Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Surface technology for additive manufacturing

Polymer surfaces and additive manufacturing
 
: Holländer, Andreas; Cosemans, Patrick

:
Volltext ()

Plasma Processes and Polymers 17 (2020), Nr.1, Art. 1900155, 13 S.
ISSN: 1612-8850
ISSN: 1612-8869
Bundesministerium fur Wirtschaft und Energie BMWi (Deutschland)
166 EBF; TCAM
Englisch
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer IAP ()

Abstract
Additive manufacturing (AM) technologies are recognized as promising new approaches for the production of industrial goods. One of the major drawbacks, however, is the surface quality of parts prepared by AM. In the present paper, the potential of applying classical surface technology to efficiently improve the surface properties of AM products is explored. The surface properties of parts produced by different AM technologies were investigated and showed rather large variations between various spots at the surface. Low-pressure plasma, as well as flame treatment, were found to provide a good activation also of the porous surfaces of parts prepared by selective laser sintering of PA12 (polyamide). Lacquering was found to tremendously reduce the roughness of AM products. The best results were obtained by the combination of lacquering and polishing of lacquers, which are optimized for polishing.

: http://publica.fraunhofer.de/dokumente/N-572091.html