Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Determination of shot peened surface states using the magnetic Barkhausen noise method

Bestimmung von Eigenschaften gestrahlter Stahloberflächen mittels des magnetischen Barkhausen-Rauschens
 
: Hauk, V.; Oudelhoven, R.; Höller, P.; Theiner, W.A.

Höller, P. ; Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. -DGZfP-, Berlin:
Nondestructive Characterization of Materials III
Berlin/West: Springer, 1989
ISBN: 3-540-51856-8
S.466-473
International Symposium on Nondestructive Characterization of Materials <3, 1988, Saarbrücken>
Englisch
Konferenzbeitrag
Fraunhofer IZFP ()
Armco iron; Barkhausen microstress II and III order; C60; macrostress; micromagnetic; nondestructive; shot peening; stressprofile; work hardening; x-ray

Abstract
The experiments have been performed on different shot peened sheets of Armco iron and the steel C60. The residual stress (RS) distributions have been determined by the X-ray method and by the bending arrow etching method. From these results, the residual stress distributions of first, second (and third) kind have been evaluated. The nondestructive testing has been carried out using the magnetic Barkhausen noise method. From these Barkhausen noise events which are rectified and recorded over the tangential field strength, different stress and microstructure sensitive quantities have been derived. The most important parameter for these testing procedures is the analyzing frequency. This investigation has shown that shot peened surface states can be characterized by these micromagnetic quantities: especially the homogeneity of shot peened-, the work-hardened profile- and the quantitative (after calibration) residual surface-stress state.

: http://publica.fraunhofer.de/dokumente/PX-9462.html