Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Dispersion and Performance of a Nanoclay/Whey Protein Isolate Coating upon its Upscaling as a Novel Ready-to-Use Formulation for Packaging Converters

: Bugnicourt, Elodie; Brzoska, Nicola; Kucukpinar, Esra; Philippe, Séverine; Forlin, Enrico; Bianchin, Alvise; Schmid, Markus

Volltext ()

Polymers. Online resource 11 (2019), Nr.9, Art. 1410, 14 S.
ISSN: 2073-4360
European Commission EC
H2020; 686116; OptiNanoPro
Processing and control of novel nanomaterials in packaging, automotive and solar panel processing lines
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer IVV ()

Studies on composition optimisation showed that the mixing of nanoclays to whey protein-isolate (WPI)-based coating formulations offers an effective strategy to reduce the oxygen permeability of coated polymer films. The scaling up of the various processing stages of these formulations was undertaken to prove their industrial feasibility. The aim was to investigate the effect of various preparation methods at different production scales (pilot- and semi-industrial scale) on the barrier performance and morphological properties of the applied nanocomposites. A nano-enhanced composition was converted into a so-called “ready-to-use” formulation by means of a solid-state pre-dispersion process using ball-milling. The process yielded a nearly dust-free, free-flowing powder containing agglomerated particles, which can easily be mixed with water. The preparation of a coating formulation using the ready-to-use granules and its upscaling for roll-to-roll converting at pilot- and semi-industrial scale was also successfully implemented. The effects of both the production at various scales and ultrasound treatment on the morphology and barrier performance of the nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, as well as oxygen permeability measurements. Results have shown that the addition of nanoclays to WPI-based coating formulations ultimately led to significantly reduced oxygen permeabilities to 0.59 cm3, 100 µm·m−2·d−1·bar−1 (barrier improvement factor, BIF of 5.4) and 0.62 cm3, 100 µm·m−2·d−1·bar−1 (BIF of 5.1) in cases of pilot- and semi-industrial-processed coatings, respectively, compared to a reference without nanoclay. In both cases, a similar degree of nanoparticle orientation was achieved. It was concluded that the solid state pre-dispersion of the nanoplatelets during the production of the ready-to-use formulation is the predominant process determining the ultimate degree of nanoparticle orientation and dispersion state.