Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Thermomechanical local stress in assembled GaN LEDs investigated by Raman optical spectroscopy

 
: Signorini, R.; Conti, F.; Brugnolotto, E.; Pedron, D.; Liu, E.; Bhogaraju, S.K.; Elger, G.

:

Cheben, P. ; Society of Photo-Optical Instrumentation Engineers -SPIE-, Bellingham/Wash.:
Integrated Optics: Design, Devices, Systems, and Applications V : 1-3 April 2019, Prague, Czech Republic
Bellingham, WA: SPIE, 2019 (Proceedings of SPIE 11031)
ISBN: 978-1-5106-2729-1
ISBN: 978-1-5106-2728-4
Art. 110310I, 10 S.
Conference "Integrated Optics - Design, Devices, Systems, and Applications" <5, 2019, Prague>
International Symposium on Optics and Optoelectronics <2019, Prague>
Englisch
Konferenzbeitrag
Fraunhofer IVI ()

Abstract
Integrated circuits constitute a complex mosaic, where materials with different characteristics, grown or deposited in different ways and at different temperatures, are linked together in various geometries. It is well known that during and after processing of these devices, mechanical stresses develop in the layers. These stresses may be due to thermal steps, intrinsic stresses, which are inherent in the formation process of the film, or due to the geometry of the material. For example, high stresses are present in the substrate at film edges. The presence of local residual stress has an important effect on the electrical properties of electronic devices, in particular on the reliability and the lifetime of the semiconductor components. The present work focuses on the optical investigation of the thermomechanical stress of semiconductor materials used to realize new LED modules for front lighting application. Blue LEDs, based on gallium nitride (GaN) on sapphire, are bonded to a silicon carrier using gold silicon. Afterwards the sapphire is removed. The GaN on silicon devices are soldered by eutectic AuSn soldered on copper substrates, with different thicknesses. In the solder process different AuSn solder layer are achieved by varying the bond force. Raman spectroscopy is used to investigate the influence of the assembly process and assembly material on the local stress in the semiconductor. By that the physical, mechanical and chemical properties of the interconnect material can be analyzed. A model is developed to simulate the thermomechanical stress in the GaN LED assemblies. The Raman results validate the computational model. The phenomena are evaluated at room temperature, at -50°C and at 180°C.

: http://publica.fraunhofer.de/dokumente/N-586456.html