Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Stable superhydrophobic aluminum surfaces based on laser-fabricated hierarchical textures

 
: Milles, Stephan; Dahms, Johannes; Soldera, Marcos; Lasagni, Andrés-Fabián

:
Volltext ()

Materials 14 (2021), Nr.1, Art. 184, 17 S.
ISSN: 1996-1944
Deutsche Forschungsgemeinschaft DFG
Reinhart-Koselleck-Projekt; 323477257
Englisch
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer IWS ()
aluminum 1050; single-and multi-scale textures; direct laser interference patterning; direct laser writing; superhydrophobicity

Abstract
Laser-microtextured surfaces have gained an increasing interest due to their enormous spectrum of applications and industrial scalability. Direct laser interference patterning (DLIP) and the well-established direct laser writing (DLW) methods are suitable as a powerful combination for the fabrication of single (DLW or DLIP) and multi-scale (DLW+DLIP) textures. In this work, four-beam DLIP and DLW were used independently and combined to produce functional textures on aluminum. The influence of the laser processing parameters, such as the applied laser fluence and the number of pulses, on the resulting topography was analyzed by confocal microscopy and scanning electron microscopy. The static long-term and dynamic wettability characteristics of the laser-textured surfaces were determined through water contact angle and hysteresis measurements, revealing superhydrophobic properties with static contact angles up to 163° and hysteresis as low as 9°. The classical Cassie–Baxter and Wenzel models were applied, permitting a deeper understanding of the observed wetting behaviors. Finally, mechanical stability tests revealed that the DLW elements in the multi-scale structure protects the smaller DLIP features under tribological conditions.

: http://publica.fraunhofer.de/dokumente/N-624626.html