Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Cold surface treatments on fiber-reinforced plastics by pulsed laser

Kalte Oberflächenvorbehandlung auf Faser-Kunststoff-Verbunden durch gepulste Laser
 
: Gebauer, Jana; Franke, Volker; Klotzbach, Udo; Beyer, Eckhard

:
Volltext urn:nbn:de:0011-n-4699882 (117 KByte PDF)
MD5 Fingerprint: 805274f4cda0111b5adcd121d7a0d0fc
Erstellt am: 17.10.2017


Kroll, Lothar (Ed.):
3rd International MERGE Technologies Conference 2017. Conference Proceedings : IMTC 2017 Lightweight Structures; Merge Technologies for Multifunctional Lightweight Structures; 21st - 22nd September 2017, TU Chemnitz
Zwickau: Verlag Wissenschaftliche Scripten, 2017
ISBN: 978-3-95735-066-4
ISBN: 3-95735-066-2
S.25-26
International MERGE Technologies Conference Lightweight Structures (IMTC) <3, 2017, Chemnitz>
Bundesministerium für Bildung und Forschung BMBF
VP2097548TA3
Englisch
Konferenzbeitrag, Elektronische Publikation
Fraunhofer IWS ()
laser processing; fiber reinforced plastic; selective matrix removal; lightweight; pulsed laser; surface pre-treatment

Abstract
The importance of lightweight materials increases in all aspects of manufacturing, e.g. automotive, sports equipment and aerospace [1]. Making fiber reinforced plastics suitable for use in mass production new technologies have to be developed to overcome existing challenges e.g. shorter cycle times or more efficient resource usage. Innovative laser systems are used for a full range of treatments for all materials, like structuring, drilling, joining and cutting [2] - [4]. This paper presents laser processes for surface treatment of fiber reinforced plastics and their potentials to improve adhesive bonding, molding processes and coating deposition. Pulsed laser ablation is offering a promising alternative to state of the art mechanical milling for material removal. The most important advantages of the laser are: non-contact processes, no tool wear, design flexibility and no need for post treatments. Especially selective matrix removal that exposes the reinforcing fibers without damaging them (as shown in figure 1) is a unique characteristic that only laser treatment can offer. This structure exhibits a surface enlargement, enables form lock and offers an undercut area over 100 μm depth. As a consequence ten times higher tensile strength is reached in pull-off tests compared to untreated surfaces. The laser structured organic sheet was injection molded with the matrix polymer on top of the structured zone. The next step will be the transfer of developments into industry to further improve the process. Laser based surface pre-treatment will be used to apply e.g. rip structures on semi-finished organic sheets and laser ablated cavities will be exerted to integrate inserts or sensors on fiber-reinforced plastic.

: http://publica.fraunhofer.de/dokumente/N-469988.html