Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Double-Mesoscopic Hole-Transport-Material-Free Perovskite Solar Cells: Overcoming Charge-Transport Limitation by Sputtered Ultrathin Al2O3 Isolating Layer

 
: Mathiazhagan, Gayathri; Wagner, Lukas; Bogati, Shankar; Yasaroglu Ünal, Kübra; Bogachuk, Dmitry; Kroyer, Thomas; Mastroianni, Simone; Hinsch, Andreas

:
Preprint urn:nbn:de:0011-n-5812124 (1.5 MByte PDF)
MD5 Fingerprint: 79c6be8a2dcc2b707c4467b31c7690a0
Erstellt am: 13.3.2020


ACS applied nano materials 3 (2020), Nr.3, S.2463-2471
ISSN: 2574-0970
European Commission EC
H2020-Low-cost, low-carbon energy supply; 763989; APOLO
SmArt Designed Full Printed Flexible RObust Efficient Organic HaLide PerOvskite solar cells
Bundesministerium für Bildung und Forschung BMBF (Deutschland)
01DR19007; PROPER
Englisch
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ISE ()
Photovoltaik; Neuartige Photovoltaik-Technologien; Farbstoff- und Perowskitsolarzellen

Abstract
The electrically insulating space layer takes a fundamental role in monolithic carbon-graphite based perovskite solar cells (PSCs) and it has been established to prevent the charge recombination of electrons at the mp-TiO2/carbon-graphite (CG) interface. Thick 1 μm printed layers are commonly used for this purpose in the established triple-mesoscopic structures to avoid ohmic shunts and to achieve a high open circuit voltage. In this work, we have developed a reproducible large-area procedure to replace this thick space layer with an ultra-thin dense 40 nm sputtered Al2O3 which acts as a highly electrically insulating layer preventing ohmic shunts. Herewith, transport limitations related so far to the hole diffusion path length inside the thick mesoporous space layer have been omitted by concept. This will pave the way toward the development of next generation double-mesoscopic carbon-graphite-based PSCs with highest efficiencies. Scanning electron microscope, energy dispersive X-ray analysis, and atomic force microscopy measurements show the presence of a fully oxidized sputtered Al2O3 layer forming a pseudo-porous covering of the underlying mesoporous layer. The thickness has been finely tuned to achieve both electrical isolation and optimal infiltration of the perovskite solution allowing full percolation and crystallization. Photo voltage decay, light-dependent, and time-dependent photoluminescence measurements showed that the optimal 40 nm thick Al2O3 not only prevents ohmic shunts but also efficiently reduces the charge recombination at the mp-TiO2/CG interface and, at the same time, allows efficient hole diffusion through the perovskite crystals embedded in its pseudo-pores. Thus, a stable VOC of 1 V using CH3NH3PbI3 perovskite has been achieved under full sun AM 1.5 G with a stabilized device performance of 12.1%.

: http://publica.fraunhofer.de/dokumente/N-581212.html