Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Subsurface Deformation Generated by Orthogonal Cutting: Analytical Modeling and Experimental Verification

 
: Zhang, D.; Zhang, X.-M.; Leopold, J.; Ding, H.

:

Journal of manufacturing science and engineering 139 (2017), Nr.9, Art. 094502
ISSN: 1087-1357
ISSN: 1528-8935
Englisch
Zeitschriftenaufsatz
Fraunhofer IWU ()

Abstract
Subsurface deformation of the cutting process has attracted a great deal of attention due to its tight relationship with subsurface hardening, microstructure alteration, grain refinement, and white layer formation. To predict the subsurface deformation of the machined components, an analytical model is proposed in this paper. The mechanical and thermal loads exerted on the workpiece by the primary and tertiary shear zones are predicted by a combination of Oxley's predictive model and Fang's slip line field. The stress field and temperature field are calculated based on contact mechanics and the moving heat source theory, respectively. However, the elastic–plastic regime induced by the material yielding hinders the direct derivation of subsurface plastic deformation from the stress field and the work material constitutive model. To tackle this problem, a blending function of the increment of elastic strain is developed to derive the plastic strain. In addition, a sophisticated material constitutive model considering strain hardening, strain rate sensitivity, and thermal softening effects of work material is incorporated into this analytical model. To validate this model, finite element simulations of the subsurface deformation during orthogonal cutting of AISI 52100 steel are conducted. Experimental verification of the subsurface deformation is carried out through a novel subsurface deformation measurement technique based on digital image correlation (DIC) technique. To demonstrate applications of the subsurface deformation prediction, the subsurface microhardness of the machined component is experimentally tested and compared against the predicted values based on the proposed method.

: http://publica.fraunhofer.de/dokumente/N-503093.html