Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

CNT-reinforced AlSi10Mg composite by selective laser melting: Microstructural and mechanical properties

 
: Liu, Xihe; Zhao, Congcong; Zhou, Xin; Eibl, Florian; Shen, Zhijian; Liu, Wei; Meiners, Wilhelm

:

Materials science and technology 35 (2019), Nr.9, S.1038-1045
ISSN: 0267-0836
ISSN: 1743-2847
Englisch
Zeitschriftenaufsatz
Fraunhofer ILT ()
aluminium alloy; carbon nanotube; selective laser melting (SLM); grain boundary

Abstract
Carbon nanotube (CNT)-AlSi10Mg composites were fabricated by selective laser melting (SLM). The influence of CNTs on the density, microstructure, and strength of SLM CNT-AlSi10Mg composites was investigated. The addition of CNTs over 0.1 wt-% significantly damaged the density due to the high surface energy of the CNTs. The network Si eutectic had no significant difference in either the SLM AlSi10Mg alloy or the CNT-AlSi10Mg composite. Reserved CNTs with a short scale were observed in the SLM CNT(0.5 wt-%)-AlSi10Mg composite. The ultimate tensile strength of the 0.05 wt-% CNT-AlSi10Mg composite was 441.2 ± 0.9 MPa, which was higher than that of AlSi10Mg alloy. The grain boundary strengthening played an important role in the reinforcement of CNT-AlSi10Mg composite because of the refined grain.

: http://publica.fraunhofer.de/dokumente/N-543687.html