Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Manipulating the heat load distribution by laser gain competition in TMI-limited fiber amplifiers

 
: Möller, F.; Distler, V.; Schreiber, T.; Eberhardt, R.; Tünnermann, A.

:

Dong, L. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Fiber Lasers XVII. Technology and Systems : 3-6 February 2020, San Francisco, California, United States
Bellingham, WA: SPIE, 2020 (Proceedings of SPIE 11260)
ISBN: 978-1-5106-3283-7
ISBN: 978-1-5106-3284-4
Paper 1126019, 8 S.
Conference "Fiber Lasers - Technology and Systems" <17, 2020, San Francisco/Calif.>
Englisch
Konferenzbeitrag
Fraunhofer IOF ()

Abstract
Supported by both experimental and simulated results, this contribution demonstrates the heat load distribution in a co-pumped, ytterbium (Yb)-doped fiber amplifier seeded with two different wavelengths can be significantly changed depending on the seed power ratio. Longitudinal temperature measurements in a Yb-doped 10.5 m 20/400 μm fiber confirm a significant shift of the heat load maximum by 3.5 m towards the fiber output when decreasing the seed power ratio from P1030nm/P1080nm = 1.7 to 20. In single-tone operation with a seed power of P1080nm = 3.5 W, the amplifier is limited by the onset of transverse mode instabilities at a power-level of 1950 W. However, dual-tone seeding with a seed power ratio up to P1030nm/P1080nm = 10 reduces the TMI-threshold dramatically down to 1050 W. Additionally we show, that the modal instability threshold is very susceptible to 1030 nm seed noise in the frequency regime up to 10 kHz.

: http://publica.fraunhofer.de/dokumente/N-589993.html