Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Ionic CNT actuators and arrays - towards cost-efficient manufacturing through scalable dispersion and printing processes

 
: Neuhaus, Raphael; Bitzer, Veronika; Jablockin, Julia; Glanz, Carsten; Kolaric, Ivica; Siegert, Jörg; Bauernhansl, Thomas

:
Volltext urn:nbn:de:0011-n-5725929 (686 KByte PDF)
MD5 Fingerprint: e7e3b4a607fae6c8ec692729e9d41d8d
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 21.1.2020


Institute of Electrical and Electronics Engineers -IEEE-; American Society of Mechanical Engineers -ASME-:
IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2019. Proceedings : July 8-12, 2019, Hong Kong, China
Piscataway, NJ: IEEE, 2019
ISBN: 978-1-7281-2493-3
ISBN: 978-1-7281-2494-0
ISBN: 978-1-7281-2492-6
S.56-61
International Conference on Advanced Intelligent Mechatronics (AIM) <2019, Hong Kong>
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IPA ()
Aktor; Beschichten; Carbon Nanotube (CNT); dispersion; Elektroaktives Polymer (EAP); Lackieren; upscaling

Abstract
As one type of ionic electroactive polymer, carbon nanotube (CNT) actuators have attracted large interest from industry and academia due to their small actuation voltages, relatively large actuation response and their flexible and soft mechanical characteristics. Until today, manufacturing is based on labor-intensive laboratory techniques involving costly materials, tedious handling procedures and increased safety precautions. Additionally, their sophisticated chemical compositions, poor reproducibility and sensitivity to environmental influences have so far limited a wider application range. This paper investigates the key findings in optimizing and scaling up manufacturing related processes for CNT actuators and addresses new approaches towards simplified system integration. It was found that the predominantly used single-walled CNTs can be substituted by much cheaper multi-walled CNTs with having only minor effects on the actuator performance. First tests showed that by employing industrially scalable dispersion techniques and automated printing processes, CNT actuators can be manufactured faster, in larger quantities and with strongly reduced variance in actuator performance. New approaches for safe and simple system integration have been tested and new means of dielectric coating encapsulation were investigated.

: http://publica.fraunhofer.de/dokumente/N-572592.html