:
Formgenauigkeit in der Stereolithographie: Materialmodell zur Simulation des Aushärteverhaltens lichthärtender Harze
In: Konstruktion, (2009), No.11-12, pp.IW11-IW12
Körbel, S.; Elsässer, C.:
Ab initio and atomistic simulation of copper doping in the lead-free ferroelectric perovskite potassium sodium niobate
(Deutsche Physikalische Gesellschaft (Frühjahrstagung) <2009, Dresden>)
In: Verhandlungen der Deutschen Physikalischen Gesellschaft, Vol.44 (2009), No.5, pp.138
Krämer, F.; Rzepka, S.; Lienig, J.:
Lifetime modeling for JEDEC drop tests
(International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) <10, 2009, Delft>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 10th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2009: Delft, Netherlands, 26 - 29 April 2009. New York, NY: IEEE, 2009, pp. 309-317
Krummhauer, O.; Presser, V.; Kailer, A.; Nickel, K.G.:
Korrosionsverhalten von Siliziumkarbid in Gleitbeanspruchung
(Tribologie-Fachtagung <50, 2009, Göttingen>)
In: Gesellschaft für Tribologie, Moers: Reibung, Schmierung und Verschleiß. Forschung und praktische Anwendungen. Bd.1: 50. Tribologie-Fachtagung; 21. bis 23. September 2009 in Göttingen. Aachen: GfT, 2009, pp. 44/1-44/9
Krummhauer, O.; Presser, V.; Kailer, A.; Nickel, K.G.:
Korrosionsverhalten von Siliziumkarbid in Gleitbeanspruchung unter Wasserschmierung
(Metallographie-Tagung <43, 2009, Aachen>)
In: Bührig-Polaczek, A.: Fortschritte in der Metallographie: Vortragstexte der 43. Metallographie-Tagung, 16. - 18. September 2009 in Aachen. Frankfurt: Werkstoff-Informationsgesellschaft, 2009. (Praktische Metallographie, Sonderband 41), pp. 225-230
Kuzmychov, O.; Koplin, C.; Jaeger, R.; Büchner, H.; Gopp, U.:
Physical aging and the creep behavior of acrylic bone cements
In: Journal of biomedical materials research. Part B: Applied biomaterials, Vol.91 (2009), No.2, pp.910-917
Luke, M.; Varfolomeyev, I.; Lütkepohl, K.; Esderts, A.:
Fracture mechanics assessment of crack propagation in railway axle steels under fully reversed variable amplitude loading
(International Conference on Material and Component Performance under Variable Amplitude Loading <2, 2009, Darmstadt>)
In: Sonsino, C.M.: Second International Conference on Material and Component Performance under Variable Amplitude Loading 2009. Proceedings. Vol.1: March 23 - 26, 2009, Darmstadt, Germany. Berlin: DVM, 2009, pp. 259-268
Lütkepohl, K.; Esderts, A.; Varfolomeev, I.; Luke, M.:
Methodik zur Festlegung von Inspektionsintervallen an Radsatzwellen aus 34CrNiMo6 und A4T
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <41, 2009, Wuppertal>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung. Beanspruchungsanalyse, Prüfmethoden und Anwendungen: 41. Tagung des DVM-Arbeitskreises Bruchvorgänge; 17. + 18. Februar 2009, Bergische Universität Wuppertal. Berlin: DVM, 2009. (DVM-Bericht 241), pp. 221-235
Mayer, U.; Böhme, W.; Borsutzki, M.; Häcker, R.; Schneider, K.:
Hochgeschwindigkeitszugversuche an gefügten Stählen
In: MP materials testing, Vol.51 (2009), No.11-12, pp.755-760
Moseler, M.; Bierwisch, C.; Kraft, T.; Riedel, H.:
Three-dimensional discrete element models for the granular statics and dynamics of powders
(International Conference on Computational Methods for Coupled Problems in Science and Engineering <3, 2009, Ischia>)
In: Schrefler, B.: Third International Conference on Computational Methods for Coupled Problems in Science and Engineering 2009: Held in Ischia Island, Italy, from June 8 - 10, 2009. Barcelona: CIMNE, 2009
Motz, C.; Weygand, D.; Senger, J.; Gumbsch, P.:
Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity
In: Acta Materialia, Vol.57 (2009), No.6, pp.1744-1754
Mrocev, M.; Elsässer, C.; Gumbsch, P.:
Interactions between lattice dislocations and twin boundaries in tungsten: A comparative atomistic simulation study
In: The philosophical magazine, Vol.89 (2009), No.34-36, pp.3179-3194
Mrovec, M.; Albina, J.-M.; Meyer, B.; Elsässer, C.:
Schottky barriers at transition-metal/SrTiO3(001) interfaces
In: Physical Review. B, Vol.78 (2009), No.24, Art. 245121, 18 pp.
