Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

On the interplay of DLIP and LIPSS upon ultra-short laser pulse irradiation

: Alamri, Sabri; Fraggelakis, Fotis; Kunze, Tim; Krupop, Benjamin; Mincuzzi, Girolamo; Kling, Rainer; Lasagni, Andrés-Fabián

Volltext ()

Materials 12 (2019), Nr.7, Art. 1018, 9 S.
ISSN: 1996-1944
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer IWS ()
direct laser interference patterning; LIPSS; USP laser source; stainless steel; polyimide; sapphire

Controlling laser induced surface morphology is essential for developing specialized functional surfaces. This work presents novel, multi-scale periodic patterns with two-dimensional symmetry generated on stainless steel, polyimide and sapphire. The microstructures were realized by combining Direct Laser Interference Patterning with the generation of Laser Induced Periodic Surface Structures in a one-step process. An industrial, fiber femtosecond laser source emitting at 1030 nm with a pulse duration of 500 fs was utilized for the experiments. In the case of stainless steel, it was possible to create line-like or pillar-like surface patterns by rotating the polarization orientation with respect to the interference pattern. In the case of polyimide and sapphire, the absorption of the laser radiation was promoted by a multiphoton mechanism. In polyimide, grooves and pillars of several microns in depth were produced over an area much larger than the spot size. Finally, for sapphire, the simultaneous generation of interference-like pattern and laser induced periodic surface structures was realized. The results reported here provide valuable data on the feasibility to combine two state-of-the-art techniques with an industrial apparatus, to control the induced surface morphology.