Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing

 
: Turker, M.; Godlinski, D.; Petzoldt, F.

:

Materials characterization 59 (2008), Nr.12, S.1728-1735
ISSN: 1044-5803
Englisch
Zeitschriftenaufsatz
Fraunhofer IFAM ()

Abstract
Three-dimensional printing is a rapid prototyping process in which powdered materials are deposited in layers and selectively joined with binder from an ink-jet style print head. By this method, three-dimensional objects are created directly from their computer-aided design models. This process consists of a moving print head spreading liquid binder through nozzles on a stationary powder bed for fabrication of green parts using computer-aided design data in a layer-wise manner. This process provides the possibility of direct manufacturing of high performance components. In this study production of full-density three-dimensional superalloy parts by three-dimensional printing with a single sintering step was aimed. For this purpose, Inconel 718 superalloy powders were used. Various shaped parts were produced with 100-200 mu m layer thicknesses and then sintered at 1260-1300 degrees C temperatures. Densities of these samples were measured and microstructural evaluations were made.

: http://publica.fraunhofer.de/dokumente/N-89294.html