urn:nbn:de:0011-n-969880
Mrovec, M.; Elsässer, C.; Gumbsch, P.:
Atomistic simulations of lattice defects in tungsten
(Plansee Seminar <17, 2009, Reutte>)
In: Sigl, L.S.: 17th Plansee Seminar 2009. International Conference on High Performance P/M Materials. Vol.3: Reutte, Austria May 25-29,2009. Reutte: Plansee, 2009, pp. WS2/1-WS2/9
Nepijko, S.A.; Graff, A.; Schönhense, G.; Schneider, C.M.:
Quantitative determination of magnetic fields from iron particles of oblong form encapsulated by carbon nanotubes using electron holography
In: Applied physics. A, Vol.94 (2009), No.3, pp.543-547
Nickel, K.G.; Presser, V.; Krummhauer, O.; Kailer, A.; Wirth, R.:
Hydrothermal oxidation of silicon carbide and its bearing on wet wear mechanism
(International Conference on Advanced Ceramics and Composites <32, 2008, Daytona Beach/Fla.>)
In: Salem, J.: Corrosion, wear, fatigue, and reliability of ceramics: A collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27 - February 1, 2008, Daytona Beach, Florida; Contains papers presented in the Mechanical Behavior and Structural Design of Monolithic and Composite Ceramics Symposium. Hoboken/NJ: Wiley, 2009. (Ceramic engineering & science proceedings 29.2009,3), pp. 143-154
Pastewka, L.; Koskinen, P.; Elsässer, C.; Moseler, M.:
Understanding the microscopic processes that govern the charge-induced deformation of carbon nanotubes
In: Physical Review. B, Vol.80 (2009), No.15, Art. 155428, 16 pp.
urn:nbn:de:0011-n-1104104
Pastewka, L.; Salzer, R.; Graff, A.; Altmann, F.; Moseler, M.:
Surface amorphization, sputter rate, and intrinsic stresses of silicon during low energy Ga+ focused-ion beam milling
(International Conference on Computer Simulation of Radiation Effects in Solids (COSIRES) <9, 2008, Beijing>)
In: Wang, T.: Computer simulation of radiation effects in solids. Ninth International Conference on Computer Simulation of Radiation Effects in Solids, COSIRES 2008. Proceedings: Beijing, China, 12 - 17 October 2008. Amsterdam: Elsevier, 2009. (Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms 267.2009, Nr.18), pp. 3072-3075
urn:nbn:de:0011-n-1113727
Pavlica, S.; Piscioneri, A.; Peinemann, F.; Keller, M.; Milosevic, J.; Staeudte, A.; Heilmann, A.; Schulz-Siegmund, M.; Laera, S.; Favia, P.; Bartolo, L. de; Bader, A.:
Rat embryonic liver cell expansion and differentiation on NH3 plasma-grafted PEEK-WC-PU membranes
In: Biomaterials, Vol.30 (2009), No.33, pp.6514-6521
Paxton, A.T.; Todorov, T.N.; Elena, A.M.:
Ring currents in azulene
In: Chemical Physics Letters, Vol.483 (2009), No.1-3, pp.154-158
Pfeiffer, W.:
Eigenspannungsoptimierung überwindet Schwächen. Neue Perspektiven für hoch belastete Hartchromschichten
In: Konstruktion, (2009), No.4, pp.IW14-IW15
Piscanec, S.; Zuliani, F.; Colombi Ciacchi, L.; Levita, G.; Sbaizero, O.; Vita, A. de:
DFT modelling of ceramic materials and interfaces
In: International journal of materials & product technology, Vol.35 (2009), No.3-4, pp.271-292
Prakash, A.; Weygand, S.M.; Riedel, H.:
Modeling the evolution of texture and grain shape in Mg alloy AZ31 using the crystal plasticity finite element method
