Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Increase of lifetime for fine blanking tools

 
: Claus, Guy; Weber, Martin; Demmler, Matthias

:
Volltext (PDF; )

Procedia Engineering 183 (2017), S.45-52
ISSN: 1877-7058
International Conference on Sheet Metal (SheMet) <17, 2017, Palermo>
Englisch
Zeitschriftenaufsatz, Konferenzbeitrag, Elektronische Publikation
Fraunhofer IWU ()
Fraunhofer IST ()
Hochleistungsstahl; hohe Genauigkeit; heavy load condition; blanking; tool steel; heat treatment; Deep Cryogenic Treatment

Abstract
To improve the lifetime of blanking tools, the application of high quality steel, heat treatment and coatings has become an interesting issue for many European companies dealing with stamping, punching and blanking operations. Important trends such as longer lifetime, higher accuracy and higher complexity of the products are challenging and require more special materials and techniques. The technological solutions to improve the existing processes are not obvious because of the enormous amount of possibilities in available materials, heat and surface treatments such as PVD coatings for the envisaged industrial processes and applications. An in-depth research to understand the manufacturing processes with the consequence of an increased performance and lifetime of the tools as well as the opportunity of further optimization was the main goal of this project. In many blanking processes where heavy duty conditions are applied, the use of hard metals, durable coatings and wear resistant tool steel is already established to extend the lifetime. The tools studied in this project were applied without coatings. The increasing production rate and the use of high strength steel sheet induce wear, crack formation and flaking of blanking tools with consequent low lifetimes. This project studied the tribological synergy of the substrate-heat treatment-surface preparation relationship and their influence on lifetime in heavy load conditions. A preliminary study was performed on the cutting edges of special designed triangular punches made of several high alloyed steels which were heat treated in a conventional way and by deep cryogenic treatment after quenching. After this research some demonstration tools were tested in industrial conditions to show the feasibility of certain selected combinations.

: http://publica.fraunhofer.de/dokumente/N-445623.html