Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Influence of Fundamental Model Uncertainties on Silicon Solar Cell Efficiency Simulations

 
: Wasmer, S.; Fell, A.; Greulich, J.M.

:
Postprint urn:nbn:de:0011-n-5488431 (1.1 MByte PDF)
MD5 Fingerprint: 347ea60f3f88979d7e8cb7405bac2499
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 25.6.2019


IEEE transactions on electron devices 66 (2019), Nr.1, S.524-532
ISSN: 0018-9383
Englisch
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ISE ()
Photovoltaik; Silicium-Photovoltaik; Charakterisierung von Prozess- und Silicium-Materialien; Herstellung und Analyse von hocheffizienten Solarzellen; Messtechnik und Produktionskontrolle

Abstract
We determine the uncertainties on simulated efficiencies of silicon solar cells due to uncertainties of the fundamental physical models. To determine these, we refit their parameters to the underlying measurement data. Using a metamodeling and Monte Carlo simulation approach, we then deduce how these propagate to the simulated solar cell efficiency. This is evaluated for 150-μm-thick 1 Qcm p-type standard and advanced silicon passivated emitter and rear cells (PERC), as well as for an ideal silicon solar cell. When sticking to the best-known set of physical models, we determine resulting efficiency uncertainties as low as 0.06% abs for usual PERC cells and 0.1% abs for an ideal cell. In a variance-based sensitivity analysis, we find the uncertainties of the bandgap and the hole density-of-states effective mass as well as the Auger recombination in the limiting case to dominate the efficiency uncertainty. In addition to these relatively low uncertainties, larger discrepancies may arise when applying different physical models for otherwise fixed device properties. We determine comparably large efficiency discrepancies of up to 0.6% abs for the two most prominent bandgap narrowing (BGN) models, and up to 0.15% abs for the two most recent parameterizations of free carrier absorption. We also show evidence that for the specific case of a strong space charge region being present at a recombining surface, Schenk's BGN model fails to replicate experiments. Those discrepancies highlight the necessity of further research on those models. Finally, an error of up to 0.08% abs is observed by simplifying diffused regions on textured surfaces to a planar geometry.

: http://publica.fraunhofer.de/dokumente/N-548843.html