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 744-750
urn:nbn:de:0011-n-961981
Prakash, A.; Lebensohn, R.A.:
Simulation of micromechanical behavior of polycrystals: Finite elements versus fast Fourier transforms
(Symposium on Multiscale Modeling of Microstructure Evolution in Materials <2008, Tallahassee/Fla.>)
In: Modelling and simulation in materials science and engineering, Vol.17 (2009), No.6, Art. 064010, 16 pp.
urn:nbn:de:0011-n-1063076
Presser, V.; Krummhauer, O.; Nickel, K.G.; Kailer, A.; Berthold, C.; Raisch, C.:
Tribological and hydrothermal behaviour of silicon carbide under water lubrication
In: Wear, Vol.266 (2009), No.7-8, pp.771-781
Presser, V.; Nickel, K.G.; Krummhauer, O.; Kailer, A.:
A model for wet silicon carbide tribo-corrosion
(International Conference on Wear of Materials <17, 2009, Las Vegas/Nev.>)
In: Ludema, K.C.: 17th International Conference on Wear of Materials 2009. Vol.1: Las Vegas, USA, 19 - 23 April 2009. Amsterdam: Elsevier, 2009. (Wear 267.2009, Nr.1-4), pp. 168-176
Presser, V.; Krummhauer, O.; Nickel, K.G.; Kailer, A.; Wirth, R.:
Corrosion behavior of silicon carbide in aqueous media lubricated sliding applications
(International Symposium on Friction, Wear and Wear Protection <2008, Aachen>)
In: Fischer, A.: Friction, wear and wear protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany, from April 9th to 11th, 2008. Weinheim: Wiley-VCH, 2009, pp. 191-197
Presser, V.; Krummhauer, O.; Nickel, K.G.; Kailer, A.; Wirth, R.:
On the P-T conditions of wet silicon carbide tribo-corrosion
(International Symposium on Friction, Wear and Wear Protection <2008, Aachen>)
In: Fischer, A.: Friction, wear and wear protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany, from April 9th to 11th, 2008. Weinheim: Wiley-VCH, 2009, pp. 198-206
Renz, A.; Kailer, A.; Koplin, C.:
Testing the feasibility of new ceramic cutting tools - a case study on experimental and numerical evaluation of geometry and machining techniques
(European Ceramic Society (ECERS International Conference and Exhibition) <11, 2009, Krakow>)
In: Bucko, M.M.: 11th international conference of the European Ceramic Society 2009. Proceedings. CD-ROM: Krakow, 21 - 25 June 2009, pp. 1006-1012
Ripoll, M.R.; Reisacher, E.; Riedel, H.:
Texture induced tension-compression asymmetry of drawn tungsten wires
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 788-792
Rist, T.; Schmitt, W.:
Numerical simulation of the crimping process
(The Minerals, Metals and Materials Society (TMS Annual Meeting and Exhibition) <138, 2009, San Francisco/Calif.>)
In: The Minerals, Metals and Materials Society -TMS-, Warrendale/Pa.: TMS 2009, 138th Annual Meeting & Exhibition. Supplemental Proceedings. Volume 3: General Paper Selections: San Francisco, California, Febrary 15-19, 2009. Warrendale, Pa.: TMS, 2009, pp. 517-522
Rodriguez Ripoll, M.; Ocenasek, J.:
Microstructure and texture evolution during the drawing of tungsten wires
(Workshop on Material Models - from Nano to Macro (MatModels) <2007, Hamburg>)
In: Engineering fracture mechanics, Vol.76 (2009), No.10, pp.1485-1499
Roehl, K.; Becker, S.; Fuhrmeister, C.; Teuscher, N.; Füting, M.; Heilmann, A.:
