Fraunhofer-Gesellschaft

Publica

Hier finden Sie wissenschaftliche Publikationen aus den Fraunhofer-Instituten.

Fabrication and characterization of a 20 MHz ultrasonic transducer using soft mold process

Poster presented at Joint IEEE International Symposium on the Applications of Ferroelectrics, European Conference on Applications of Polar Dielectrics & Workshop on Piezoresponse Force Microscopy, ISAF/ECAPD/PFM 2016, Darmstadt, 21.-25.8.2016
 
: Günther, Paul; Gebhardt, Sylvia; Neubert, Holger; Herzog, Thomas; Heuer, Henning; Walter, Susan

:
Poster urn:nbn:de:0011-n-4259078 (996 KByte PDF)
MD5 Fingerprint: a1fa7bfff5cef7b485c638eab3c692c4
Erstellt am: 9.12.2016


2016, 1 Folie
International Symposium on the Applications of Ferroelectrics (ISAF) <2016, Darmstadt>
European Conference on Applications of Polar Dielectrics (ECAPD) <2016, Darmstadt>
Workshop on Piezoresponse Force Microscopy (PFM) <2016, Darmstadt>
Englisch
Poster, Elektronische Publikation
Fraunhofer IKTS ()
ultrasonic transducer; high frequency; Soft-Mold-Technologie; micromolding; PZT

Abstract
High frequency ultrasonic transducers based on fine scale 1-3 piezocomposites enable high resolution in medical or material imaging. As increasing frequency requires decreasing pillar size and kerf width, the conventional dice-and-fill technique is limited by blade thickness and becomes more sophisticated with smaller dimensions. In contrast, the soft mold technique allows for fine-scale piezoceramic arrays with free design of pillar geometry and spatial distribution. Basis of the procedure are net-shaped master molds fabricated by structuring techniques known from microsystems technology, like deep reactive ion etching (DRIE) or LIGA process. From these, soft plastic templates are taken which are reusable. Therein a ceramic slurry based on lead zirconate titanate (PZT) is casted and demolded after drying. After debindering, sintering and filling with an epoxy polymer resulting 1-3 piezocomposites are lapped to the desired thickness, electroded and poled.In this contribution, the development of a 20 MHz ultrasonic transducer based on a 1-3 piezocomposite with circular pillars in hexagonal arrangement and sintered dimensions of 34 μm diameter, 160 μm height and 10 μm spacing is reported. 1-3 piezocomposites made of these structures show coupling coefficients kt = 0.6 at the thickness resonance of 20 MHz. First lateral resonance is measured at anuncritical frequency of 37 MHz. A single element ultrasonic probe has been manufactured by selection of appropriate backing and matching layers. For characterization of sensitivity and bandwidth pulse-echo curves have been investigated and will be presented. Manufacturing technique as well as experimental results on dielectric, electromechanical and acoustic properties will be explained in detail.

: http://publica.fraunhofer.de/dokumente/N-425907.html