Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Analysis of peel and shear forces after temperature cycle tests for electrical conductive adhesives

 
: Hoffmann, S.; Geipel, T.; Meinert, M.; Kraft, A.

:

Smets, A.:
33rd European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC 2017 : Proceedings of the international conference held in Amsterdam, The Netherlands, 25 September - 29 September 2017
München: WIP, 2017
ISBN: 978-3-936338-47-8
ISBN: 3-936338-47-7
S.183-186
European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC) <33, 2017, Amsterdam>
Englisch
Konferenzbeitrag
Fraunhofer ISE ()
photovoltaisches Modul; Systeme und Zuverlässigkeit; Photovoltaik; Photovoltaische Module und Kraftwerke; Modultechnologie; Module; technology; conductive adhesives; reliability

Abstract
Soldering of copper ribbons on busbars is the standard process for the series interconnection of solar cells in industrial PV modules. As an alternative interconnection approach electrical conductive adhesives (ECAs) can be used for cell interconnection. ECAs are lead free and can be processed at temperatures below 200°C. However, the higher costs and the lower adhesive forces between interconnector and solar cell compared to established solder-based interconnection prevented a larger market share until now. We present results of 90° peeltests according to DIN EN 61189-2:2006 and shear tests according to DIN EN 1465 for seven commercially available ECAs and a comparison to the electrical performance of corresponding 3-cell modules in the temperature cycle test according to IEC 61215. The results show that all samples pass the temperature cycle test with a loss of power below 5%. The measured peel forces decrease after TC600 whereas the shear forces remain at their initial level.

: http://publica.fraunhofer.de/dokumente/N-503991.html