Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Seismic performance of mortarless reinforced masonry walls

 
: Huang, Liang; Lu, Yiqiu; Yan, Libo; Kasal, Bohumil; Wang, Lu; Zhang, Tongyue

:

Journal of building engineering 31 (2020), Art. 101368, 9 S.
ISSN: 2352-7102
Englisch
Zeitschriftenaufsatz
Fraunhofer WKI ()
reinforced masonry; mortarless walls; seismic behaviour; deformation capacity; equivalent viscous damping

Abstract
Reinforced masonry walls are commonly used as a primary lateral load resisting system in buildings in regions of moderate or high seismicity. Mortarless reinforced masonry (MLRM) walls are constructed using concrete masonry units placed without mortar and then interconnected by concrete grout. The absence of mortar can overcome several issues during the construction of conventional reinforced masonry walls. Previous research mainly focused on mortarless systems using three-dimensional interlocking blocks without vertical reinforcement. In this study, a total of six MLRM walls were constructed and tested under cyclic loadings to investigate their seismic behaviour. Experimental parameters included axial load ratio, shear span ratio, and vertical reinforcement ratio of the walls. Test results showed that the MLRM walls exhibited high stiffness, good deformation capacity, and reasonable energy dissipation capacity. The response of all six walls under cyclic loadings was controlled by 3–4 cracks formed at bed joints between the concrete masonry units, and their failure was dominated by flexure with the occurrence of slight shear sliding. The load-displacement envelope, strength, and energy dissipation of all tested MLRM walls are discussed.

: http://publica.fraunhofer.de/dokumente/N-586295.html