Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Calculation of lockbolt joints in mechanical engineering

Bemessung von Verbindungen mit Schließringbolzen im Maschinenbau
 
: Schwarz, M.; Glienke, R.; Wegener, F.; Blunk, C.; Henkel, K.-M.

:

Materialwissenschaft und Werkstofftechnik 51 (2020), Nr.3, S.267-283
ISSN: 0933-5137
ISSN: 1521-4052
Englisch
Zeitschriftenaufsatz
Fraunhofer IGP ()

Abstract
Lockbolts become increasingly important for modern mechanical engineering. The advantageous notch effect in consequence of a softer groove geometry, the larger stress cross section for the same nominal diameter and a lower scattering of preload results in the potential for increasing the load capacity of lockbolt systems in mechanical joints in comparison to conventional bolted joints. Consequently costs can be reduced with structural adjustments in mechanical engineering. These include the reduction of the required nominal diameter and consequently the reduction of component dimensions. Furthermore savings in manufacturing and assembly as well as cost reduction for maintenance are possible. For the calculation of lockbolt systems in mechanical joints the Technical Bulletin DVS‐EFB 3435–2 is available now for design and calculation engineers. The Technical Bulletin allows to calculate joints with lockbolt systems according to VDI 2230 – Part 1 [1, 2]. This paper presents joints with lockbolts in mechanical engineering. At first, the lockbolt technology and the assembly preload of the lockbolts will be introduced. After that the structural behavior of joints with lockbolts under static and alternating load will be presented. Finally, the modified calculation steps according to the VDI 2230 – Part 1 will be demonstrated.

: http://publica.fraunhofer.de/dokumente/N-596583.html