Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Fiber Bragg gratings in active multimode XLMA fibers for high-power kW-class fiber lasers

: Klein, Sarah; Giesberts, Martin; Baer, Patrick; Raguse, Marius; Fitzau, Oliver; Traub, Martin; Hoffmann, Hans-Dieter; Krause, Volker; Rehmann, Georg


Dong, L. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Fiber Lasers XVII. Technology and Systems : 3-6 February 2020, San Francisco, California, United States
Bellingham, WA: SPIE, 2020 (Proceedings of SPIE 11260)
ISBN: 978-1-5106-3283-7
ISBN: 978-1-5106-3284-4
Paper 1126025, 10 S.
Conference "Fiber Lasers - Technology and Systems" <17, 2020, San Francisco/Calif.>
Fraunhofer ILT ()
Fiber Bragg Gratings; fiber lasers; frequency stabilization; high power; ultra-fast lasers

Within the EKOLAS consortium, which is part of the BMBF-funded EffiLAS (Efficient high-performance laser beam sources) research initiative, we are developing fiber Bragg gratings (FBG) directly written into multimode fibers. Fiber lasers are an established beam source for high-power materials processing due to their high efficiency and high average output power at high beam quality. By using FBG as fiber-integrated output mirrors, which is state-of-the-art in singlemode fiber lasers, we aim to reduce the complexity and increase robustness and reliability of multimode fiber resonators. Therefore, we are investigating the use of FBG as outcoupling mirrors in multimode high-power multimode fiber lasers. As a first step, we directly write an FBG into an active extra-large mode area (XLMA) fiber with <100 μm core and use the FBG as low reflective outcoupling mirror for the fiber resonator with simultaneous frequency stabilization. The setup delivers an output power of more than 800 W at 1077 nm. The output power of the system was limited by the pump laser setup and not by the FBG or its temperature. The FBG is passively cooled and the measured temperature of the fiber at the grating is below 130 °C at 800 W output power. As the next step, we set up an active XLMA-fiber (core <100 μm) with an FBG as outcoupling mirror into a laser resonator with water cooling of the resonator fiber and optimized pump coupling. This setup delivers an output power of more than 8 kW at 1077 nm without failure of the FBG.