Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Enhancing the abrasion resistance of PMMA/ATH layers realised by means of atmospheric pressure plasma powder deposition on wood

 
: Wallenhorst, L.; Rerich, R.; Vovk, M.; Dahle, S.; Militz, H.; Ohms, G.; Viöl, W.

Campean, Mihaela (Hrsg.) ; Transilvania University of Brasov, Faculty of Wood Industry:
International Conference "Wood Science and Engineering in the Third Millennium", ICWSE 2017. Proceedings. Vol.2 : 11th edition, "Transilvania" University of Braşov, Romania, 02-04 November 2017
Brasov: Universitatea Transilvania din Brasov, 2017
S.801-805
International Conference Wood Science and Engineering in the Third Millennium (ICWSE) <11, 2017, Brasov/Romania>
Englisch
Konferenzbeitrag
Fraunhofer IST ()
plasma CVD coating; PMMA / ATH; abrasion; recycling

Abstract
In this article, we present the deposition and stabilisation of PMMA/ATH powder on wood and glass substrates in a cold atmospheric pressure plasma-spray process. For this purpose, the raw powder material was injected to the effluent plasma of a jet discharge to coat the substrate that is situated in a comparatively cold region of the afterglow. Scince the abrasion resistance of pure PMMA/ATH powder coatings deposited with the use of compressed air as process and carrier gas turns out to be very low, two variations to stabilise those coatings were tested. The replacement of compressed air as process and carrier gas by forming gas did not lead to an increased abrasion resistance, but the addition of phenol-formaldehyde (PF) powder successfully stabilised the coatings.

: http://publica.fraunhofer.de/dokumente/N-490727.html