New, non-invasive thermographic examination of body surface temperature on tetraplegic and paraplegic patients, as a supplement to existing diagnostic measures
In: Spinal cord, Vol.47 (2009), No.6, pp.492-495
Sandfeld, S.; Zaiser, M.; Hochrainer, T.:
Expansion of quasi-discrete dislocation loops in the context of a 3D continuum theory of curved dislocations
(International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) <2009, Rethymno/Crete>)
In: Simos, T.E.: Numerical analysis and applied mathematics. International Conference on Numerical Analysis and Applied Mathematics 2009. Vol.2: Rethymno, Crete, Greece, 18 - 22 September 2009. New York, N.Y.: AIP Press, 2009. (AIP Conference Proceedings 1168), pp. 1148-1151
Schmidt, C.; Naumann, F.; Altmann, F.; Martens, S.; Wilde, J.:
Thermal simulation of defect localisation using lock-in thermography in complex and fully packaged devices
(International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) <10, 2009, Delft>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 10th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2009: Delft, Netherlands, 26 - 29 April 2009. New York, NY: IEEE, 2009, pp. 736-741
Schmidt, C.; Simon, M.; Altmann, F.; Nowodzinski, A.:
Failure analysis of stacked-die devices by combining non-destructive localization and target preparation methods
(International Symposium for Testing and Failure Analysis (ISTFA) <35, 2009, San Jose/Calif.>)
In: Electronic Device Failure Analysis Society -EDFAS-, Materials Park/Ohio: 35th International Symposium for Testing and Failure Analysis 2009. Conference proceedings: November 14 - 19, 2009, San Jose McEnery Convention Center, San Jose, California, USA. Materials Park, Ohio: ASM International, 2009, pp. 319-323
Schwan, S.; Menzel, M.; Fritzsche, M.; Heilmann, A.; Spohn, U.:
Micromechanical measurements on P-protein aggregates (forisomes) from Vicia faba plants
In: Biophysical chemistry, Vol.139 (2009), No.2-3, pp.99-105
Schwan, S.; Ferrell, N.; Hansford, D.; Spohn, U.; Heilmann, A.:
Measurement of mechanical forces generated by plant P-protein aggregates (forisomes)
In: European biophysics journal, Vol.38 (2009), No.4, pp.533-536
Schwanke, D.; Pohlner, J.; Wonisch, A.; Kraft, T.; Geng, J.:
Enhancement of fine line print resolution due to coating of screen fabrics
In: Journal of microelectronics and electronic packaging, Vol.6 (2009), No.1, pp.13-19
urn:nbn:de:0011-n-1130614
Schwarz, S.; Marton, F.; Pfeiffer, W.:
Verfahren zum thermischen Fuegen wenigstens zweier metallischer Bauteile
2009
Seelig, T.; Giessen, E. van der:
A cell model study of crazing and matrix plasticity in rubber-toughened glassy polymers
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 725-728
Seifert, T.; Schmidt, I.:
Plastic yielding in cyclically loaded porous materials
In: International Journal of Plasticity, Vol.25 (2009), No.12, pp.2435-2453
urn:nbn:de:0011-n-1133798
Seifert, T.; Hartrott, P. von; Riedel, H.; Siegele, D.:
Thermomechanical fatigue life prediction of high temperature components
(MPA-Seminar <35, 2009, Stuttgart>)
