Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Fast transient temperature operating micromachined emitter for mid-infrared for optical gas sensing systems

 
: Hildenbrand, J.; Peter, C.; Lamprecht, F.; Kürzinger, A.; Naumann, F.; Ebert, M.; Wehrspohn, R.; Wöllenstein, J.

:
Preprint urn:nbn:de:0011-n-955245 (1.4 MByte PDF)
MD5 Fingerprint: 3c03135a88f9f28e55bd3684fe09b423
Copyright 2009 Society of Photo-Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.
Erstellt am: 8.7.2010


Schmid, U. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Smart Sensors, Actuators, and MEMS IV : 4 May 2009, Dresden, Germany
Bellingham, WA: SPIE, 2009 (SPIE Proceedings Series 7362)
ISBN: 0-8194-7636-6
ISBN: 978-0-8194-7636-4
ISSN: 0277-786X
Art. 73620S
Conference "Smart Sensors, Actuators, and MEMS" <4, 2009, Dresden>
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IPM ()
Fraunhofer IWM ()
optical gas sensing; micromachined thermal emitter; microhotplate; MEMS; filterphotometer; high temperature; thermal radiation; infrared; thermal source

Abstract
A novel micromachined thermal emitter for fast transient temperature operation is presented. Compared to most commercial available thermal emitters, the one here presented, is able to operate in a pulsed mode. This allows the use of lock-in techniques or pyrodetectors in the data acquisition without the use of an optical chopper for light modulation. Therefore, these types of thermal emitters are very important for small filter photometers. Several spider type hotplate concepts were studied in order to find a design with excellent mechanical stability and high thermal decoupling. The thermal emitters are fabricated using silicon on insulator (SOI) technology and KOH-etching. The emitters are heated with Pt-meanders. For temperature determination an additional Pt-structure is deposited onto the hotplates. The emitters are mounted in TO-5 housings using a ceramic adhesive and gold wire bonding. The used operation temperature is 750°C. In pulsed operation it's important to have a large modulation depth in terms of thermal radiation intensity in the needed spectral range. The maximal reachable modulation depth ranges from ambient temperature to steady state temperature. A modulation frequency of 5 Hz still allows using nearly the maximum modulation depth.

: http://publica.fraunhofer.de/dokumente/N-95524.html