Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Combined Thermo-Electrical Simulation Model for Large-scale Battery Electrical Storage Systems

: Dancker, Jonte; Balischewski, Stephan; Wolter, Martin

Postprint urn:nbn:de:0011-n-5556002 (1.1 MByte PDF)
MD5 Fingerprint: cfef9918d5da9ec7d0e75cdba13dce1e
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 31.8.2019

Institute of Electrical and Electronics Engineers -IEEE-:
53rd International Universities Power Engineering Conference, UPEC 2018. Proceedings : 4th-7th September 2018, Glasgow, Scotland
Piscataway, NJ: IEEE, 2018
ISBN: 978-1-5386-2910-9
ISBN: 978-1-5386-2911-6
7 S.
International Universities Power Engineering Conference (UPEC) <53, 2018, Glasgow>
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IFF ()

The self-consumption of the peripheral equipment, especially the cooling system, of a large-scale battery electric storage systems (BESS) affects its overall efficiency. Simulation models can help estimating the efficiency in the design process, but existing models mostly focus on the electrical behavior of smaller storage systems not including peripheral equipment. Here, a model is developed that displays the electrical and thermal behavior of a large-scale BESS and includes its peripheral equipment. The model is validated with measurement data of an operating 1 MW system and it is shown that the model displays the electrical behavior with a relative deviation of 10 %; the thermal behavior with 27 %. Three parameters are varied investigating the impact of the cooling system on the efficiency: nominal thermal power, target temperature and temperature bandwidth of the cooling system. Decreasing the nominal power improves the overall efficiency, whereas varying the temperature bandwidth and target temperature has a minor effect.