In: Staatliche Materialprüfungsanstalt -MPA-, Stuttgart: 35. MPA-Seminar 2009. CD-ROM: Werkstoff- & Bauteilverhalten in der Energie- & Anlagentechnik, 09.10.2009, Stuttgart. Stuttgart: MPA, 2009, pp. 16.1
Seifert, T.; Riedel, H.:
Fatigue life prediction of high temperature components in combustion engines and exhaust systems
(European Automotive Simulation Conference (EASC) <4, 2009, München>)
In: Seibert, K.W.: Simulation for innovative design: Proceedings of the 4th EASC 2009 European Automotive Simulation Conference. Munich, Germany, 6th - 7th July 2009. Canonsburg, PA, 2009, pp. 313-324
Seifert, T.:
Thermomechanische Ermüdung von Eisengusswerkstoffen: Computerbasierte Auslegung von Hochtemperaturbauteilen
In: Konstruktion, (2009), No.1-2, pp.IW9-IW10
Siegele, D.; Varfolomeyev, I.; Nagel, G.:
Inherent margin in the brittle failure assessment for RPV
(Pressure Vessels and Piping Conference <2008, Chicago/Ill.>)
In: Rodery, C.D.: ASME Pressure Vessels and Piping Conference 2008. Proceedings. Vol.3: Design and analysis: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27 - 31, 2008, Chicago, Illinois, USA. New York/NY.: ASME, 2009, pp. 365-370
Siegele, D.; Hartrott, P. von:
Investigation of thermo-mechanical fatigue problems in power plant applications using viscoplastic material models
(International Symposium on Plasticity and its Current Applications <15, 2009, St.Thomas>)
In: Khan, A.S.: Macro-to-nano-scale inelastic of materials, plasticity, fatigue & fracture. The 15th International Symposium on Plasticity & its Current Applications. CD-ROM: Jan. 3 - 8, 2009, St. Thomas, U. S. Virgin Island. Fulton, Md.: NEAT Press, 2009
Siska, F.; Weygand, D.; Forest, S.; Gumbsch, P.:
Comparison of mechanical behaviour of thin film simulated by discrete dislocation dynamics and continuum crystal plasticity
(International Workshop on Computational Mechanics of Materials (IWCMM) <17, 2007, Paris>)
In: Cailletaud, G.: 17th International Workshop on Computational Mechanics of Materials, IWCMM 2007. Proceedings: Paris, France, 22 - 24 August, 2007. Amsterdam: Elsevier, 2009. (Computational materials science 45.2009, Nr.3), pp. 793-799
Sommer, S.; Andrieux, F.; Memhard, D.; Sun, D.-Z.:
Versagensmodellierung von Punktschweiß- und Klebverbindungen unter Crashbelastung
In: MP materials testing, Vol.51 (2009), No.1-2, pp.13-21
Sommer, S.:
Charakterisierung und Ersatzmodellierung von laserstrahlgeschweißten Stahlblechen für die Crashsimulation
(Workshop zum Werkstoff- und Strukturverhalten bei Crashvorgängen (CrashMAT) <5, 2009, Freiburg>)
In: Fraunhofer-Institut für Kurzzeitdynamik, Ernst-Mach-Institut -EMI-, Freiburg/Brsg.: 5. Freiburg Workshop zum Werkstoff- und Strukturverhalten bei Crashvorgängen, crashMAT 2009. Tagungsband. CD-ROM: 21.04.-22.04.2009, Freiburg. Freiburg: Fraunhofer EMI, 2009
Sommer, S.; Klokkers, F.:
Modelling of the deformation and fracture behaviour of laser welds for crash simulation
(European LS-DYNA Conference <7, 2009, Salzburg>)
In: DYNAmore GmbH, Stuttgart: 7th European LS-DYNA Conference 2009. Proceedings. Salzburg, 2009, pp. 45-46
Steiner, T.; Cupelli, C.; Zengerle, R.; Santer, M.:
Simulation of advanced microfluidic systems with dissipative particle dynamics
