Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Use of carbon additives towards rechargeable zinc slurry air flow batteries

: Choi, Nak Heon; Olmo, Diego del; Milian, Diego; Kissi, Nadia el; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens

Volltext urn:nbn:de:0011-n-6153371 (3.0 MByte PDF)
MD5 Fingerprint: 0c1964f6ffa4ed60a4f09e7885135828
(CC) by
Erstellt am: 8.1.2021

Energies 13 (2020), Nr.17, Art. 4482, 12 S.
ISSN: 1996-1073
European Commission EC
H2020; 765289
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ICT ()
zinc slurry air flow battery; redox flow battery; zinc-air battery; carbon additives; rheology

The performance of redox flow batteries is notably influenced by the electrolyte, especially in slurry-based flow batteries, as it serves as both an ionic conductive electrolyte and a flowing electrode. In this study, carbon additives were introduced to achieve a rechargeable zinc slurry flow battery by minimizing the zinc plating on the bipolar plate that occurs during charging. When no carbon additive was present in the zinc slurry, the discharge current density was 24 mA∙cm−2 at 0.6 V, while the use of carbon additives increased it to up to 38 mA∙cm−2. The maximum power density was also increased from 16 mW∙cm−2 to 23 mW∙cm−2. Moreover, the amount of zinc plated on the bipolar plate during charging decreased with increasing carbon content in the slurry. Rheological investigation revealed that the elastic modulus and yield stress are directly proportional to the carbon content in the slurry, which is beneficial for redox flow battery applications, but comes at the expense of an increase in viscosity (two-fold increase at 100 s−1). These results show how the use of conductive additives can enhance the energy density of slurry-based flow batteries.