Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Mikromechanisches durchstimmbares Fabry–Perot-Filter für die IR-Gasanalytik

Micromechanical tunable Fabry-Perot filter for IR gas analysis
 
: Neumann, N.; Heinze, M.; Stegbauer, H.-J.; Hiller, K.; Kurth, S.

:

Technisches Messen : TM 72 (2005), Nr.1, S.10-15
ISSN: 0340-837X
ISSN: 0171-8096 (Print)
ISSN: 2196-7113 (Online)
Deutsch
Zeitschriftenaufsatz
Fraunhofer IZM ()

Abstract
This contribution deals with design, fabrication and test of a micro-machined first order Fabry-Perot interferometer (FPI) intended for use as a tunable infrared (IR) filter in the (3-5) mum band. The technical approach minimizes mirror curvature by using 300 mum thick silicon (Si) mirror carriers for the coplanar fixed and movable mirrors of the FPI. Dielectric quarter-wave reflectance stacks consisting of alternating layers of silicon dioxide (SiO2) and polycrystalline silicon are used as mirrors. The moveable mirror consists of two parts to form a parallel spring suspension which provides the necessary vertical movement and minimizes any tilting of the movable mirror carrier. The cavity spacing is electrostatically driven and controlled. Tunable filters with a centre wavelength (CWL) of (4.5... 3.0) mum and a spectral bandwith (FWHM) of about 60 nm were tested and showed a peak transmittance of about 50%.

: http://publica.fraunhofer.de/dokumente/N-56733.html