In: Microfluidics and nanofluidics, Vol.7 (2009), No.3, pp.307-323
Sun, D.-Z.; Andrieux, F.; Feucht, M.:
Damage modelling of a TRIP steel for integrated simulation from deep drawing to crash
(European LS-DYNA Conference <7, 2009, Salzburg>)
In: DYNAmore GmbH, Stuttgart: 7th European LS-DYNA Conference 2009. Proceedings. Salzburg, 2009, pp. B-III-04
Szyszka, B.; Georg, A.; Löbmann, P.; May, C.; Elsaesser, C.:
A multidisciplinary approach towards advanced transparent conductive electrodes
(International Conference on Architectural and Automotive Glass <11, 2009, Tampere>)
In: Glass Performance Days 2009: Professionals, Products, Processing; Conference Proceedings; Tampere, Finland, 12 - 15 June 2009. Tampere, 2009, pp. 644-648
Thielicke, B.; Grigo, M.; Dreißig, J.:
LFT-Kennwerte aus Zugversuchen: Round Robin Tests zum Einfluss der Probengeometrie
In: Konstruktion, (2009), No.10, pp.IW8
Umeno, Y.; Albina, J.M.; Meyer, B.; Elsässer, C.:
Ab initio calculations of ferroelectric instability in PbTiO3 capacitors with symmetric and asymmetric electrode layers
In: Physical Review. B, Vol.80 (2009), No.20, Art.205122, 8 pp.
urn:nbn:de:0011-n-1332080
Varfolomeev, I.; Luke, M.; Burdack, M.:
Untersuchungen zum Einfluss der Probengeometrie auf das zyklische Rissfortschrittsverhalten
(Deutscher Verband für Materialforschung und -prüfung, Arbeitskreis Bruchvorgänge (Tagung) <41, 2009, Wuppertal>)
In: Klingbeil, D.: Bruchmechanische Werkstoff- und Bauteilbewertung. Beanspruchungsanalyse, Prüfmethoden und Anwendungen: 41. Tagung des DVM-Arbeitskreises Bruchvorgänge; 17. + 18. Februar 2009, Bergische Universität Wuppertal. Berlin: DVM, 2009. (DVM-Bericht 241), pp. 43-52
Varfolomeyev, I.; Beukelmann, D.:
Analytical solutions and tools for assessment of surface cracks in cylindrical components
(Pressure Vessels and Piping Conference <2008, Chicago/Ill.>)
In: Gupta, N.K.: ASME Pressure Vessels and Piping Conference 2008. Proceedings. Vol.7: Operations, applications and components: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27 - 31, 2008, Chicago, Illinois, USA. New York/NY.: ASME, 2009, pp. 35-46
Varfolomeyev, I.; Pyttel, B.:
FKM guideline »Fracture mechanics proof of strength for engineering components« - procedures, compendiums, examples
(Pressure Vessels and Piping Conference <2008, Chicago/Ill.>)
In: Hasegawa, K.: ASME Pressure Vessels and Piping Conference 2008. Proceedings. Vol.1: Codes and standards: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27 - 31, 2008, Chicago, Illinois, USA. New York/NY.: ASME, 2009, pp. 637-646
Voigt, F.; Krohs, F.; Gerbach, R.:
Flexural-torsional resonance mode of a chip cantilever system: Applications to nanomachining
(International Vacuum Nanoelectronics Conference (IVNC) <21, 2008, Wroclaw>)
In: Journal of vacuum science and technology B. Microelectronics and nanometer structures, Vol.27 (2009), No.2, pp.958-963
Walter, M.; Moseler, M.:
Ligand-protected gold alloy clusters: Doping the superatom
In: Journal of physical chemistry. C, Nanomaterials and interfaces, Vol.113 (2009), No.36, pp.15834-15837
Weygand, D.; Senger, J.; Motz, C.; Augustin, W.; Heuveline, V.; Gumbsch, P.:
