Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Powder injection moulding of metal-ceramic interpenetrating phase composites

 
: Hein, S.B.

European Powder Metallurgy Association -EPMA-:
Developing the powder metallurgy future. Proceedings. CD-ROM : 21 - 24 September 2014, Messezentrum Salzburg, Austria; Additive manufacturing; hard materials and diamond tools; hot isostatic prossing; new materials and applications; powder injection moulding; PM structural parts; Euro PM2014 Congress & Exhibition
Shrewsbury: EPMA, 2014
ISBN: 978-1-899072-44-6
International Powder Metallurgy Congress and Exhibition (Euro PM) <2014, Salzburg>
Englisch
Konferenzbeitrag
Fraunhofer IFAM ()

Abstract
Materials that combine metallic and ceramic properties are of interest for various applications, such as surgical instruments or grinding tools. Powder technology offers the possibility to mix metals and ceramics in form of their powders and process them to complex shapes by means of powder injection moulding. Thus, different material combinations were chosen in order to demonstrate a broad applicability of this approach. The produced composite materials were characterized regarding their densities, mechanical properties and microstructures. It could be observed that the powder injection molded samples showed rather typical densities for specimens produced by this process, up to 98.3 % relative density. The mechanical properties varied strongly mainly dependent upon the materials used in the composites. Thus, the range of mechanical properties is wide and leads to various possibilities to adjust certain properties to a desired level. In combination with the possibilities of the powder injection moulding process to produce near net shape parts cost-efficiently in large quantities, these versatile composite materials can be made accessible for various applications.

: http://publica.fraunhofer.de/dokumente/N-441979.html