Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of platelet content on the fabrication of colloidal gels for robocasting: Experimental analysis and numerical simulation

 
: Lorenz, M.; Dietemann, B.; Wahl, L.; Bierwisch, C.; Kraft, T.; Kruggel-Emden, H.; Travitzky, N.

:

Journal of the European Ceramic Society 40 (2020), Nr.3, S.811-825
ISSN: 0955-2219
Deutsche Forschungsgemeinschaft DFG
TR 250/12-1
Deutsche Forschungsgemeinschaft DFG
KR 1729/13-1
Englisch
Zeitschriftenaufsatz
Fraunhofer IWM ()
additive manufacturing; robocasting; colloidal gel; discrete element method; numerical simulation

Abstract
The preparation of colloidal gels containing different amounts of platelet and sphere-like powders is presented for the production of textured structures using robocasting and templated grain growth methods. The influence of platelet amount on paste fabrication and extrusion is investigated experimentally and numerically. Rheology of the pastes showed the need to vary coagulant and total filling fraction to obtain a paste suitable for robocasting. Pastes containing up to 0.15 platelet fractions were successfully extruded through 0.5mm and 1.5mm nozzle diameters. Pastes with platelet content higher than 0.18 and different filling fractions could only be extruded through the 1.5mm nozzle. Discrete Element Method simulation predicts that the extrusion of pastes containing a high amount of pla telets through a thinner nozzle was not possible due to powder morphology and size. Thus, the simulation supports the assumption that a high amount of platelets might be unprintable using thinner nozzles.

: http://publica.fraunhofer.de/dokumente/N-574679.html