Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Modeling edge recombination in silicon solar cells

 
: Fell, Andreas; Schön, Jonas; Müller, Matthias; Wöhrle, Nico; Schubert, Martin C.; Glunz, Stefan W.

:
Postprint urn:nbn:de:0011-n-4917102 (688 KByte PDF)
MD5 Fingerprint: bc0298045908cfad08e38eb534e54ae8
© IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Erstellt am: 4.5.2018


IEEE Journal of Photovoltaics 8 (2018), Nr.2, S.428-434
ISSN: 2156-3381
ISSN: 2156-3403
European Commission EC
H2020; 655852; Quokka Maturation
A mature Quokka for everyone - advancing the capabilities and accessibility of numerical solar cell simulations
Bundesministerium für Wirtschaft und Technologie BMWi
0324145; PV-BAT400
PV-BAsisTechnologie für Hocheffiziente Module mit 400W Leistung und einer Leistungsdichte von 240 W/m²
Englisch
Zeitschriftenaufsatz, Elektronische Publikation
Fraunhofer ISE ()
modeling; silicon solar cell; simulation; Quokka; edge losses; Solarzellen - Entwicklung und Charakterisierung; Silicium-Photovoltaik; Herstellung und Analyse von hocheffizienten Solarzellen

Abstract
A new approach to model edge recombination in silicon solar cells is presented. The model accounts for recombination both at the edge of the quasi-neutral bulk as well as at an exposed space-charge-region (SCR), the latter via an edge-length-specific diode property with an ideality factor of 2: a localized J02,edge. The model is implemented in Quokka3, where the J02, edge is applied locally to the edges of the three-dimensional geometry, imposing less simplifying assumptions compared with the common way of applying it as an external diode. A “worst-case” value for J02,edge, assuming very high surface recombination, is determined by fitting to full detailed device simulations which resolve the SCR recombination. A value of ~19 nA/cm is found, which is shown to be largely independent of device properties. The new approach is applied to model the impact of edge recombination on full cell performance for a substantial variety of device properties. It is found that recombination at the quasi-neutral bulk edge does not increase the J02 of the dark J-V curve, but still shows a nonideal impact on the light J-V curve similar to the SCR recombination. This needs to be considered in the experimental evaluation of edge losses, which is commonly performed via fitting J02 to dark J-V curves.

: http://publica.fraunhofer.de/dokumente/N-491710.html