Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Electromagnetic Forming of Design Elements

 
: Linnemann, Maik; Psyk, Verena; Scheffler, Christian; Drossel, Welf-Guntram

:

Wulfsberg, J.P. ; Wissenschaftliche Gesellschaft für Produktionstechnik -WGP-:
Production at the leading edge of technology : Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), Hamburg, September 30 - October 2, 2019
Berlin: Springer, 2019
ISBN: 978-3-662-60416-8 (Print)
ISBN: 978-3-662-60417-5 (Online)
ISBN: 3-662-60416-7
ISBN: 978-3-662-60419-9
S.179-188
Wissenschaftliche Gesellschaft für Produktionstechnik (WGP Congress) <9, 2019, Hamburg>
German Academic Association for Production Technology (WGP Congress) <9, 2019, Hamburg>
Englisch
Konferenzbeitrag
Fraunhofer IWU ()
electromagnetic forming; can design; high-speed technology

Abstract
Nowadays, many industries have to distinguish themselves from other players in the market through innovative products and product designs. This also concerns aerosol cans. Therefore, suppliers seek solutions for producing individualized cans by embossing brand logos. Due to the almost fully exhausted deformation limits during the production of aerosol cans, this is hardly possible via conventional forming processes. As a high-speed technology, electromagnetic forming is a very promising method for overcoming the manufacturing limits of conventional processes. The paper shows a design for a tool for embossing aerosol cans. It gives insight into existing challenges and shows how to avoid or over-come them. An experimental verification proves the feasibility of the process and demonstrates that difficult forming operations are perfectly feasible with special forming processes like electromagnetic forming.

: http://publica.fraunhofer.de/dokumente/N-572440.html