High performance computing and discrete dislocation dynamics: Plasticity of micrometer sized specimens
In: Nagel, W.E.: High Performance Computing in Science and Engineering '08: Transactions of the High Performance Computing Center, Stuttgart (HLRS) 2008. Berlin: Springer, 2009, pp. 507-523
Wiese, S.; Meier, R.; Kraemer, F.; Bagdahn, J.:
Constitutive behaviour of copper ribbons used in solar cell assembly processes
(International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) <10, 2009, Delft>)
In: Institute of Electrical and Electronics Engineers -IEEE-: 10th International Conference on Thermal, Mechanical & Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2009: Delft, Netherlands, 26 - 29 April 2009. New York, NY: IEEE, 2009, pp. 44-51
Windisch, M.; Sun, D.Z.; Memhard, D.; Siegele, D.:
Defect tolerance assessment of ARIANE 5 structures on the basis of damage mechanics material modelling
(Workshop on "Integrity of Thin-Walled Light-Weight Structures" <2006, Geesthacht>)
In: Heinimann, M.: Integrity of thin-walled light-weight structures - concepts and applications: Collection of papers from the Workshop, held at the GKSS Research Center Geesthacht, Germany on October 24 - 25, 2006. Amsterdam: Elsevier, 2009. (Engineering fracture mechanics 76.2009, Nr.1), pp. 59-73
Wonisch, A.; Kraft, T.; Moseler, M.; Riedel, H.:
Effect of different particle size distributions on solid-state sintering: A microscopic simulation approach
In: Journal of the American Ceramic Society, Vol.92 (2009), No.7, pp.1428-1434
Wünsche, M.; Zhang, C.; Kuna, M.:
Dynamische Rissanalyse in geschichteten anisotropen Verbundwerkstoffen mit einer Zeitbereichs-Randelementmethode
In: MP materials testing, Vol.51 (2009), No.3, pp.116-124
Zaiser, M.; Hochrainer, T.:
Symposium on modelling complex materials: Materials behavior below the scale of the representative volume element
(International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) <2009, Rethymno/Crete>)
In: Simos, T.E.: Numerical analysis and applied mathematics. International Conference on Numerical Analysis and Applied Mathematics 2009. Vol.2: Rethymno, Crete, Greece, 18 - 22 September 2009. New York, N.Y.: AIP Press, 2009. (AIP Conference Proceedings 1168), pp. 1121-1122
Ziegler, T.; Neubrand, A.; Roy, S.; Wanner, A.; Piat, R.:
Elastic constants of metal/ceramic composites with lamellar microstructures: Finite element modelling and ultrasonic experiments
In: Composites science and technology, Vol.69 (2009), No.5, pp.620-626
urn:nbn:de:0011-n-922879
Ziegler, T.; Neubrand, A.:
Modellierung der Eigenschaften und des Versagens von Metallmatrixverbundwerkstoffen mit lamellarer Struktur
(Symposium Verbundwerkstoffe und Werkstoffverbunde <17, 2009, Bayreuth>)
In: Krenkel, W.: Verbundwerkstoffe. 17. Symposium Verbundwerkstoffe und Werkstoffverbunde 2009: 01.-03. April 2009, Bayreuth. Weinheim: Wiley-VCH, 2009, pp. 46-51
Zimmermann, J.; Finnis, M.W.; Ciacchi, L.C.:
Vacancy segregation in the initial oxidation stages of the TiN(100) surface
In: The Journal of chemical physics, Vol.130 (2009), No.13, Art. 134714, 11 pp.
urn:nbn:de:0011-n-947321