Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Substrate Heating in Sputter Processes

 
: Kälber, T.; Jung, T.

Metallized Plastics 6. Fundamentals and applications. Proceedings of the Sixth Symposium on Metallized Plastics
Paris, 1997
Symposium on Metallized Plastics <6, 1997, Paris>
Englisch
Konferenzbeitrag
Fraunhofer IST ()
gas flow sputtering; magnetron sputtering; substrate heating; thermal load

Abstract
Based on data from Langmuir probe and optical emission spectroscopy (OES) measurements the contributions of different substrate heating mechanisms to the total heat flux are discussed for two sputter processes, gas flow sputtering (GFS) and magnetron sputtering. The variation of these contributions with deposition parameters shows ways to reduce the heat flux to the substrate. In the GFS process the ratio of deposition rate to heat flux could be greatly increased by a proper choice of process parameters, notably process pressure. The main contribution to substrate heating in a typical GFS process results from the recombination of electron-ion-pairs and convection heating by the hot process gas. In unbalanced magnetron sputtering of heavy target atoms most of the heat input into the substrate surface comes from reflected, energetic neutrals and high energy electrons.

: http://publica.fraunhofer.de/dokumente/PX-35301.html